Mechanical and Thermal Properties of Polyurethane Films from Peroxy-acid Wheat Straw Lignin

BioResources

Volumn 8, Issue 2, 2013, Pages 3833-3843

  Wang, Zhimin ^a   Yang, Xiaohui ^a   Zhou, Yonghong ^a   Liu, Chengguo ^a  

^a RESEARCH INSTITUTE OF FORESTRY   (China)

Author keywords

CIMV wheat straw lignin; Polyurethane films; Tensile property; Thermal conductivity; Thermostability

Indexed keywords

GLASS TRANSITION; POLYURETHANES; STRAW; TENSILE STRENGTH; THERMAL CONDUCTIVITY;

ELONGATION AT BREAK; INSULATING PROPERTIES; LIGNIN CONTENTS; MECHANICAL AND THERMAL PROPERTIES; ONSET DECOMPOSITION TEMPERATURES; OVERALL PROPERTIES; POLYURETHANE FILMS; WHEAT STRAWS;

LIGNIN;

POLYURETHANES; STRAW; STRETCH; TENSILE STRENGTH; THERMAL CONDUCTIVITY;

EID: 84934916899     PISSN: None     EISSN: 19302126     Source Type: Journal    
DOI: None     Document Type: Article

References (28)

1. Cetin, N. S., and Ozmen, N. (2002a). “Use of organosolv lignin in phenol-formaldehyde resins for particleboard production. I. Organosolv lignin modified resins,” International Journal of Adhesion and Adhesives 22(6), 477–480.
2. Cetin, N. S., and Ozmen, N. (2002b). “Use of organosolv lignin in phenol-formaldehyde resins for particleboard production. II. Particleboard production and properties,” International Journal of Adhesion and Adhesives 22(6), 481–486.
3. Cheng, X., and Jin, Y. (2008). “Application of organosolv lignin in lignin modified polyurethane,” Building Energy Efficiency 7, 40–44.
4. Cheng, S. N., Yuan, Z. S., Leitch, M., Anderson, M., and Xua, C. B. (2013). “Highly efficient de-polymerization of organosolv lignin using a catalytic hydrothermal process and production of phenolic resins/adhesives with the depolymerized lignin as a substitute for phenol at a high substitution ratio,” Industrial Crops and Products 44, 315–322.
5. Ciobanu, C., Ungureanu, M., Ignat, L., Ungureanu, D., and Popa, V. I. (2004). “Properties of lignin-polyurethane films prepared by casting method,” Industrial Crops and Products 20(2), 231–241.
6. Delmas, M., Lam, H. Q., Le Bigot, Y., and Avignon, G. (2003). “A new non-wood pulping process for high silicon content raw materials. Application to rice straw,” Appita Journal 56(2), 102–106.
7. Delmas, G. H., Benjelloun-Mlayah, B., Le Bigot, Y., and Delmas, M. (2011). “Functionality of wheat straw lignin extracted in organic acid media,” Journal of Applied Polymer Science 121(1), 491–501.
8. Ellis, W. D., Rowell, R. M., Levan, S. L., and Susott, R. A. (1987). “Thermal-degradation properties of wood reacted with diethylchlorophosphate or phenylphosphonic dichloride as potential flame retardants,” Wood and Fiber Science 19(4), 439–445.
9. Evtuguin, D. V., Andreolety, J. P., and Gandini, A. (1998). “Polyurethanes based on oxygen-organosolv lignin,” European Polymer Journal 34(8), 1163–1169.
10. Han, M. S., Choi, S. J., Vim, J. M., Kim, Y. H., Kim, W. N., Lee, H. S., and Sung, J. Y. (2009). “Effects of silicone surfactant on the cell size and thermal conductivity of rigid polyurethane foams by environmentally friendly blowing agents,” Macromolecular Research 17(1), 44–50.
11. Kham, L., Le Bigot, Y., Delmas, M., and Avignon, G. (2005). “Delignification of wheat straw using a mixture of carboxylic acids and peroxoacids,” Industrial Crops and Products 21(1), 9–15.
12. Kim, Y. H., Kang, M. J., Park, G. P., Park, S. D., Kim, S. B., and Kim, W. N. (2012). “Effects of liquid-type silane additives and organoclay on the morphology and thermal conductivity of rigid polyisocyanurate-polyurethane foams,” Journal of Applied Polymer Science 124(4), 3117–3123.
