Combined effect of silica fume and expanded vermiculite on properties of lightweight mortars at ambient and elevated temperatures

Construction and Building Materials

Volumn 88, Issue , 2015, Pages 175-187

  Koksal, Fuat ^a   Gencel, Osman ^b   Kaya, Mehmet ^c  

^a BOZOK UNIVERSITY   (Turkey)

^b BARTIN UNIVERSITY   (Turkey)

^c SAKARYA UNIVERSITY   (Turkey)

Author keywords

Elevated temperature; Lightweight mortar; Silica fume; Vermiculite

Indexed keywords

FIRE RESISTANCE; FIREPROOFING; SILICA; SILICA FUME; THERMAL CONDUCTIVITY; WATER ABSORPTION;

ABSORPTION VALUES; ELEVATED TEMPERATURE; EXPANDED VERMICULITE; FIRE RESISTANT MATERIALS; LIGHTWEIGHT MORTARS; THERMAL CONDUCTIVITY COEFFICIENT; THERMAL PERFORMANCE; VERMICULITE;

MORTAR;

EID: 84928985429     PISSN: 09500618     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.conbuildmat.2015.04.021     Document Type: Article

References (63)

1. O. Sengul, S. Azizi, F. Karaosmanoglu, and M.A. Tasdemir Effect of expanded perlite on the mechanical properties and thermal conductivity of lightweight concrete Energy Build 43 2 2011 671 676
2. M. Sutcu Influence of expanded vermiculite on physical properties and thermal conductivity of clay bricks Ceram Int 41 2 2015 2819 2827
3. M. Shannag Characteristics of lightweight concrete containing mineral admixtures Constr Build Mater 25 2 2011 658 662
4. A. Kan, and R. Demirboga A novel material for lightweight concrete production Cement Concr Compos 31 7 2009 489 495
5. O. Unal, T. Uygunoglu, and A. Yildiz Investigation of properties of low-strength lightweight concrete for thermal insulation Build Environ 42 2 2007 584 590
6. R. Demirboga, and R. Gül The effects of expanded perlite aggregate, silica fume and fly ash on the thermal conductivity of lightweight concrete Cem Concr Res 33 5 2003 723 727
7. B. Chen, and N. Liu A novel lightweight concrete-fabrication and its thermal and mechanical properties Constr Build Mater 44 2013 691 698
8. Z.-F. Jin, Y. Asako, Y. Yamaguchi, and M. Harada Fire resistance test for fire protection materials with high water content Int J Heat Mass Transf 43 24 2000 4395 4404
9. C.-G. Go, J.-R. Tang, J.-H. Chi, C.-T. Chen, and Y.-L. Huang Fire-resistance property of reinforced lightweight aggregate concrete wall Constr Build Mater 30 2012 725 733
10. A. Al-Sibahy, and R. Edwards Thermal behaviour of novel lightweight concrete at ambient and elevated temperatures: experimental, modelling and parametric studies Constr Build Mater 31 2012 174 187
11. J-.H.J. Kim, Y.M. Lim, J.P. Won, and H.G. Park Fire resistant behavior of newly developed bottom-ash-based cementitious coating applied concrete tunnel lining under RABT fire loading Constr Build Mater 24 10 2010 1984 1994
12. I. Türkmen, and S.B. FIndIk Several properties of mineral admixtured lightweight mortars at elevated temperatures Fire Mater 37 5 2013 337 349
13. S. AydIn, and B. Baradan Effect of pumice and fly ash incorporation on high temperature resistance of cement based mortars Cem Concr Res 37 6 2007 988 995
14. J. Antonio, and D. Mateus Influence of low frequency bands on airborne and impact sound insulation single numbers for typical Portuguese buildings Appl Acoust 89 2015 141 151
15. N. Takao, J. Xuemei, M. Isao, and S. Shigeo The influence of the sound absorption ability by the aggregate size and void ratio of porous concrete about sound absorption characteristics of porous concrete Proc Jpn Constr Inst 23 1 2001 163 168
16. A. Marolf, N. Neithalath, E. Sell, K. Wegner, J. Weiss, and J. Olek Influence of aggregate size and gradation on acoustic absorption of enhanced porosity concrete ACI Mater J 101 1 2004
17. S.B. Park, D.S. Seo, and J. Lee Studies on the sound absorption characteristics of porous concrete based on the content of recycled aggregate and target void ratio Cem Concr Res 35 9 2005 1846 1854
18. H. Kim, and H. Lee Influence of cement flow and aggregate type on the mechanical and acoustic characteristics of porous concrete Appl Acoust 71 7 2010 607 615
