Selective laser sintering of aliphatic-polycarbonate/hydroxyapatite composite scaffolds for medical applications

International Journal of Advanced Manufacturing Technology

Volumn 81, Issue 1-4, 2015, Pages 15-25

  XiaoHui, Song ^a,b   Wei, Li ^b   PingHui, Song ^c   QingYong, Su ^a   QingSong, Wei ^b   YuSheng, Shi ^b   Kai, Liu ^b,d   WenGuang, Liu ^e  

^a GUILIN UNIVERSITY OF AEROSPACE TECHNOLOGY   (China)

^b HUAZHONG UNIVERSITY OF SCIENCE AND TECHNOLOGY   (China)

^c Nuclear Industry of Shaanxi 215 Hospital   (China)

^d WUHAN UNIVERSITY OF TECHNOLOGY   (China)

^e JINGDEZHEN CERAMIC INSTITUTE   (China)

Author keywords

Aliphatic polycarbonate; Nano hydroxyapatite; Porous scaffolds; Selective laser sintering

Indexed keywords

3D PRINTERS; BONE; MANUFACTURE; MECHANICAL PROPERTIES; MEDICAL APPLICATIONS; NANOCOMPOSITES; POLYCARBONATES; POROSITY; SCAFFOLDS (BIOLOGY); SINTERING; SURFACE ROUGHNESS;

ALIPHATIC POLYCARBONATE; COMPOSITE SCAFFOLDS; EFFECTS OF MATERIALS; MICROSTRUCTURES AND MECHANICAL PROPERTIES; NANO-HYDROXYAPATITE; POROUS SCAFFOLD; PROCESSING PARAMETERS; SELECTIVE LASER SINTERING;

LASER HEATING;

EID: 84942363695     PISSN: 02683768     EISSN: 14333015     Source Type: Journal    
DOI: 10.1007/s00170-015-7135-x     Document Type: Article

References (41)

