Types, methods, techniques, and applications for microencapsulated phase change materials (MPCM): A review

Renewable and Sustainable Energy Reviews

Volumn 53, Issue , 2016, Pages 1059-1075

  Giro Paloma, Jessica ^a   Martínez, Mònica ^a   Cabeza, Luisa F ^b   Fernández, A Inés ^a  

^a UNIVERSITY OF BARCELONA   (Spain)

^b UNIVERSITY OF LLEIDA   (Spain)

Author keywords

Microencapsulated phase change material; Phase change material; Thermal energy storage

Indexed keywords

COREMAKING; HEAT STORAGE; MICROENCAPSULATION; THERMAL ENERGY;

CORE MATERIAL; ENERGY; ENERGY SYSTEMS; MICROENCAPSULATED PHASE CHANGE MATERIAL; PHASE CHANGE; RESEARCH AND DEVELOPMENT; THERMAL ENERGY STORAGE; THERMAL ENERGY STORAGE SYSTEMS; TYPE METHODS;

PHASE CHANGE MATERIALS;

EID: 84943773118     PISSN: 13640321     EISSN: 18790690     Source Type: Journal    
DOI: 10.1016/j.rser.2015.09.040     Document Type: Review

References (194)

1. B. Zalba, J.M. MarÍn, L.F. Cabeza, and H. Mehling Review on thermal energy storage with phase change: materials, heat transfer analysis and applications Appl Therm Eng 23 2003 251 283 10.1016/S1359-4311(02)00192-8
2. M. Pomianowski, P. Heiselberg, and Y. Zhang Review of thermal energy storage technologies based on PCM application in buildings Energy Build 67 2013 56 69 10.1016/j.enbuild.2013.08.006
3. R. Kumar, M. Misra, R. Kumar, D. Gupta, P. Khatri, B. Tak, and et al. Phase change materials: technology status and potential defence applications Def Sci J 61 2011 576 582 10.14429/dsj.61.363
4. (http://www.scopus.com/) n.d.
5. P. Sánchez, M.V. Sánchez-Fernandez, A. Romero, J.F. Rodríguez, and L. Sánchez-Silva Development of thermo-regulating textiles using paraffin wax microcapsules Thermochim Acta 498 2010 16 21 10.1016/j.tca.2009.09.005
6. K. Keyan, T. Ramachandran, O.L. Shamugasundaram, M. Balasubramaniam, and T. Ragavendra Microencapsulation of PCMs in textiles: a review. J Text Appar Technol Manag 7 2012 1 10
7. R. Baetens, B.P. Jelle, and A. Gustavsen Phase change materials for building applications: a state-of-the-art review Energy Build 42 2010 1361 1368 10.1016/j.enbuild.2010.03.026
8. V.V. Tyagi, and D. Buddhi PCM thermal storage in buildings: a state of art Renew Sustain Energy Rev 11 2007 1146 1166 10.1016/j.rser.2005.10.002
9. P. Arce, C. Castellón, A. Castell, and L.F. Cabeza Use of microencapsulated PCM in buildings and the effect of adding awnings Energy Build 44 2012 88 93 10.1016/j.enbuild.2011.10.028
10. E. Oró, A. Gil, L. Miró, G. Peiró, S. Álvarez, and L.F. Cabeza Thermal energy storage implementation using phase change materials for solar cooling and refrigeration applications Energy Procedia 30 2012 947 956 10.1016/j.egypro.2012.11.107
11. A. Gil, E. Oró, L. Miró, G. Peiró, Á. Ruiz, J.M. Salmerón, and et al. Experimental analysis of hydroquinone used as phase change material (PCM) to be applied in solar cooling refrigeration Int J Refrig 39 2014 95 103 10.1016/j.ijrefrig.2013.05.013
12. W. Lu, and S. a Tassou Characterization and experimental investigation of phase change materials for chilled food refrigerated cabinet applications Appl Energy 112 2013 1376 1382 10.1016/j.apenergy.2013.01.071
13. E. Oró, L. Miró, M.M. Farid, and L.F. Cabeza Thermal analysis of a low temperature storage unit using phase change materials without refrigeration system Int J Refrig 35 2012 1709 1714 10.1016/j.ijrefrig.2012.05.004
14. E. Oró, A. De Gracia, and L.F. Cabeza Active phase change material package for thermal protection of ice cream containers Int J Refrig 36 2013 102 109 10.1016/j.ijrefrig.2012.09.011
15. E. Oró, L.F. Cabeza, and M.M. Farid Experimental and numerical analysis of a chilly bin incorporating phase change material Appl Therm Eng 58 2013 61 67 10.1016/j.applthermaleng.2013.04.014
16. E. Oró, L. Miró, C. Barreneche, I. Martorell, M.M. Farid, and L.F. Cabeza Corrosion of metal and polymer containers for use in PCM cold storage Appl Energy 109 2013 449 453 10.1016/j.apenergy.2012.10.049
17. E. Günther, T. Schmid, H. Mehling, S. Hiebler, and L. Huang Subcooling in hexadecane emulsions Int J Refrig 33 2010 1605 1611 10.1016/j.ijrefrig.2010.07.022
18. Y. Dutil, D. Rousse, S. Lassue, L. Zalewski, and A.V.J. Joulin Modeling phase change materials behaviour in building applications: selected comments 2011 World Renewable Energy Congress Sweden
19. C.-C. Lin, K.-P. Yu, P. Zhao, and G. Whei-May Lee Evaluation of impact factors on VOC emissions and concentrations from wooden flooring based on chamber tests Build Environ 44 2009 525 533 10.1016/j.buildenv.2008.04.015
20. D. Rozanna, A. Salmiah, T.G. Chuah, R. Medyan, S. Thomas Choong, and M. Sa'ari A study on thermal characteristics of phase change material (PCM) in gypsum board for building application J Oil Palm Res 17 2005 41 46
21. F. Kuznik, J. Virgone, and J.-J. Roux Energetic efficiency of room wall containing PCM wallboard: a full-scale experimental investigation Energy Build 40 2008 148 156 10.1016/j.enbuild.2007.01.022
