The biocompatibility of degradable magnesium interference screws: An experimental study with sheep

BioMed Research International

Volumn 2015, Issue , 2015, Pages

  Thormann, Ulrich ^a,b   Alt, Volker ^a,b   Heimann, Lydia ^c   Gasquere, Cyrille ^c   Heiss, Christian ^a,b   Szalay, Gabor ^b   Franke, Jörg ^d   Schnettler, Reinhard ^a,b   Lips, Katrin Susanne ^a  

^a JUSTUS LIEBIG UNIVERSITY   (Germany)

^b UNIVERSITY HOSPITAL GIESSEN   (Germany)

^c Aap Biomaterials GmbH   (Germany)

^d Elbe Kliniken   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

ALLOY; BIOMATERIAL; BISPHOSPHONIC ACID DERIVATIVE; CALCIUM PHOSPHATE; HYDROXYAPATITE; MAGNESIUM; NANOMATERIAL; POLYLACTIDE; SILICON DIOXIDE; TITANIUM;

ANIMAL EXPERIMENT; ANIMAL MODEL; ANIMAL TISSUE; ARTICLE; BIOCOMPATIBILITY; BIODEGRADABLE IMPLANT; BIODEGRADABLE INTERFERENCE SCREW; BONE METABOLISM; BONE TISSUE; CERAMICS; CONTROLLED STUDY; DRILL BIT; EXPERIMENTAL STUDY; FEMALE; KNEE; LIGAMENT SURGERY; NONHUMAN; ORTHOPEDIC IMPLANT; OXIDATION; PLASMA ELECTROLYTIC OXIDATION; SHEEP; WOUND CLOSURE; ANIMAL; BONE SCREW; DEVICE FAILURE ANALYSIS; FEMUR; MATERIALS TESTING; PATHOLOGY; PROSTHESIS DESIGN; SURGERY;

OVIS ARIES;

ABSORBABLE IMPLANTS; ANIMALS; BIOCOMPATIBLE MATERIALS; BONE SCREWS; EQUIPMENT FAILURE ANALYSIS; FEMALE; FEMUR; MAGNESIUM; MATERIALS TESTING; PROSTHESIS DESIGN; SHEEP;

EID: 84933055550     PISSN: 23146133     EISSN: 23146141     Source Type: Journal    
DOI: 10.1155/2015/943603     Document Type: Article

References (37)

