Thermal and mechanical properties of polyamide 11 based composites reinforced with surface modified titanate nanotubes

Materials and Design

Volumn 83, Issue , 2015, Pages 459-467

  Mancic, Lidija ^a,b   Osman, Renata F M ^a   Costa, Antonio M L M ^a   d'Almeida, Jose R M ^a   Marinkovic, Bojan A ^a   Rizzo, Fernando C ^a  

^a PONTIFICAL CATHOLIC UNIVERSITY OF RIO DE JANEIRO   (Brazil)

^b INSTITUTE OF TECHNICAL SCIENCES   (Serbia)

Author keywords

Composite; CTAB; Polyamide 11; SDS; Surface modification; Titanate nanotubes

Indexed keywords

COMPOSITE MATERIALS; DISPERSIONS; ELASTIC MODULI; ELECTRON MICROSCOPY; ENERGY DISPERSIVE X RAY ANALYSIS; FOURIER TRANSFORM INFRARED SPECTROSCOPY; HIGH RESOLUTION TRANSMISSION ELECTRON MICROSCOPY; MECHANICAL PROPERTIES; NANOTUBES; REINFORCEMENT; SCANNING ELECTRON MICROSCOPY; SURFACE TREATMENT; THERMOGRAVIMETRIC ANALYSIS; TRANSMISSION ELECTRON MICROSCOPY; X RAY ANALYSIS; YARN;

CETYLTRIMETHYLAMMONIUM BROMIDE; CTAB; POLYAMIDE 11; SCANNING AND TRANSMISSION ELECTRON MICROSCOPY; SCANNING TRANSMISSION ELECTRON MICROSCOPY; SDS; THERMAL AND MECHANICAL PROPERTIES; TITANATE NANOTUBES;

TITANIUM COMPOUNDS;

EID: 84941280126     PISSN: 02641275     EISSN: 18734197     Source Type: Journal    
DOI: 10.1016/j.matdes.2015.06.059     Document Type: Article

References (31)