22. D. Feldman, D. Banu, D. Hawes, and E. Ghanbari Obtaining an energy storing building material by direct incorporation of an organic phase change material in gypsum wallboard Sol Energy Mater 22 1991 231 242 10.1016/0165-1633(91)90021-C
23. F. Kuznik, D. David, K. Johannes, and J.-J. Roux A review on phase change materials integrated in building walls Renew Sustain Energy Rev 15 2011 379 391 10.1016/j.rser.2010.08.019
24. A. Castell, I. Martorell, M. Medrano, G. Pérez, and L.F. Cabeza Experimental study of using PCM in brick constructive solutions for passive cooling Energy Build 42 2010 534 540
25. M.J. Kabbara, and N.B. Abdallah Experimental investigation on phase change material based thermal energy storage unit Procedia Comput Sci 19 2013 694 701 10.1016/j.procs.2013.06.092
26. L.F. Cabeza, M. Ibáñez, C. Solé, J. Roca, and M. Nogués Experimentation with a water tank including a PCM module Sol Energy Mater Sol Cells 90 2006 1273 1282 10.1016/j.solmat.2005.08.002
27. Jordan UVK. Realistic domestic hot-water profiles in different time scales IEA SHC. Task 26 Solar combisystems; 2001
28. H. Mehling, L.F. Cabeza, S. Hippeli, and S. Hiebler PCM-module to improve hot water heat stores with stratification Renew Energy 28 2003 699 711
29. D. Haillot, F. Nepveu, V. Goetz, X. Py, and M. Benabdelkarim High performance storage composite for the enhancement of solar domestic hot water systems Sol Energy 86 2012 64 77 10.1016/j.solener.2011.09.006
30. a Pasupathy, R. Velraj, and R.V. Seeniraj Phase change material-based building architecture for thermal management in residential and commercial establishments Renew Sustain Energy Rev 12 2008 39 64 10.1016/j.rser.2006.05.010
31. Y. Zheng, W. Zhao, J.C. Sabol, K. Tuzla, S. Neti, A. Oztekin, and et al. Encapsulated phase change materials for energy storage - characterization by calorimetry Sol Energy 87 2013 117 126 10.1016/j.solener.2012.10.003
32. S. Pendyala Macroencapsulation of phase change materials for thermal energy storage 2012 University of South Florida Scholar Commons Florida
33. B. Simon Microencapsulation: methods and industrial applications 2006 CRC Press Taylor & Francis Group 6000 Broken Sound Parkway NW, Suite 300 Boca Raton, Florida 33487-2742
34. A. Jamekhorshid, S.M. Sadrameli, and M. Farid A review of microencapsulation methods of phase change materials (PCMs) as a thermal energy storage (TES) medium Renew Sustain Energy Rev 31 2014 531 542 10.1016/j.rser.2013.12.033
35. G. Sukhorukov, a Fery, and H. Möhwald Intelligent micro- and nanocapsules. Prog Polym Sci 30 2005 885 897 10.1016/j.progpolymsci.2005.06.008
36. C. Castellón, I. Martorell, L.F. Cabeza, A.I. Fernández, and A.M. Manich Compatibility of plastic with phase change materials (PCM) Int J Energy Res 35 2011 765 771 10.1002/er.1723
37. J. Giro-Paloma, J.J. Roa, A.M. Díez-Pascual, E. Rayón, A. Flores, M. Martínez, and et al. Depth-sensing indentation applied to polymers: a comparison between standard methods of analysis in relation to the nature of the materials Eur Polym J 49 2013 4047 4053 10.1016/j.eurpolymj.2013.09.010
38. N. Soares, J.J. Costa, a R. Gaspar, and P. Santos Review of passive PCM latent heat thermal energy storage systems towards buildings′ energy efficiency Energy Build 59 2013 82 103 10.1016/j.enbuild.2012.12.042
39. V.V. Tyagi, S.C. Kaushik, S.K. Tyagi, and T. Akiyama Development of phase change materials based microencapsulated technology for buildings: a review Renew Sustain Energy Rev 15 2011 1373 1391 10.1016/j.rser.2010.10.006
40. Y. Dutil, D. Rousse, S. Lassue, L. Zalewski, A. Joulin, J. Virgone, and et al. Modeling phase change materials behavior in building applications: comments on material characterization and model validation Renew Energy 61 2014 132 135 10.1016/j.renene.2012.10.027
41. H. Wang, J.P. Wang, X. Wang, W. Li, and X. Zhang Preparation and properties of microencapsulated phase change materials containing two-phase core materials Ind Eng Chem Res 52 2013 14706 14712 10.1021/ie401055r
42. Y. Ma, S. Sun, J. Li, and G. Tang Preparation and thermal reliabilities of microencapsulated phase change materials with binary cores and acrylate-based polymer shells Thermochim Acta 588 2014 38 46 10.1016/j.tca.2014.04.023
43. L.F. Cabeza, a Castell, C. Barreneche, a de Gracia, and a I. Fernández Materials used as PCM in thermal energy storage in buildings: a review Renew Sustain Energy Rev 15 2011 1675 1695 10.1016/j.rser.2010.11.018
44. G.J. Suppes, M.J. Goff, and S. Lopes Latent heat characteristics of fatty acid derivatives pursuant phase change material applications Chem Eng Sci 58 2003 1751 1763 10.1016/S0009-2509(03)00006-X
45. A. Sharma, V.V. Tyagi, C.R. Chen, and D. Buddhi Review on thermal energy storage with phase change materials and applications Renew Sustain Energy Rev 13 2009 318 345 10.1016/j.rser.2007.10.005
46. Das A. Study of microencapsulation in dyeing n.d. (http://es.slideshare.net/Arkatextile/microencapsulation-in-dyeing).
