Friction and wear of high electrical conductive carbon nanotube buckypaper/epoxy composites

Composites Science and Technology

Volumn 114, Issue , 2015, Pages 1-10

  Han, Jin Hua ^a,b   Zhang, Hui ^a   Chu, Peng Fei ^a,b   Imani, Abolhassan ^a,b   Zhang, Zhong ^a  

^a NATIONAL CENTER FOR NANOSCIENCE AND TECHNOLOGY   (China)

^b UNIVERSITY OF CHINESE ACADEMY OF SCIENCES   (China)

Author keywords

A. Carbon nanotubes; A. Polymer matrix composites (PMCs); B. Electrical properties; B. Friction wear; B. Mechanical properties

Indexed keywords

ADHESION; CARBON; EPOXY RESINS; FRICTION; INTERFACES (MATERIALS); MECHANICAL PROPERTIES; NANOFIBERS; OZONE; OZONE RESISTANCE; POLYMER MATRIX COMPOSITES; WEAR RESISTANCE; YARN;

CONDUCTIVE CARBON NANOTUBES; FRICTION/WEAR; FRICTIONAL COEFFICIENTS; HIGH ELECTRICAL CONDUCTIVITY; INTERFACIAL ADHESIONS; MECHANICAL AND ELECTRICAL PROPERTIES; POLYMER MATRIX COMPOSITES (PMCS); TRIBOLOGICAL PERFORMANCE;

CARBON NANOTUBES;

EID: 84926466167     PISSN: 02663538     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compscitech.2015.03.012     Document Type: Article

References (47)