19. H. Kim, J. Jeon, and H. Lee Workability, and mechanical, acoustic and thermal properties of lightweight aggregate concrete with a high volume of entrained air Constr Build Mater 29 2012 193 200
20. J.A. Rossignolo, M.V. Agnesini, and J.A. Morais Properties of high-performance LWAC for precast structures with Brazilian lightweight aggregates Cement Concr Compos 25 1 2003 77 82
21. K.S. Youm, Y.J. Jeong, E.S.H. Han, and T.S. Yun Experimental investigation on annual changes in mechanical properties of structural concretes with various types of lightweight aggregates Constr Build Mater 73 2014 442 451
22. L. Nguyen, A.-L. Beaucour, S. Ortola, and A. Noumowé Influence of the volume fraction and the nature of fine lightweight aggregates on the thermal and mechanical properties of structural concrete Constr Build Mater 51 2014 121 132
23. N.U. Kockal, and T. Ozturan Durability of lightweight concretes with lightweight fly ash aggregates Constr Build Mater 25 3 2011 1430 1438
24. M. Haque, H. Al-Khaiat, and O. Kayali Strength and durability of lightweight concrete Cement Concr Compos 26 4 2004 307 314
25. J.A. Bogas, J. de Brito, and J. Cabaço Long-term behaviour of concrete produced with recycled lightweight expanded clay aggregate concrete Constr Build Mater 65 2014 470 479
26. J.A. Rossignolo, and M.V. Agnesini Durability of polymer-modified lightweight aggregate concrete Cement Concr Compos 26 4 2004 375 380
27. C.-L. Hwang, and M.-F. Hung Durability design and performance of self-consolidating lightweight concrete Constr Build Mater 19 8 2005 619 626
28. K. Hossain, S. Ahmed, and M. Lachemi Lightweight concrete incorporating pumice based blended cement and aggregate: mechanical and durability characteristics Constr Build Mater 25 3 2011 1186 1195
29. V. Gerard Encyclopedia of sediments and sedimentary rocks 2003 Kluwer Academic Publishers Cornwall
30. M. Akao, A. Yamazaki, and Y. Fukuda Vermiculite board for novel building material J Mater Sci Lett 22 21 2003 1483 1485
31. F. Koksal, O. Gencel, W. Brostow, and H.H. Lobland Effect of high temperature on mechanical and physical properties of lightweight cement based refractory including expanded vermiculite Mater Res Innovations 16 1 2012 7 13
32. A. Schackow, C. Effting, M.V. Folgueras, S. Güths, and G.A. Mendes Mechanical and thermal properties of lightweight concretes with vermiculite and EPS using air-entraining agent Constr Build Mater 57 2014 190 197
33. L. Silva, R. Ribeiro, J. Labrincha, and V. Ferreira Role of lightweight fillers on the properties of a mixed-binder mortar Cement Concr Compos 32 1 2010 19 24
34. A. Mladenovic, J. Suput, V. Ducman, and A.S. Skapin Alkali-silica reactivity of some frequently used lightweight aggregates Cem Concr Res 34 10 2004 1809 1816
35. J. Formosa, L. Haurie, J. Chimenos, A.M. Lacasta, and J.R. Rosell Comparative study of magnesium by-products and vermiculite formulations to obtain fire resistant mortars 2008 Materials Science Forum: Trans Tech Publ 898 902
36. F. Koksal, J.J. del Coz Diaz, O. Gencel, and F.P. Alvarez Rabanal Experimental and numerical analysis of new bricks made up of polymer modified-cement using expanded vermiculite Comput Concr 12 3 2013 19 36
37. O. Gencel, J.J. del Coz Diaz, M. Sutcu, F. Koksal, F.A. Rabanal, and G. Martinez-Barrera Properties of gypsum composites containing vermiculite and polypropylene fibers: numerical and experimental results Energy Build 70 2014 135 144
38. S. Abidi, B. Nait-Ali, Y. Joliff, and C. Favotto Impact of perlite, vermiculite and cement on the thermal conductivity of a plaster composite material: experimental and numerical approaches Compos B Eng 68 2015 392 400
39. C. Martias, Y. Joliff, and C. Favotto Effects of the addition of glass fibers, mica and vermiculite on the mechanical properties of a gypsum-based composite at room temperature and during a fire test Compos B Eng 62 2014 37 53