47. F.L. Tan, S.F. Hosseinizadeh, J.M. Khodadadi, and L. Fan Experimental and computational study of constrained melting of phase change materials (PCM) inside a spherical capsule Int J Heat Mass Transf 52 2009 3464 3472 10.1016/j.ijheatmasstransfer.2009.02.043
48. G.H. Zhang, S.A.F. Bon, and C.Y. Zhao Synthesis, characterization and thermal properties of novel nanoencapsulated phase change materials for thermal energy storage Sol Energy 86 2012 1149 1154 10.1016/j.solener.2012.01.003
49. X. Wang, X. Zhang, X. Tao, and K. Yick Structure and thermal stability of microencapsulated phase-change materials Colloid Polym Sci 282 2004 330 336 10.1007/s00396-003-0925-y
50. A.M. Khudhair, and M.M. Farid A review on energy conservation in building applications with thermal storage by latent heat using phase change materials Energy Convers Manag 45 2004 263 275 10.1016/S0196-8904(03)00131-6
51. X. Qiu, L. Lu, J. Wang, G. Tang, and G. Song Preparation and characterization of microencapsulated n-octadecane as phase change material with different n-butyl methacrylate-based copolymer shells Sol Energy Mater Sol Cells 128 2014 102 111 10.1016/j.solmat.2014.05.020
52. C. Alkan, A. SarI, A. Karaipekli, and O. Uzun Preparation, characterization, and thermal properties of microencapsulated phase change material for thermal energy storage Sol Energy Mater Sol Cells 93 2009 143 147 10.1016/j.solmat.2008.09.009
53. X. Qiu, W. Li, G. Song, X. Chu, and G. Tang Microencapsulated n-octadecane with different methylmethacrylate-based copolymer shells as phase change materials for thermal energy storage Energy 46 2012 188 199 10.1016/j.energy.2012.08.037
54. Y. Ma, X. Chu, G. Tang, and Y. Yao Synthesis and thermal properties of acrylate-based polymer shell microcapsules with binary core as phase change materials Mater Lett 91 2013 133 135 10.1016/j.matlet.2012.09.084
55. X. Qiu, G. Song, X. Chu, X. Li, and G. Tang Microencapsulated n-alkane with p(n-butyl methacrylate-co-methacrylic acid) shell as phase change materials for thermal energy storage Sol Energy 91 2013 212 220 10.1016/j.solener.2013.01.022
56. A. SarI, C. Alkan, A. Karaipekli, and O. Uzun Microencapsulated n-octacosane as phase change material for thermal energy storage Sol Energy 83 2009 1757 1763 10.1016/j.solener.2009.05.008
57. C. Alkan, A. SarI, and A. Karaipekli Preparation, thermal properties and thermal reliability of microencapsulated n-eicosane as novel phase change material for thermal energy storage Energy Convers Manag 52 2011 687 692 10.1016/j.enconman.2010.07.047
58. S. Alay, C. Alkan, and F. Göde Synthesis and characterization of poly(methyl methacrylate)/n-hexadecane microcapsules using different cross-linkers and their application to some fabrics Thermochim Acta 518 2011 1 8 10.1016/j.tca.2011.01.014
59. Y. Wang, H. Shi, T.D. Xia, T. Zhang, and H.X. Feng Fabrication and performances of microencapsulated paraffin composites with polymethylmethacrylate shell based on ultraviolet irradiation-initiated Mater Chem Phys 135 2012 181 187 10.1016/j.matchemphys.2012.04.050
60. Y. Taguchi, H. Yokoyama, H. Kado, and M. Tanaka Preparation of PCM microcapsules by using oil absorbable polymer particles Colloids Surf: Physicochem Eng Asp 301 2007 41 47 10.1016/j.colsurfa.2006.12.019
61. G. Tzvetkov, B. Graf, R. Wiegner, J. Raabe, C. Quitmann, and R. Fink Soft X-ray spectromicroscopy of phase-change microcapsules Micron 39 2008 275 279 10.1016/j.micron.2007.04.002
62. C. Alkan, and A. Sari Fatty acid/poly(methyl methacrylate) (PMMA) blends as form-stable phase change materials for latent heat thermal energy storage Sol Energy 82 2008 118 124 10.1016/j.solener.2007.07.001
63. J. Giro-Paloma, G. Oncins, C. Barreneche, M. Martínez, A.I. Fernández, and L.F. Cabeza Physico-chemical and mechanical properties of microencapsulated phase change material Appl Energy 109 2013 441 448 10.1016/j.apenergy.2012.11.007
64. J.-F. Su, X.-Y. Wang, and H. Dong Influence of temperature on the deformation behaviors of melamine-formaldehyde microcapsules containing phase change material Mater Lett 84 2012 158 161 10.1016/j.matlet.2012.06.074
65. M. Palanikkumaran, K.K. Gupta, A.K. Agrawal, and M. Jassal Effect of emulsion preparation method on microencapsulation of n -octadecane using melamine-formaldehyde pre-polymers Indian J Fibre Text Res 35 2010 101 106
66. C.Y. Zhao, and G.H. Zhang Review on microencapsulated phase change materials (MEPCMs): fabrication, characterization and applications Renew Sustain Energy Rev 15 2011 3813 3832 10.1016/j.rser.2011.07.019
67. L. Sánchez-Silva, J.F. Rodríguez, A. Romero, A.M. Borreguero, M. Carmona, and P. Sánchez Microencapsulation of PCMs with a styrene-methyl methacrylate copolymer shell by suspension-like polymerisation Chem Eng J 157 2010 216 222 10.1016/j.cej.2009.12.013
68. L. Sánchez, P. Sánchez, A. de Lucas, M. Carmona, and J.F. Rodríguez Microencapsulation of PCMs with a polystyrene shell Colloid Polym Sci 285 2007 1377 1385 10.1007/s00396-007-1696-7
69. L. Sánchez, P. Sánchez, M. Carmona, A. de Lucas, and J.F. Rodríguez Influence of operation conditions on the microencapsulation of PCMs by means of suspension-like polymerization Colloid Polym Sci 286 2008 1019 1027 10.1007/s00396-008-1864-4
70. A.M. Borreguero, M. Carmona, M.L. Sanchez, J.L. Valverde, and J.F. Rodriguez Improvement of the thermal behaviour of gypsum blocks by the incorporation of microcapsules containing PCMS obtained by suspension polymerization with an optimal core/coating mass ratio Appl Therm Eng 30 2010 1164 1169 10.1016/j.applthermaleng.2010.01.032
71. Y. Wang, T.D. Xia, H.X. Feng, and H. Zhang Stearic acid/polymethylmethacrylate composite as form-stable phase change materials for latent heat thermal energy storage Renew Energy 36 2011 1814 1820 10.1016/j.renene.2010.12.022
72. O.H. Kim, K. Lee, K. Kim, B.H. Lee, and S. Choe Effect of PVA in dispersion polymerization of MMA Polymer 47 2006 1953 1959 10.1016/j.polymer.2006.01.025
73. Kawaguchi S, Ito K. Adv Polym Sci 175
74. A. SarI, C. Alkan, and A. Karaipekli Preparation, characterization and thermal properties of PMMA/n-heptadecane microcapsules as novel solid-liquid microPCM for thermal energy storage Appl Energy 87 2010 1529 1534 10.1016/j.apenergy.2009.10.011
75. Mollidain SM. Pharmacy (pharmaceutical technology). SHIFT- II n.d. (http://www.slideshare.net/mollidain/microencapsulation-by-sandeep).
