Metal forming: Mechanics and metallurgy

Metal Forming: Mechanics and Metallurgy

Volumn , Issue , 2011, Pages 1-331

  Hosford, William F ^a   Caddell, Robert M ^a  

^a UNIVERSITY OF MICHIGAN   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

METAL FORMING; METALS; SHEET METAL;

FORMING LIMIT DIAGRAMS; METAL PROPERTIES; SHEET FORMING;

STAMPING;

EID: 84938540808     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1017/CBO9780511976940     Document Type: Book

References (149)

1. R. M. Caddell, Deformation and Fracture of Solids, Prentice-Hall, 1980.
2. H. Ford, Advanced Mechanics of Materials, Wiley, 1963.
3. W. F. Hosford, Mechanical Behavior of Materials, Cambridge University Press, 2004.
4. W. Johnson and P. B. Mellor, Engineering Plasticity, Van Nostrand-Reinhold, 1973.
5. N. H. Polokowski and E. J. Ripling, Strength and Stucture of Engineering Materials, Prentice-Hall, 1966.
6. O. Mohr, Zivilingeneur (1882), p. 113.
7. P. Ludwig, Elemente der Technishe Mechanik, Springer, 1909.
8. F. A. McClintock and A. S. Argon, Mechanical Behavior of Materials, Addison Wesley, 1966.
9. W. F. Hosford, Mechanical Behavior of Materials, Cambridge University Press, 2005.
10. J. Bauschinger, Civilingenieur, 27 (1881), p. 289.
11. D. C. Drucker, Proc. 1st U.S. Nat. Congr. Appl. Mech. (1951), p. 487.
12. R. M. Caddell, Deformation and Fracture of Solids, Prentice-Hall, 1980.
13. C. R. Calladine, Engineering Plasticity, Pergamon Press, 1969.
14. P. Han, ed. Tension Testing, ASM International, 1992.
15. W. F. Hosford, Mechanical Behavior of Materials, Cambridge University Press, 2005.
16. W. Johnson and P. M. Mellor, Engineering Plasticity, Van Nostrand Reinhold, 1973.
17. E. G. Thomsen, C. T. Yang and S. Kobayashi, Mechanics of Plastic Deformation in Metal Processing, Macmillan, 1965.
18. J. H. Hollomon in Ferrous Metallurgical Design by John H. Hollomon and Leonard D. Jaffe, New York, J. Wiley & Sons, Inc.
19. P. W. Bridgman, Trans. ASM, 32 (1944) pp. 553–74.
20. M. Cook and E. C. Larke, J. Inst. Metals 71 (1945), pp. 371–90.
21. A. B. Watts and H. Ford, Proc. Inst. Mech. Eng. 169 (1955), pp. 114–49.
22. J. L. Duncan, The hydrostatic bulge test as laboratory experiment, Bulletin of Mechanical Engineering Education, v. 4, Pergamon Press, (1965).
23. R. F. Young, J. E. Bird and J. L. Duncan, “An Automated Hydraulic Bulge Tester, ” J. Applied Metalworking, 2, (1981).
24. D. S. Fields and W. A. Backofen, Proc. ASTM 57 (1957), pp. 1259–72.
25. W. A. Backofen, Deformation Processing, Addison-Wesley, 1972.
26. W. F. Hosford, Mechanical Behavior of Materials, Cambridge University Press, 2005.
27. A. Considére, Ann. Ponts et Chausses, v. 9 (1885), pp. 574–775.
28. W. A. Backofen, Deformation Processing, Addison-Wesley, 1972.
29. W. F. Hosford, Mechanical Behavior of Materials, 2nd ed. Cambridge University Press, 2010.
30. J. W. Edington, K. N. Melton, and C. P. Cutler, Progress in Materials Sci., 21 (1976).
31. O. D. Sherby and J. Wadsworth, Superplasticity: Recent Advances and Future Directions (New York: Oxford, 1990).
