-
3
-
-
0038557201
-
Statistical and microscopic investigation of disc segment wear related to sawing Ankara andesites
-
A.S. Eyuboglu, Y. Ozcelik, S. Kulaksiz, and I.C. Engin Statistical and microscopic investigation of disc segment wear related to sawing Ankara andesites Int. J. Rock Mech. Min. Sci. 40 2003 405 414
-
(2003)
Int. J. Rock Mech. Min. Sci.
, vol.40
, pp. 405-414
-
-
Eyuboglu, A.S.1
Ozcelik, Y.2
Kulaksiz, S.3
Engin, I.C.4
-
4
-
-
10944258507
-
The influence of rock microhardness on the sawability of Pink Porriño granite (Spain)
-
N. Sánchez Delgado, A. Rodríguez-Rey, L.M. Suárez del Río, I. Díez Sarriá, L. Calleja, and V.G. Ruiz de Argandoña The influence of rock microhardness on the sawability of Pink Porriño granite (Spain) Int. J. Rock Mech. Min. Sci. 42 2005 161 166
-
(2005)
Int. J. Rock Mech. Min. Sci.
, vol.42
, pp. 161-166
-
-
Sánchez Delgado, N.1
Rodríguez-Rey, A.2
Suárez Del Río, L.M.3
Díez Sarriá, I.4
Calleja, L.5
Ruiz De Argandoña, V.G.6
-
5
-
-
84938875034
-
Minimization of kerf taper angle and kerf width using Taguchi's method in abrasive water jet machining of marble
-
V. Gupta, P.M. Pandey, M.P. Garg, R. Khanna, and N.K. Batra Minimization of kerf taper angle and kerf width using Taguchi's method in abrasive water jet machining of marble Procedia Mater. Sci. 6 2014 140 149
-
(2014)
Procedia Mater. Sci.
, vol.6
, pp. 140-149
-
-
Gupta, V.1
Pandey, P.M.2
Garg, M.P.3
Khanna, R.4
Batra, N.K.5
-
7
-
-
0027880851
-
2 laser radiation
-
Tel Aviv, Israel
-
2 laser radiation, in: Proceedings of SPIE, 8th Meeting on Optical Engineering in Israel Optoelectronics and Applications in Industry and Medicine, Tel Aviv, Israel, 1993, pp. 297-305.
-
(1993)
Proceedings of SPIE, 8th Meeting on Optical Engineering in Israel Optoelectronics and Applications in Industry and Medicine
, pp. 297-305
-
-
Gurvich, L.1
Yatsiv, S.2
Shachrai, A.3
-
8
-
-
0002746974
-
2 laser
-
San Jose, CA, United States
-
2 laser, in: Proceedings of SPIE, Novel Applications of Lasers and Pulsed Power, San Jose, CA, United States, 1995, pp. 34-39.
-
(1995)
Proceedings of SPIE, Novel Applications of Lasers and Pulsed Power
, pp. 34-39
-
-
Kumar, M.1
Biawas, A.K.2
Sriniwas, K.3
Nath, A.K.4
-
9
-
-
0001479887
-
-
M. Pires, A. Ferreira, M. Ribeiro, R. Teixeira, C. Rodrigues, in: Proceedings of SPIE, Laser Technologies in Industries, 1998, pp. 622-625.
-
(1998)
Proceedings of SPIE, Laser Technologies in Industries
, pp. 622-625
-
-
Pires, M.1
Ferreira, A.2
Ribeiro, M.3
Teixeira, R.4
Rodrigues, C.5
-
10
-
-
0036027609
-
2 laser cutting of slate
-
2 laser cutting of slate Opt. Lasers Eng. 37 2002 15 25
-
(2002)
Opt. Lasers Eng.
, vol.37
, pp. 15-25
-
-
Boutinguiza, M.1
Pou, J.2
Lusquiños, F.3
Quintero, F.4
Soto, R.5
Pérez-Amor, M.6
Watkins, K.7
Steen, W.M.8
-
13
-
-
13844314420
-
An energy based model for laser cutting natural stone
-
S. Turchetta, and L. Carrino An energy based model for laser cutting natural stone Int. J. Mach. Tools Manuf. 45 2005 761 767
-
(2005)
Int. J. Mach. Tools Manuf.
, vol.45
, pp. 761-767
-
-
Turchetta, S.1
Carrino, L.2
-
14
-
-
0015142998
-
Laser machining of southern pine
-
C.W. McMillin, and J.E. Harry Laser machining of southern pine Forest Prod. J. 21 10 1971 35 37
-
(1971)
Forest Prod. J.
