Bamboo cellulosic pulp produced by the ethanol/water process for reinforcement applications;Polpa celulÓsica de bambu produzida pelo processo etanol/água para aplicações de reforço

Ciencia Florestal

Volumn 25, Issue 1, 2015, Pages 127-135

  Da Costa Correia, Viviane ^a   Da Silva Curvelo, Antonio Aprigio ^a   Marabezi, Karen ^a   De Souza Almeida, Alessandra Etuko Feuzicana ^b   Savastano Junior, Holmer ^a  

^a UNIVERSITY OF SÃO PAULO   (Brazil)

^b Centro Universitario de Araraquara   (Brazil)

Author keywords

Bamboo; Cellulose; Ethanol; Organosolv pulping

Indexed keywords

EID: 84926471506     PISSN: 01039954     EISSN: 19805098     Source Type: Journal    
DOI: None     Document Type: Article

References (53)

1. Alemdar, A.; Sain, M. Isolation and characterization of nanofibers from agricultural residues - Wheat straw and soy hulls. Bioresource Technology, v. 99, p. 1664-1671, 2008.
2. Almeida, A. E. F. S. et al. Improved durability of vegetable fiber reinforced cement composite subject to accelerated carbonation at early age. Cement & Concrete Composites, 2013, http://dx.doi.org/10.1016/j.cemconcomp.2013.05.001.
3. Azzini, A. et al. Avaliação quantitativa da massa fibrosa e vazios em colmos de bambu. Bragantia, v. 49, n. 1, p. 141-146, 1990.
4. Azzini, A.; Gondim-Tomaz, R. M. A. Extração de amido em cavacos de bambu tratados com solução diluída de hidróxido de sódio. Bragantia, v. 55, n. 2, p. 215-219, 1996.
5. Aziz, S.; Sarkanen, K. Organosolv pulping - a review. Tappi Journal, v. 72, p. 169-175, 1989.
6. Braaten, K. R.; Molteberg, D. A mathematical method for determining fiber wall thickness and fiber width. Tappi Journal, v. 3, p. 9-12, 2004.
7. Browning, B. L. Methods of Wood Chemistry. New York: Interscience Publishers, 1967.498 p.
8. Ciaramello, D. Bamboo as a raw material for the paper industry - Studies of three cooking processes with Bambusa tuldoides Munro. Bragantia, v. 29, p. 11-22, 1970.
9. Claramunt, J. et al. The hornification of vegetable fibers to improve the durability of cement mortar composites. Cement & Concrete Composites, v. 33, p. 586-595, 2011.
10. Coutts, R. S. P.; NI, Y. Autoclaved bamboo pulp fibre reinforced cement. Cement & Concrete Composites, v. 17, p. 99-106, 1995.
11. De Groot, B., Van Dam, J. E. G.; Van Triet K. Alkaline pulping of hemp woody core: kinetic modeling of lignin, xylan and cellulose extraction and degradation. Holzforschung, v. 49, p. 332-342, 1995.
12. Duff, S. J. B.; Murray, W. D. Bioconversion of forest products industry waste cellulosic to fuel ethanol: a review. Bioresource Technology, v. 55, p. 1-33, 1996.
13. Evans, R. et al. Changes in cellulose crystallinity during kraft pulping. Comparison of infrared, X-ray diffraction and solid state NMR results. Holzforschung, v. 49, p. 498-504, 1995.
14. Gümüskaya, E.; Usta, M.; Kirci, H. The effects of various pulping conditions on crystalline structure of cellulose in cotton linters. Polymer Degradation and Stability, v. 81, p. 559-564, 2003.
15. Hergert, H. Developments in Organosolv Pulping - An Overview. In: Young, R. A.; Akthar, M., Ed(s). Environmentally Friendly Technologies for Pulp and Paper Industry. New York: John Wiley & Sons Inc., 1998. p. 5-67.
