Internal Combustion Engine Bearings Lubrication in Hydrodynamic Bearings

Internal Combustion Engine Bearings Lubrication in Hydrodynamic Bearings

Volumn 9781848216846, Issue , 2014, Pages 1-225

  Bonneau, Dominique ^a   Fatu, Aurelian ^a   Souchet, Dominique ^a  

^a NONE

Author keywords

[No Author keywords available]

Indexed keywords

COMBUSTION; HYDRODYNAMICS; INTERNAL COMBUSTION ENGINES;

HYDRODYNAMIC BEARINGS; NUMERICAL PREDICTION MODELS;

LUBRICATION;

EID: 84926245216     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9781119005025     Document Type: Book

References (80)

1. BONNEAU D., FATU A., SOUCHET D., Hydrodynamic Bearings, ISTE, London and John Wiley & Sons, New York, 2014.
2. BONNEAU D., FATU A., SOUCHET D., Mixed Lubrication in Hydrodynamic Bearings, ISTE, London and John Wiley & Sons, New York, 2014.
3. BONNEAU D., FATU A., SOUCHET D., Thermo-hydrodynamic Lubrication in Hydrodynamic Bearings, ISTE, London and John Wiley & Sons, New York, 2014.
4. BONNEAU D., FATU A., SOUCHET D., Thermo-hydrodynamic Lubrication in Hydrodynamic Bearings, ISTE, London and John Wiley & Sons, New York, 2014.
5. GAMBIN F., Etude de la consommation d'huile par évaporation dans la chambre de combustion des moteurs thermiques. Développement d'un banc d'essais de prélèvement de gaz, PhD Thesis, University of Poitiers, France, 2006.
6. KERIBAR R., DURSUNKAYA Z., "A comprehensive model of piston skirt lubrication", SAE Paper 920483, pp. 81-94, 1992.
7. MANSOURI S.H., WONG V.W., "Effects of piston design parameters on piston secondary motion and skirt-liner friction", Journal of Engineering Technology, vol. 219, pp. 435-449, 2005.
8. SVOBODA B., Mécanique des moteurs alternatifs, Technip, Paris, 1984.
9. TIAN T., WONG V.W., HEYWOODN J.B., "A piston ring-pack film thickness and friction model for multigrade oils and rough surfaces", SAE Paper 962032, pp. 27-39, 1996.
10. ALEXANDRE A., TOMASELLI L., "Analyse des transferts énergétiques dans les moteurs automobiles", BM 2900 - 1, Techniques de l'Ingénieur, 2, Paris, 2004.
11. BONNEAU D., GUINES D., FRÊNE J., et al., "EHD analysis, including structural inertia effects and a mass-conserving cavitation model", Journal of Tribology, vol. 117, pp. 540-547, 1995.
12. BONNEAU D., HAJJAM M., "Modélisation de la rupture et de la formation des films lubrifiants dans les contacts élastohydrodynamiques", Revue europeenne des elements finis, vol. 10, nos. 6-7, pp. 679-704, 2001.
13. BONNEAU D., FATU A., SOUCHET D., Thermo-hydrodynamic Lubrication in Hydrodynamic Bearings, ISTE, London and John Wiley & Sons, New York, 2014.
14. BONNEAU D., FATU A., SOUCHET D., Hydrodynamic Bearings, ISTE, London and John Wiley & Sons, New York, 2014.
15. BONNEAU D., FATU A., SOUCHET D., Mixed Lubrication in Hydrodynamic Bearings, ISTE, London and John Wiley & Sons, New York, 2014.
16. BOOKER J.F., BOEDO S., "Finite element analysis of elastic engine bearing lubrication: theory", Revue européenne des éléments finis, vol. 10, pp. 705-724, 2001.
17. BOOKER J.F., BOEDO S., BONNEAU D., "Conformal elastohydro-dynamic lubrication analysis for engine bearing design: a brief review", Proceedings of the Institution of Mechanical Engineers, part C, vol. 224, pp. 2648-2653, 2010.
18. DRAGOMIR-FATU R., Etude et modélisation de la lubrification mixte et des modes d'avaries associés dans les paliers moteur, PhD Thesis, University of Poitiers, France, 2009.
19. FATU A., HAJJAM M., BONNEAU D., "EHD behavior of non-Newtonian dynamically loaded connecting rod bearings", Proceedings of the first International Conference on Finite Element for Process, LUXFEM, pp. 150-162, 2003.
20. FATU A., HAJJAM M., BONNEAU D., "Thermo-elastohydrodynamic behaviour of non-Newtonian dynamically loaded journal bearings", Proceedings of the 12th Conference on EHD Lubrification and Traction, Romania, 8-9 October 2004.
