Online Real-Time Quality Monitoring in Additive Manufacturing Processes Using Heterogeneous Sensors

Journal of Manufacturing Science and Engineering, Transactions of the ASME

Volumn 137, Issue 6, 2015, Pages

  Rao, Prahalad K ^a   Liu, Jia ^b   Roberson, David ^b   Kong, Zhenyu ^b   Williams, Christopher ^c  

^a State University of New York at Binghamton   (United States)

^b State University   (United States)

^c VIRGINIA POLYTECHNIC INSTITUTE AND STATE UNIVERSITY   (United States)

Author keywords

Additive manufacturing (AM); Dirichlet process (DP) mixture model; evidence theory (ET); fused filament fabrication (FFF); process monitoring; sensor fusion

Indexed keywords

3D PRINTERS; BAYESIAN NETWORKS; DISCRIMINANT ANALYSIS; MANUFACTURE; MIXTURES; NEURAL NETWORKS; PROCESS MONITORING; SOCIAL NETWORKING (ONLINE); SUPPORT VECTOR MACHINES; THERMOCOUPLES;

ADDITIVE MANUFACTURING; EVIDENCE THEORIES; FUSED FILAMENT FABRICATION (FFF); MIXTURE MODEL; SENSOR FUSION;

TEMPERATURE SENSORS;

EID: 84941208014     PISSN: 10871357     EISSN: 15288935     Source Type: Journal    
DOI: 10.1115/1.4029823     Document Type: Article

References (56)