13. Lam, H. Q., Le Bigot, Y., Delmas, M., and Avignon, G. (2001). “A new procedure for the destructuring of vegetable matter at atmospheric pressure by a catalyst/solvent system of formic acid/acetic acid applied to the pulping of triticale straw,” Industrial Crops and Products 14(2), 139–144.
14. Lam, H. Q., Le Bigot, Y., Delmas, M., and Avignon, G. (2004). “Production of paper grade pulp from bagasse by a novel pulping process,” Appita Journal 57(1), 26–29.
15. Li, Y., and Ragauskas, A. J. (2012). “Ethanol organosolv lignin-based rigid polyurethane foam reinforced with cellulose nanowhiskers,” Rsc. Advances 2(8), 3347–3351.
16. Ligero, P., Villauerde, J. J., de Vega, A., and Bao, M. (2008). “Delignification of Eucalyptus globulus saplings in two organosolv systems (formic and acetic acid): Preliminary analysis of dissolved lignins,” Industrial Crops and Products 27(1), 110–117.
17. Liu, Q. X., Yang, S. H., Li, J. H., and Zhan, H. Y. (2002). “Characteristics of oxygen-alkali lignin and its application in synthesis of polyurethane,” in Emerging Technologies of Pulping and Papermaking, H. B. Liu, H. A. I. Zhan, and Y. I. Xue (eds.), South China University of Technology Press, Guangzhou.
18. Pan, X. J., and Saddler, J. N. (2013). “Effect of replacing polyol by organosolv and kraft lignin on the property and structure of rigid polyurethane foam,” Biotechnology for Biofuels 6(12).
19. Reimann, A., Mörck, R., Yoshida, H., Hatakeyama, H., and Kringstad, K. P. (1990). “Kraft lignin in polyurethanes. III. Effects of the molecular weight of PEG on the properties of polyurethanes from a kraft lignin-PEG-MDI system,” Journal of Applied Polymer Science 41(1–2), 39–50.
20. Thring, R. W., Vanderlaan, M. N., and Griffin, S. L. (1997). “Polyurethanes from Alcell lignin,” Biomass & Bioenergy 13(3), 125–132.
21. Vanderlaan, M. N., and Thring, R. W. (1998). “Polyurethanes from Alcell lignin fractions obtained by sequential solvent extraction,” Biomass & Bioenergy 14(5–6), 525–531.
22. Wang, P., Xie, Y.-M., Aori, G.-L., Zhan, H.-Y., and Gan, D.-N. (2004). “Synthesis of polyurethane from acetic acid lignin and its properties,” Linchan Huaxue Yu Gongye/Chemistry and Industry of Forest Products 24(2), 6.
23. Wang, H. H., Ni, Y. H., Jahan, M. S., Liu, Z. H., and Schafer, T. (2011a). “Stability of cross-linked acetic acid lignin-containing polyurethane,” Journal of Thermal Analysis and Calorimetry 103(1), 293–302.
24. Wang, H., Ni, Y., Jing, M., Liu, Z., and Jahan, M. S. (2011b). “Structure and property of self-crosslinked acetic acid lignin-containing polyurethane,” 16th International Symposium on Wood, Fiber and Pulping Chemistry, ISWFPC, 8–10 June 2011, Tianjin, China, 1338–1341.
25. Wang, C. H. E. N. H., Ni, Y. H., Jahan, M. S., Liu, Z. H., and Schafer, E. T. (2011c). “Stability of cross-linked acetic acid lignin-containing polyurethane,” Journal of Thermal Analysis and Calorimetry 103(1), 293–302.
26. Yan, D. X., Dai, K., Xiang, Z. D., Li, Z. M., Ji, X., and Zhang, W. Q. (2011). “Electrical conductivity and major mechanical and thermal properties of carbon nanotube-filled polyurethane foams,” Journal of Applied Polymer Science 120(5), 3014–3019.
27. Yoshida, H., Mörck, R., Kringstad, K. P., and Hatakeyama, H. (1987). “Kraft lignin in polyurethanes I. Mechanical properties of polyurethanes from a kraft lignin-polyether triol-polymeric MDI system,” Journal of Applied Polymer Science 34(3), 1187–1198.
28. Yoshida, H., Mörck, R., Kringstad, K. P., and Hatakeyama, H. (1990). “Kraft lignin in polyurethanes. II. Effects of the molecular weight of kraft lignin on the properties of polyurethanes from a kraft lignin-polyether triol-polymeric MDI system,” Journal of Applied Polymer Science 40(11–12), 1819–1832.