21. FATU A., Modélisation numérique et expérimentale de la lubrification de paliers de moteur soumis à des conditions sévères de fonctionnement, PhD Thesis, University of Poitiers, France, 2005.
22. FATU A., HAJJAM M., BONNEAU D., "Analysis of non-Newtonian and piezoviscous effects in dynamically loaded connecting-rod bearings", Journal of Engineering Tribology, vol. 219, pp. 209-224, 2005.
23. FATU A., HAJJAM M., BONNEAU D., "A fast thermo-elasto-hydrodynamic model for dynamically loaded journal bearing behavior analysis", Revue européenne des éléments finis, vol. 14, pp. 237-253, 2005.
24. FATU A., HAJJAM M., BONNEAU D., "A new model of thermo-elasto-hydrodynamic lubrication in dynamically loaded journal bearings", Journal of Tribology, vol. 128, pp. 85-95, 2006.
25. FATU A., BONNEAU D., "EHD lubrication of multi-body common-pin con rod big end bearing system", STLE/ASME STLE/ASME International Joint Tribology Conference, San Diego, CA, 22-24 October 2007.
26. FATU A., HAJJAM M., BONNEAU D., "Wall slip in EHD journal bearings", STLE/ASME Int. Joint Tribology Conf., Miami, FL, 20-22 October 2008.
27. FATU A., BONNEAU D., "Wear prediction models for automotive bearings", 7th EDF/LMS Poitiers Workshop, Poitiers, France, 2 October 2008.
28. FATU A., HAJJAM M., BONNEAU D., "Dynamically loaded low friction bearings based on wall slip boundary condition", 7th EDF/LMS Poitiers Workshop, Poitiers, France, 2 October 2008.
29. FATU A., RICHE I., BONNEAU D., "A finite-element local mesh refinement model for treating mixed-lubrication in con-rodbearings", International Journal of Surface Science and Engineering, vol. 4, pp. 155-165, 2010.
30. FRANCISCO A., FATU A., BONNEAU D., "Using design of experiments to analyze the connecting rod big-end bearing behavior", Journal of Tribology, vol. 131, p. 011101, 2009.
31. FRÊNE J., BONNEAU D., "Journal bearing subjected to dynamic loading: the connecting rod-bearing case", Proceedings of the International Conference on Lubrication Technics, Istanbul, Turkey, pp. 1-31, 1999.
32. GECIM B.A., "Non-Newtonian effects of multigrade oils on journal bearing performance", STLE Tribology Transaction, vol. 33, pp. 384-394, 1990.
33. GRENTE C., LIGIER J.-L., TOPLOSKY J., et al., "The consequence of performance increases of automotive engines on the modelisation of main and connecting-rod bearings", Proceedings of the 27th Leeds-Lyon Symposium: Thinning Films and Tribological Interfaces, Elsevier, pp. 839-850, 2001.
34. GUINES D., La lubrification des liaisons compliantes: modélisation et algorithmes, PhD Thesis, University of Poitiers, France, 1994.
35. HOANG L.V., Modélisation expérimentale de la lubrification thermoélastohydrodynamique des paliers de tête de bielle. Comparaison entre les résultats théoriques et expérimentaux, PhD Thesis, University of Poitiers, France, 2002.
36. HOANG L.V., SOUCHET D., BONNEAU D., "Connecting-rod big end bearing thermo-elastohydrodynamic lubrication (TEHD) - comparison between theory and experiment", International Journal of Applied Mechanics and Engineering, vol. 7, pp. 231-236, 2002.
37. HOANG L.V., SOUCHET D., BONNEAU D., "Comparison between theory and experiment on behavior of connecting-rod big end bearing under dynamic loading", 11th World Congress in Mechanism and Machine Science, Tianjin, China,18-21 August 2003.
38. HOANG L.V., SOUCHET D., BONNEAU D., "Thermo-elastohydrodynamic lubrication for connecting-rod big end bearing used in the machine of automobile under dynamic loading", International Conference on Automotive Technology for Vietnam, Hanoi, Vietnam, 22-24 October 2005.
39. HUETZ J., PETIT J-P., "Notions de transfert thermique par convection", A 1540 - 1, Technique de l'Ingénieur, traité Génie énergétique, Paris, 1990.
