The world-wide failure exercise. Its origin, concept and content

Failure Criteria in Fibre-Reinforced-Polymer Composites

Volumn , Issue , 2004, Pages 2-28

  Hinton, M J ^a   Kaddour, A S ^a   Soden, P D ^b  

^a QINETIQ   (United Kingdom)

^b UNIVERSITY OF MANCHESTER   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

FORECASTING; PLASTIC LAMINATES; POLYMERS; REINFORCED PLASTICS;

DESIGN PRACTITIONERS; FAILURE PREDICTION METHOD; FAILURE RESPONSE; FAILURE THEORIES; FIBER REINFORCED PLASTIC(FRP); POLYMER COMPOSITE; POLYMERIC COMPOSITES; PREDICTION OF PERFORMANCE;

LAMINATED COMPOSITES;

EID: 84940872190     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1016/B978-008044475-8/50002-0     Document Type: Chapter

References (61)

1. Failure of polymeric composite structures: Mechanisms and Criteria for Prediction of Performance. A report complied by C E Neal-Sturgess 23-25 September 1991.
2. Soden PD, Hinton MJ Failure criteria for composite laminates: Comparison of failure theories with experimental results: A call for experimental data. Compos Sci Techno 1992, V45:87-88. see also.
3. Soden PD, Hinton MJ Failure criteria for composite laminates. Compos Sci Techno 1992, V45:283-284.
4. Greenwood JH German work on GRP design. Composites July 1977, 175-184.
5. Swanson SR, Christoforou AP Progressive failure in carbon/epoxy laminates under biaxial stress. J Eng Mat Tech, Trans ASME 1987, V109:12-16.
6. Owen MJ, Rice DI Biaxial strength behaviour of glass-reinforced polyester resins. ASTM STP 787 1982, 124-144. I.M. Daniel (Ed.).
7. Tang P A multiaxial failure criterion for composites. AMD/ASME 1988, V93:87-96. published by ASME, New York, USA.
8. Hinton MJ, Soden PD, Kaddour AS 'Failure Criteria In Fibre Reinforced Polymer Composites,' a special issue of Composites Science and Technology 1998, V58. No 7, published by Elsevier Science Ltd, Oxford, UK.
9. Hinton MJ, Soden PD, Kaddour AS 'Failure Criteria In Fibre Reinforced Polymer Composites: Comparison with experiments,' a special issue of Composites Science and Technology 2002, V62. No 11/12, published by Elsevier Science Ltd, Oxford, UK.
10. Hinton MJ, Kaddour AS, Soden PD Failure Criteria In Fibre Reinforced Polymer Composites: Additional Theories, Comparison and Recommendations 2004, V64. No 3-4, 2004, Published by Elsevier Science Ltd, Oxford, UK.
11. BS4994: Specification for design and construction of vessels and tanks in reinforced plastics 1987, BSI, London.
12. MIL-HNDBK-17 1996, Department of Defence, Washington D.C., 20025, USA.
13. Hashin Z Failure criteria for unidirectional fiber composites. J Appl Med 1980, V47:329-334.
14. Hashin Z Finite thermoelastic fracture criterion with application to laminate cracking analysis. J Mechanics and Physics of Solids 1996, V44(No 7):1129-1145.
15. Rotem A, Hashin Z Failure modes of angle ply laminates. J Comp Mat 1975, V9:191-206.
16. Bogetti TA, Hoppel CPR, Harik VM, Newill JF, Burns BP Predicting the nonlinear response and progressive failure of composite laminates. Compos Sci Techno 2004, V64:329-342. see also Chapter 3.13 in this book.
17. Bogetti TA, Hoppel CPR, Harik VM, Newill JF, Burns BP Predicting the nonlinear response and failure of composite laminates: correlation with experimental results. Compos Sci Techno 2004, V64:477-485. see also Chapter 5.12 in this book.
18. Gotsis PK, Chamis CC, Minnetyan L Prediction of composite laminate fracture: micromechanics and progressive fracture. Compos Sci Techno 1998, V58:1137-1150. see also Chapter 3. 1 in this book.
19. Gotsis PK, Chamis CC, Minnetyan L Application of progressive fracture analysis for predicting failure envelopes and stress-strain behaviours of composite laminates: A comparison with experimental results. Compos Sci Techno 2002, V62:1545-1560. see also Chapter 5.1 in this book.