1. 2. Compos Part A-Appl S 2004, 35(12):1385-1392.
2. Zhang H., Tang L.C., Zhang Z., Gu L., Xu Y.Z., Eger C. Wear-resistant and transparent acrylate-based coating with highly filled nanosilica particles. Tribol Int 2010, 43(1-2):83-91.
3. You Y.L., Li D.X., Si G.J., Deng X. Investigation of the influence of solid lubricants on the tribological properties of polyamide 6 nanocomposite. Wear 2014, 311(1-2):57-64.
4. Kadiyala A.K., Bijwe J. Surface lubrication of graphite fabric reinforced epoxy composites with nano- and micro-sized hexagonal boron nitride. Wear 2013, 301(1-2):802-809.
5. Lee S.M., Shin M.W., Jang H. Effect of carbon-nanotube length on friction and wear of polyamide 6,6 nanocomposites. Wear 2014, 320(1-2):103-110.
6. Zhang H., Zhang Z. Comparison of short carbon fibre surface treatments on epoxy composites - II. Enhancement of the wear resistance. Compos Sci Technol 2004, 64(13-14):2031-2038.
7. Zhang H., Zhang Z., Friedrich K. Effect of fiber length on the wear resistance of short carbon fiber reinforced epoxy composites. Compos Sci Technol 2007, 67(2):222-230.
8. Khun N., Zhang H., Lim L., Yue C., Hu X., Yang J. Tribological properties of short carbon fibers reinforced epoxy composites. Friction 2014, 1-14.
9. Lu Z.P., Friedrich K. On sliding friction and wear of PEEK and its composites. Wear 1995, 181-183, Part 2(0):624-631.
10. 2. Wear 2006, 260(7-8):869-878.
11. Zhang G., Rasheva Z., Schlarb A.K. Friction and wear variations of short carbon fiber (SCF)/PTFE/graphite (10vol.%) filled PEEK: effects of fiber orientation and nominal contact pressure. Wear 2010, 268(7-8):893-899.
12. Chang L., Zhang Z., Ye L., Friedrich K. Tribological properties of high temperature resistant polymer composites with fine particles. Tribol Int 2007, 40(7):1170-1178.
13. Kim K.S., Lee H.J., Lee C., Lee S.K., Jang H., Ahn J.H., et al. Chemical vapor deposition-grown graphene: the thinnest solid lubricant. ACS Nano 2011, 5(6):5107-5114.
14. Lee C., Li Q., Kalb W., Liu X.-Z., Berger H., Carpick R.W., et al. Frictional characteristics of atomically thin sheets. Science 2010, 328(5974):76-80.
15. Mungse H.P., Khatri O.P. Chemically functionalized reduced graphene oxide as a novel material for reduction of friction and wear. J Phys Chem C 2014, 118(26):14394-14402.
16. Huang T., Li T., Xin Y., Jin B., Chen Z., Su C., et al. Preparation and utility of a self-lubricating & anti-wear graphene oxide/nano-polytetrafluoroethylene hybrid. RSC Adv 2014, 4(38):19814-19823.
17. Song H.J., Li N., Li Y.J., Min C.Y., Wang Z. Preparation and tribological properties of graphene/poly(ether ether ketone) nanocomposites. J Mater Sci 2012, 47(17):6436-6443.
18. Wang H., Xie G., Zhu Z., Ying Z., Zeng Y. Enhanced tribological performance of the multi-layer graphene filled poly(vinyl chloride) composites. Compos Part A-Appl S 2014, 67:268-273.
19. Mo Y.F., Yang M.L., Lu Z.X., Huang F.C. Preparation and tribological performance of chemically-modified reduced graphene oxide/polyacrylonitrile composites. Compos Part A-Appl S 2013, 54:153-158.
20. Huang T., Xin Y.S., Li T.S., Nutt S., Su C., Chen H.M., et al. Modified graphene/polyimide nanocomposites: reinforcing and tribological effects. ACS Appl Mater Interfaces 2013, 5(11):4878-4891.
21. Saurin N., Sanes J., Bermudez M.D. Effect of graphene and ionic liquid additives on the tribological performance of epoxy resin. Tribol Lett 2014, 56(1):133-142.
22. Cui L.J., Geng H.Z., Wang W.Y., Chen L.T., Gao J. Functionalization of multi-wall carbon nanotubes to reduce the coefficient of the friction and improve the wear resistance of multi-wall carbon nanotube/epoxy composites. Carbon 2013, 54:277-282.
23. Wang H., Chang L., Yang X., Yuan L., Ye L., Zhu Y., et al. Anisotropy in tribological performances of long aligned carbon nanotubes/polymer composites. Carbon 2014, 67:38-47.
24. Meng H., Sui G.X., Xie G.Y., Yang R. Friction and wear behavior of carbon nanotubes reinforced polyamide 6 composites under dry sliding and water lubricated condition. Compos Sci Technol 2009, 69(5):606-611.
25. Men X.H., Zhang Z.Z., Song H.J., Wang K., Jiang W. Functionalization of carbon nanotubes to improve the tribological properties of poly(furfuryl alcohol) composite coatings. Compos Sci Technol 2008, 68(3-4):1042-1049.