76. Y. Choi, J.G. Lee, J.H. Kim, and H. Yang Preparation of microcapsules containing phase change materials as heat transfer media by in-situ polymerization J Ind Eng Chem 7 6 2001 358 362
77. N.V.N. Jyothi, P.M. Prasanna, S.N. Sakarkar, K.S. Prabha, P.S. Ramaiah, and G.Y. Srawan Microencapsulation techniques, factors influencing encapsulation efficiency J Microencapsul 27 2010 187 197 10.3109/02652040903131301
78. B. Sumiga, E. Knez, M. Vrtačnik, V. Ferk-Savec, M. Starešinič, and B. Boh Production of melamine-formaldehyde pcm microcapsules with ammonia scavenger used for residual formaldehyde reduction Acta Chim Slov 58 2011 14 25
79. B. Boh, E. Knez, and M. Staresinic Microencapsulation of higher hydrocarbon phase change materials by in situ polymerization J Microencapsul 22 2005 715 735 10.1080/02652040500162139
80. B. Boh, and B. Šumiga Microencapsulation technology and its applications in building construction materials RMZ - Mater Geoenviron 55 2008 329 344
81. R. Yang, H. Xu, and Y. Zhang Preparation, physical property and thermal physical property of phase change microcapsule slurry and phase change emulsion Sol Energy Mater Sol Cells 80 2003 405 416 10.1016/j.solmat.2003.08.005
82. R. Yang, Y. Zhang, X. Wang, Y. Zhang, and Q. Zhang Preparation of n-tetradecane-containing microcapsules with different shell materials by phase separation method Sol Energy Mater Sol Cells 93 2009 1817 1822 10.1016/j.solmat.2009.06.019
83. G. Fang, H. Li, F. Yang, X. Liu, and S. Wu Preparation and characterization of nano-encapsulated n-tetradecane as phase change material for thermal energy storage Chem Eng J 153 2009 217 221 10.1016/j.cej.2009.06.019
84. Z. Chen, L. Cao, G. Fang, and F. Shan Synthesis and characterization of microencapsulated paraffin microcapsules as shape-stabilized thermal energy storage materials Nanoscale Microscale Thermophys Eng 17 2013 112 123 10.1080/15567265.2012.761305
85. X.Q. Song, Y.X. Li, and J.W. Wang Preparation and characterization of hexadecane microcapsule phase change materials by in situ polymerization Adv Mater Res 815 2013 367 370 10.4028/www.scientific.net/AMR.815.367
86. O. Pascu, R. Garcia Valls, and M. Giamberini Interfacial polymerization of an epoxy resin and carboxylic acids for the synthesis of microcapsules Polym Int 57 2008 995 1006 10.1002/pi.2438
87. C. Liang, X. Lingling, S. Hongbo, and Z. Zhibin Microencapsulation of butyl stearate as a phase change material by interfacial polycondensation in a polyurea system Energy Convers Manag 50 2009 723 729 10.1016/j.enconman.2008.09.044
88. 2 phase change composite for thermal energy storage ACS Sustain Chem Eng 1 2013 374 380 10.1021/sc300082m
89. B.V.N. Nagavarma, H.K.S. Yadav, a Ayaz, L.S. Vasudha, and H.G. Shivakumar Different techniques for preparation of polymeric nanoparticles - a review Asian J Pharm Clin Res 5 2012 16 23
