Inhibitor selection for internal corrosion control of pipelines: Comparison of rates of general corrosion and pitting corrosion under gassy-oil pipeline conditions in the laboratory and in the field

NACE - International Corrosion Conference Series

Volumn 2000-March, Issue , 2000, Pages

  Papavinasam, S ^a   Revie, R W ^a   Attard, M ^a   Demoz, A ^b   Sun, H ^b   Donini, J C ^b   Michaelian, K ^b  

^a CANMET MATERIALS TECHNOLOGY LABORATORY   (Canada)

^b NATURAL RESOURCES CANADA   (Canada)

Author keywords

Field experiments; Flow; High temperature, high pressure; Inhibition; Pitting corrosion; Rotating cage; Rotating cylinder electrode; Rotating disk electrode, jet impingement; Wall shear stress

Indexed keywords

CORROSION INHIBITORS; CORROSION RATE; ELECTRODES; ENZYME INHIBITION; HIGH TEMPERATURE CORROSION; INTERNAL CORROSION; LABORATORIES; OIL FIELDS; PIPELINES; ROTATING DISKS; SHEAR FLOW; SHEAR STRESS;

FIELD EXPERIMENT; FLOW; HIGH PRESSURE; JET IMPINGEMENT; ROTATING CAGES; ROTATING CYLINDER ELECTRODES; WALL SHEAR STRESS;

PITTING;

EID: 84940507736     PISSN: 03614409     EISSN: None     Source Type: Book Series    
DOI: None     Document Type: Conference Paper

References (33)

