Mixed Lubrication in Hydrodynamic Bearings

Mixed Lubrication in Hydrodynamic Bearings

Volumn 9781848216822, Issue , 2014, Pages 1-184

  Bonneau, Dominique ^a   Fatu, Aurelian ^a   Souchet, Dominique ^a  

^a NONE

Author keywords

[No Author keywords available]

Indexed keywords

HYDRODYNAMICS;

HYDRODYNAMIC BEARINGS; MIXED LUBRICATION; NUMERICAL PREDICTION MODELS;

LUBRICATION;

EID: 84926258028     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9781119004905     Document Type: Book

References (67)

1. DRAGOMIR-FATU R., Study and modeling of mixed lubrication and types of associated damage in motor Bearings (in French), PhD Thesis, University of Poitiers, France, 2009.
2. BIGERELLE M., IOST A., "A numerical method to calculate the Abbott parameters: a wear application", Tribology International, vol. 40, pp. 1319-1334, 2007.
3. BONNEAU D., FATU A., SOUCHET D., Hydrodynamic Bearings, ISTE, London and John Wiley & Sons, New York, 2014.
4. DRAGOMIR-FATU R., Etude et modélisation de la lubrification mixte et des modes d'avaries associés dans les paliers moteur, Doctorate Thesis, University of Poitiers, France, 2009. [Study and modeling of mixed lubrication and types of associated damage in motor bearings].
5. HAMROCK B.J., SCHMID S.R., JACOBSON B.O., Fundamentals of Fluid Film Lubrication, 2nd ed., Marcel Dekker Inc., New York/Basel, 2004.
6. ISO 25178-2:2012, Geometrical product specifications (GPS)-surface texture:areal-part 2: terms, definitions and surface texture parameters, International Organization for Standardization, Geneva, Switzerland, 2012.
7. ISO 4288:1996, Geometrical Product Specifications (GPS)-Surface texture:Profile method-Rules and procedures for the assessment of surface texture, International Organization for Standardization, Geneva, Switzerland, 1996.
8. ISO 12085-1996, Geometrical product specifications (GPS)-Surface texture:Profile method-Motif parameters, International Organization for Standardization, Geneva, Switzerland, 1996.
9. ISO 13565-1996, Characterization of Surfaces Having Stratified Functional. Properties. Part 1 Filtering and General Measurement Conditions, International Organization for Standardization, Geneva, Switzerland, 1996.
10. ISO 4287:1998, Geometrical Product Specifications (gps)-Surface Texture: Profile Method-Terms, Definitions And Surface Texture Parameters, International Organization for Standardization, Geneva, Switzerland, 1998.
11. STANDARD ISO NF EN 13565, AFNOR, La Plaine Saint-Denis, 1995.
12. STANDARD ISO NF EN 4287, AFNOR, La Plaine Saint-Denis, 1998.
13. STANDARD ISO NF EN 4288, AFNOR, La Plaine Saint-Denis, 1998.
14. STANDARD ISO NF EN 12085, AFNOR, La Plaine Saint-Denis, 1998.
15. ROBBE-VALLOIRE F., "Statistical analysis of asperities on a rough surface", Wear, vol. 249, pp. 401-408, 2001.
16. STOUT K.J., Development of Method for the Characterisation of Roughness in Three Dimensions, Butterworth Heinemann, London, 2000.
17. ALMQVIST A., On the effects of surface roughness in lubrication, Doctorate Thesis, Lulea University of Technology, Lulea, Sweden, 2006.
18. ALMQVIST A., ESSEL E.K., PERSSON L.-E., et al., "Homogenization of unstationary incompressible Reynolds equation", Tribology International, vol. 40, pp. 1344-1350, 2007.
19. BAYADA G., CHAMBAT M., "New models in the theory of the hydrodynamic lubrication of rough surfaces", Transactions of the ASME, vol. 110, pp. 402-407, 1988.
20. BAYADA G., CHAMBAT M., "Homogenization of the Stokes system in a thin film flow with rapidly varying thickness", Mathematical Modeling and Numerical Analysis, vol. 23, no. 2, pp. 205-234, 1989.
21. BAYADA G., FAURE J.B., "A double scale analysis approach of the Reynolds roughness comments and application to the journal bearing", Journal of Tribology, vol. 111, pp. 323-330, 1989.