90. Shivakumar B. Microencapsulation. Pharmacy. Kottam institute of pharmacy, A.P n.d.
91. Y. Özonur, M. Mazman, H.Ö. Paksoy, and H. Evliya Microencapsulation of coco fatty acid mixture for thermal energy storage with phase change material Int J Energy Res 30 2006 741 749 10.1002/er.1177
92. G. Fang, H. Li, and X. Liu Preparation and properties of lauric acid/silicon dioxide composites as form-stable phase change materials for thermal energy storage Mater Chem Phys 122 2010 533 536 10.1016/j.matchemphys.2010.03.042
93. H. Li, G. Fang, and X. Liu Synthesis of shape-stabilized paraffin/silicon dioxide composites as phase change material for thermal energy storage J Mater Sci 45 2009 1672 1676 10.1007/s10853-009-4146-8
94. 2 composite PCM by in situ Cu doping Sol Energy Mater Sol Cells 105 2012 242 248 10.1016/j.solmat.2012.06.012
95. Ghosh SK, editor. Functional coatings. Weinheim: Wiley-VCH Verlag GmbH & Co. KGaA; 2006, p. 1-357
96. H.-T. Wu, and M.-W. Yang Precipitation kinetics of PMMA sub-micrometric particles with a supercritical assisted-atomization process J Supercrit Fluids 59 2011 98 107 10.1016/j.supflu.2011.08.001
97. 2 J Supercrit Fluids 71 2012 45 63 10.1016/j.supflu.2012.07.007
98. a M. Borreguero, J.L. Valverde, J.F. Rodríguez, a H. Barber, J.J. Cubillo, and M. Carmona Synthesis and characterization of microcapsules containing Rubitherm®RT27 obtained by spray drying Chem Eng J 166 2011 384 390 10.1016/j.cej.2010.10.055
99. M.N.A. Hawlader, M.S. Uddin, and M.M. Khin Microencapsulated PCM thermal-energy storage system Appl Energy 74 2003 195 202 10.1016/S0306-2619(02)00146-0
100. B. Fei, H. Lu, K. Qi, H. Shi, T. Liu, X. Li, and et al. Multi-functional microcapsules produced by aerosol reaction J Aerosol Sci 39 2008 1089 1098 10.1016/j.jaerosci.2008.07.007
101. L. De Windt, D. Dabo, S. Lidelöw, R. Badreddine, and A. Lagerkvist MSWI bottom ash used as basement at two pilot-scale roads: comparison of leachate chemistry and reactive transport modeling Waste Manag 31 2011 267 280 10.1016/j.wasman.2010.06.002
102. Y. Jin, W. Lee, Z. Musina, and Y. Ding A one-step method for producing microencapsulated phase change materials Particuology 8 2010 588 590 10.1016/j.partic.2010.07.009
103. Z. Youssef, A. Delahaye, L. Huang, F. Trinquet, L. Fournaison, C. Pollerberg, and et al. State of the art on phase change material slurries Energy Convers Manag 65 2013 120 132 10.1016/j.enconman.2012.07.004
104. P. Zhang, Z.Z. Qiu, and M. He Review on microencapsulated phase change materials (MPCM) slurries: materials, rheological behavior and applications Adv. Mater. Res. 953-954 2014 1109 1112 10.4028/www.scientific.net/AMR.953-954.1109
105. G.H. Zhang, and C.-Y. Zhao Thermal and rheological properties of microencapsulated phase change materials Renew Energy 36 2011 2959 2966 10.1016/j.renene.2011.04.002
106. Dry powder mixes comprising phase change materials. Patent US 5370814, n.d.
107. Z. Chen, and G. Fang Preparation and heat transfer characteristics of microencapsulated phase change material slurry: a review Renew Sustain Energy Rev 15 2011 4624 4632 10.1016/j.rser.2011.07.090
108. Baronetto S, Gianluca S, Francesco G, Marco P. Numerical model of a slurry PCM-based solar thermal collector. Proceedings of the 8th international symposium on heating, ventilation and air conditioning. Lecture notes in electrical engineering; 2014. p. 13-20. doi: 10.1007/978-3-642-39578-9-2
109. B.D. Knodel, D.M. France, U.S. Choi, and M.W. Wambsganss Heat transfer and pressure drop in ice-water slurries Appl Therm Eng 20 2000 671 685 10.1016/S1359-4311(99)00046-0
110. E. Stamatiou, and M. Kawaji Thermal and flow behavior of ice slurries in a vertical rectangular channel Part I: local distribution measurements in adiabatic flow. Int J Heat Mass Transf 48 2005 3527 3543 10.1016/j.ijheatmasstransfer.2005.03.020
111. H. Inaba, Y. Zhang, A. Horibe, and N. Haruki Numerical simulation of natural convection of latent heat phase-change-material microcapsulate slurry packed in a horizontal rectangular enclosure heated from below and cooled from above Heat Mass Transf 43 2007 459 470 10.1007/s00231-006-0121-y
112. A. SarI, A. Biçer, A. Karaipekli, C. Alkan, and A. Karadag Synthesis, thermal energy storage properties and thermal reliability of some fatty acid esters with glycerol as novel solid-liquid phase change materials Sol Energy Mater Sol Cells 94 2010 1711 1715 10.1016/j.solmat.2010.05.033
113. W. Lu, and S.A. Tassou Experimental study of the thermal characteristics of phase change slurries for active cooling Appl Energy 91 2012 366 374 10.1016/j.apenergy.2011.10.004
114. L. Chen, T. Wang, Y. Zhao, and X.-R. Zhang Characterization of thermal and hydrodynamic properties for microencapsulated phase change slurry (MPCS) Energy Convers Manag 79 2014 317 333 10.1016/j.enconman.2013.12.026
115. P. Zhang, and Z.W. Ma An overview of fundamental studies and applications of phase change material slurries to secondary loop refrigeration and air conditioning systems Renew Sustain Energy Rev 16 2012 5021 5058 10.1016/j.rser.2012.03.059
116. A. a Al-Abidi, S. Bin Mat, K. Sopian, M.Y. Sulaiman, C.H. Lim, and A. Th Review of thermal energy storage for air conditioning systems Renew Sustain Energy Rev 16 2012 5802 5819 10.1016/j.rser.2012.05.030
117. M. Domínguez, and C. García Aprovechamiento de los materiales de cambio de fase (PCM) en la climatización Inf Tecnol 20 2009 107 115