, vol.21
, Issue.10
, pp. 35-37
-
-
McMillin, C.W.1
Harry, J.E.2
-
16
-
-
0026745449
-
Application of Taguchi methods in the optimization of the laser-cutting process
-
S.C. Tam, L.E. Lim, and K.Y. Quek Application of Taguchi methods in the optimization of the laser-cutting process J. Mater. Process. Technol. 29 1 1992 63 74
-
(1992)
J. Mater. Process. Technol.
, vol.29
, Issue.1
, pp. 63-74
-
-
Tam, S.C.1
Lim, L.E.2
Quek, K.Y.3
-
17
-
-
35448972043
-
Multi-objective optimisation of laser beam cutting process
-
A.K. Dubey, and V. Yadava Multi-objective optimisation of laser beam cutting process Opt. Laser Technol. 40 3 2008 562 570
-
(2008)
Opt. Laser Technol.
, vol.40
, Issue.3
, pp. 562-570
-
-
Dubey, A.K.1
Yadava, V.2
-
21
-
-
84877715118
-
Evalaution and optimization of laser cutting parametersfor plywood materials
-
H.A. Eltawahni, N.S. Rossini, M. Dassisti, K. Alrashed, T.A. Aldaham, K.Y. Benyounis, and A.G. Olabi Evalaution and optimization of laser cutting parametersfor plywood materials Opt. Lasers Eng. 51 9 2013 1029 1043
-
(2013)
Opt. Lasers Eng.
, vol.51
, Issue.9
, pp. 1029-1043
-
-
Eltawahni, H.A.1
Rossini, N.S.2
Dassisti, M.3
Alrashed, K.4
Aldaham, T.A.5
Benyounis, K.Y.6
Olabi, A.G.7
-
22
-
-
79551661546
-
Optimization of laser cutting processes using design of experiments
-
K. Huehnlein, K. Tschirpke, and R. Hellmann Optimization of laser cutting processes using design of experiments Phys. Procedia 5 2010 243 252 (Part B)
-
(2010)
Phys. Procedia
, vol.5
, pp. 243-252
-
-
Huehnlein, K.1
Tschirpke, K.2
Hellmann, R.3
-
23
-
-
0344671638
-
Parametric studies on pulsed Nd:YAG laser cutting of carbon fibre reinforced plastic composites
-
J. Mathew, G.L. Goswami, N. Ramakrishnan, and N.K. Naik Parametric studies on pulsed Nd:YAG laser cutting of carbon fibre reinforced plastic composites J. Mater. Process. Technol. 89-90 1999 198 203
-
(1999)
J. Mater. Process. Technol.
, vol.89-90
, pp. 198-203
-
-
Mathew, J.1
Goswami, G.L.2
Ramakrishnan, N.3
Naik, N.K.4
-
24
-
-
0026227337
-
The role of oxidation in laser cutting stainless and mild steel
-
A. Ivarson, J. Powell, and C. Magnusson The role of oxidation in laser cutting stainless and mild steel J. Laser Appl. 3 1991 41 45
-
(1991)
J. Laser Appl.
, vol.3
, pp. 41-45
-
-
Ivarson, A.1
Powell, J.2
Magnusson, C.3
-
26
-
-
2142810172
-
Quantitative evaluation of the quality of the cuts performed on mullite-alumina by Nd:YAG laser
-
F. Quintero, J. Pou, F. Lusquiños, M. Boutinguiza, R. Soto, and M. PérezAmor Quantitative evaluation of the quality of the cuts performed on mullite-alumina by Nd:YAG laser Opt. Lasers Eng. 42 2004 327 340
-
(2004)
Opt. Lasers Eng.
, vol.42
, pp. 327-340
-
-
Quintero, F.1
Pou, J.2
Lusquiños, F.3
Boutinguiza, M.4
Soto, R.5
Pérezamor, M.6
-
28
-
-
71549150912
-
Laser cutting of polymeric materials: an experimental investigation
-
I.A. Choudhury, and S. Shirley Laser cutting of polymeric materials: an experimental investigation Opt. Laser Technol. 42 2010 503 508
-
(2010)
Opt. Laser Technol.
, vol.42
, pp. 503-508
-
-
Choudhury, I.A.1
Shirley, S.2
-
31
-
-
33746488294
-
Optimization of an off-axis nozzle for assist gas injection in laser fusion cutting
-
F. Quintero, J. Pou, J.L. Fernández, A.F. Doval, F. Lusquiños, M. Boutinguiza, R. Soto, and M. Pérez-Amor Optimization of an off-axis nozzle for assist gas injection in laser fusion cutting Opt. Lasers Eng. 44 2006 1158 1171
-
(2006)
Opt. Lasers Eng.