16. INTERNATIONAL ORGANIZATION FOR STANDARDIZATION. ISO. 2004. ISO 302: Pulps - Determination of Kappa number.
17. INTERNATIONAL ORGANIZATION FOR STANDARDIZATION. ISO. 1974. ISO 624: Pulps - Determination of dichloromethane soluble matter.
18. Joaquim, A. P. et al. Sisal organosolv pulp as reinforcement for cement based composites. Materials Research, v. 12, p. 305-314, 2009.
19. Khedari, J.; Charoemvai, S.; Hiruanlabh, J. New insulating particle boards from durian peel and coconut coir. Journal of Building and Environment, v. 38, p. 435-441, 2003.
20. Li, M. et al. Formic acid based organosolv pulping of bamboo (Phyllostachys acuta): Comparative characterization of the dissolved lignins with milled wood lignin. Chemical Engineering Journal, v. 179, p. 80-89, 2012.
21. Levlin, J. E.; Söderhjem, L. Pulp and paper testing. Papermaking Science and Technology Series. Finnish Paper Engineers ‘Association: Helsinki, Finland. 1999. v. 17. 288 p.
22. López, F. et al. Leucaena diversifolia a new raw material for paper production by soda-ethanol pulping process. Chemical Engineering Research and Design, v. 88, p. 1-9, 2010.
23. Mohr, B. J.; Nanko, H.; Kurtis, K. E. Durability of Kraft pulp fiber-cement composites to wet/dry cycling. Cement & Concrete Composites, v. 27, p. 435-448, 2005.
24. Pacheco-Torgal, F.; Jalali, S. Cementitious building materials reinforced with vegetable fibres. A review. Construction Building Materials, v. 25, p. 575-581, 2011.
25. Panthapulakkal, S.; Zereshkian, M.; Sain, M. Preparation and characterization of wheat straw fibers for reinforcing application in injection molded thermoplastic composites, Bioresource Technology, v. 97, p. 265-272, 2006.
26. Pasquini, D. et al. Surface esterification of cellulose fibres: processing and characterisation of low-density polyethylene/cellulose fibres composites. Composites Science and Technology, v. 68, p. 193-201, 2008.
27. Pye, E. K; Lora, J. H. The Alcell process, a proven alternative to kraft pulping. Tappi Journal, v.74, p. 991-996, 1991.
28. Ruiz, H. A. et al. Development and characterization of an environmentally friendly process sequence (Auto hydrolysis and Organosolv) for wheat straw delignification. Applied Biochemistry and Biotechnology, v. 164, p. 629-641, 2011.
29. Ruzene, D. S.; Gonçalves, A. R. Ethanol/ Water pulp enzymatic pretreatment: Chemical and FTIR-PCA analyses. Chemical Papers, v. 61, p. 472-476, 2007.
30. Ruzene, D. S.; Gonçalves, A. R. Effect of dose of xylanase on bleachability of sugarcane bagasse ethanol/water pulps. Applied Biochemistry and Biotechnology, v. 105, p. 769-774, 2003.
31. Sain, M.; Panthapulakkal, S. Bioprocess preparation of wheat straw fibers and their characterization. Industrial Crops and Products, v. 23, p. 1-8, 2006.
32. SCANDINAVIAN PULP TEST STANDARDS. SCAN. 1998. SCAN-CM 15:88: Viscosity in cupriethylenediamine (CED) solution. Stockholm.
33. Segal, L. et al. An empirical method for estimating the degree of crystallinity of native cellulose using X-ray difractometer. Textile Research Journal, v. 29, p. 786-794, 1959.
34. Sena-Martins, G; Almeida-Vara, E.; Duarte, J. C. Eco-friendly new products from enzymatically modified industrial lignins. Industrial crops and products, v. 27,p. 189-195, 2008.