1. Jeon I.Y., Baek J.B. Nanocomposites derived from polymers and inorganic nanoparticles. Materials 2010, 3:3654-3674.
2. Hussain F., Hojjati M., Okamoto M., Gorga R.E. Polymer-matrix nanocomposites, processing, manufacturing, and application: an overview. J. Comp. Mater. 2006, 40:1511-1575.
3. Ahmadi S.J., Huang J.D., Li W. Synthetic routes, properties and future applications of polymer-layered silicate nanocomposites. J. Mater. Sci. 2004, 39:1919-1925.
4. Boussia A.C., Vouyiouka S.N., Papaspyrides C.D. Polyamide nanocomposites by in-situ polymerization. In-situ Synthesis of Polymer Nanocomposites 2011, 27-52. Wiley-VCH, Weinheim. V. Mittal (Ed.).
5. Stoclet G., Sclavons M., Devaux J. Relations between structure and property of polyamide 11 nanocomposites based on raw clays elaborated by water-assisted extrusion. Appl. Polym. Sci. 2013, 127:4809-4824.
6. Kango S., Kalia S., Celli A., Njuguna J., Habibi Y., Kumar R. Surface modification of inorganic nanoparticles for development of organic-inorganic nanocomposites - a review. Prog. Polym. Sci. 2013, 38:1232-1261.
7. Yu M., Zhang Q., Fu Q. Preparation and characterisation of polyamide 11/clay nanocomposites. Chin. J. Polym. Sci. 2004, 22:43-47.
8. Halim K.A.A., Farrell J.B., Kennedy J.E. Preparation and characterisation of polyamide 11/montmorillonite (MMT) nanocomposites for use in angioplasty balloon applications. Mater. Chem. Phys. 2013, 143:336-348.
9. Liu T., Lim K.P., Tjiu W.C., Pramoda K.P., Chen Z.K. Preparation and characterization of nylon 11/organoclay nanocomposites. Polymer 2003, 44:3529-3535.
10. Huang S., Wang M., Liu T., Zhang W.D., Tjiu W.C., He C., Lu X. Morphology, thermal, and rheological behaviour of nylon 11/multi-walled carbon nanotube nanocomposites prepared by melt compounding. Polym. Eng. Sci. 2009, 49:1063-1068.
11. Lao S.C., Wu C., Moon T.J., Koo J.H., Morgan A., Pilato L., Wissler G. Flame-retardant polyamide 11 and 12 nanocomposites: thermal and flammability properties. J. Compos. Mater. 2009, 43:1803-1808.
12. Hao A., Wong I., Wu H., Lisco B., Ong B., Sallean A., Butler S., Londa M., Koo J.K. Mechanical, thermal, and flame-retardant performance of polyamide 11-halloysite nanotube nanocomposites. J. Mater. Sci. 2015, 50:157-167.
13. Capsal J.F., Pousserot C., Dantras E., Dandurand J., Lacabanne C. Dynamic mechanical behaviour of polyamide 11/Barium titanate ferroelectric composites. Polymer 2010, 51:5207-5211.
14. Kasuga T., Hiramatsu M., Hoson A., Sekino T., Niihara K. Formation of titanium oxide nanotube. Langmuir 1998, 14:3160-3163.
15. Morgado E., de Abreu M.A.S., Oscar R.C., Pravia O.R.S., Marinkovic B.A., Jardim P.M., Rizzo F.C., Araújo A.S. A study on the structure and thermal stability of titanate nanotubes as a function of sodium content. Solid State Sci. 2006, 8:888-900.
16. Mancic L., Marinkovic B., Jardim P., Milosevic O., Rizzo F. Precursor particle size as the key parameter for isothermal tuning of morphology from nanofibers to nanotubes in the Na2-xHxTinO2n+1 system through hydrothermal alkali treatment of rutile mineral sand. Cryst. Growth Des. 2009, 9:2152-2158.
17. Kralova D., Slouf M., Klementova M., Kuzel R., Kelnar I. Preparation of gram quantities of high-quality titanate nanotubes and their composites with polyamide 6. Mater. Chem. Phys. 2010, 124:652-657.
18. Umek P., Huskic M., Skapin A.S., Florjancic U., Zupancic B., Emri I., Arcon D. Structural and mechanical properties of polystyrene nanocomposites with 1D titanate nanostructures prepared by an extrusion process. Polym. Comp. 2008, 30:1318-1325.
19. Byrne M.T., McCarthy J.E., Bent M., Blake R., Gunko Y.K., Horvath E., Konya Z., Kukovecz A., Kiricsi I., Coleman J.N. Chemical functionalisation of titaniana nanotubes and their utilisation for the fabrication of reinforced polystyrene composites. J. Mater. Chem. 2007, 17:2351-2358.
20. Pontón P.I., d'Almeida J.R.M., Marinkovic B.A., Savic S.M., Mancic L., Rey N.A., Morgado E., Rizzo F.C. The effects of the chemical composition of titanate nanotubes and solvent type on 3-aminopropyltriethoxysilane grafting efficiency. Appl. Surf. Sci. 2014, 301:315-322.
21. Li W., Zhang M., Zhang J., Han Y. Self-assembly of cetyltrimethylammonium bromide in ethanol-water mixtures. Front. Chem. Chin. 2006, 1:438-442.
22. Khan A.M., Shan S.S. Determination of critical micelle concentration (Cmc) of sodium dodecyl sulfate (SDS) and the effect of low concentration of pyrene on its Cmc using ORIGIN software. J. Chem. Soc. Pak. 2008, 30:186-191.
23. Razza M., Bachinger A., Zahn N., Kickelbick G. Interaction and UV stability of various organic capping agents on the surface of anatase nanoparticle. Materials 2014, 7:2890-2912.
24. Dobson K.D., Roddick-Lanzilotta A.D., McQuillan A.J. An in situ infrared spectroscopic investigation of adsorption of sodium dodecyl sulfate and of cetyltrimethylammonium bromide surfactants to TiO2, ZrO2, Al2O3 and Ta2O5 particle films from aqueous solutions. Vib. Spectrosc. 2000, 24:287-295.
25. Ramimoghadam D., Bin Hussein M.Z., Taufiq-Yap Y.H. The effect of sodium dodecyl sulfate (SDS) and cetyltrimethylammonium bromide (CTAB) on the properties of ZnO synthesized by hydrothermal method. Int. J. Mol. Sci. 2012, 13:13275-13293.
26. Jolly L., Tidu A., Heizmann J.J., Bolle B. Microstructure evolution in polyamide PA11 under small uniaxial extension. Polymer 2002, 43:6839-6851.
27. Huskic M., Holjevac Grguric T., Umek P., Brnardic I. Functionalization of sodium titanate nanoribbons with silanes and their use in the reinforcement of epoxy nanocomposites. Polym. Compos. 2013, 34:1382-1388.
28. Zhang Y., Wang B., Hu G. Isothermal crystallization kinetics and melting behavior of Polyamide 11/Silica nanocomposites prepared by in situ melt polymerization. J. Appl. Polym. Sci. 2012, 123:273-279.
29. Frübing P., Kremmer A., Gerhard-Multhaupt R., Spanoudaki A., Pissis P. Relaxation processes at the glass transition in polyamide 11: From rigidity to viscoelasticity. J. Chem. Phys. 2006, 125:214701.
30. Fornes T.D., Paul D.R. Structure and properties of nanocomposites based on Nylon-11 and -12 compared with those based on Nylon-6. Macromolecules 2004, 37:7698-7709.
31. Zhang G., Li Y., Yan D. Polymorphism in nylon-11/montmorillonite nanocomposite. J. Polym. Sci.: Part B: Polym. Phys. 2004, 42:253-259.