1. Gibson, I., Rosen, D. W., and Stucker, B., 2010, Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing, Springer, New York.
2. Bourell, D., Beaman, J., Leu, M., and Rosen, D., 2009, "A Brief History of Additive Manufacturing and the Roadmap for Additive Manufacturing: Looking Back and Looking Ahead," U.S.-Turkey Workshop on Rapid Technologies, pp. 5-11.
3. Kruth, J.-P., Leu, M., and Nakagawa, T., 1998, "Progress in Additive Manufacturing and Rapid Prototyping," CIRP Ann.-Manuf. Technol., 47(2), pp. 525-540.
4. Levy, G. N., Schindel, R., and Kruth, J.-P., 2003, "Rapid Manufacturing and Rapid Tooling With Layer Manufacturing (LM) Technologies, State of the Art and Future Perspectives," CIRP Ann.-Manuf. Technol., 52(2), pp. 589-609.
5. Turner, B. N., Strong, R., and Gold, S. A., 2014, "A Review of Melt Extrusion Additive Manufacturing Processes: I. Process Design and Modeling," Rapid Prototyping J., 20(3), pp. 192-204.
6. Beyer, C., 2014, "Strategic Implications of Current Trends in Additive Manufacturing," ASME J. Manuf. Sci. Eng., 136(6), p. 064701.
7. Khoshnevis, B., Hwang, D., Yao, K.-T., and Yeh, Z., 2006, "Mega-Scale Fabrication by Contour Crafting," Int. J. Ind. Syst. Eng., 1(3), pp. 301-320.
8. Khoshnevis, B., Bodiford, M. P., Burks, K. H., Ethridge, E., Tucker, D., Kim, W., Toutanji, H., and Fiske, M. R., 2014, "Lunar Contour Crafting-A Novel Technique for ISRU Based Habitat Development," American Institute of Aeronautics and Astronautics Conference, Reno, NV, pp. 1-13.
9. Cooper, K. P., 2002, "Layered Manufacturing: Challenges and Opportunities," Materials Research Society Symposia, Fall 2002 Meeting, Vol. 758, pp. 23-34.
10. Scott, J., Gupta, N., Weber, C. L., Newsome, S., Wohlers, T., and Caffrey, T., 2012, Additive Manufacturing: Status and Opportunities, Science and Technology Policy Institute, Washington, DC, pp. 1-29.
11. 2013, Roundtable Forum on Additive Manufacturing: Opportunities and Constraints, Royal Academy of Engineering, London, UK.
12. Huang, Y., Leu, M. C., Mazumder, J., and Donmez, A., 2015, "Additive Manufacturing: Current State, Future Potential, Gaps and Needs, and Recommendations," ASME J. Manuf. Sci. Eng., 137(1), p. 014001.
13. Tapia, G., and Elwany, A., 2014, "A Review on Process Monitoring and Control in Metal-Based Additive Manufacturing," ASME J. Manuf. Sci. Eng., 136(6), p. 060801.
14. Huang, Q., Nouri, H., Xu, K., Chen, Y., Sosina, S., and Dasgupta, T., 2014, "Statistical Predictive Modeling and Compensation of Geometric Deviations of Three-Dimensional Printed Products," ASME J. Manuf. Sci. Eng., 136(6), p. 061008.
15. Energetics Incorporated, 2013, Measurement Science Roadmap for Metal-Based Additive Manufacturing, National Institute of Standards and Technology, Gaithersburg, MD.
16. Mahesh, M., Wong, Y., Fuh, J., and Loh, H., 2004, "Benchmarking for Comparative Evaluation of RP Systems and Processes," Rapid Prototyping J., 10(2), pp. 123-135.
17. Peng, A. H., and Wang, Z. M., 2010, "Researches Into Influence of Process Parameters on FDM Parts Precision," Appl. Mech. Mater., 34, pp. 338-343.
18. Wang, T.-M., Xi, J.-T., and Jin, Y., 2007, "A Model Research for Prototype Warp Deformation in the FDM Process," Int. J. Adv. Manuf. Technol., 33(11-12), pp. 1087-1096.
19. Anitha, R., Arunachalam, S., and Radhakrishnan, P., 2001, "Critical Parameters Influencing the Quality of Prototypes in Fused Deposition Modelling," J. Mater. Process. Technol., 118(1-3), pp. 385-388.
20. Armillotta, A., 2006, "Assessment of Surface Quality on Textured FDM Prototypes," Rapid Prototyping J., 12(1), pp. 35-41.
21. Agarwala, M. K., Jamalabad, V. R., Langrana, N. A., Safari, A., Whalen, P. J., and Danforth, S. C., 1996, "Structural Quality of Parts Processed by Fused Deposition," Rapid Prototyping J., 2(4), pp. 4-19.
22. Pei, E., Campbell, R. I., and de Beer, D., 2011, "Entry-Level RP Machines: How Well Can They Cope With Geometric Complexity?," Assem. Autom., 31(2), pp. 153-160.
23. Tong, K., Joshi, S., and Lehtihet, E. A., 2008, "Error Compensation for Fused Deposition Modeling (FDM) Machine by Correcting Slice Files," Rapid Prototyping J., 14(1), pp. 4-14.
24. Qiu, D., and Langrana, N. A., 2002, "Void Eliminating Toolpath for Extrusion-Based Multi-Material Layered Manufacturing," Rapid Prototyping J., 8(1), pp. 38-45.
25. Lin, F., Sun, W., and Yan, Y., 2001, "Optimization With Minimum Process Error for Layered Manufacturing Fabrication," Rapid Prototyping J., 7(2), pp. 73-82.
26. Xu, F., Loh, H., and Wong, Y., 1999, "Considerations and Selection of Optimal Orientation for Different Rapid Prototyping Systems," Rapid Prototyping J., 5(2), pp. 54-60.
27. Hossain, M. S., Espalin, D., Ramos, J., Perez, M., and Wicker, R., 2014, "Improved Mechanical Properties of Fused Deposition Modeling-Manufactured Parts Through Build Parameter Modifications," ASME J. Manuf. Sci. Eng., 136(6), p. 061002.