, vol.44
, pp. 1158-1171
-
-
Quintero, F.1
Pou, J.2
Fernández, J.L.3
Doval, A.F.4
Lusquiños, F.5
Boutinguiza, M.6
Soto, R.7
Pérez-Amor, M.8
-
32
-
-
56749160826
-
Laser cutting of 2024-T3 aeronautic aluminum alloy
-
A. Riveiro, F. Quintero, F. Lusquiños, J. Pou, and M. Pérez-Amor Laser cutting of 2024-T3 aeronautic aluminum alloy J. Laser Appl. 20 2008 230 235
-
(2008)
J. Laser Appl.
, vol.20
, pp. 230-235
-
-
Riveiro, A.1
Quintero, F.2
Lusquiños, F.3
Pou, J.4
Pérez-Amor, M.5
-
33
-
-
84983127751
-
Construction of response surfaces for design optimization applications
-
G. Venter, R.T. Haftka, J.H. Starnes Jr., Construction of response surfaces for design optimization applications, in: Proceedings of the 6th AIAA/NASA/ISSMO Symposium on Multidisciplinary and Structural Optimization, 1996, pp. 548-564.
-
(1996)
Proceedings of the 6th AIAA/NASA/ISSMO Symposium on Multidisciplinary and Structural Optimization
, pp. 548-564
-
-
Venter, G.1
Haftka, R.T.2
Starnes, J.H.3
-
34
-
-
0033318217
-
Design of eutectic photoinitiator blends for UV/visible curable acrylated printing inks and coatings
-
J. Segurola, N.S. Allen, M. Edge, and A.M. Mahon Design of eutectic photoinitiator blends for UV/visible curable acrylated printing inks and coatings Progress Org. Coat. 37 1999 23 37
-
(1999)
Progress Org. Coat.
, vol.37
, pp. 23-37
-
-
Segurola, J.1
Allen, N.S.2
Edge, M.3
Mahon, A.M.4
-
35
-
-
26644443146
-
2 laser cutting: kerf width variation during cutting
-
2 laser cutting: kerf width variation during cutting Proc. Inst. Mech. Eng. Part B: J. Eng. Manuf. 219 8 2005 571 577
-
(2005)
Proc. Inst. Mech. Eng. Part B: J. Eng. Manuf.
, vol.219
, Issue.8
, pp. 571-577
-
-
Uslan, I.1
-
36
-
-
0030105672
-
An analytical model of metal cutting with a laser beam
-
A.F.H. Kaplan An analytical model of metal cutting with a laser beam J. Appl. Phys. 79 1996 2198 2208
-
(1996)
J. Appl. Phys.
, vol.79
, pp. 2198-2208
-
-
Kaplan, A.F.H.1
-
38
-
-
0031233616
-
The role of recoil pressure in energy balance during laser materials processing
-
V. Semak, and A. Matsunawa The role of recoil pressure in energy balance during laser materials processing J. Phys. D: Appl. Phys. 30 18 1997 2541
-
(1997)
J. Phys. D: Appl. Phys.
, vol.30
, Issue.18
, pp. 2541
-
-
Semak, V.1
Matsunawa, A.2
-
39
-
-
84904760718
-
Laser cladding of aluminium on AISI 304 stainless steel with high-power diode lasers
-
A. Riveiro, A. Mejías, F. Lusquiños, J. del Val, R. Comesaña, J. Pardo, and J. Pou Laser cladding of aluminium on AISI 304 stainless steel with high-power diode lasers Surf. Coat. Technol. 253 2014 214 220
-
(2014)
Surf. Coat. Technol.
, vol.253
, pp. 214-220
-
-
Riveiro, A.1
Mejías, A.2
Lusquiños, F.3
Del Val, J.4
Comesaña, R.5
Pardo, J.6
Pou, J.7
-
41
-
-
0001095259
-
Infrared reflectance spectra of igneous rocks, tuffs, and red sandstone from 0.5 to 22μ
-
J.W.A. Hovis, and W.R. Callahan Infrared reflectance spectra of igneous rocks, tuffs, and red sandstone from 0.5 to 22μ J. Opt. Soc. Am. 56 1966 639 643
-
(1966)
J. Opt. Soc. Am.
, vol.56
, pp. 639-643
-
-
Hovis, J.W.A.1
Callahan, W.R.2
-
42
-
-
0242662165
-
Surface treatment of granite by high power diode laser
-
J. Pou, C. Trillo, R. Soto, A.F. Doval, M. Boutinguiza, F. Lusquiños, F. Quintero, and M. Pérez-Amor Surface treatment of granite by high power diode laser J. Laser Appl. 15 2004 261 266
-
(2004)
J. Laser Appl.
, vol.15
, pp. 261-266
-
-
Pou, J.1
Trillo, C.2
Soto, R.3
Doval, A.F.4
Boutinguiza, M.5
Lusquiños, F.6
Quintero, F.7
Pérez-Amor, M.8
|