Statistical analysis of laminar convective heat transfer of mwcnt-deionized water nanofluid using the response surface methodology

Numerical Heat Transfer; Part A: Applications

Volumn 68, Issue 4, 2015, Pages 454-469

  Shanbedi, Mehdi ^a   Zeinali Heris, Saeed ^a   Maskooki, Abdolmajid ^b   Eshghi, Hossein ^a  

^a FERDOWSI UNIVERSITY OF MASHHAD   (Iran)

^b RESEARCH INSTITUTE OF FOOD SCIENCE AND TECHNOLOGY RIFST   (Iran)

Author keywords

[No Author keywords available]

Indexed keywords

DEIONIZED WATER; FLOW RATE; HEAT CONVECTION; HEAT FLUX; HEAT TRANSFER; LAMINAR FLOW; MAGNETIC FIELDS; NANOFLUIDICS; SODIUM DODECYL SULFATE; SODIUM SULFATE; STATISTICAL METHODS; SURFACE ACTIVE AGENTS; SURFACE PROPERTIES; YARN;

CETYL TRIMETHYL AMMONIUM BROMIDES; CONSTANT WALL HEAT FLUX; CONVECTIVE HEAT TRANSFER; FORCED CONVECTIVE HEAT TRANSFER; LAMINAR FLOW REGIMES; MAXIMUM HEAT TRANSFER; RESPONSE SURFACE METHODOLOGY; STATISTICAL MODELING;

MULTIWALLED CARBON NANOTUBES (MWCN);

EID: 84928677859     PISSN: 10407782     EISSN: 15210634     Source Type: Journal    
DOI: 10.1080/10407782.2014.986003     Document Type: Article

References (30)