118. M. Delgado, A. Lázaro, J. Mazo, and B. Zalba Review on phase change material emulsions and microencapsulated phase change material slurries: materials, heat transfer studies and applications Renew Sustain Energy Rev 16 2012 253 273 10.1016/j.rser.2011.07.152
119. J.L. Alvarado, C. Marsh, C. Sohn, G. Phetteplace, and T. Newell Thermal performance of microencapsulated phase change material slurry in turbulent flow under constant heat flux Int J Heat Mass Transf 50 2007 1938 1952 10.1016/j.ijheatmasstransfer.2006.09.026
120. L. Huang, C. Doetsch, and C. Pollerberg Low temperature paraffin phase change emulsions Int J Refrig 33 2010 1583 1589 10.1016/j.ijrefrig.2010.05.016
121. P. Zhang, Z.W. Ma, and R.Z. Wang An overview of phase change material slurries: MPCS and CHS Renew Sustain Energy Rev 14 2010 598 614 10.1016/j.rser.2009.08.015
122. M.J. Huang, P.C. Eames, S. McCormack, P. Griffiths, and N.J. Hewitt Microencapsulated phase change slurries for thermal energy storage in a residential solar energy system Renew Energy 36 2011 2932 2939 10.1016/j.renene.2011.04.004
123. P.C. Augood, M. Newborough, and D.J. Highgate Thermal behaviour of phase-change slurries incorporating hydrated hydrophilic polymeric particles Exp Therm Fluid Sci 25 2001 457 468 10.1016/S0894-1777(01)00099-1
124. P.B. Salunkhe, and P.S. Shembekar A review on effect of phase change material encapsulation on the thermal performance of a system Renew Sustain Energy Rev 16 2012 5603 5616 10.1016/j.rser.2012.05.037
125. S. Zhang, and J. Niu Experimental investigation of effects of supercooling on microencapsulated phase-change material (MPCM) slurry thermal storage capacities Sol Energy Mater Sol Cells 94 2010 1038 1048 10.1016/j.solmat.2010.02.022
126. R. Zeng, X. Wang, B. Chen, Y. Zhang, J. Niu, X. Wang, and et al. Heat transfer characteristics of microencapsulated phase change material slurry in laminar flow under constant heat flux Appl Energy 86 2009 2661 2670 10.1016/j.apenergy.2009.04.025
127. L. Huang, E. Günther, C. Doetsch, and H. Mehling Subcooling in PCM emulsions - Part 1: Experimental Thermochim Acta 509 2010 93 99 10.1016/j.tca.2010.06.006
128. E. Günther, L. Huang, H. Mehling, and C. Dötsch Subcooling in PCM emulsions - Part 2: interpretation in terms of nucleation theory Thermochim Acta 522 2011 199 204 10.1016/j.tca.2011.04.027
129. G.B.J. De Boer, C. de Weerd, D. Thoenes, and H.W.J. Goossens Laser diffraction spectrometry: Fraunhofer diffraction versus mie scattering Part Part Syst Charact 4 1987 14 19 10.1002/ppsc.19870040104
130. F. Yu, Z.-H. Chen, and X.-R. Zeng Preparation, characterization, and thermal properties of microPCMs containing n-dodecanol by using different types of styrene-maleic anhydride as emulsifier Colloid Polym Sci 287 2009 549 560 10.1007/s00396-009-2001-8
131. L. Bayés-García, L. Ventolà, R. Cordobilla, R. Benages, T. Calvet, and M. a Cuevas-Diarte Phase change materials (pcm) microcapsules with different shell compositions: preparation, characterization and thermal stability Sol Energy Mater Sol Cells 94 2010 1235 1240 10.1016/j.solmat.2010.03.014
132. Bajare D, Kazjonovs J, Korjakins A, Merijs-Meri R. Development of cement and lime based plaster with microencapsulated phase change materials (PCM). In: Proceedings of the 12th international conference on energy storage; 2012. p. 1-7
133. L. Pan, Q. Tao, S. Zhang, S. Wang, J. Zhang, S. Wang, and et al. Preparation, characterization and thermal properties of micro-encapsulated phase change materials Sol Energy Mater Sol Cells 98 2012 66 70 10.1016/j.solmat.2011.09.020
134. 2 shell as thermal energy storage materials Chem Eng J 163 2010 154 159 10.1016/j.cej.2010.07.054
135. Y. Fang, S. Kuang, X. Gao, and Z. Zhang Preparation and characterization of novel nanoencapsulated phase change materials Energy Convers Manag 49 2008 3704 3707 10.1016/j.enconman.2008.06.027
136. H. Zhang, and X. Wang Fabrication and performances of microencapsulated phase change materials based on n-octadecane core and resorcinol-modified melamine-formaldehyde shell Colloids Surf: Physicochem Eng Asp 332 2009 129 138 10.1016/j.colsurfa.2008.09.013
137. C. Alkan Enthalpy of melting and solidification of sulfonated paraffins as phase change materials for thermal energy storage Thermochim Acta 451 2006 126 130 10.1016/j.tca.2006.09.010
138. T. Zhang, Y. Wang, H. Shi, and W. Yang Fabrication and performances of new kind microencapsulated phase change material based on stearic acid core and polycarbonate shell Energy Convers Manag 64 2012 1 7 10.1016/j.enconman.2012.04.011
139. M. Pomianowski, P. Heiselberg, R.L. Jensen, R. Cheng, and Y. Zhang A new experimental method to determine specific heat capacity of inhomogeneous concrete material with incorporated microencapsulated-PCM Cem Concr Res 55 2014 22 34 10.1016/j.cemconres.2013.09.012
140. M. Ostrý, R. Pøikryl, P. Charvát, T. Mlcoch, and B. Bakajová Laboratory assessment of micro-encapsulated phase-change materials Materiali in tehnologije / Materials and technology00 46 2012 531 534
141. H. Zhang, S. Sun, X. Wang, and D. Wu Fabrication of microencapsulated phase change materials based on n-octadecane core and silica shell through interfacial polycondensation. Colloids Surf: Physicochem Eng Asp 389 2011 104 117 10.1016/j.colsurfa.2011.08.043
142. J. Giro-Paloma, C. Barreneche, M. Delgado, M. Martínez, A.I. Fernández, and L.F. Cabeza Physicochemical and thermal study of a MPCM of PMMA shell and paraffin wax as a core Energy Procedia 48 2014 347 354 10.1016/j.egypro.2014.02.040