40. M.O.B. Melo, L.B. da Silva, A.S. Coutinho, V. Sousa, and N. Perazzo Energy efficiency in building installations using thermal insulating materials in northeast Brazil Energy Build 47 2012 35 43
41. TS EN 197-1 Cement. Part 1: compositions and conformity criteria for common cements 2005 Turkish Standards Institution Ankara, Turkey
42. M. Valaskova, G.S. Martynkova, B. Smetana, and S. Studentova Influence of vermiculite on the formation of porous cordierites Appl Clay Sci 46 2 2009 196 201
43. L. Perez-Maqueda, V. Balek, J. Poyato, J. Perez-Rodriquez, J. Subrt, and I. Bountsewa Study of natural and ion exchanged vermiculite by emanation thermal analysis, TG, DTA and XRD J Therm Anal Calorim 71 3 2003 715 726
44. E. Erdogmus Combined effect of waste colemanite and silica fume on properties of cement mortar Sci Eng Compos Mater 21 3 2014 369 375
45. A.M. Neville Properties of concrete 2000 Prentice Hall London
46. Y. Sahin, and F. Köksal The influences of matrix and steel fibre tensile strengths on the fracture energy of high-strength concrete Constr Build Mater 25 4 2011 1801 1806
47. TS EN 12350-6 Testing fresh concrete - Part 6: density 2010 Turkish Standards Institution Ankara, Turkey
48. TS EN 1015-3 Methods of test for mortar for masonry- Part 3: determination of consistence of fresh mortar (by flow table) 2013 Turkish Standards Institution Ankara, Turkey
49. TS EN 12390-3 Testing hardened concrete - Part 3: Compressive strength of test specimens 2010 Turkish Standards Institution Ankara, Turkey
50. TS EN 12390-5 Testing hardened concrete - Part 5: flexural strength of test specimens 2010 Turkish Standards Institution Ankara, Turkey
51. ASTM C 597. Standard test method for pulse velocity through concrete. Pennsylvania, USA: Annual Book of ASTM Standards; 1997.
52. J. Cha, J. Seo, and S. Kim Building materials thermal conductivity measurement and correlation with heat flow meter, laser flash analysis and TCi J Therm Anal Calorim 109 1 2012 295 300
53. D. Mikulic, B. Milovanovic, and I. Gabrijel Analysis of thermal properties of cement paste during setting and hardening. Nondestructive testing of materials and structures 2013 Springer 465 471
54. J. Formosa, J. Chimenos, A. Lacasta, L. Haurie, and J. Rosell Novel fire-protecting mortars formulated with magnesium by-products Cem Concr Res 41 2 2011 191 196
55. K.G. Babu, and D.S. Babu Behaviour of lightweight expanded polystyrene concrete containing silica fume Cem Concr Res 33 5 2003 755 762
56. T. Uygunoglu, W. Brostow, O. Gencel, and I.B. Topcu Bond strength of polymer lightweight aggregate concrete Polym Compos 34 12 2013 2125 2132
57. B. Nait-Ali, K. Haberko, H. Vesteghem, J. Absi, and D. Smith Preparation and thermal conductivity characterisation of highly porous ceramics: comparison between experimental results, analytical calculations and numerical simulations J Eur Ceram Soc 27 2 2007 1345 1350
58. B. Zhang, and C.S. Poon Use of furnace bottom ash for producing lightweight aggregate concrete with thermal insulation properties J Clean Prod 2015 10.1016/j.jclepro.2015.03.007
59. M.Y.J. Liu, L.U. Alengram, M.Z. Jumaat, and K.H. Mo Evaluation of thermal conductivity, mechanical and transport properties of lightweight aggregate foamed geopolymer concrete Energy Build 72 2014 238 245
60. K.-H. Kim, S.-E. Jeon, J.-K. Kim, and S. Yang An experimental study on thermal conductivity of concrete Cem Concr Res 33 3 2003 363 371
61. R. Hamid, K. Yusof, and M. Zain A combined ultrasound method applied to high performance concrete with silica fume Constr Build Mater 24 1 2010 94 98
62. M.A. Kewalramani, and R. Gupta Concrete compressive strength prediction using ultrasonic pulse velocity through artificial neural networks Autom Constr 15 3 2006 374 379
63. M.R. Veiga, A. Velosa, and A. Magalhaes Experimental applications of mortars with pozzolanic additions: characterization and performance evaluation Constr Build Mater 23 1 2009 318 327