22. BAYADA G., CIUPERCA S., JAI M., "Homogenization of variational equations and inequalities with small oscillating parameters. Application to the study of thin film unstationary lubrication flow", C. R. Acad. Sciences, t. 328, series II b, pp. 819-824, 2000.
23. BAYADA G., MARTIN S., VAZQUEZ C., "An average flow model of the Reynolds roughness including a mass-flow preserving cavitation model", Journal of Tribology, vol. 127, pp. 793-802, 2005.
24. BONNEAU D., FATU A., SOUCHET D., Thermo-hydrodynamic Lubrication in Hydrodynamic Bearings, ISTE, London and John Wiley & Sons, New York, 2014.
25. BONNEAU D., FATU A., SOUCHET D., Hydrodynamic Bearings, ISTE, London and John Wiley & Sons, New York, 2014.
26. DOBRICA M.B., FILLON M., MASPEYROT P., "Mixed elastohydro-dynamic lubrication in a partial journal bearing-Comparison between deterministic and stochastic models", Journal of Tribology, vol. 128, pp. 1-11, 2006.
27. DRAGOMIR-FATU R., Etude et modélisation de la lubrification mixte et des modes d'avaries associés dans les paliers moteur, Doctorate Thesis, University of Poitiers, France, 2009.
28. ESSEL E.K., Homogenization of Reynolds equations and of some parabolic problems via Rothe's method, Doctorate Thesis, Lulea University of Technology, Lulea, Sweden, 2008.
29. FATU A., BONNEAU D., DRAGOMIR-FATU R., "Computing hydrodynamic pressure in mixed lubrication by modified Reynolds equation", Journal of Engineering Tribology, vol. 226, pp. 1074-1094, 2012.
30. GOLUB G., VAN LOAN C., Matrix Computation, 3rd Ed., The Johns Hopkins Press Ltd, London, 1996.
31. JAI M., BOU-SAÏD B., "A comparison of homegenization and averaging techniques for the treatement of roughness in slip-flow-modified Reynolds equation", Journal of Tribology, vol. 124, pp. 327-335, 2002.
32. KANE M., Contribution à l'étude de l'influence de la rugosité et des effets non-Newtoniens dans les contacts sévères lubrifiés, Doctorate Thesis, INSA of Lyon, France, 2003.
33. KANE M., BOU-SAÏD B., "Comparison of homogenization and direct techniques for the treatement of roughness in incompressible lubrication", Journal of Tribology, vol. 126, pp. 733-737, 2004.
34. LUNDE L., TONDER K., "Pressure and shear flow in a rough hydrodynamic bearing, flow factor calculation", Journal of Tribology, vol. 119, pp. 549-555, 1997.
35. PATIR N., CHENG H.S., "An average flow model for determining effects of threedimensional roughness on partial hydrodynamic lubrication", Journal of Lubrication Technology, vol. 100, pp. 12-17, 1978.
36. PATIR N., CHENG H.S., "Application of average flow model to lubrication between rough sliding surfaces", Journal of Lubrication Technology, vol. 101, pp. 220-230, 1979.
37. PEKLENIK J., "New developments in surface characterization and measurement by means of random process analysis", Proceeding of the Institution of Mechanical Engineers, Part K: Journal of Multi-Body Dynamics, vol. 182, p. 108, 1967.
38. PERSSON L.-E., PERSSON L., SVANSTEDT N., et al., The Homogenization Method: An Introduction, Studentlitteratur, Lund, 1993.
39. VENNER C.H., LUBRECHT A.A., "Multilevel methods in lubrication", Tribology Series, vol. 37, Elsevier, Amsterdam, 2000.
40. WANG Q.J., ZHU D., CHENG H.S., et al., "Mixed lubrication analyses by a macro-micro approach and a full-scale mixed EHL model", Journal of Tribology, vol. 126, pp. 81-91, 2004.
41. WANG Y., WANG Q.J., LIN C., "A mixed-EHL analysis of effects of misalignments and elastic deformations on the performance of a coupled journal-thrust bearing system", Tribology International, vol. 39, pp. 281-289, 2006.
42. BONNEAU D., FATU A., SOUCHET D., Thermo-hydrodynamic Lubrication in Hydrodynamic Bear and John Wiley & Sons, New York, 2014.