1. F. Witte, T. Calliess, and H. Windhagen,"Biodegradable synthetic implant materials: clinical applications and immunological aspects," Orthopade, vol. 37, no. 2, pp. 125-130, 2008.
2. M. P. Staiger, A. M. Pietak, J. Huadmai, and G. Dias,"Magnesium and its alloys as orthopedic biomaterials: a review," Biomaterials, vol. 27, no. 9, pp. 1728-1734, 2006.
3. A. Pietak, P. Mahoney, G. J. Dias, and M. P. Staiger,"Bonelike matrix formation on magnesium and magnesium alloys," Journal ofMaterials Science: Materials inMedicine, vol. 19, no. 1, pp. 407-415, 2008.
4. A. Eliezer and F. Witte,"Corrosion behavior of magnesium alloys in biomedical environments," Advanced Materials Research, vol. 95, pp. 17-20, 2010.
5. F.Witte, N. Hort, C.Vogt et al.,"Degradable biomaterials based on magnesium corrosion," Current Opinion in Solid State and Materials Science, vol. 12, no. 5-6, pp. 63-72, 2008.
6. S. V. Dorozhkin,"Calcium orthophosphate coatings on magnesium and its biodegradable alloys," Acta Biomaterialia, vol. 10, no. 7, pp. 2919-2934, 2014.
7. K. Bobe, E. Willbold, I. Morgenthal et al.,"In vitro and in vivo evaluation of biodegradable, open-porous scaffolds made of sintered magnesiumW4 short fibres," Acta Biomaterialia, vol. 9, no. 10, pp. 8611-8623, 2013.
8. F. Witte, J. Fischer, J. Nellesen et al.,"In vivo corrosion and corrosion protection of magnesium alloy LAE442," Acta Biomaterialia, vol. 6, no. 5, pp. 1792-1799, 2010.
9. E. Willbold, K. Kalla, I. Bartsch et al.,"Biocompatibility of rapidly solidified magnesium alloy RS66 as a temporary biodegradablemetal," Acta Biomaterialia, vol. 9, no. 10, pp. 8509-8517, 2013.
10. N. Hort, Y. Huang, D. Fechner et al.,"Magnesium alloys as implant materials-principles of property design for Mg-RE alloys," Acta Biomaterialia, vol. 6, no. 5, pp. 1714-1725, 2010.
11. C. Castellani, R. A. Lindtner, P. Hausbrandt et al.,"Boneimplant interface strength and osseointegration: biodegradable magnesium alloy versus standard titanium control," Acta Biomaterialia, vol. 7, no. 1, pp. 432-440, 2011.
12. H. Waizy, J. Diekmann, A. Weizbauer et al.,"In vivo study of a biodegradable orthopedic screw (MgYREZr-alloy) in a rabbit model for up to 12months," Journal of Biomaterials Applications, vol. 28, no. 5, pp. 667-675, 2014.
13. A. C. Hänzi, I. Gerber, M. Schinhammer, J. F. Löffler, and P. J. Uggowitzer,"On the in vitro and in vivo degradation performance and biological response of newbiodegradable Mg-Y-Zn alloys," Acta Biomaterialia, vol. 6, no. 5, pp. 1824-1833, 2010.
14. S.-M. Kim, J.-H. Jo, S.-M. Lee et al.,"Hydroxyapatite-coated magnesium implants with improved in vitro and in vivo biocorrosion, biocompatibility, and bone response," Journal of Biomedical Materials Research Part A, vol. 102, no. 2, pp. 429-441, 2014.
15. S. F. Fischerauer, T. Kraus, X. Wu et al.,"In vivo degradation performance of micro-arc-oxidized magnesium implants: a micro-CT study in rats," Acta Biomaterialia, vol. 9, no. 2, pp. 5411-5420, 2013.
16. S. Shadanbaz, J. Walker, M. P. Staiger, G. J. Dias, and A. Pietak,"Growth of calcium phosphates on magnesium substrates for corrosion control in biomedical applications via immersion techniques," Journal of Biomedical Materials Research Part B: Applied Biomaterials, vol. 101, no. 1, pp. 162-172, 2013.
17. J.Wang, J. Tang, P. Zhang et al.,"Surfacemodification ofmagnesium alloys developed for bioabsorbable orthopedic implants: a general review," Journal of BiomedicalMaterials Research Part B: Applied Biomaterials, vol. 100, no. 6, pp. 1691-1701, 2012.
18. J. A. Curran and T. W. Clyne,"Porosity in plasma electrolytic oxide coatings," Acta Materialia, vol. 54, no. 7, pp. 1985-1993, 2006.
19. C. Gasquères, G. Schneider, R. Nusko, G. Maier, E. Dingeldein, and A. Eliezer,"Innovative antibacterial coating by anodic spark deposition," Surface and Coatings Technology, vol. 206, no. 15, pp. 3410-3414, 2012.
20. E. V. Parfenov, A. L. Yerokhin, and A. Matthews,"Frequency response studies for the plasma electrolytic oxidation process," Surface and Coatings Technology, vol. 201, no. 21, pp. 8661-8670, 2007.