35. Shatalov, A. A.; Pereira, H. Arundo donax L. reed: New perspectives for pulping and bleaching-3. Ethanol-reinforced alkaline pulping. Tappi Journal, v. 3, n. 2, p. 27-31, 2004.
36. Shatalov, A. A; Pereira, H. Arundo donax L. reed: New perspectives for pulping and bleaching. 5. Ozone-based TCF bleaching of organosolv pulps. Bioresource Technology, v. 99, n. 3, p. 472-478, 2008.
37. Sidiras, D.; Koukios, E. Simulation of acid- catalysed organosolv fractionation of wheat straw. Bioresource Technology, v. 94, p. 91-98, 2004.
38. Sridach, W. The environmentally benign pulping process of non-wood fibers. Suranaree Journal of Science and Technology, v. 17, p. 105-123, 2010.
39. Stewart, D. Lignin as a base material for materials applications: Chemistry, application and economics. Industrial crops and products, v. 27, p. 202-207, 2008.
40. Sundar, S. T.; SAIN, M. M.; Oksman, K. Characterization of microcrystalline cellulose and cellulose long fiber modified by iron salt. Carbohydrate Polymers, v. 80, p. 35-43, 2010.
41. TECHNICAL ASSOCIATION OF THE PULP AND PAPER INDUSTRY. TAPPI. 1995. Tappi Test Methods, T 273 pm-95: Wet zero-span tensile strength of pulp. Tappi Press: Atlanta.
42. TECHNICAL ASSOCIATION OF THE PULP AND PAPER INDUSTRY. TAPPI. Tappi Test Methods, T 231 cm-96: Zerospan breaking strength of pulp (dry zero-span tensile). Tappi Press: Atlanta, 1996.
43. TECHNICAL ASSOCIATION OF THE PULP AND PAPER INDUSTRY. TAPPI.Tappi Test Methods, T 236 om-99: Kappa number of pulp. Tappi Press: Atlanta, 1999.
44. TECHNICAL ASSOCIATION OF THE PULP AND PAPER INDUSTRY. TAPPI. Tappi Test Methods, T 222 om-98: Acid-insoluble lignin in wood and pulp. Tappi Press: Atlanta, 1998.
45. TECHNICAL ASSOCIATION OF THE PULP AND PAPER INDUSTRY. TAPPI. Tappi Test Methods, T 19 m-54: Holocellulose in Wood. Tappi Press: Atlanta, 1954.
46. TECHNICAL ASSOCIATION OF THE PULP AND PAPER INDUSTRY. TAPPI. Tappi Test Methods, T 203 cm-99: Alpha-, beta- and gamma-cellulose in pulp. Tappi Press: Atlanta 1999.
47. Tonoli, G. H. D. et al. Eucalyptus pulp fibres as alternative reinforced to engineered cement-based composites. Industrial Crops and Products, v. 31, p. 225-232, 2010.
48. Trepanier, R. J. Automatic fiber length and shape measurement by image analysis. Tappi Journal, v. 81, p. 152-154, 1998.
49. Van Soest, P. J. Development of a comprehensive system of feed analysis and its application to forage. Journal of Animal Science, v. 26, p. 119-128, 1967.
50. Vu, T. H. M.; Pakkanen, H.; Alén, R. Delignification of bamboo (Bambusa procera acher) Part 1. Kraft pulping and the subsequent oxygen delignification to pulp with a low kappa number. Industrial Crops and Products, v. 19, p. 49-57, 2004.
51. Wambua, P.; Ivens, J.; Verpoest, I. Natural fibers: can they replace glass in fiber reinforced plastics? Composites Science and Technology, v. 63, p. 1259-1264, 2003.
52. Yawalata, D.; Paszner, L. Cationic effect in high concentration alcohol organosolv pulping: The next generation biorefinery. Holzforschung, v. 58, 7-13, 2004.
53. Zeronian, S. H.; Buschle-Diller, G. Enhancing the reactivity and strength of cotton fibers. Journal of Applied Polymer Science, v. 45, p. 967-979, 1992.