Preparation of spiral porous stainless steel hollow fiber membranes by a modified phase inversion-sintering technique

Journal of Membrane Science

Volumn 489, Issue , 2015, Pages 292-298

  Li, Haixia ^a   Song, Jian ^a   Tan, Xiaoyao ^a   Jin, Yonggang ^b   Liu, Shaomin ^c  

^a TIANJIN POLYTECHNIC UNIVERSITY   (China)

^b CSIRO   (Australia)

^c CURTIN UNIVERSITY   (Australia)

Author keywords

Hollow fiber; Phase inversion; Porous membrane; Sintering; Stainless steel

Indexed keywords

FIBERS; FIBROUS MEMBRANES; FRACTURE MECHANICS; HIGH TEMPERATURE APPLICATIONS; HIGH TEMPERATURE OPERATIONS; MEMBRANES; PORE SIZE; SINTERING; STEEL FIBERS; THERMAL EXPANSION;

316L STAINLESS STEEL POWDER; BIMODAL PORE SIZE DISTRIBUTION; EXPANSION AND CONTRACTION; HIGH MECHANICAL STRENGTH; HOLLOW FIBER; HOLLOW FIBER PRECURSORS; PHASE INVERSION; POROUS MEMBRANES;

STAINLESS STEEL;

1 METHYL 2 PYRROLIDINONE; NITROGEN; OXYGEN; POLYSULFONE; STAINLESS STEEL;

ARTICLE; ATMOSPHERE; CHEMICAL ANALYSIS; CHEMICAL STRUCTURE; GEOMETRY; HIGH TEMPERATURE; HOLLOW FIBER MEMBRANE; MECHANICS; MODIFIED PHASE INVERSION; PARTICLE SIZE; PRIORITY JOURNAL; ROOM TEMPERATURE; SINTERING TECHNIQUE; STRENGTH;

EID: 84936932734     PISSN: 03767388     EISSN: 18733123     Source Type: Journal    
DOI: 10.1016/j.memsci.2015.04.037     Document Type: Article

References (22)

1. Bhave R.R. Inorganic Membranes Synthesis, Characteristics and Applications 1991, Springer, Netherlands, New York.
2. Agoudjil N., Benmouhoub N., Larbot A. Synthesis and characterization of inorganic membranes and applications. Desalination 2005, 184:65-69.
3. Burggraaf A.J., Cot L. Fundamentals of Inorganic Membrane Science and Technology 1996, Elsevier Science B.V, The Netherlands.
4. Lin Y.S. Microporous and dense inorganic membranes: current status and prospective. Sep. Purif. Technol. 2001, 25:39-55.
5. Armor J.N. Applications of catalytic inorganic membrane reactors to refinery products. J. Membr. Sci. 1998, 147:217-233.
6. Lu G.Q., Diniz da Costa J.C., Duke M., Giessler S., Socolow R., Williams R.H., Kreutz T. Inorganic membranes for hydrogen production and purification: a critical review and perspective. J. Coll. Interface Sci. 2007, 314:589-603.
7. Luiten-Olieman M.W.J., Raaijmakers M.J.T., Winnubst L., Wessling M., Nijmeijer A., Benes N.E. Porous stainless steel hollow fibers with shrinkage-controlled small radial dimensions. Scripta Mater. 2011, 65:25-28.
8. Li K., Tan X., Liu Y. Single-step fabrication of ceramic hollow fibers for oxygen permeation. J. Membr. Sci. 2006, 272:1-5.
9. Tan X., Liu S., Li K. Preparation and characterization of inorganic hollow fiber membranes. J. Membr. Sci. 2001, 188:87-95.
10. Tan X., Liu Y., Li K. Preparation of La0.6Sr0.4Co0.2Fe0.8O3-δ hollow fiber membranes for oxygen production by a phase-inversion/sintering technique. Ind. Eng. Chem. Res. 2005, 44:61-66.
11. Meng B., Tan X., Meng X., Qiao S., Liu S. Porous and dense Ni hollow fibre membranes. J. Alloy. Compd. 2009, 470:461-464.
12. Yang N., Tan X., Ma Z. A phase inversion/sintering process to fabricate nickel/yttria-stabilized zirconia hollow fibers as the anode support for micro-tubular solid oxide fuel cells. J. Power Sour. 2008, 183:14-19.
13. Luiten-Olieman M.W.J., Winnubst L., Nijmeijer A., Wessling M., Benes N.E. Porous stainless steel hollow fiber membranes via dry-wet spinning. J. Membr. Sci. 2011, 370:124-130.
14. Michielsen B., Chen H., Jacobs M., Middelkoop V., Mullens S., Thijs I., Buekenhoudt A., Snijkers F. Preparation of porous stainless steel hollow fibers by robotic fiber deposition. J. Membr. Sci. 2013, 437:17-24.
15. Tan X., Wang Z., Meng B., Meng X., Li K. Pilot-scale production of oxygen from air using perovskite hollow fibre membranes. J. Membr. Sci. 2010, 352:189-196.
16. Peng S., Zhou D., Wei Y., Li Z., Wang H. A novel U-shaped anode-supported hollow fiber solid oxide fuel cell with considerable thermal cycling performance and stability. J. Membr. Sci. 2012, 417-418:80-86.
17. Wei Y., Liu H., Xue J., Li Z., Wang H. Preparation and oxygen permeation of U-shaped perovskite hollow-fiber membranes. AIChE J. 2011, 57:975-984.
18. Tan X., Liu Y., Li K. Mixed conducting ceramic hollow fiber membranes for air separation. AIChE J. 2005, 51:1991-2000.
19. Wang Z., Yang N., Meng B., Tan X., Li K. Preparation and oxygen permeation properties of highly asymmetric La0.6Sr0.4Co0.2Fe0.8O3-α perovskite hollow-fiber membranes. Ind. Eng. Chem. Res. 2008, 48:510-516.
20. Umm i K., Bashir S., Ali N., Akram M., Mahmood K., Ahmad R. Effect of ambient environment on excimer laser induced micro and nano-structuring of stainless steel. Appl. Surf. Sci. 2012, 261:101-109.
21. Kingsbury B.F.K., Wu Z., Li K. A morphological study of ceramic hollow fibre membranes: a perspective on multifunctional catalytic membrane reactors. Catal. Today 2010, 156:306-315.
22. Kingsbury B.F.K., Li K. A morphological study of ceramic hollow fibre membranes. J. Membr. Sci. 2009, 328:134-140.