Selective laser melting of stainless-steel/nano-hydroxyapatite composites for medical applications: Microstructure, element distribution, crack and mechanical properties

Journal of Materials Processing Technology

Volumn 222, Issue , 2015, Pages 444-453

  Wei, Qingsong ^a,b   Li, Shuai ^a,b   Han, Changjun ^a,b   Li, Wei ^a,b   Cheng, Lingyu ^a,b   Hao, Liang ^a,b   Shi, Yusheng ^a,b  

^a HUAZHONG UNIVERSITY OF SCIENCE AND TECHNOLOGY   (China)

^b UNIVERSITY OF EXETER   (United Kingdom)

Author keywords

Crack; Load bearing bone implants; Metal ceramic composite; Nano hydroxyapatite (nHA); Selective laser melting; Stainless steel (SS)

Indexed keywords

3D PRINTERS; AGGLOMERATION; BEARINGS (MACHINE PARTS); BONE; CRACKS; HYDROXYAPATITE; LAKES; LASER APPLICATIONS; MECHANICAL PROPERTIES; MEDICAL APPLICATIONS; MELTING; NANOCOMPOSITES; SCAFFOLDS; SCANNING; SURFACE ANALYSIS; TENSILE STRENGTH;

BONE IMPLANT; CROSS-SECTION MORPHOLOGY; LAYER-BY-LAYER SYNTHESIS; METAL-CERAMIC COMPOSITES; NANO-HYDROXYAPATITE; NANOINDENTATION TESTS; OPTIMUM PROCESSING CONDITIONS; SELECTIVE LASER MELTING;

STAINLESS STEEL;

EID: 84939945152     PISSN: 09240136     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jmatprotec.2015.02.010     Document Type: Article

References (35)

