Thermal transport and tribological properties of nanogreases for metal-mechanic applications

Wear

Volumn 332-333, Issue , 2015, Pages 1322-1326

  Pena Paras L ^a   Taha Tijerina, J ^a   Garcia A ^a   Maldonado, D ^a   Najera A ^a   Cantu P ^a   Ortiz, D ^a  

^a UNIVERSIDAD DE MONTERREY   (Mexico)

Author keywords

Antiwear additives; Extreme pressure additives; Lubricated wear including scuffing; Nanofluids; Thermal conductivity additives; Wear testing

Indexed keywords

CARBON; FILLERS; LUBRICANTS; MULTIWALLED CARBON NANOTUBES (MWCN); NANOFLUIDICS; NANOPARTICLES; PITTING; THERMAL CONDUCTIVITY OF LIQUIDS; TRIBOLOGY; WEAR OF MATERIALS; WEAR RESISTANCE; YARN;

ANTIWEAR ADDITIVE; EXTREME PRESSURE ADDITIVE; LUBRICATED WEARS; NANOFLUIDS; WEAR-TESTING;

THERMAL CONDUCTIVITY;

EID: 84937882333     PISSN: 00431648     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.wear.2015.01.062     Document Type: Article

References (41)

1. Wong K.V., León O. Applications of nanofluids: current and future. Adv. Mech. Eng. 2010, 1-11.
2. Leong K.Y., Mohammad H.A., Saidur R. A review on applications and challenges of nanofluids. Renew. Sust. Energy Rev. 2011, 15:1646-1668.
3. Lee P., Nam J.S., Li C., Lee S.W. An experimental study on micro-grinding process with nanofluid minimum quantity lubrication (MQL). Int. J. Precis. Eng. Manuf. 2012, 13:331-338.
4. Chang H., Li Z.Y., Kaob M.J., Huang K.D., Wu H.M. Tribological property of TiO2 nanolubricant on piston and cylinder surfaces. J. Alloys Compd. 2010, 495:481-484.
5. Zhi C., Xu Y., Bando Y., Goldberg D. Highly thermo-conductive fluid with boron nitride nanofillers. ACS Nano 2011, 5:6571-6657.
6. Botha S.S., Ndungu P., Bladergroen B.J. Physicochemical properties of oil-based nanofluids containing hybrid structures of silver nanoparticles supported on silica. Ind. Eng. Chem Res. 2011, 50:3071-3077.
7. Baby T.T., Sundara R. Synthesis and transport properties of metal oxide decorated graphene dispersed nanofluids. J. Phys. Chem. C 2011, 115:8527-8533.
8. Peña-Parás L., Taha-Tijerina J., García A., Maldonado D., González J.A., Molina D., Palacios E., Cantú P. Anti-wear and extreme pressure properties of nanofluids for industrial applications. Tribol. Trans. 2014, 57:1072-1076.
9. Hernández Battez A., González R., Felgueroso D., Fernández J.E., del Rocío Fernández M.a., García M.A., Peñuelas I. Wear pervention behaviour of nanoparticle suspension under extreme pressure conditions. Wear 2007, 263:1568-1574.
10. Hu Z.S., Dong J.X. Study on antiwear and reducing friction additive of nanometer titanium oxide. Wear 1998, 216:92-96.
11. Eswaraiah V., Sankaranarayanan V., Ramaprabhu S. Graphene based engine oil nanofluids for tribological applications. ACS Appl. Mater. 2011, 4221-4227.
12. Hernández Battez A., Viesca J.L., González R., Blanco D., Asedegbega E., Osorio A. Friction reduction properties of a CuO nanolubricant used as lubricant for a NiCrBSi coating. Wear 2010, 268:325-328.
13. Yu H., Xu Y., Shi P., Xu B., Wang X., Liu Q. Tribological properties and lubricating mechanisms of Cu nanoparticles in lubricant. Trans. Nonferr. Metal. Soc. 2008, 18:636-641.
14. Ji X., Chen Y., Zhao G., Wang X., Liu W. Tribological Properties of CaCO3 Nanoparticles as an Additive in Lithium Grease. Tribol. Lett. 2011, 71:113-119.
15. Wu Y.Y., Tsui W.C., Liu T.C. Experimental analysis of tribological properties of lubricating oils with nanoparticle additives. Wear 2007, 262:819-825.
16. Priest M., Stachowiak G., Neale M.J. Mechanism of metal nanoparticles used as oil additives. Nanolubricants 2008, 196-200. John Wiley & Sons Ltd., West Susex, England.
17. Hong H., Waynick A., Roy W. Heat transfer nanolubricant and nanogrease based on carbon nanotubes. ECS Trans. 2007, 2(12):133-138.
18. Aravind S.S.J., Baskar P., Baby T.T., Sabareesh R.K., Das S., Ramaprabhu S. Investigation of structural stability, dispersion, viscosity, and conductive heat transfer properties of functionalized carbon nanotube based nanofluids. J. Phys. Chem. C 2011, 115:16737-16744.