143. H. Huang, and F. Haghighat Building materials VOC emissions - a systematic parametric study Build Environ 38 2003 995 1005 10.1016/S0360-1323(03)00062-3
144. S. Kim, Y.-K. Choi, K.-W. Park, and J.T. Kim Test methods and reduction of organic pollutant compound emissions from wood-based building and furniture materials Bioresour Technol 101 2010 6562 6568 10.1016/j.biortech.2010.03.059
145. C. Jia, S. Batterman, and C. Godwin VOCs in industrial, urban and suburban neighborhoods, Part 1: indoor and outdoor concentrations, variation, and risk drivers Atmos Environ 42 2008 2083 2100 10.1016/j.atmosenv.2007.11.055
146. C. Jia, S. Batterman, C. Godwin, S. Charles, and J.-Y. Chin Sources and migration of volatile organic compounds in mixed-use buildings Indoor Air 20 2010 357 369 10.1111/j.1600-0668.2010.00643.x
147. U. Schlink, M. Rehwagen, M. Damm, M. Richter, M. Borte, and O. Herbarth Seasonal cycle of indoor-VOCs: comparison of apartments and cities Atmos Environ 38 2004 1181 1190 10.1016/j.atmosenv.2003.11.003
148. Y. Zhang, and Y. Xu Characteristics and correlations of VOC emissions from building materials Int J Heat Mass Transf 46 2003 4877 4883 10.1016/S0017-9310(03)00352-1
149. C.-S. Lee, F. Haghighat, and W.S. Ghaly A study on VOC source and sink behavior in porous building materials-analytical model development and assessment Indoor Air 15 2005 183 196 10.1111/j.1600-0668.2005.00335.x
150. C.-S. Lee, F. Haghighat, and W. Ghaly Conjugate mass transfer modeling for VOC source and sink behavior of porous building materials: when to apply It? J Build Phys 30 2006 91 111 10.1177/1744259106067683
151. Ayoko GA. Volatile organic compounds in indoor environments.The handbook of environmental chemistry, vol. 4, (Part F), Berlin Heidelberg: Springer-Verlag, 2004. p. 1-35
152. Magee RJ, Bodalal A, Biesenthal TA, Lusztyk E, Brouzes M, Shaw CY. Prediction of VOC concentration profiles in a newly constructed house using samll chamber data and an IAQ simulation program. In: Proceedings of the 9th international conference on IAQ and climate; 2002. p. 298-303
153. Berrios IT, Zhang J, Guo B, Smith J, Zhang Z. Volatile organic compounds (VOCS) emissions from sources in a partitioned office environment and their impact on IAQ. In: Proceedings of the 10th international conference on indoor air quality Climate, indoor air; 2005.
154. L. Molhave, G. Clausen, B. Berglund, J.D.E. Ceaurriz, A. Kettrup, and T. Lindvall Total volatile organic compounds (TVOC) in indoor air quality investigations Indoor Air 7 1997 225 240
155. I. Filella, and J. Peñuelas Daily, weekly, and seasonal time courses of VOC concentrations in a semi-urban area near Barcelona Atmos Environ 40 2006 7752 7769 10.1016/j.atmosenv.2006.08.002
156. C. Jia, S.A. Batterman, and G.E. Relyea Variability of indoor and outdoor VOC measurements: an analysis using variance components Environ Pollut 169 2012 152 169 10.1016/j.envpol.2011.09.024
157. F. Haghighat, and H. Huang Integrated IAQ model for prediction of VOC emissions from building material Build Environ 38 2003 1007 1017 10.1016/S0360-1323(03)00064-7
158. H. Huang, F. Haghighat, and P. Blondeau Volatile organic compound (VOC) adsorption on material: influence of gas phase concentration, relative humidity and VOC type Indoor Air 16 2006 236 247 10.1111/j.1600-0668.2005.00421.x
159. D.A. Missia, E. Demetriou, N. Michael, E.I. Tolis, and J.G. Bartzis Indoor exposure from building materials: a field study Atmos Environ 44 2010 4388 4395 10.1016/j.atmosenv.2010.07.049
160. J. Jalaludin, M.S. Nordiyana, and N.F. Suhaimi Exposure to indoor air pollutants (formaldehyde, VOCs, ultrafine particles) and respiratory health symptoms among office workers in old and new buildings in Universiti Putra Malaysia Int J Appl Nat Sci 3 2014 69 80
161. L.F. Cabeza, C. Castellón, M. Nogués, M. Medrano, R. Leppers, and O. Zubillaga Use of microencapsulated PCM in concrete walls for energy savings Energy Build 39 2007 113 119 10.1016/j.enbuild.2006.03.030
162. S.H. Lee, S.J. Yoon, Y.G. Kim, Y.C. Choi, J.H. Kim, and J.G. Lee Development of building materials by using micro-encapsulated phase change material Korean J Chem Eng 24 2007 332 335 10.1007/s11814-007-5054-8
163. G. Zhou, Y. Zhang, X. Wang, K. Lin, and W. Xiao An assessment of mixed type PCM-gypsum and shape-stabilized PCM plates in a building for passive solar heating Sol Energy 81 2007 1351 1360 10.1016/j.solener.2007.01.014
164. Safari V, Barreneche C, Castell A, Basatni A, Navarro L, Cabeza L, et al. Volatile organic emission from PCM building materials. In: Proceedings of the innostock 2012 - 12th international conference on energy storage; 2012
165. M. Hunger, A.G. Entrop, I. Mandilaras, H.J.H. Brouwers, and M. Founti The behavior of self-compacting concrete containing micro-encapsulated phase change materials Cem Concr Compos 31 2009 731 743 10.1016/j.cemconcomp.2009.08.002
166. S.H. Shin, and W.K. Jo Volatile organic compound concentrations, emission rates, and source apportionment in newly-built apartments at pre-occupancy stage Chemosphere 89 2012 569 578 10.1016/j.chemosphere.2012.05.054
167. Y. Cai, Q. Wei, F. Huang, S. Lin, F. Chen, and W. Gao Thermal stability, latent heat and flame retardant properties of the thermal energy storage phase change materials based on paraffin/high density polyethylene composites Renew Energy 34 2009 2117 2123 10.1016/j.renene.2009.01.017