1. Langer R, Tirrell DA (2004) Designing materials for biology and medicine. Nature 428(6982):487–492
2. Yu H, Matthew HW, Wooley PH, Yang SY (2008) Effect of porosity and pore size on microstructures and mechanical properties of poly-epsilon-caprolactone-hydroxyapatite composites. J Biomed Mater Res B Appl Biomater 86(2):541–547
3. Armillotta A, Pelzer R (2008) Modeling of porous structures for rapid prototyping of tissue engineering scaffolds. Int J Adv Manuf Technol 39:501–511
4. Salmoria GV, Fancello EA, Roesler CRM, Dabbas F (2012) Functional graded scaffold of HDPE/HA prepared by selective laser sintering: microstructure and mechanical properties. Int J Adv Manuf Technol 65(9–12):1529–1534
5. Shuai C, Yang B, Peng S, Li Z (2013) Development of composite porous scaffolds based on poly(lactide-co-glycolide)/nano-hydroxyapatite via selective laser sintering. Int J Adv Manuf Technol 69(1–4):51–57
6. Chua CK, Leong KF, Tan KH, Wiria FE, Cheah CM (2003) Development of a tissue engineering scaffold structure library for rapid prototyping. Int J Adv Manuf Technol 21(4):302–312
7. Santos DM, Leong KF, Chua CK (2001) Rapid prototyping applications in medicine. Int J Adv Manuf Technol 18(2):103–117
8. Yan CZ, Shi YS, Wei QS, Zhang S (2009) Investigation into the pressing parameter of selected laser sintering carbon fiber/nylon composite powder. China thirteenth special processing Symposium of China, pp 496–498
9. Salmoria GV, Ahrens CH, Klauss P, Paggi RA, Oliveira RG, Lago A (2007) Rapid manufacturing of PE with controlled pore gradients using SLS. Mater Res 10:214–221
10. Schmidt M, Pohle D, Rechtenwald T (2007) Selective laser sintering of PEEK. Int J Adv Manuf Technol 56(1):205–208
11. Wu L, Ding J (2005) Effects of porosity and pore size on in vitro degradation of three-dimensional porous poly(D, L-lactide-co-glycolide) scaffolds for tissue engineering. J Biomed Mater Res A 75(4):767–777
12. Shuai C, Mao Z, Lu H, Nie Y, Hu H, Peng S (2013) Fabrication of porous polyvinyl alcohol scaffold for bone tissue engineering via selective laser sintering. Biofabrication 5(1):873–886
13. Shuai C, Feng P, Cao C, Peng S (2013) Processing and characterization of laser sintered hydroxyapatite scaffold for tissue engineering. Biotechnol Bioproc Eng 18(3):520–527
14. Wiria FE, Chua CK, Leong KF, Quah ZY, Chandrasekaran M, Lee MW (2008) Improved biocomposite development of poly(vinyl alcohol) and hydroxyapatite for tissue engineering scaffold fabrication using selective laser sintering. J Mater Sci Mater Med 19(3):989–996
15. Zhang Y, Hao L, Savalani MM, Harris RA, Tanner KE (2008) Characterization and dynamic mechanical analysis of selective laser sintered hydroxyapatite-filled polymeric composites. J Biomed Mater Res A 86(3):607–616
16. Wang H, Li Y, Zuo Y, Li J, Ma S, Cheng L (2007) Biocompatibility and osteogenesis of biomimetic nano-hydroxyapatite/polyamide composite scaffolds for bone tissue engineering. Biomaterials 28(22):3338–3348
17. Laurea S (2009) Polycaprolactone/hydroxyapitite scaffolds for bone tissue engineering. Drexel University, Philadelphia
18. Eosoly S, Vrana NE, Lohfeld S, Hindie M, Looney L (2012) Interaction of cell culture with composition effects on the mechanical properties of polycaprolactone-hydroxyapatite scaffolds fabricated via selective laser sintering (SLS). Mat Sci Eng C-Mater 32(8):2250–2257
19. Mazzoli A (2013) Selective laser sintering in biomedical engineering. Med Biol Eng Comput 51:245–256
20. Ho HCH, Gibson I, Cheung WL (1999) Effects of energy density on morphology and properties of selective laser sintered polycarbonate. J Mater Process Technol 90:204–210
21. Ho HCH, Cheung WL, Gibson I (2003) Morphology and properties of selective laser sintered bisphenol a polycarbonate. Ind Emg Chem Res 42(9):1850–1862
22. Fan KM, Cheung WL, Gibson I (2005) Movement of powder bed material during the selective laser sintering of bisphenol-A polycarbonate. Rapid Prototyp J 11(4):188–198
23. Liao J, Zhang L, Zuo Y, Wang H, Li J, Zou Q, Li Y (2009) Development of nanohydroxyapatite/polycarbonate composite for bone repair. J Biomater Appl 24(1):31–45
24. Zheng YL, Li YL, Liu X, Liu ZY, Yang W, Li W, Yang MB (2008) Mechanical and thermal properties of polycarbonate/hydroxyapatite nanocomposites. J Polym Mater Sci Eng 24(4):62–65
25. Dong QX, Chen QJ, Yang W, Zheng YL, Liu X, Li YL, Yang MB (2008) Thermal properties and flame retardancy of polycarbonate/hydroxyapatite nanocomposite. J Appl Polym Sci 109(1):659–663
26. Feng J, Zhuo RX, Zhang XZ (2012) Construction of functional aliphatic polycarbonates for biomedical applications. Prog Polym Sci 37:211–236
27. Song X, Shi Y, Song P, Wei Q, Li W (2014) Effects of the processing parameters on porosity of selective laser sintered aliphatic polycarbonate. In: International Conference on Mechatronics, Robotics and Automation, Zhuhai, China. Trans Tech Publications Ltd, pp 1000–1004
28. Savalani MM, Hao L, Dickens PM, Zhang Y, Tanner KE, Harris RA (2012) The effects and interactions of fabrication parameters on the properties of selective laser sintered hydroxyapatite polyamide composite biomaterials. Rapid Prototyp J 18(1):16–27
29. Tan KH, Chua CK, Leong KF, Cheah CM, Cheang P, Abu Bakar MS, Cha SW (2003) Scaffold development using selective laser sintering of polyetheretherketone–hydroxyapatite biocomposite blends. Biomaterials 24:3115–3123
30. Harris RA, Tanner KE, Zhang Y, Hao L, Savalani MM (2007) Fabrication of porous bioactive structures using the selective laser sintering technique. J Eng Med 221(8):873–886
31. Lima DD, Lemperle SM, Chen PC, Holmes RE, Colwell CW (1998) Bone response to implant surface morphology. J Arthroplasty 13(8):928–934
32. Yuan HP, Kurashina K, de Bruijn JD, Li YB, de Groot K, Zhang XD (1999) A preliminary study on osteoinduction of two kinds of calcium phosphate ceramics. Biomaterials 20(19):1799–1806
33. Karageorgiou V, Kaplan D (2005) Porosity of 3D biomaterial scaffolds and osteogenesis. Biomaterials 26(27):5474–5491
34. Kruth JP, Levy G, Klocke F, Childs THC (2007) Consolidation phenomenon in laser and power bed-based layered manufacturing. CIRP Ann 56(2):730–759
35. Kuboki Y, Takita H, Kobayashi D, Tsuruga E, Inoue M, Murata M, Nagai N, Dohi Y, Ohgushi H (1998) BMP-induced osteogenesis on the surface of hydroxyapatite with geometrically feasible and nonfeasible structures: topology of osteogenesis. J Biomed Mater Res 39(2):190–199
36. Hildebrand T, Laib A, Muller R, Dequeker J, Ruegsegger P (1999) Direct three-dimensional morphometric analysis of human cancellous bone: microstructural data from spine, femur, iliac crest, and calcaneus. J Bone Miner Res Off J Am Soc Bone Miner Res 14(7):1167–1174
37. Itala AI, Ylanen HO, Ekholm C, Karlsson KH, Aro HT (2001) Pore diameter of more than 100 mm is not requisite for bone ingrowth in rabbits. J Biomed Mater Res 58(6):679–683
38. Hulbert SF, Young FA, Mathews RS, Klawitter JJ, Talbert CD, Stelling FH (1970) Potential of ceramic materials as permanently implantable skeletal prostheses. J Biomed Mater Res 4(3):433–456
39. Lin ASP, Barrows TH, Cartmell SH, Guldberg RE (2003) Microarchitectural and mechanical characterization of oriented porous polymer scaffolds. Biomaterials 24(3):481–489
40. Liu K, Shi Y, He W, Li C, Wei Q, Liu J (2012) Densification of alumina components via indirect selective laser sintering combined with isostatic pressing. Int J Adv Manuf Technol 67(9–12):2511–2519
41. Hon KKB, Gill TJ (2004) Experimental investigation into the selective laser sintering of silicon carbide polyamide composites. J Eng Manuf 218(10):1249–1256