21. G. P.Wirtz, S. D. Brown, and W. M. Kriven,"Ceramic coatings by anodic spark deposition," Materials and Manufacturing Processes, vol. 6, no. 1, pp. 87-115, 1991.
22. A. L. Yerokhin, X. Nie, A. Leyland, A. Matthews, and S. J. Dowey,"Plasma electrolysis for surface engineering," Surface and Coatings Technology, vol. 122, no. 2-3, pp. 73-93, 1999.
23. L. R. Krishna, K. R. C. Somaraju, and G. Sundararajan,"The tribological performance of ultra-hard ceramic composite coatings obtained through microarc oxidation," Surface and Coatings Technology, vol. 163-164, pp. 484-490, 2003.
24. J. Tian, Z. Luo, S. Qi, and X. Sun,"Structure and antiwear behavior of micro-arc oxidized coatings on aluminum alloy," Surface and Coatings Technology, vol. 154, no. 1, pp. 1-7, 2002.
25. A. A. Voevodin, A. L. Yerokhin, V. V. Lyubimov, M. S. Donley, and J. S. Zabinski,"Characterization of wear protective Al-Si-O coatings formed on Al-based alloys by micro-arc discharge treatment," Surface and Coatings Technology, vol. 86-87, no. 2, pp. 516-521, 1996.
26. X. Nie, E. I.Meletis, J. C. Jiang, A. Leyland, A. L. Yerokhin, and A. Matthews,"Abrasive wear/corrosion properties and TEM analysis of Al2O3 coatings fabricated using plasma electrolysis," Surface and Coatings Technology, vol. 149, no. 2-3, pp. 245-251, 2002.
27. A. L. Yerokhin, X. Nie, A. Leyland, and A. Matthews,"Characterisation of oxide films produced by plasma electrolytic oxidation of a Ti-6Al-4V alloy," Surface and Coatings Technology, vol. 130, no. 2-3, pp. 195-206, 2000.
28. P. I. Butyagin, Y. V. Khokhryakov, and A. I. Mamaev,"Microplasma systems for creating coatings on aluminium alloys," Materials Letters, vol. 57, no. 11, pp. 1748-1751, 2003.
29. J. A. Curran and T. W. Clyne,"The thermal conductivity of plasma electrolytic oxide coatings on aluminium and magnesium," Surface and Coatings Technology, vol. 199, no. 2-3, pp. 177-183, 2005.
30. S. V. Gnedenkov, O. A. Khrisanfova, A. G. Zavidnaya et al.,"Production of hard and heat-resistant coatings on aluminium using a plasma micro-discharge," Surface and Coatings Technology, vol. 123, no. 1, pp. 24-28, 2000.
31. X. Lin, L. Tan, Q.Wang, G. Zhang, B. Zhang, and K. Yang,"In vivo degradation and tissue compatibility of ZK60 magnesium alloywith micro-arc oxidation coating in a transcorticalmodel," Materials Science and Engineering: C, vol. 33, no. 7, pp. 3881-3888, 2013.
32. T. A.Huehnerschulte, J. Reifenrath, B. von Rechenberg et al.,"In vivo assessment of the host reactions to the biodegradation of the twonovelmagnesiumalloysZEK100andAX30 inananimal model," BioMedical Engineering Online, vol. 11, no. 1, article 14, 2012.
33. Z.-R.Qi, Q. Zhang, L.-L. Tan et al.,"Comparison of degradation behavior and the associated bone response of ZK60 and PLLA in vivo," Journal of Biomedical Materials Research Part A, vol. 102, no. 5, pp. 1255-1263, 2014.
34. A. Bondarenko, N.Angrisani, A.Meyer-Lindenberg, J. M. Seitz, H.Waizy, and J. Reifenrath,"Magnesium-based bone implants: immunohistochemical analysis of peri-implant osteogenesis by evaluation of osteopontin and osteocalcin expression," Journal of BiomedicalMaterials Research PartA, vol. 102, no. 5, pp. 1449-1457, 2014.
35. L. Wu, B. J. C. Luthringer, F. Feyerabend, A. F. Schilling, and R. Willumeit,"Effects of extracellular magnesium on the differentiation and function of human osteoclasts," Acta Biomaterialia, vol. 10, no. 6, pp. 2843-2854, 2014.
36. S. Yoshizawa, A. Brown, A. Barchowsky, and C. Sfeir,"Magnesium ion stimulation of bone marrow stromal cells enhances osteogenic activity, simulating the effect of magnesium alloy degradation," Acta Biomaterialia, vol. 10, no. 6, pp. 2834-2842, 2014.
37. Y.-H. Leem, K.-S. Lee, J.-H. Kim, H.-K. Seok, J.-S. Chang, and D.-H. Lee,"Magnesium ions facilitate integrin alpha 2-and alpha 3-mediated proliferation and enhance alkaline phosphatase expression and activity in hBMSCs," Journal of Tissue Engineering and Regenerative Medicine, 2014.