32. S. Tang, Mechanics of Superplasticity;Mathematics for Engineering and Science (Huntington, New York, 1979).
33. A. H. Cottrell, The Mechanical Properties of Matter (John Wiley, 1964).
34. M. F. Ashby and R. A. Verrall, Acta Met., 21 (1973).
35. S. P. Agrawal and E. D. Weisert in 7th North American Metalworking Research Conf., Soc. (Dearborn, MI: Man. Engrs., 1979).
36. C. Zener and J. H. Hollomon, J. Appl. Phys., 15 (1994).
37. S. Arrhenius, Z. Phys. Chem., 4 (1889).
38. F. Garofalo, TMS-AIME, 227 (1963).
39. J. J. Jonas, C. M. Sellers, and W. J. McG. Tegart, Met. Rev. (1969).
40. W. A. Backofen, Deformation Processing, Addison Wesley, 1972.
41. Metals Handbook: Forging and Forming, vol 4. 9th ed. ASM, 1988.
42. J. Wistreich, Metals Rev. (1958), pp. 97–142.
43. J. Hitchcock, “Roll Neck Bearings” App. I ASME (1935) pp. 286–96.
44. W. Johnson and P. B. Mellor, Plasticity for Mechanical Engineers, Van Nostrand, 1973.
45. G. T. van Rooyen and W. A. Backofen, J Mech. Phys. Solids, 7 (1959).
46. G. Sachs, Z. Angew. Math. Mech., v. 7, p. 235 (1927).
47. Z. Marciniak and A. Chodakowski, Stahl und Eisen v. 90, (1970).
48. W. R. D. Wilson, Mechanics of Sheet Metal Forming, Plenum Press, 1978, pp. 157–177.
49. F. Philip Bowden and David Taylor, Friction and Adhesion, Springer Netherlands, 2001.
50. W. Johnson and P. B. Mellor, Engineering Plasticity, Van Nostrand Reinhold, 1973.
51. C. R. Calladine, Engineering Plasticity, Pergamon Press, 1969.
52. B. Avitzur, Metal Forming: Processes and Analysis, McGraw-Hill, 1968.
53. L. F. Coffin and H. C. Rogers, Trans. ASM (1967).
54. H. Ford, Advanced Mechanics of Materials, Wiley, 1963.
55. H. Geringer, Proc 3rd. Int. Congr. Appl. Mech, 2, 1930.
56. A. P. Green, Phil. Mag. 42, (1951).
57. R. Hill. Plasticity, Oxford: Clarendon Press, 1950.
58. W. Johnson and P. B. Mellor, Engineering Plasticity, Van Nostrand Reinhold, 1973.
59. W. Johnson, R. Sowerby, and J. B. Haddow, Plane-Strain Slip Line Fields, American Elsevier, 1970.
60. W. Prager and P. G. Hodge Jr. Theory of Perfectly Plastic Solids, Wiley, 1951.
61. E. G. Thomsen, C. T. Yang, and S. Kobayashi, Mechanics of Plastic Deformation in Metal Processing, Macmillan, 1965.
62. W. A. Backofen, Deformation Processing, Addison-Wesley, 1972.
63. E. M. Meilnik, Metalworking Science and Engineering, McGraw-Hill, 1991.
64. R. M. Caddell and A. G. Atkins. J. Eng. Ind. Trans ASME, Series B (1968).
65. J. J. Burke, Doctoral Thesis, MIT (1968).
66. S. Miura, Y. Saeki and T. Matushita, Metals and Materials, 7 (1963).
67. P. S. Mathur and W. A. Backofen, Met Trans., 4 (1973).
68. M. L. Devenpeck and O. Richmond, J. Engr. Ind. Trans. ASME, 87 (1965).
69. L. F. Coffin Jr. and H. C. Rogers, Trans. ASME, 86 (1967).
70. B. Avitzur, Metal Forming: Processes and Analysis, McGraw-Hill 1969.
71. W. F. Hosford, Mechanical Behavior of Materials, 2nd ed., Cambridge University Press, 2010.
72. E. M. Meilnik, Metalworking Science and Engineering, McGraw-Hill, 1991.
73. J. O’Brien and W. Hosford, Met. and Mat. Trans., v. 33 (2002).