40. MICHAUD P., Modélisation thermo-élastohydrodynamique tridimensionnelle des paliers de moteurs, Mise en place d'un banc d'essais pour paliers sous conditions sévères, PhD Thesis, University of Poitiers, France, 2004.
41. MICHAUD P., FATU A., VILLECHAISE B., "Experimental device for studying real connecting-rod bearings functioning in severe conditions", Journal of Tribology, vol. 129, pp. 647-654, 2007.
42. MICHAUD P., SOUCHET D., BONNEAU D., "Thermo hydrodynamic lubrication analysis for a dynamically loaded journal bearing", Journal of Engineering Tribology, vol. 221, pp. 49-61, 2007.
43. MOREAU H., Mesures des épaisseurs du film d'huile dans les paliers de moteur automobile et comparaisons avec les résultats théoriques, PhD Thesis, University of Poitiers, France, 2001.
44. MOREAU H., MASPEYROT P., BONNEAU D., et al., "Comparison between experimental film thickness measurements and elastohydrodynamic analysis in a connecting-rod bearing", Journal of Engineering Tribology, vol. 216, pp. 195-208, 2002.
45. PIFFETEAU S., Modélisation du comportement thermo-élastohydro-dynamique d'un palier de tête de bielle soumis à un chargement dynamique, PhD Thesis, University of Poitiers, France, 1999.
46. PIFFETEAU S., SOUCHET D., BONNEAU D., "Influence of thermal and elastic deformations on connecting-rod big end bearing lubrication under dynamic loading", Journal of Tribology, vol. 122, pp. 181-191, 2000.
47. SOUCHET D., PIFFETEAU S., BONNEAU D., "Influences des conditions aux limites thermiques sur le comportement d'un palier de tête de bielle", Proceedings of the 10th Conference on EHD Lubrification and Traction, VAREHD 10, University of Suceava, Romania, 2000.
48. SOUCHET D., PIFFETEAU S., "Approche par la M.E.F. de la lubrification thermoélastohydrodynamique des paliers de tête de bielle", Revue européenne des éléments finis, vol. 10, pp. 815-847, 2001.
49. SOUCHET D., PIFFETEAU S., BONNEAU D., "Lubrification des paliers de tête de bielle de moteurs thermiques. Modélisation thermohydrodynamique bidimensionnelle", 19th Science and Technology Conference, Hanoi, Vietnam, 2001.
50. SOUCHET D., HOANG L.V., BONNEAU D., "Thermo-elastohydrodynamic lubrication for connecting-rod big end bearing under dynamic loading", Journal of Engineering Tribology, vol. 218, pp. 451-464, 2004.
51. STEFANI F., FEM analysis of the lubrication in connecting rod engine bearings: the influence of structural behaviour on EHD performance, PhD Thesis, University of Genoa, Italy, 2003.
52. TRAN T.T.H., Etude expérimentale et modélisation des interactions lubrifiées ou non entre les différents corps d'un palier de tête de bielle, PhD Thesis, University of Poitiers, France, 2006.
53. ZIENKIEWICZ O.C., TAYLOR R.L., The Finite Element Method, vol. 2, Solid Mechanics, 5th ed., McGraw Hill, 2000.
54. BONNEAU D., FATU A., SOUCHET D., Hydrodynamic Bearings ISTE, London and John Wiley & Sons, New York, 2014.
55. BONNEAU D., FATU A., SOUCHET D., Mixed Lubrication Hydrodynamic Bearings, ISTE, London and John Wiley & Sons, New York, 2014.
56. OPTASANU V., Modélisation expérimentale et numérique de la lubrification des paliers compliants sous chargement dynamique, Doctorate Thesis, University of Poitiers, France, 2000.
57. OPTASANU V., BONNEAU D., "Finite element mass-conserving cavitation algorithm in pure-squeeze motion, Validation/application to a connecting-rod small-end bearing", Journal of Tribology, vol. 122, pp. 162-169, 2000.
58. OPTASANU V., BONNEAU D., "EHD lubrication of connecting-rod small end bearings using mass-conserving cavitation model", Proceedings of 10th World Congress on the Theory of Machines and Mechanisms, Oulu University Press, Finland, pp. 2496-2500, 1999.
59. SPURIA M., BONNEAU D., LE BARATOUX Y., et al., "A dynamic model for an internal combustion engine full floating piston pin in lubricated conditions", Proceedings of 17th Congress of Italian Association of Theoretical and Applied Mechanics, Florence, Italy, 2005.