1. S. U. S. Choi, Enhancing Thermal Conductivity of Fluids with Nanoparticles, presented at the International Mechanical Engineering Congress and Exposition, pp. 99-105, San Francisco, USA, 1995.
2. S. Zeinali Heris, M. N. Esfahany, and G. Etemad, Numerical Investigation of Nanofluid Laminar Convective Heat Transfer through a Circular Tube, Numer. Heat Transfer-Part A Appl., vol. 52, pp. 1043-1058, 2007.
3. 3/Water Nanofluid in Double Pipe and Shell and Tube Heat Exchangers, Heat Transfer-Part A Appl., vol. 63, pp. 941-958, 2013.
4. M. M. Rahman, M. M. Billah, M. Hasanuzzaman, R. Saidur, and N. A. Rahim, Heat Transfer Enhancement of Nanofluids in a Lid-Driven Square Enclosure, Heat Transfer-Part A Appl., vol. 62, pp. 973-991, 2012.
5. S. Sivasankaran and K. L. Pan, Natural Convection of Nanofluids in a Cavity with Non-uniform Temperature Distributions on Side Walls, Heat Transfer-Part A Appl., vol. 65, pp. 247-268, 2013.
6. B. Ghasemi and S. M. Aminossadati, Natural Convection Heat Transfer in an Inclined Enclosure Filled with a Water-Cuo Nanofluid, Heat Transfer-Part A Appl., vol. 55, pp. 807-823, 2009.
7. 3-Water Nanofluid for an Electronic Liquid Cooling System, Appl. Therm. Eng., vol. 27, pp. 1501-1506, 2007.
8. C. Kleinstreuer, J. Li, and J. Koo, Microfluidics of Nano-Drug Delivery, Int. J. Heat Mass Transfer, vol. 51, pp. 5590-5597, 2008.
9. J. Buongiorno, L. Hu, G. Apostolakis, R. Hannink, T. Lucas, and A. Chupin, A Feasibility Assessment of the use of Nanofluids to Enhance the in-Vessel Retention Capability in Light-Water Reactors, Nucl. Eng. Des., vol. 239, pp. 941-948, 2009.
10. M. Shokrgozar, S. Zeinali Heris, S. Poorpharhang, M. Shanbedi, and S. Noie, Experimental Study of Heat Transfer of a Car Radiator with CuO/Ethylene Glycol-Water as a Coolant, J. Disper. Sci. Technol., vol. 35, pp. 677-684, 2014.
11. 2 Nanoparticles (Nanofluids) Flowing Upward Through a Vertical Pipe, Int. J. Heat Mass Transfer, vol. 50, pp. 2272-2281, 2007.
12. S. Fotukian and M. Nasr Esfahany, Experimental Study of Turbulent Convective Heat Transfer and Pressure Drop of Dilute CuO/Water Nanofluid Inside a Circular Tube, Int. Commun. Heat Mass Transfer, vol. 37, pp. 214-219, 2010.
13. 3/Water Nanofluid Inside a Circular Tube, Int. J. Heat Fluid Flow, vol. 31, pp. 606-612, 2010.
14. R. Lotfi, A. M. Rashidi, and A. Amrollahi, Experimental Study on the Heat Transfer Enhancement of MWNT-Water Nanofluid in a Shell and Tube Heat Exchanger, Int. Commun. Heat Mass Transfer, vol. 39, pp. 108-111, 2012.
15. S. J. Aravind, P. Baskar, T. T. Baby, R. K. Sabareesh, S. Das, and S. Ramaprabhu, Investigation of Structural Stability, Dispersion, Viscosity, and Conductive Heat Transfer Properties of Functionalized Carbon Nanotube Based Nanofluids, J. Phys. Chem. C, vol. 115, pp. 16737-16744, 2011.
16. M. Shanbedi, A. Amiri, S. Rashidi, S. Zeinali Heris, and M. Baniadam, Thermal Performance Prediction of Two-Phase Closed Thermosyphon Using Adaptive Neuro-Fuzzy Inference System, Heat Transfer Engineering, Publish Online 2014. doi: 10.1080/01457632.2014.916161.
17. H. Salehi, S. Zeinali Heris, M. K. Salooki, and S. H. Noei, Designing a Neural Network for Closed Thermosyphon with Nanofluid using a Genetic Algorithm, Braz. J. Chem. Eng., vol. 28, pp. 157-168, 2011.
18. M. Shanbedi, D. Jafari, A. Amiri, S. Zeinali Heris, and M. Baniadam, Prediction of Temperature Performance of a Two-Phase Closed Thermosyphon using Artificial Neural Network, Heat Mass Transfer, vol. 49, pp. 65-73, 2013.
19. H. Salehi, S. Zeinali Heris, M. Esfandyari, and M. Koolivand, Nero-Fuzzy Modeling of the Convection Heat Transfer Coefficient for the Nanofluid, Heat Mass Transfer, vol. 49, pp. 575-583, 2013.
20. F. Selimefendigil and H. F. Oztop, Estimation of the Mixed Convection Heat Transfer of a Rotating Cylinder in a Vented Cavity Subjected to Nanofluid by Using Generalized Neural Networks, Numer. Heat Transfer-Part A Appl., vol. 65, pp. 165-185, 2013.
21. M. Gavara, Asymmetric Forced Convection of Nanofluids in a Channel with Symmetrically Mounted Rib Heaters on Opposite Walls, Numer. Heat Transfer-Part A Appl., vol. 62, pp. 884-904, 2012.
22. M. Shanbedi, S. Zeinali Heris, A. Amiri, S. M. S. Adyani-Rad, M. Alizadeh, and M. Baniadam, Optimization of Thermal Efficiency of a Two-Phase Closed Thermosyphon using Active Learning on the Human Algorithm Interaction, Numer. Heat Transfer-Part A Appl., vol. 66, pp. 947-962, 2014.
23. A. de Risi, M. Milanese, and D. Laforgia, Modelling and Optimization of Transparent Parabolic Trough Collector Based on Gas-Phase Nanofluids, Renew. Energ., vol. 58, pp. 134-139, 2013.
24. 2 Nanofluid with CFD, Numer. Heat Transfer-Part A Appl., vol. 63, pp. 795-806, 2013.
25. M. K. Moraveji and M. Hejazian, CFD Examination of Convective Heat Transfer and Pressure Drop in a Horizontal Helically Coiled Tube with CuO/Oil Base Nanofluid, Numer. Heat Transfer-Part A Appl. , vol. 66, pp. 315-329, 2014.
26. A. Kazemi-Beydokhti, H. A. Namaghi, and S. Zeinali Heris, Identification of the Key Variables on Thermal Conductivity of CuO Nanofluid by a Fractional Factorial Design Approach, Numer. Heat Transfer-Part B Fundam., vol. 64, pp. 480-495, 2013.
27. J. D. Holman, Experimental Methods for Engineers, 5th ed., McGrow-Hill, New York, 1989.
28. M. Shanbedi, S. Zeinali Heris, A. Amiri, and M. Baniadam, Improvement in Heat Transfer of a Two-Phased Closed Thermosyphon using Silver-Decorated MWCNT/ Water, J. Disper. Sci. Technol., vol. 35, pp. 1086-1096, 2014.
29. B. Farajollahi, S. G. Etemad, and M. Hojjat, Heat Transfer of Nanofluids in a Shell and Tube Heat Exchanger, Int. J. Heat Mass Transfer, vol. 53, pp. 12-17, 2010.
30. 3/Water Nanofluid in Circular Tube, Int, J. Heat Fluid Flow, vol. 28, pp. 203-210, 2007.