20. Cuntze RG, Freund A The predictive capability of Failure Mode Concept-based strength criteria for multidirectional laminates. Compos Sci Techno 2004, V64:343-377. see also Chapter 3.14 in this book.
21. Cuntze RG The predictive capability of failure mode concept-based strength criteria for multidirectional laminates: Part B. Compos Sci Techno 2004, V64:487-516. see also Chapter 5.13 in this book.
22. Eckold GC Failure criteria for use in the design environment. Compos Sci Techno 1998, V58:1095-1106. see also Chapter 3.2. in this book.
23. Eckold GC Failure criteria for use in the design environment-Part B. Compos Sci Techno 2002, V62:1561-1570. see also Chapter 5.2 in this book.
24. Edge EC Stress based Grant-Sanders method for predicting failure of composite laminates. Compos Sci Techno 1998, V58:1043-1044. see also Chapter 3.3. in this book.
25. Edge EC Theory v. experiment comparison for stress based Grant-Sanders method. Compos Sci Techno 2002, V62:1571-1590. see also Chapter 5.3 in this book.
26. Hart-Smith LJ Predictions of the original and truncated maximum strain failure models for certain fibrous composite laminates. Compos Sci Techno 1998, V58:1151-1178. see also Chapter 3.5 in this book.
27. Hart-Smith LJ Predictions of a generalised maximum-shear-stress failure criterion for certain fibrous composite laminates. Compos Sci Techno 1998, V58:1179-1208. see also Chapter 3.6 in this book.
28. Hart-Smith LJ Expanding The Capabilities Of The Ten-Percent Rule For Predicting The Strength Of Fibre-Polymer Composites. Compos Sci Techno 2002, V62:1515-1544. see also Chapter 3.17 in this book.
29. Hart-Smith LJ Comparison between theories and test data concerning the strength of various fibre-polymer composites. Compos Sci Techno 2002, V62:1591-1618. see also Chapter 5.4 in this book.
30. Huang Zheng ming Correlation of the bridging model predictions of the biaxial failure strengths of fibrous laminates with experiments. Compos Sci Techno 2004, V64:529-548. see also Chapter 5.15 in this book.
31. Huang Zheng ming A bridging model prediction of the tensile strength of composite laminates subjected to biaxial loads. Compos Sci Techno 2004, V64:395-448. see also Chapter 3.16 in this book.
32. Mayes SJ, Hansen AC Composite Laminate Failure Analysis Using Multicontinuum Theory. Compos Sci Techno 2004, V64:379-394. see also Chapter 3.15 in this book.
33. Mayes SJ, Hansen AC A comparison of multicontinuum theory based failure simulation with experimental results. Compos Sci Techno 2004, V64:517-527. see also Chapter 5.14 in this book.
34. McCartney LN Predicting transverse crack formation in cross-ply laminate. Compos Sci Techno 1998, V58:1069-1082. see also Chapter 3.4 in this book.
35. LN McCartney Predicting Ply Crack Formation And Failure In Laminates. Compos Sci Techno 2002, V62:1619-1632. see also Chapter 5.5. in this book.
36. Puck A, Schürmann H Failure analysis of FRP laminates by means of physically based phenomenological models. Compos Sci Techno 1998, V58:1045-1068. see also Chapter 3.7 in this book.
37. Puck A, Schürmann H Failure analysis of FRP laminates by means of physically based phenomenological models-Part B. Compos Sci Techno 2002, V62:1163-1672. see also Chapter 5.6 in this book.
38. Rotem A Prediction of laminate failure with Rotem failure criterion. Compos Sci Techno 1998, V58:1083-1094. see also Chapter 3.8 in this book.
39. Rotem A The Rotem failure criterion theory and practice. Compos Sci Techno 2002, V62:1663-1672. see also Chapter 5.7 in this book.
40. Sun CT, Tao JX Prediction of failure envelopes and stress strain behaviours of composite laminates. Compos Sci Techno 1998, V58:1125-1136. see also Chapter 3.9 in this book.
41. Sun CT, Tao J, Kaddour AS Prediction of failure envelopes and stress-strain behaviour of composite laminates: Comparison with experimental results. Compos Sci Techno 2002, V62:1672-1682. see also Chapter 5.8 in this book.