1. M.S. Abdul Aziz, T. Furumoto, K. Kuriyama, S. Takago, S. Abe, A. Hosokawa, and T. Ueda Residual stress and deformation of consolidated structure obtained by layered manufacturing process J. Adv. Mech. Des. Syst. Manuf. 7 2 2013 244 256
2. F. Abe, K. Osakada, M. Shiomi, K. Uematsu, and M. Matsumoto The manufacturing of hard tools from metallic powders by selective laser melting J. Mater. Process. Technol. 111 2001 210 213
3. K.N. Amato, S.M. Gaytan, L.E. Murr, E. Martinez, P.W. Shindo, J. Hernandez, S. Collins, and F. Medina Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting Acta Mater. 60 2012 2229 2239
4. A. Barbas, A.S. Bonnet, P. Lipinski, R. Pesci, and G. Dubois Development and mechanical characterization of porous titanium bone substitutes J. Mech. Behav. Biomed. Mater. 9 2012 34 44
5. C. Casavola, S.L. Campanelli, and C. Pappalettere Preliminary invastigation on distribution of residual stress generated by the selective laser melting process J. Strain Anal. Eng. Des. 44 2009 93 104
6. M.H. Fathi, M. Salehi, A. Saatchi, V. Mortazavi, and S.B. Moosavi In vitro corrosion behavior of bioceramic, metallic, and bioceramic-metallic coated stainless steel dental implants Dent. Mater. 19 2003 188 198
7. M.H. Fathi, A. Hanifi, and V. Mortazavi Preparation and bioactivity evaluation of bone-like hydroxyapatite nanopowder J. Mater. Process. Technol. 202 2008 536 542
8. M. Gaumann, C. Bezencon, P. Canalis, and W. Kurz Single-crystal laser deposition of superalloys: processing-microstructure maps Acta Mater. 49 2001 1051 1062
9. M. Gaumann, C. Bezencon, P. Canalis, and W. Kurz Single-cyrstal laser deposition of superralloys: processing-microstructure maps Acta Mater. 49 2001 1051 1062
10. R. Gumruk, R.A.W. Mines, and S. Karadeniz Static mechanical behaviours of stainless steel micro-lattice structures under different loading conditions Mater. Sci. Eng., A 586 2013 392 406
11. A.V. Gusarov, M. Pavlov, and I. Smurov Residual stresses at laser surface remelting and additive manufacturing Physics Procedia 12 2011 248 254
12. K. Gutensohn, C. Beythien, and J. Bau In vitro analyses of diamond-like carbon coated stents: reduction of metal ion release, platelet activation, and thrombogenicity Thromb. Res. 99 6 2000 577 585
13. K. Hamada, M. Kon, T. Hanawa, K. Yokoyama, Y. Miyamoto, and K. Asaoka Hydrothermal modification of titanium surface in calcium solutions Biomaterials 23 2002 2265 2272
14. L. Hao, S. Dadbakhsh, O. Seaman, and M. Felstead Selective laser melting of a stainless steel and hydroxyapatite composite for load-bearing implant development J. Mater. Process. Technol. 209 2009 5793 5801
15. A. Hussein, L. Hao, C.Z. Yan, and R. Everson Finite element simulation of the temperature and stress fields in single layers built without-support in selective laser melting Mater. Des. 52 2013 638 647
16. S.M. Jafari, B. Bender, C. Coyle, J. Parvizi, P.F. Sharkey, and W.J. Hozack Do tantalum and titanium cups show similar results in revision hip arthroplasty? Clin. Orthop. Relat. Res. 468 2010 459 465
17. J.P. Kruth, J. Deckers, E. Yasa, and R. Wauthle Assessing and comparing influencing factors of residual stresses in selective laser melting using a novel analysis method Proc. Inst. Mech. Eng., A: J. Power Energy 226 6 2012 980 991
18. M. Kutz Standard Handbook of Biomedical Engineering and Design 2004 The McGraw-Hill Companies 13 14 Part 12
19. F.C. Liu, G.L. Yang, M.H. Song, J. Chen, and W.D. Huang Microstructure and residual stress of laser rapid formed Inconel 718 nickel-base superalloy Opt. Laser Technol. 43 2011 208 213
20. R.W. McCalden, J.A. McGeough, M.B. Barker, and C.M. Court-Brown Age-related changes in the tensile properties of cordical bone. The relative importance of changes in porosity, mineralization, and microstructure J. Bone Joint Surg. 75 1993 1193 1205
21. K. Mensah-Darkwa, R.K. Gupta, and D. Kumar Mechanical and corrosion properties of magnesium-hydroxyaptite (Mg-HA) composite thin films J. Mater. Sci. Technol. 29 9 2013 788 794
22. P. Mercelis, and J.P. Kruth Residual stresses in selective laser sintering and selective laser melting Rapid Prototyping J. 12 5 2006 254 265
23. A. Mertens, S. Reginster, H. Paydas, Q. Contrepois, T. Dormal, O. Lemaire, and J. Lecomte-Beckers Mechanical properties of alloy Ti-6Al-4V and of stainless steel 316L processed by selective laser melting: influence of out-of-equilibrium microstructures Powder Metall. 57 3 2014 184 189
24. X. Miao Observation of microcracks formed in HA-316L composites Mater. Lett. 57 2003 1848 1853
25. W.C. Oliver, and G.M. Pharr An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments J. Mater. Res. 7 06 1992 1564 1583
26. X.B. Pei, J. Wang, Q.B. Wan, L.J. Kang, M.L. Xiao, and H. Bao Functionally graded carbon nanotubes/hydroxyapatite composite coating by laser cladding Surf. Coat. Technol. 205 2011 4380 4387
27. C.S. Ramesh, C.K. Srinivas, and B.H. Channabasappa Abrasive wear behaviour of laser sintered iron-SiC composites Wear 267 2009 1777 1783
28. M. Salmi, J. Tuomi, K.S. Paloheimo, R. Bjorkstrand, M. Paloheimo, J. Salo, R. Kontio, K. Mesimaki, and A.A. Makitie Patient-specific reconstruction with 3D modeling and DMLS additive manufacturing Rapid Prototyping J. 18 3 2012 209 214
29. S. Santhanakrishnan, Y.H. Ho, and N.B. Dahotre Laser coating of hydroxyapatite on Mg for enhanced physiological corrosion resistance and biodegradability Mater. Technol. 27 4 2012 273 277
30. I.V. Shishkovsky, I.A. Yadroitsev, and I.Y. Smurov Selective laser sintering/melting of nitinol-hydroxyapatite composite for medical applications Powder Metall. Met. Ceram. 50 5-6 2011 275 283
31. W. Suchanek, and M. Yoshimura Processing and properties of hydroxyapatite-based biomaterials for use as hard tissue replacement implants J. Mater. Res. 13 01 1998 94 117
32. S.F. Wen, S. Li, Q.S. Wei, C.Z. Yan, S. Zhang, and Y.S. Shi Effect of molten pool boundaries on the mechanical properties of selective laser melting parts J. Mater. Process. Technol. 214 11 2014 2660 2667
33. 3 ceramic components by selective laser melting Rapid Prototyping J. 19 1 2013 51 57
34. S. Yang, W.H. Li, and H.C. Man Laser cladding of HA/Ti composite coating on NiTi alloy Surf. Eng. 29 6 2013 409 413
35. M.Y. Zhang, C. Ye, U.J. Erasquin, T. Huynh, C.Z. Cai, and G.J. Cheng Laser engineered multilayer coating of biphasic calcium phosphate/titanium nanocomposite on metal substrates ACS Appl. Mater. Interfaces 3 2011 339 350