168. James Clerk M. A treatise on electricity and magnetism. Oxford: Clarendon Press York; 1954.
169. X. Wang, and J. Niu Heat transfer of microencapsulated PCM slurry flow in a circular tube AIChE J 54 4 2008 1110 1120 10.1002/aic
170. M. Silakhori, M. Naghavi, H. Metselaar, T. Mahlia, H. Fauzi, and M. Mehrali Accelerated thermal cycling test of microencapsulated paraffin wax/polyaniline made by simple preparation method for solar thermal energy storage Materials 6 2013 1608 1620 10.3390/ma6051608
171. M.N. a Hawlader, M.S. Uddin, and H.J. Zhu Encapsulated phase change materials for thermal energy storage: Experiments and simulation Int J Energy Res 26 2002 159 171 10.1002/er.773
172. S.D. Sharma, D. Buddhi, and R.L. Sawhney Accelerated thermal cycle test of latent heat-storage materials Sol Energy 66 1999 483 490 10.1016/S0038-092X(99)00045-6
173. W. Fortuniak, S. Slomkowski, J. Chojnowski, J. Kurjata, A. Tracz, and U. Mizerska Synthesis of a paraffin phase change material microencapsulated in a siloxane polymer Colloid Polym Sci 291 2013 725 733 10.1007/s00396-012-2782-z
174. P.W. Griffiths, and P.C. Eames Performance of chilled ceiling panels using phase change material slurries as the heat transport medium Appl Therm Eng 27 2007 1756 1760 10.1016/j.applthermaleng.2006.07.009
175. O. Pons, A. Aguado, A.I. Fernández, L.F. Cabeza, and J.M. Chimenos Review of the use of phase change materials (PCMs) in buildings with reinforced concrete structures Mater Constr. 64 2014 e031 10.3989/mc.2014.05613
176. C. Norvell, D.J. Sailor, and P. Dusicka The effect of microencapsulated phase-change material on the compressive strength of structural concrete J Green Build 8 2013 116 124 10.3992/jgb.8.3.116
177. T.-C. Ling, and C.-S. Poon Use of phase change materials for thermal energy storage in concrete: an overview Constr Build Mater 46 2013 55 62 10.1016/j.conbuildmat.2013.04.031
178. A.M. Thiele, G. Sant, and L. Pilon Diurnal thermal analysis of microencapsulated PCM-concrete composite walls Energy Convers Manag 93 2015 215 227 10.1016/j.enconman.2014.12.078
179. R. Cheng, M. Pomianowski, X. Wang, P. Heiselberg, and Y. Zhang A new method to determine thermophysical properties of PCM-concrete brick Appl Energy 112 2013 988 998 10.1016/j.apenergy.2013.01.046
180. P. Schossig, H.-M. Henning, S. Gschwander, and T. Haussmann Micro-encapsulated phase-change materials integrated into construction materials Sol Energy Mater Sol Cells 89 2005 297 306 10.1016/j.solmat.2005.01.017
181. A.M. Borreguero, M. Luz Sánchez, J.L. Valverde, M. Carmona, and J.F. Rodríguez Thermal testing and numerical simulation of gypsum wallboards incorporated with different PCMs content Appl Energy 88 2011 930 937 10.1016/j.apenergy.2010.08.014
182. C. Barreneche, A. de Gracia, S. Serrano, M. Elena Navarro, A.M. Borreguero, a Inés Fernández, and et al. Comparison of three different devices available in Spain to test thermal properties of building materials including phase change materials Appl Energy 109 2013 421 427 10.1016/j.apenergy.2013.02.061
183. A.M. Borreguero, I. Garrido, J.L. Valverde, J.F. Rodríguez, and M. Carmona Development of smart gypsum composites by incorporating thermoregulating microcapsules Energy Build 76 2014 631 639 10.1016/j.enbuild.2014.03.005
184. T. Toppi, and L. Mazzarella Gypsum based composite materials with micro-encapsulated PCM: experimental correlations for thermal properties estimation on the basis of the composition Energy Build 57 2013 227 236 10.1016/j.enbuild.2012.11.009
185. C. Castellón, A. Castell, M. Medrano, I. Martorell, and L.F. Cabeza Experimental study of PCM inclusion in different building envelopes J Sol Energy Eng 131 2009 410061 410066 10.1115/1.3197843
186. C. Castellón, M. Medrano, J. Roca, L.F. Cabeza, M.E. Navarro, A.I. Fernández, and et al. Effect of microencapsulated phase change material in sandwich panels Renew Energy 35 2010 2370 2374 10.1016/j.renene.2010.03.030
187. A.M. Borreguero, J.L. Valverde, T. Peijs, J.F. Rodríguez, and M. Carmona Characterization of rigid polyurethane foams containing microencapsulated Rubitherm® RT27 Part I. J Mater Sci 45 2010 4462 4469 10.1007/s10853-010-4529-x
188. A.M. Borreguero, J.F. Rodríguez, J.L. Valverde, R. Arevalo, T. Peijs, and M. Carmona Characterization of rigid polyurethane foams containing microencapsulated Rubitherm® RT27: catalyst effect Part II J Mater Sci 46 2010 347 356 10.1007/s10853-010-4824-6
189. A.M. Borreguero, J.F. Rodríguez, J.L. Valverde, T. Peijs, and M. Carmona Characterization of rigid polyurethane foams containing microencapsulted phase change materials: microcapsules type effect J Appl Polym Sci 128 2013 582 590 10.1002/app.38226
190. H. Shim, E.A. McCullough, and B.W. Jones Using phase change materials in clothing Text Res J 71 2001 495 502 10.1177/004051750107100605
191. B. Ying, Y. Kwok, Y. Li, Q. Zhu, and C. Yeung Assessing the performance of textiles incorporating phase change materials Polym Test 23 2004 541 549 10.1016/j.polymertesting.2003.11.002
192. Y. Shin, D.-I. Yoo, and K. Son Development of thermoregulating textile materials with microencapsulated phase change materials (PCM). II. Preparation and application of PCM microcapsules J Appl Polym Sci 96 2005 2005 2010 10.1002/app.21438
193. Y.C. Sun, and Z.H. Cheng Heat buffering property of phase change materials in textiles Key Eng. Mater. 474-476 2011 1024 1028 10.4028/www.scientific.net/KEM.474-476.1024
194. A.M. Borreguero, B. Talavera, J.F. Rodriguez, J.L. Valverde, J.L. Gonzalez, and M. Carmona Enhancing the thermal comfort of fabrics for the footwear industry Text Res J 83 2013 1754 1763 10.1177/0040517513481872