74. P. W. Bridgman, Studies in Large Plastic Flow and Fracture, Wiley, 1952.
75. M. G. Cockroft and D. J. Latham, J. Inst. Metals, v 96 (1968), pp. 33–39.
76. A. G. Atkins, Metal Sci. (Feb. 1981), pp. 81–3.
77. A. K. Ghosh, Met. Trans., 7A (1976), pp. 523–33.
78. F. A. McClintock, J. Appl. Mech., Trans. ASME, 35 (1968), pp. 363–71.
79. A. L. Gurson, J. Engr. Mater. Tech, v. 99 (1977), pp. 2–15.
80. H. A. Kuhn, Formability Topics – Metallic Materials, ASTM STP 647 (1978).
81. R. J. Kervick and R. K. Springborn, eds., Cold Forming and Bending of Tubes and Other Sections, ASTME, 1966.
82. Z. Marciniak, J. L. Duncan, and S. J. Hu, Mechanics of Sheet Metal Forming, Butterworth-Heinemann, 2002.
83. J. L. Duncan and J. E. Bird, Sheet Metal Industries (Sept. 1978).
84. W. W. Wood, Final Report on Sheet Metal Forming Technology, v. 2, SD-TDR-63-7-871 (July 1963).
85. R. Hill, Mathematical Theory of Plasticity, Oxford University Press, 1950.
86. W. F. Hosford, Mechanics of Single Crystals and Textured Polycrystals, Oxford University Press, 1992.
87. W. F. Hosford, Mechanical Behavior of Materials, 2nd ed. Cambridge University Press, 2010.
88. R. Hill, Proc. Roy. Soc. London 193A p. 281.
89. R. Hill, Mathematical Theory of Plasticity, Chapt XXXII, Oxford U. Press.
90. W. F. Hosford and W. A. Backofen in Fundamentals of Deformation Processing, Syracuse U. Press 1964, p. 259.
91. W. F. Hosford, “On Yield Loci of Anisotropic CubicMetals, ” 7th North American Metalworking Res. Conf. SME, Dearborn MI (1979)
92. R. Logan and W. F. Hosford, Int. J. Mech. Sci., 22 (1980).
93. R. Hill, Math. Proc. Camb. Soc. v. 75 (1979).
94. F. Barlat and J. Lian, Int. J. Mech. Sci., v. 5 (1989).
95. F. Barlat, D. J. Lege and J. C. Brem, Int. J. Plasticity, v. 7 (1991).
96. G. I. Taylor, J. Inst. Met. v. 62 (1938).
97. J. F. W. Bishop and R. Hill, Phil. Mag. v. 42.
98. Roger, Pierce, Sheet Metal Forming, Adam Hilger, 1991.
99. Edward, M. Meilnik, Metalworking Science and Engineering, McGraw Hill, 1991.
100. Z. Marciniak, J. L. Duncan and S. J. Hu, Mechanics of Sheet Metal Forming, Butterworth Heinemann, 2002.
101. R. Whiteley, Trans ASM v. 52 (1960).
102. W. F. Hosford in Formability: Analysis, Modeling and Experimentation, TMS AIME (1978).
103. W. G. Granzow, Paper No. F-1920. Fabricating Machinery Assn. Rockford IL, 1975.
104. W. G. Granzow, Sheet Metal Industries, v. 55 (1979).
105. Chung and Swift, Proc. Inst. Mech. Eng., 165 (1951), p. 199.
106. D. F. Eary and E. A. Reed, Techniques of Pressworking of Sheet Metal, 2nd ed. Prentice Hall, 1974.
107. G. E. Totten, K. Funatani, and L. Xie, Handbook of Metallurgical Process Design.
108. Alejandro, Graf and W. F. Hosford, Met. Trans., 21A (1990).
109. Alejandro, Graf and W. F. Hosford, Met. Trans., 24A (1993).
110. A. Graf and W. Hosford, Int. J. Mech. Sci., 36 (1994).
111. S. S. Hecker, A. K. Ghosh and H. L. Gegel, eds. Formability Analysis, Modeling and Experimentation, AIME 1978.
112. R. Hill, J. Mech. Phys. Solids, 1 (1952).
113. S. P. Keeler and W. A. Backofen, Trans. ASM, 56 (1963).
114. S. P. Keeler and W. G. Brazier, in Microalloying 75, Union Carbide, 1977.