26. Tang L.C., Zhang H., Han J.H., Wu X.P., Zhang Z. Fracture mechanisms of epoxy filled with ozone functionalized multi-wall carbon nanotubes. Compos Sci Technol 2011, 72(1):7-13.
27. Lahiri D., Singh V., Keshri A.K., Seal S., Agarwal A. Carbon nanotube toughened hydroxyapatite by spark plasma sintering: microstructural evolution and multiscale tribological properties. Carbon 2010, 48(11):3103-3120.
28. Dong B., Yang Z., Huang Y., Li H.L. Study on tribological properties of multi-walled carbon nanotubes/epoxy resin nanocomposites. Tribol Lett 2005, 20(3-4):251-254.
29. Cheng Q., Li M., Jiang L., Tang Z. Bioinspired layered composites based on flattened double-walled carbon nanotubes. Adv Mater 2012, 24(14):1838-1843.
30. Chu H.T., Zhang Z.C., Liu Y.J., Leng J.S. Self-heating fiber reinforced polymer composite using meso/macropore carbon nanotube paper and its application in deicing. Carbon 2014, 66:154-163.
31. Cheng Q.F., Bao J.W., Park J., Liang Z.Y., Zhang C., Wang B. High mechanical performance composite conductor: multi-walled carbon nanotube sheet/bismaleimide nanocomposites. Adv Funct Mater 2009, 19(20):3219-3225.
32. Han J.H., Zhang H., Chen M.J., Wang G.R., Zhang Z. CNT buckypaper/thermoplastic polyurethane composites with enhanced stiffness, strength and toughness. Compos Sci Technol 2014, 103:63-71.
33. Wang S., Liang Z., Pham G., Park Y-B., Wang B., Zhang C., et al. Controlled nanostructure and high loading of single-walled carbon nanotubes reinforced polycarbonate composite. Nanotechnology 2007, 18(9):095708.
34. Bradford P.D., Wang X., Zhao H., Maria J.-P., Jia Q., Zhu Y.T. A novel approach to fabricate high volume fraction nanocomposites with long aligned carbon nanotubes. Compos Sci Technol 2010, 70(13):1980-1985.
35. Díez-Pascual A.M., Guan J., Simard B., Gómez-Fatou M.A. Poly(phenylene sulphide) and poly(ether ether ketone) composites reinforced with single-walled carbon nanotube buckypaper: II - Mechanical properties, electrical and thermal conductivity. Compos Part A-Appl S 2012, 43(6):1007-1015.
36. Li Y.C., Tjong S.C., Li R.K.Y. Electrical conductivity and dielectric response of poly(vinylidene fluoride)-graphite nanoplatelet composites. Synth Met 2010, 160(17-18):1912-1919.
37. Allaoui A., Bai S., Cheng H.M., Bai J.B. Mechanical and electrical properties of a MWNT/epoxy composite. Compos Sci Technol 2002, 62(15):1993-1998.
38. Peng K., Liu L.Q., Li H.C., Meyer H., Zhang Z. Room temperature functionalization of carbon nanotubes using an ozone/water vapor mixture. Carbon 2011, 49(1):70-76.
39. Ashrafi B., Guan J., Mirjalili V., Hubert P., Simard B., Johnston A. Correlation between Young's modulus and impregnation quality of epoxy-impregnated SWCNT buckypaper. Compos Part A-Appl S 2010, 41(9):1184-1191.
40. Guo J., Li M., Liu Q.L., Gu Y.Z., Li Y.X., Zhang Z.G. Influence of oxidation and distribution of carbon nanotube on mechanical properties of buckypaper/epoxy composites. J Reinf Plast Compos 2013, 32(4):248-257.
41. Osswald S., Havel M., Gogotsi Y. Monitoring oxidation of multiwalled carbon nanotubes by Raman spectroscopy. J Raman Spectrosc 2007, 38(6):728-736.
42. Okpalugo T.I.T., Papakonstantinou P., Murphy H., McLaughlin J., Brown N.M.D. High resolution XPS characterization of chemical functionalised MWCNTs and SWCNTs. Carbon 2005, 43(1):153-161.
43. Tang L.C., Zhang H., Wu X.P., Zhang Z. A novel failure analysis of multi-walled carbon nanotubes in epoxy matrix. Polymer 2011, 52(9):2070-2074.
44. Chang L., Zhang Z., Ye L., Friedrich K. Tribological properties of epoxy nanocomposites: III. Characteristics of transfer films. Wear 2007, 262(5-6):699-706.
45. Arai S., Miyagawa K. Frictional and wear properties of cobalt/multiwalled carbon nanotube composite films formed by electrodeposition. Surf Coat Technol 2013, 235:204-211.
46. Scharf T.W., Neira A., Hwang J.Y., Tiley J., Banerjee R. Self-lubricating carbon nanotube reinforced nickel matrix composites. J Appl Phys 2009, 106(1):013508.
47. Suarez S., Rosenkranz A., Gachot C., Mucklich F. Enhanced tribological properties of MWCNT/Ni bulk composites - Influence of processing on friction and wear behaviour. Carbon 2014, 66:164-171.