Reaction Casting of Ceramic/Metal and Ceramic/Intermetallic Composites

Handbook of Advanced Ceramics: Materials, Applications, Processing and Properties

Volumn 1-2, Issue , 2003, Pages 421-434

  Sandhage, Ken H ^a   Claussen, Nils ^b  

^a Ohio State University   (United States)

^b HAMBURG UNIVERSITY OF TECHNOLOGY   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

ALUMINA; CERAMIC MATERIALS; HOT PRESSING; MELTING; METALLIC MATRIX COMPOSITES; PREFORMING;

CERAMIC BEARING; COMMERCIAL APPLICATIONS; DENSE COMPOSITES; LABOR INTENSIVE; LIQUID COMPOSITIONS; METALLIC LIQUID; PROCESSING STEPS; REACTIVE CASTINGS;

CERAMIC MATRIX COMPOSITES;

EID: 84943395245     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1016/B978-012654640-8/50010-9     Document Type: Chapter

References (54)

1. 3 composites with interpenetrating networks. Scripta Met. Mater. 1995, 33:843-848.
2. Daehn G.S., Starck B., Xu L., Elfishawy K.F., Ringnalda J., Fraser H.L. Elastic and plastic behavior of a co-continuous alumina/aluminum composite. Acta Mater. 1996, 44:249-261.
3. 3-Al(Si)-Si composites formed by in situ reaction of Al with aluminosilicate ceramics. Met. Mater. Trans. A 1996, 27:2122-2129.
4. Prielipp H., Knechtel M., Claussen N., Streiffer S.K., Mullejans H., Ruhle M., Rodel J. Strength and fracture toughness of aluminum/alumina composites with interpenetrating networks. Mater. Sci. Eng. A 1995, 197:19-30.
5. Breslin M.C., Ringnalda J., Xu L., Fuller M., Seeger J., Daehn G.S., Otani T., Fraser H.L. Processing, microstructure and properties of co-continuous alumina/aluminum composites. Mater. Sci. Eng. A 1995, 195:113-119.
6. Schon S., Prielipp H., Janssen R., Rodel J., Claussen N. Effect of microstructural scale on thermal shock resistance of aluminum-reinforced alumina. J. Am. Ceram. Soc. 1994, 77:701-704.
7. 3 composites with interpenetrating networks. Scripta Metall. Mater. 1994, 31:1085-1090.
8. Travitsky N.A., Claussen N. Microstructure and properties of metal infiltrated RBSN composites. J. Eur. Ceram. Soc. 1992, 9:61-65.
9. Aghajanian M.K., Rocazella M.A., Burke J.T., Keck S.D. The fabrication of metal matrix composites by a pressureless infiltration technique. J. Mater. Sci. 1991, 26:447-454.
10. Southam R.E., Reinicke-Murmann J., Kreuter P., Rogers G. Analysis of potential improvements in engine behavior due to ceramic valve train components. Paper No. 900452, SAE Technical Paper Series 1990, SAE International, Warrendale, PA.
11. Sheppard L.M. Automotive performance accelerates with ceramics. Am. Ceram. Soc. Bull. 1990, 69:1012-1021.
12. Breslin M.C., Xu L., Daehn G.S., Fraser H.L. Applications of co-continuous ceramic composite materials for automotive components. Paper No. 930184, SAE Technical Paper Series 1993, SAE International, Warrendale, PA.
13. Smith V., Deckman B., Brueck D. Advanced ceramics: where do we go from here. Am. Ceram. Soc. Bull. 1994, 73:49-52.
14. Asnani M., Southam R.E., Wills R.R. Contact fatigue damage in ceramic and metal valve tips. Paper No. 870419, SAE Technical Paper Series 1987, SAE International, Warrendale, PA.
15. Cornie J.A., Chiang Y-M., Uhlmann D.R., Mortensen A., Collins J.M. Processing of metal and ceramic matrix composites. Am. Ceram. Soc. Bull. 1986, 65:293-304.
16. Rice R.W. Processing, microstructures, performance, and economics of ceramic composites. Metal and Ceramic Matrix Composites: Proceedings, Modeling, and Mechanical Properties 1990, 159-166. The Minerals, Metals and Materials Society, Warrendale, PA. R.B. Bhagat, A.H. Clauer, P. Kumar, A.M. Ritter (Eds.).
17. Leipold M.H. Hot pressing. Treatise on Materials Science and Technology, Vol. 9, Ceramic Fabrication Processes 1976, 99-134. Academic Press, New York. F.F.Y. Wang (Ed.).
18. Mehrabian R., Riek R.G., Flemings M.C. Preparation and casting of metalparticulate non-metal composites. Metall Trans 1974, 5:1899-1905.
19. Gonzalez E.J., Trumble K.P. Spontaneous infiltration of alumina by copper-oxygen alloys. J. Am. Ceram. Soc. 1996, 79:114-120.
20. Toy C., Scott W.D. Ceramic-metal composite produced by melt infiltration. J. Am. Ceram. Soc. 1990, 73:97-101.
21. Claussen N. Processing of advanced ceramic composites: issues of producibility, affordability, reliability, and tailorability. Br. Ceram. Trans. 1999, 98:256-257.
22. 3 alloys produced by reactive infiltration. J. Eur. Ceram. Soc. 1999, 19:2449-2453.
23. Scheu C., Dehm G., Kaplan W.D., Wagner F., Claussen N. Microstructure and phase evolution of niobium-aluminide-alumina composites prepared by melt-infiltration. Phys. Stat. Sol. (a) 1998, 166:241-255.