115. S. L. Semiatin and J. J. Jonas, Formability and Workability of Metals, ASM, 1984.
116. R. H. Wagoner, K.S. Chan, and S. P. Keeler, eds. Forming Limit Diagrams: Concepts, Methods and Applications, TMS-AIME, 1989.
117. H. W. Swift, J. Mech. and Phys. of Solids, v 1 (1952).
118. Z. Marciniak, Archiwum Mechanikj Stosowanaj, 4 (1965).
119. Z. Marciniak and K. Kuczynski, Int. J. Mech. Sci., 9 (1967).
120. Z. Marciniak and K. Kuczynski, Int. J. Mech. Sci, 9 (1967).
121. S. P. Keeler and W. G. Brazier, in Micro Alloying 75 (Union Carbide, 1977).
122. P. E. Smith and D. Lee, Proc. of the Intern. Body Engineering Conf., SAE Detroit, SAE pub. 331 (1998).
123. Alejandro, Graf and W. F. Hosford, Met. Trans. v. 24A (1993).
124. T. B. Stoughton and J. W. Yoon, Int. J. Mech. Sci., 47 (2005).
125. John, H. Schey, Metal Deformation Processes: Friction & Lubrication, M. Decker, 1970.
126. Z. Marciniak, J. L. Duncanand, S. J. Hu, Mechanics of Sheet Metal Forming, Butterworth and Heinemann, 2002.
127. E. M. Meilnik, Metalworking Science and Technology, McGraw-Hill, 1991.
128. J. Havranek, in Sheet Metal Forming and Energy Conservation, Proc. 9th Bienn. Cong. Int. Deep Drawing Res. Group, ASM Ann Arbor, MI (1976).
129. D. E. Hardt and R. C. Fenn, Proc. ASM Symposium onMonitoring and Control of Manufacturing Processes (1990).
130. B. Cotrerell and J. K. Redel, Int. J. Fract., 13 (1977).
131. W. F. Hosford and A. G. Atkins, J. Material Shaping Technol., 8 (1990).
132. H. Singh, Fundamentals of Hydroforming, SME, 2003.
133. Z. Marciniak, J. L. Duncan, and S. J. Hu, Mechanics of Sheet Metal Forming, Butterworth-Heinemann, 2002.
134. Metals Handbook, 9th ed., 14, Forging and Forming, ASM.
135. Serope, Kalpakjian, Mechanical Processing of Materials, Van Nostrand, 1967.
136. Z. Marciniak, J. L. Duncan, and S. J. Hu, Mechanics of Sheet Metal Forming, Butterworth-Heinemann, 2002.
137. Metals Handbook, 9th ed., v. 14, Forging and Forming, ASM.
138. H. Singh, Fundamentals of Hydroforming, SME, 2003.
139. J. P. Duncan and J. L. Duncan, Folded Developables, Proc. R. Soc. Lond. A 383 (1982), p. 191.
140. E. M. Mielnik, Metalworking Science and Engineering, McGraw-Hill, 1991.
141. M. P. Miles, J. L. Siles, R. H. Wagoner, and K. Narasimhan, Met. Trans., 24A (1993).
142. S. S. Hecker, Met. Engr Q. v. 14 (1974).
143. J. L. Duncan, B. S. Shabel and J. G. Filho, SAE paper 780391, 1978.
144. Aluminum: Properties and Physical Metallurgy, ASM, 1984.
145. W. F. Hosford. Physical Metallurgy, Taylor and Francis, 2005.
146. The Making, Shaping and Treating of Steel, U.S. Steel Corp. 1971.
147. Report on Advanced High Strength Steel Workshop. October 2006. Web site http://mse.osu.edu/~wagoner/AHSS/AHSSReportFINAL.pdf.
148. J. O’Brien, R. Logan and W. Hosford, in Proceedings of the Sixth International Symposium on Plasticity and Its Current Applications. A. S. Kahn ed. 1997.
149. Q. Yang and A. K. Ghosh, “Deformation Behavior of Ultrafine-Grain AZ31-BMagnesium Alloy at Room Temperature, ” Acta Materialia, v. 54, 2006, pp. 5159–70.