43. DA SILVA BOTELHO T., Contribution à l'étude du comportement élastoplastique de surfaces métalliques rugueuses revêtues d'un métal de faible dureté, PhD Thesis, University of Poitiers, France, 2004.
44. DRAGOMIR-FATU R., Etude et modélisation de la lubrification mixte et des modes d'avaries associés dans les paliers moteur, PhD Thesis, University of Poitiers, France, 2009.
45. GOLUB G., VAN LOAN C., Matrix Computation, 3rd Ed., The Johns Hopkins Press Ltd, London, 1996.
46. GREENWOOD J.A., WILIAMSON J.B.P., "Contact of nominally flat surfaces", Proceedings of the Royal Society, vol. A295, pp. 300-318, 1966.
47. JOHNSON K.L., Contact Mechanics, Cambridge University Press, Cambridge, 1985.
48. LEROY J.M., Modélisation thermoélastique des revêtements de surface utilisés dans les contacts non lubrifiés, PhD Thesis, INSA of Lyon, 1989.
49. LIU S., WANG Q., LIU G., "A versatile method of discrete convolution and fft (dc-fft) for contact analyses", Wear, vol. 243(1-2), pp. 101-111, 2000.
50. MCCOOL J.I., "Comparison of models for the contact of rough surfaces", Wear, vol. 107, pp. 37-60, 1986.
51. NAYAK P.R., "Random process model of rough surfaces", Journal of Lubrication Technology, vol. 93, pp. 398-407, 1971.
52. PROGRI R., ROBBE-VALLOIRE F., PAFFONI B., et al., "Influence de la présence d'une couche d'argent sur le frottement d'un contact fonctionnant en régime de lubrification mixte", Les progrès en tribologie, Nancy, France, 2003.
53. RICHE I., Etude du revêtement des coussinets de paliers de moteurs thermiques. Modélisation thermoélastohydrodynamique d'une situation de lubrification localement sévère, PhD Thesis, University of Poitiers, France, 2001.
54. ROBBE-VALLOIRE F., "Statistical analysis of asperities on a rough surface", Wear, vol. 249, pp. 401-408, 2001.
55. ROBBE-VALLOIRE F., PAFFONI B., PROGRI R., "Load transmission by elastic, elasto-plastic or fully plastic deformation of rough interface asperities", Mechanics of Materials, vol. 33, pp. 617-633, 2001.
56. SAHLIN F., LARSSON R., ALMQVIST A., et al., "A mixed lubrication model incorporating measured surface topography: part I-theory of flow factors", Proceedings of the Institution of Mechanical Engineering, Part J, Journal of Engineering Tribology, vol. 224, pp. 335-351, 2010.
57. STANLEY H.M., KATO T., "Fft-based method for rough surface contact", Journal of Tribology, vol. 119, pp. 481-485, 1997.
58. WANG W.-Z., WANG H., LIU Y.-C., et al., "A comparative study of the methods for calculation of surface elastic deformation", Proceedings of the Institution of Mechanical Engineering, Part J: Journal of Engineering Tribology, vol. 217-222, pp. 145-154, 2003.
59. ARCHARD, J.F., "Contact and rubbing of flat surfaces", Journal of Applied Physics, vol. 24, pp. 981-988, 1953.
60. ARCHARD J.F., "Surface topography and tribology", Tribology International, vol. 7, pp. 213-220, 1974.
61. DRAGOMIR-FATU R., Etude et modélisation de la lubrification mixte et des modes d'avaries associés dans les paliers moteur, PhD Thesis, University of Poitiers, France, 2009.
62. LIGIER J.L., GOJON R., "Prédiction de l'usure et du grippage d'un palier de moteur diesel", SIA, 93065, 1993.
63. LIGIER J.L., Avarie en lubrification, Technip, Paris, 2004.
64. PASCOVICI M.D., CICONE T., Elemente de Tribologie, Bren, Bucarest, 2001.
65. RABINOWICZ E., "The determination of the compatibility of metals through static friction tests", ASLE Transactions, vol. 14, pp. 198-203, 1971.
66. SREENATH A.V., RAMAN N., "Running-in wear of a compression ignition engine:factors influencing the conformance between cylinder line and piston rings", Wear, vol. 38, pp. 271-289, 1976.
67. STOUT K.J., KING T.G., WHITEHOUSE D.J., "Analytical techniques in surface topography and their application to a running-in experiment", Wear, vol. 43, pp. 99-115, 1977.