24. Beyer P., Janssen R., Claussen N. Synthesis of aluminide-alumina composites by reactive squeeze casting. Adv. Eng. Mater. 2000, 2:734-747.
25. Fahrenholtz W.G., Ewsuk K.G., Loehman R.E., Tomsia A.P. Formation of structural intermetallics by reactive metal penetration of Ti and Ni oxides and aluminates. Met. Mater. Trans. A 1996, 27:2100-2104.
26. Barin I. Thermochemical Data of Pure Substances, Parts I and II 1989, 42. VCH Verlagsgesellschaft, Weinheim.
27. Barin I. Thermochemical Data of Pure Substances, Parts I and II 1989, 48. VCH Verlagsgesellschaft, Weinheim.
28. Barin I. Thermochemical Data of Pure Substances, Parts I and II 1989, 61. VCH Verlagsgesellschaft, Weinheim.
29. Barin I. Thermochemical Data of Pure Substances, Parts I and II 1989, 71. VCH Verlagsgesellschaft, Weinheim.
30. Barin I. Thermochemical Data of Pure Substances, Parts I and II 1989, 72. VCH Verlagsgesellschaft, Weinheim.
31. Barin I. Thermochemical Data of Pure Substances, Parts I and II 1989, 666. VCH Verlagsgesellschaft, Weinheim.
32. Barin I. Thermochemical Data of Pure Substances, Parts I and II 1989, 868. VCH Verlagsgesellschaft, Weinheim.
33. Barin I. Thermochemical Data of Pure Substances, Parts I and II 1989, 869. VCH Verlagsgesellschaft, Weinheim.
34. Barin I. Thermochemical Data of Pure Substances, Parts I and II 1989, 1067. VCH Verlagsgesellschaft, Weinheim.
35. Barin I. Thermochemical Data of Pure Substances, Parts I and II 1989, 1069. VCH Verlagsgesellschaft, Weinheim.
36. Barin I. Thermochemical Data of Pure Substances, Parts I and II 1989, 1359. VCH Verlagsgesellschaft, Weinheim.
37. Barin I. Thermochemical Data of Pure Substances, Parts I and II 1989, 1546. VCH Verlagsgesellschaft, Weinheim.
38. Barin I. Thermochemical Data of Pure Substances, Parts I and II 1989, 1642. VCH Verlagsgesellschaft, Weinheim.
39. Barin I. Thermochemical Data of Pure Substances, Parts I and II 1989, 1714. VCH Verlagsgesellschaft, Weinheim.
40. JCPDS Card Files. Card numbers 4-806, 4-835, 4-850, 5-678, 6-696, 9-97, 10-339, 21-1152, 21-1276, 25-1047, 33-664, 35-784, 35-789, 37-1449, 39-1491, 43-1042, 43-1484, 44-1188, 45-946. Joint Committee for Powder Diffraction Data, Swarthmore, PA (now International Center for Diffraction Data, Newtown Square, PA).
41. Brandes E.A. Smithells Metals Metals Reference Book 1983, 7. Ch. 14, Butterworth & Co, London. 6th edn.
42. Kumar P., Travitsky N.A., Beyer P., Sandhage K.H., Janssen R., Claussen N. Reactive casting of ceramic composites (R-3C). Scripta Mater. 2001, 44:751-757.
43. Kumar P., Sandhage K.H. The displacive compensation of porosity (DCP) method for fabricating dense, shaped, high-ceramic-bearing bodies at modest temperatures. J. Mater. Sci. 1999, 34:5757-5769.
44. Kumar P., Dregia S.A., Sandhage K.H. Epitaxial growth of magnesia and spinel on sapphire during incongruent reduction in molten magnesium. J. Mater. Res. 1999, 14:3312-3318.
45. Rogers K.A., Kumar P., Citak R., Sandhage K.H. The fabrication of dense, shaped ceramic/metal composites at 1000°C by the displacive compensation of porosity method. J. Am. Ceram. Soc. 1999, 82:757-760.
46. Dickerson M.B., Snyder R.L., Sandhage K.H. Dense, near net-shaped, carbide/refractory metal composites at modest temperatures by the displactive compensation of porosity (DCP) method. J. Am. Ceram. Soc. 2002, 85:730-732.
47. Dickerson M.B., Snyder R.L., Sandhage K.H. Low-temperature fabrication of dense, near net-shaped tungsten/zirconium carbide composites with tailored phase contents by the PRIMA-DCP process. Ceram. Eng. Sci. Proc. 2001, 22:97-107.
48. Pearson W.B. A Handbook of Lattice Spacings and Strutures of Metals and Alloys 1958, 347-351. Pergamon Press, New York.
49. Kneller E., Khan Y., Gorres U. The alloy system copper-zirconium. Part I. Phase diagram and structural relations. Z. Metallkunde 1986, 77:43-48.
50. Subramanian P.R., Laughlin D.E. Cu-W (copper-tungsten). Phase Diagrams of Binary Tungsten Alloys 1991, 76-79. Indian Institute of Metals, Calcutta. S.V. Nagender Naidu, P. Rama Rao (Eds.).
51. Storms E.K. Thezirconium-zirconium carbide system. The Refractory Carbides 1967, 18-35. Academic Press, New York.
52. Touloukian Y.S., Kirby R.K., Taylor R.E., Desai P.D. Thermophysical Properties of Matter: Thermal Expansion of Metallic Elements and Alloys 1975, Vol. 12:354. Plenum Press, New York.
53. Touloukian Y.S., Kirby R.K., Taylor R.E., Lee T.Y.R. Thermophysical Properties of Matter: Thermal Expansion of NonMetallic Solids 1977, Vol. 13:926. Plenum Press, New York.
54. Song G.M., Zhou Y., Wang Y.J., Lei T.C. Elevated temperature strength of a 20 vol% ZrC/W composite. J. Mater. Sci. Lett. 1998, 17:1739-1741.