60. SPURIA M., Modellazione numerica delle condizioni di lubrificazione dello spinotto in un motore ad alte prestazioni, Doctorate Research Thesis in Car Design and Construction, University of Florence, Italy, 2007.
61. ZIENKIEWICZ O.C., TAYLOR R.L., The Finite Element Method: The Basis, 5th ed., Butterworth-Heinemann, Oxford, vol. 1, 2000.
62. BONNEAU D., CHOMAT-DELALEX A.M., GARNIER T., et al., "Influence of the engine block/crankshaft design on the 3D EHD lubrication of a four cylinder inline automotive engine", Proceedings of the 10th World Congress on Theory of Machines and Mechanisms, University of Oulu, Finland, pp. 2488-2495, 1999.
63. BONNEAU D., CHOMAT-DELALEX A.M., GARNIER T., et al., "3D EHD lubrication optimised design of a four cylinder in line automotive engine crankshaft", Proceedings of the 26th Leeds-Lyon Symposium., Thinning Films and Tribological Interfaces, D. Dowson Editor, Elsevier (ed.), Amsterdam, pp. 391-398, 2000.
64. BONNEAU D., FATU A., SOUCHET D., Mixed Lubrication Hydrodynamic Bearings, ISTE, London and John Wiley & Sons, New York, 2014.
65. BONNEAU D., FATU A., SOUCHET D., Hydrodynamic Bearings, ISTE, London and John Wiley & Sons, New York, 2014.
66. BONNEAU D., FATU A., SOUCHET D., Thermo-hydrodynamic Lubrication in Hydrodynamic Bearings, ISTE, London, and John Wiley & Sons, New York, 2014.
67. CHOMAT-DELALEX A.M., BONNEAU D., "Modélisation par la méthode des éléments finis de la lubrification EHD des paliers de vilebrequin des moteurs thermiques", Revue européenne des éléments finis, vol. 10, pp. 791-814, 2001.
68. FATU A., Modélisation numérique et expérimentale de la lubrification de paliers de moteur soumis à des conditions sévères de fonctionnement, Doctorate Thesis, University of Poitiers, France, 2005.
69. FATU A., HAJJAM M., BONNEAU D., "An EHD model to predict the interdependent behavior of two dynamically loaded hybrid journal bearings", Journal of Tribology, vol. 127, pp. 416-424, France, 2005.
70. GARNIER T., Etude élastohydrodynamique de la liaison carter- vilebrequin d'un moteur thermique à quatre cylindres en ligne, Doctorate Thesis, University of Poitiers, 1997.
71. GARNIER T., BONNEAU D., GRENTE C., "Three-dimensional EHD behavior of the engine block/crankshaft assembly for a four-cylinder inline automotive engine", Journal of Tribology, vol. 121, pp. 721-730, 1999.
72. HODGETTS, The vibrations of a crankshaft, PhD Thesis, Cranfield Institute of Technology, Bedford, UK, 1974.
73. MOREAU H., Mesures des épaisseurs du film d'huile dans les paliers de moteur automobile et comparaisons avec les résultats théoriques, Doctorate Thesis, University of Poitiers, France, 2001.
74. MOREAU H., MASPEYROT P., CHOMAT-DELALEX A.M., et al., "Dynamic behavior of elastic engine bearings - theory and experiments", Journal of Engineering Tribology, vol. 216, pp. 179-193, 2002.
75. BONNEAU D., FATU A., SOUCHET D., Mixed Lubrication in Hydrodynamic Bearings, ISTE, London and John Wiley & Sons, New York, 2014.
76. BONNEAU D., FATU A., SOUCHET D., Thermo-hydrodynamic Lubrication in Hydrodynamic Bearings, ISTE, London and John Wiley & Sons, New York, 2014.
77. FRANCISCO A., FATU A., BONNEAU D., "Using design of experiments to analyze the connecting rod big-end bearing behavior", ASME, Journal of Tribology, vol. 131, pp. 011101-011113, 2009.
78. GOUPY J., "Plans d'expériences", Techniques de l'ingénieur, PE 230, p. 26, 1997.
79. LAVIE T., Optimisation de la Lubrification des Paliers de Tête de Bielle: Démarche Méthodologique, Doctorate thesis, University of Poitiers, France, 2012.
80. LIGIER J.L., DUTFOY L., "Modeling and prediction of a simplified seizure mechanism occurring in conrod bearings", Mécanique & Industries, vol. 12, pp. 265-273, 2011.