42. Liu K-S, Tsai SW A progressive quadratic failure criterion of a laminate. Compos Sci Techno 1998, V58:1023-1032. see also Chapter 3.10 in this book.
43. Kuraishi A, Tsai SW, Liu K A progressive quadratic failure criterion, Part B. Compos Sci Techno 2002, V62:1682-1696. see also Chapter 5.9 in this book.
44. Wolfe WE, Butalia TS A strain energy based failure criterion for nonlinear analysis of composite laminates subjected to biaxial loading. Compos Sci Techno 1998, V58:1107-1124. see also Chapter 3.11 in this book.
45. Butalia TS, Wolfe WE Strain energy based non-linear failure criterion: comparison of numerical predictions and experimental observations for symmetric composite laminates. Compos Sci Techno 2002, V62:1695-1710. see also Chapter 5.10 in this book.
46. Zinoviev P, Grigoriev SV, Lebedeva OV, Tairova LR Strength of multilayered composites under plane stress state. Compos Sci Techno 1998, V58:1209-1224. see also Chapter 3.12 in this book.
47. Zinoviev P, Lebedeva Olga V, Tairova Ludmilla P Coupled analysis of experimental and theoretical results on the deformation and failure of laminated composites under a plane state of stress. Compos Sci Techno 2002, V62:11711-11724. see also Chapter 5.11 in this book.
48. Soni SR A new look at commonly used failure theories in composite laminates. 24th Int Conf Structures and Structures Dynamics and Materials May 1983, 171-179.
49. Mast PW, Michopoulos JG, Thomas RW, Badaliance R, Wolock I Characterisation of strain-induced damage in composites based on the dissipated energy density: Part I-Basic scheme and formulation. Int J of Theor. & Applied Fract. Mech. 1995, V22:71-96.
50. Mast PW, Michopoulos JG, Thomas RW, Badaliance R, Wolock I Characterisation of strain-induced damage in composites based on the dissipated energy density: Part II- Composite specimens, and naval structures. Int J of Theor. & Applied Fract. Mech. 1995, V22:97-114.
51. Mast PW, Michopoulos JG, Thomas RW, Badaliance R, Wolock I Characterisation of strain-induced damage in composites based on the dissipated energy density: Part III- General material constitutive relation. Int J of Theor. & Applied Fract. Mech 1995, V22:115-125.
52. Uemura M, Fakunaga H Probabilistic burst strength of filament wound cylinder under internal pressure. J Compos Mater 1981, V15:462-480.
53. Li S, Reid SR, Soden PD A continuum damage model for transverse matrix cracking in laminated fibre reinforce composites. Phil Trans Roy Soc Lond A 1998, V356:2379-2412.
54. Gosse J, Christensen S 'Strain Invariant Failure Criteria for Polymers in Composite Materials', Paper AIAA-2001-1184 2001, 45-55.
55. Soden PD, Hinton MJ, Kaddour AS Lamina properties and lay-up configurations and loading conditions of a range fibre reinforced composite laminates. Compos Sci Techno 1998, V58:1011-1022. see Chapter 2.1 in this book.
56. Soden PD, Hinton MJ, Kaddour AS Biaxial test results for strength and deformation of a range of E-glass and carbon fibre reinforced composite laminates: Failure exercise benchmark data. Compos Sci Techno 2002, V62:1489-1514. see Chapter 2.2 in this book.
57. Hinton MJ, Kaddour AS, Soden PD 'Failure criteria for FRP's-A world study', (C536-018) 15-16 Sept 1998, IMechE HQ, London.
58. Hinton MJ, Kaddour AS, Soden PD Prediction of world-wide failure theories: Part B: Some experimental comparisons 15-16 March 1999, IMechE HQ, London, UK.
59. o GRP laminates. presented at ICCM-12 July 1999.
60. Hinton MJ, Soden PD, Kaddour AS Predicting failure in fibre composites: Lessons learned from the World-Wide Failure Exercise. ICCM-13 June 2001.
61. Talreja R A continuum mechanics characterisation of damage in composite materials. Phil Trans Roy Soc Lond A 1985, V339:195-226.