28. Sabourin, E., Houser, S. A., and Bøhn, J. H., 1997, "Accurate Exterior, Fast Interior Layered Manufacturing," Rapid Prototyping J., 3(2), pp. 44-52.
29. Ziemian, C., and Crawn, P., III, 2001, "Computer Aided Decision Support for Fused Deposition Modeling," Rapid Prototyping J., 7(3), pp. 138-147.
30. Panhalkar, N., Paul, R., and Anand, S., 2014, "Increasing Part Accuracy in Additive Manufacturing Processes Using a k-d Tree Based Clustered Adaptive Layering," ASME J. Manuf. Sci. Eng., 136(6), p. 061017.
31. Bukkapatnam, S., and Clark, B., 2007, "Dynamic Modeling and Monitoring of Contour Crafting-An Extrusion-Based Layered Manufacturing Process," ASME J. Manuf. Sci. Eng., 129(1), pp. 135-142.
32. Fang, T., Bakhadyrov, I., Jafari, M. A., and Alpan, G., 1998, "Online Detection of Defects in Layered Manufacturing," International Conference on Robotics and Automation, IEEE, Leuven, May 16-20, pp. 254-259.
33. Fang, T., Jafari, M. A., Danforth, S. C., and Safari, A., 2003, "Signature Analysis and Defect Detection in Layered Manufacturing of Ceramic Sensors and Actuators," Mach. Vision Appl., 15(2), pp. 63-75.
34. Cheng, Y., and Jafari, M. A., 2008, "Vission-Based Online Process Control in Manufacturing Applications," IEEE Trans. Auto. Sci. Eng., 5, pp. 140-153.
35. Dempster, A. P., Laird, N. M., and Rubin, D. B., 1977, "Maximum Likelihood From Incomplete Data Via the EM Algorithm," J. R. Stat. Soc. Ser. B (Methodol.), 39(1) pp. 1-38.
36. Escobar, M. D., 1994, "Estimating Normal Means With a Dirichlet Process Prior," J. Am. Stat. Assoc., 89(425), pp. 268-277.
37. Weheba, G., and Sanchez-Marsa, A., 2006, "Using Response Surface Methodology to Optimize the Stereolithography Process," Rapid Prototyping J., 12(2), pp. 72-77.
38. Kruth, J.-P., Vandenbroucke, B., Vaerenbergh, V. J., and Mercelis, P., 2005, "Benchmarking of Different SLS/SLM Processes as Rapid Manufacturing Techniques," International Conference on Polymer and Moulds Innovation (PMI), Gent, Belgium, pp. 1-7.
39. Moylan, S., Slotwinski, J., Cooke, A., Jurrens, K., and Donmez, M. A., 2012, Proposal for a Standardized Test Artifact for Additive Manufacturing Machines and Processes, National Institute of Standards and Technology (NIST), Gaithersburg, MD.
40. Cooke, A., and Soons, J., 2010, "Variability in the Geometric Accuracy of Additively Manufactured Test Parts," 21st Annual International Solid Freeform Fabrication Symposium, Austin, TX, pp. 1-12.
41. Vasudevarao, B., Natarajan, D. P., Henderson, M., and Razdan, A., 2000, "Sensitivity of RP Surface Finish to Process Parameter Variation," Proceedings of the Solid Freeform Fabrication, pp. 251-258.
42. Schmidt, S. R., and Launsby, R. G., 1989, Understanding Industrial Designed Experiments, Air Academy Press, Colorado Springs, CO.
43. Shafer, G., 1976, A Mathematical Theory of Evidence, Princeton University Press, Princeton, NJ.
44. Ferguson, T. S., 1983, "Bayesian Density Estimation by Mixtures of Normal Distributions," Recent Adv. Stat., 24, pp. 287-302.
45. Rasmussen, C. E., 2000, "The Infinite Gaussian Mixture Model," Adv. Neural Inf. Process. Syst., 12(52), pp. 554-560.
46. Beyca, O. F., 2013, "Sensor-Based Real-Time Process Monitoring for Ultra-Precision Manufacturing Processes With Nonlinearity and Nonstationarity," Ph.D. dissertation, Oklahoma State University, Stillwater, OK.
47. Basir, O., and Yuan, X., 2007, "Engine Fault Diagnosis Based on Multi-Sensor Information Fusion Using Dempster-Shafer Evidence Theory," Inf. Fusion, 8(4), pp. 379-386.
48. Yang, B.-S., and Kim, K. J., 2006, "Application of Dempster-Shafer Theory in Fault Diagnosis of Induction Motors Using Vibration and Current Signals," Mech. Syst. Signal Process., 20(2), pp. 403-420.
49. Parikh, C. R., Pont, M. J., and Barrie Jones, N., 2001, "Application of Dempster-Shafer Theory in Condition Monitoring Applications: A Case Study," Pattern Recognit. Lett., 22(6-7), pp. 777-785.
50. McCulloch, W. S., and Pitts, W., 1943, "A Logical Calculus of the Ideas Immanent in Nervous Activity," Bull. Math. Biophys., 5(4), pp. 115-133.
51. Powers, D. M., 2011, "Evaluation: From Precision, Recall and F-Measure to ROC, Informedness,Markedness and Correlation," Technical Report No. SIE-07-001.
52. John, G. H., and Langley, P., 1995, "Estimating Continuous Distributions in Bayesian Classifiers," Proceedings of the Eleventh Conference on Uncertainty in Artificial Intelligence, Morgan Kaufmann Publishers, San Francisco, CA, pp. 338-345.
53. Lachenbruch, P. A., 1975, "Discriminant Analysis," "Encyclopedia of Statistical Sciences," John Wiley & Sons, Inc., New York.
54. Cortes, C., and Vapnik, V., 1995, "Support-Vector Networks," Mach. Learn., 20(3), pp. 273-297.
55. Specht, D. F., 1990, "Probabilistic Neural Networks," Neural Networks, 3(1), pp. 109-118.
56. Hagan, M. T., Demuth, H. B., and Beale, M., 1997, Neural Network Design, PWS Publishing, Boston, MA.