1. S. Papavinasam, R. W. Revie, M. Attard, A. Demoz, H. Sun, J. C. Donini, and K. Michaelian, "Inhibitor Selection for Internal Corrosion Control of Pipelines: 1. Laboratory Methodologies, NACE CORROSION/99 Conference Paper #1 (1999).
2. K. D. Efird, E. J. Wright, J. A. Boros, and T. G. Hailey; "Correlation of Steel Corrosion in Pipe Flow with Jet Impingement and Rotating Cylinder Tests", Corrosion 49, 992(1993).
3. S. Nesic; "Comparison of the Rotating Cylinder and Pipe Flow Tests for Flow-Sensitive Carbon Dioxide Corrosion", Corrosion 51, 773(1995).
4. G. Schmitt, W. Bruckhoff, K. Faessler, and G. Blummel, "Flow Loop versus Rotating Probes - Correlations between Experimental Results and Service Applications", NACE CORROSION/90 Conference Paper Number 23(1990).
5. A. D. Mercer, "Test Methods for Corrosion Inhibitors - Report Prepared for the European Federation of Corrosion Working Party on Inhibitors", British Corrosion Journal, 20, 61(1985)
6. 2 Corrosion Inhibitors for Downhole and Pipeline Use" NACE CORROSION/94 Conference Paper Number 42(1994)
7. M. Stern, "A Method for Determining Corrosion Rates from Linear Polarization Data" Corrosion 14, 60(1958).
8. M. Stern and A. L. Geary, "Electrochemical Polarization-1. A theoretical Analysis of the Shape of Polarization Curves" J. Electrochenical Society 104, 56(1957).
9. "Wheel Test Method Used for Evaluation of Film Persistent Inhibitors for Oilfield Applications" Report Prepared by NACE Task Group T-1D-8 on Wheel Test Method Used for Evaluation of Film Persistent Inhibitors for Oilfield Application, Materials Performance, December, 45(1982).
10. S. Papavinasam and R. W. Revie, "High-Temperature, High-Pressure Rotating Electrode System", International Pipeline Conference Volume 1, ASME 341(1998).
11. S. Papavinasam and R. W. Revie", Synergistic Effect of Pressure and Flow on Corrosion Rates. Studies Using High-Temperature, High-Pressure Rotating Electrode System" NACE CORROSION/99 Conference Paper Number 30(1999)
12. A. Demoz, K. H. Michaelian, J. Donini, S. Papavinasam, R. W. Revie, "Inhibitor Selection for Internal Corrosion Control of Pipelines: Experience with Field Monitoring and Measurement" NACE Northern Areas Eastern Conference and Exhibition, October 24-27, 1999, Paper No. 2A.4, Ottawa, Ontario, Canada.
13. M. Attard, S. Papavinasam, R. W. Revie, A. Demoz, J. C. Donini, and K. Michaelin, "Inhibitor Selection for Internal Corrosion Control of Pipelines: Comparison of Pitting Corrosion Rates of Coupons and Pipe", NACE Northern Area Eastern Conference, Paper #2A.3, October 24-27, 1999, Ottawa, Ontario, Canada.
14. A. Demoz, K. H. Michaelian, J. C. Donini, S. Papavinasam and R. W. Revie, "An Instrumented Field Corrosion Test Loop", International Pipeline Conference Volume 1, ASME 521(1998).
15. 2 Systems, CORROSION/88, NACE, Houston, Paper #88.
16. G. Liu, D. A. Tree, and M. S. High, "Relationships between Rotating Disk Corrosion Measurements and Corrosion in Pipe Flow" "Corrosion 50, 584(1994).
17. C. G. Law and J. Newman, Corrosion of a Rotating Iron Disk in Laminar, Transition, and Fully Developed Turbulent Flow" J. Electrochemical Society 133, 37(1986).
18. V. G. Levich, Physicochemical Hydromechanics, Prentice Hall, Inc. (1962)
19. and Acta Physicochim, URSS, 17:257(1942);
20. Zh. Fiz. Khim., 18:335(1944).
21. D. R. Gabe, "The Rotating Cylinder Electrode (Review) ", J. Applied Electrochemistry, 4(1974) p. 91
22. D. C. Silverman, "Rotating Cylinder Electrode - Geometry Relationships for Prediction of Velocity-Sensitive Corrosion", Corrosion, 44, 42(1988).
23. D. C. Silverman, "Rotating Cylinder Electrode for Velocity Sensitivity Testing" Corrosion 40, 220(1984).
24. K. D. Efird, E. J. Wright, J. A. Boros, and T. G. Hailey, "Correlation of Steel Corrosion in Pipe Flow with Jet Impingement and Rotating Cylinder Tests" Corrosion 49(1993) p. 992.
25. J. L. Dawson and C. C. Shih, "Electrochemical Testing of Flow Induced Corrosion Using Jet Impingement Rigs", CORROSION/87, NACE International, Houston, Paper no. 453.
26. F. Giralt and D. Trass, "Mass Transfer from Crystalline Surfaces in a Turbulent Impinging Jet, Part 1: Transfer by Erosion", Journal of Fluid Mechanics, Vol. 53, 1975, P.505
27. and "Mass Transfer from Crystalline Surfaces in a Turbulent Impinging Jet, Part 2: Erosion and Diffusional Transfer", Journal of Fluid Mechanics, Vol. 54, 1976, P.148.
28. R. H. Hausler, E. W. Stegmann, C. J. Cruz, and D. Tjandroso, CORROSION/90, NACE, Houston, Paper #6.
29. G. Schmidt, W. Bruckhoff, K. Faessler, and G. Blummel, "Flow loop versus rotating - correlations between experimental results and service applications" CORROSION/90, NACE, Houston, Paper #23.
30. G. Schmidt and W. Bruckhoff, "Relevance of laboratory experiments for investigation and mitigation offlow induced corrosion in gas production " CORROSION/88, NACE, Houston, Paper #357.
31. S. Papavinasam and R. W. Revie, "Inhibitor Selection for Internal Corrosion Control of Pipelines", International Pipeline Conference Volume 1, ASME, New York, 225(1998).
32. M. Eisenberg, C. W. Tobias, and C. R. Wilke, "Ionic Mass Transfer and Concentration Polarization at Rotating Electrodes" J. Electrochemical Society 101, 306(1954).
33. "State-of-the-Art Report on Controlled-Flow Laboratory Corrosion Tests" Report Prepared by NACE Task Group T-5A-31 on Fluid Flow Enhanced Corrosion, Item No. 24187, NACE Publication 5A195, December 1995.