19. Krishnamurthy S., Bhattacharya P., Phelan P.E., Prasher R.S. Enhanced mass transport in nanofluids. Nano Lett. 2006, 6:419-423.
20. Shima P.D., Philip J., Raj B. Synthesis of aqueous and nonaqueous iron oxide nanofluids and study of temperature dependence on thermal conductivity and viscosity. J. Phys. Chem. C 2010, 114:18825-18833.
21. Yu W., Xie H., Bao D. Enhanced thermal conductivities of nanofluids containing graphene oxide nano-sheets. Nanotechnology 2010, 21:055705.
22. M. Mohan, C.B. Sobhan, S. Thomas, J. Taha-Tijerina, T.N. Narayanan, P.M. Ajayan, Heat transfer studies in thermally conducting and electrically insulating nano-oils using natural circulation loop, in: Proceedings of the ASME International Mechanical Engineering Congress and Exposition, IMECE, 2013-64285.
23. Keblinski P., Phillpot S.R., Choi S.U.S., Eastman J.A. Mechanisms of heat flow in suspensions of nano-sized particles. Int. J. Heat Mass Transf. 2002, 45:855-863.
24. Kedzierski M.A. Effect of Al2O3 nanolubricant on R134a pool boiling heat. Int. J. Refrig. 2011, 34:498-508.
25. Taha-Tijerina J., Narayanan T.N., Gao G., Rohde M., Tsentalovich D., Pasquali M., Ajayan P.M. Electrically insulating thermal nano-oils using 2D fillers. ACS Nano 2012, 6:1214-1220.
26. Taha-Tijerina J., Narayanan T.N., Tiwary C.S., Lozano K., Chipara M., Ajayan P.M. Nanodiamond-based thermal fluids. ACS Appl. Mater. Interfaces 2014, 6:4778-4785.
27. Sudeep P.M., Taha-Tijerina J., Ajayan P.M., Narayanan T.N., Anantharaman M.R. Nanofluids based on fluorinated graphene oxide for efficient thermal management. RSC Adv. 2014, 4:24887-24892.
28. Taha-Tijerina J., Peña-Paras L., Narayanan T.N., Garza L., Lapray C., Gonzalez J., Palacios E., Molina D., García A., Maldonado D., Ajayan P.M. Multifunctional nanofluids with 2D nanosheets for thermal and tribological management. Wear 2013, 302:1241-1248.
29. L. Peña-Paras, Dispersion of carbon nanotubes in vinyl ester polymer composites, doctoral thesis, Rice University, Houston, 2010.
30. Nield D.A., Kuznetsovb A.V. A note on the variation of nanofluid viscosity with temperature. Int. Commun. Heat Mass Transf. 2013, 41:17-18.
31. ASTM International D5183-05, Standard test method for determination of the coefficient of friction of lubricants using the four-ball wear test machine, 2011.
32. Szczerek M., Tuszynski W. A method for testing lubricants under conditions of scuffing. Part I. presentation of the method. Tribotest 2002, 8:273-284.
33. Gara L., Zou Q. Friction and wear characteristics of water-based ZnO and Al2O3 nanofluids. Tribol. Trans. 2012, 55:345-350.
34. Hu Z.S., Lai R., Lou F., Wang L.G., Chen Z.L., Chen G.X., Dong J.X. Preparation and tribological properties of nanometer magnesium borate as lubricating oil additive. Wear 2002, 252:370-374.
35. ASTM International C177-10, Standard test method for steady-state heat flux measurements and thermal transmission properties by mean of the guarded hot-plate apparatus, 2004.
36. ASTM International C518, Standar test method for steady-state thermal transmission properties by means of the heat flow meter apparatus, 2002.
37. Rorabacher D.B. Statistical treatment for rejection of deviant values: critical values of Dixon Q parameter and related subrange ratios at the 95 percent confidence level. Anal. Chem. 1991, 63(2):139-146.
38. Dean R.B., Dixon W.J. Simplified statistics for small numbers of observations. Anal. Chem. 1951, 23(4):636-638.
39. Ni B., Sinnot S.B. Tribological properties of carbon nanotube bundles predicted from atomistic simulations. Surf. Sci. 2001, 487:87-96.
40. Rudyak V. Viscosity of nanofluids-why it is not described by the classical theories. Adv. Nanopart. 2013, 2:266-279.
41. ASTM International D445, Standard method of test for viscosity of transparent and opaque liquids (kinematic and dynamic viscosities), 2006.