A novel chemical looping combustion (CLC)-assisted catalytic naphtha reforming process for simultaneous carbon dioxide capture and hydrogen production enhancement

Energy and Fuels

Volumn 29, Issue 3, 2015, Pages 2022-2033

  Rimaz, Sajjad ^a   Iranshahi, Davood ^a  

^a AMIRKABIR UNIVERSITY OF TECHNOLOGY   (Iran)

Author keywords

[No Author keywords available]

Indexed keywords

ALUMINA; ALUMINUM OXIDE; CARBON DIOXIDE; CHEMICAL ANALYSIS; COMBUSTION; HYDROGEN PRODUCTION; NAPHTHAS; NICKEL COMPOUNDS; OXYGEN;

AL2O3 PARTICLES; CARBON DIOXIDE CAPTURE; CHEMICAL-LOOPING COMBUSTION; HIGH REACTIVITY; HYDROGEN PRODUCTION RATE; NAPHTHA REFORMING; PRODUCTION ENHANCEMENT; PURE CARBON DIOXIDE;

CATALYTIC REFORMING;

EID: 84925139870     PISSN: 08870624     EISSN: 15205029     Source Type: Journal    
DOI: 10.1021/ef502421k     Document Type: Article

References (60)

1. 3 naphtha reforming catalysts Applied Catalysis A: General 2009, 370 (1) 34-41
2. Stijepovic, M. Z.; Vojvodic-Ostojic, A.; Milenkovic, I.; Linke, P. Development of a kinetic model for catalytic reforming of naphtha and parameter estimation using industrial plant data Energy Fuels 2009, 23 (2) 979-983
3. HOU, W.; SU, H.; HU, Y.; Chu, J. Modeling, simulation and optimization of a whole industrial catalytic naphtha reforming process on Aspen Plus platform Chinese Journal of Chemical Engineering 2006, 14 (5) 584-591
4. Smith, R. Kinetic analysis of naphtha reforming with platinum catalyst Chem. Eng. Prog. 1959, 55 (6) 76-80
5. Hou, W.; Su, H.; Hu, Y.; Chu, J. Lumped kinetics model and its on-line application to commercial catalytic naphtha reforming process JOURNAL OF CHEMICAL INDUSTRY AND ENGINEERING-CHINA 2006, 57 (7) 1605
6. Ancheyta-Juárez, J.; Villafuerte-Macías, E. Kinetic modeling of naphtha catalytic reforming reactions Energy Fuels 2000, 14 (5) 1032-1037
7. Sotelo-Boyás, R.; Froment, G. F. Fundamental kinetic modeling of catalytic reforming Ind. Eng. Chem. Res. 2008, 48 (3) 1107-1119
8. Hu, S.; Zhu, X. Molecular modeling and optimization for catalytic reforming Chem. Eng. Commun. 2004, 191 (4) 500-512
9. Hongjun, Z.; Mingliang, S.; Huixin, W.; Zeji, L.; Hongbo, J. Modeling and simulation of moving bed reactor for catalytic naphtha reforming Petroleum science and technology 2010, 28 (7) 667-676
10. Ancheyta-Juarez, J.; Villafuerte-Macias, E.; Diaz-Garcia, L.; Gonzalez-Arredondo, E. Modeling and simulation of four catalytic reactors in series for naphtha reforming Energy Fuels 2001, 15 (4) 887-893
11. Mazzieri, V. A.; Pieck, C. L.; Vera, C. R.; Yori, J. C.; Grau, J. M. Analysis of coke deposition and study of the variables of regeneration and rejuvenation of naphtha reforming trimetallic catalysts Catal. Today 2008, 133, 870-878
12. Sugimoto, M.; Murakawa, T.; Hirano, T.; Ohashi, H. Novel regeneration method of Pt/KL zeolite catalyst for light naphtha reforming Applied Catalysis A: General 1993, 95 (2) 257-268
13. Galiasso Tailleur, R.; Davila, Y. Optimal hydrogen production through revamping a naphtha-reforming unit: catalyst deactivation Energy Fuels 2008, 22 (5) 2892-2901
14. Tailleur, R. G. Cross-Flow Naphtha Reforming in Stacked-Bed Radial Reactors with Continuous Solid Circulation: Catalyst Deactivation and Solid Circulation between Reactors Energy Fuels 2012, 26 (11) 6938-6959
15. 2 capture in existing power plants Energy Conversion and Management 2008, 49 (10) 2809-2814
16. 2 from Combustion Processes Chem. Eng. Res. Des. 1999, 77 (1) 62-68
17. Abanades, J. C.; Anthony, E. J.; Wang, J.; Oakey, J. E. Fluidized bed combustion systems integrating CO2 capture with CaO Environ. Sci. Technol. 2005, 39 (8) 2861-2866
18. Abanades, J. C.; Rubin, E. S.; Anthony, E. J. Sorbent cost and performance in CO2 capture systems Ind. Eng. Chem. Res. 2004, 43 (13) 3462-3466
19. 2 capture from power plants: Part I. A parametric study of the technical performance based on monoethanolamine International Journal of Greenhouse gas control 2007, 1 (1) 37-46
20. 2 capture unit using single-and blended-amines into supercritical coal-fired power plants: Implications for emission and energy management International Journal of Greenhouse Gas Control 2007, 1 (2) 143-150
21. 2 amine scrubbing International Journal of Greenhouse Gas Control 2008, 2 (4) 563-570
22. Zeman, F. Energy and material balance of CO2 capture from ambient air Environ. Sci. Technol. 2007, 41 (21) 7558-7563
23. 2 capture systems Energy Procedia 2011, 4, 1043-1050
24. Xiao, P.; Wilson, S.; Xiao, G.; Singh, R.; Webley, P. Novel adsorption processes for carbon dioxide capture within a IGCC process Energy Procedia 2009, 1 (1) 631-638
25. 2 capture from pre-combustion processes-Strategies for membrane gas separation International Journal of Greenhouse Gas Control 2010, 4 (5) 739-755
26. Simpson, A. P.; Simon, A. Second law comparison of oxy-fuel combustion and post-combustion carbon dioxide separation Energy Conversion and Management 2007, 48 (11) 3034-3045
27. 2 capture Energy Conversion and Management 2009, 50 (3) 510-521
28. Abad, A.; Adánez, J.; García-Labiano, F.; de Diego, L. F.; Gayán, P.; Celaya, J. Mapping of the range of operational conditions for Cu-, Fe-, and Ni-based oxygen carriers in chemical-looping combustion Chem. Eng. Sci. 2007, 62 (1) 533-549
29. Richter, H. J.; Knoche, K. F. In Reversibility of combustion processes, ACS Symposium series, 1983; Oxford University Press: 1983; pp 71-85.
30. Chiesa, P.; Lozza, G.; Malandrino, A.; Romano, M.; Piccolo, V. Three-reactors chemical looping process for hydrogen production Int. J. Hydrogen Energy 2008, 33 (9) 2233-2245
31. Edrisi, A.; Mansoori, Z.; Dabir, B. Using three chemical looping reactors in ammonia production process-A novel plant configuration for a green production Int. J. Hydrogen Energy 2014, 39 (16) 8271-8282
32. 2 separation; application of chemical-looping combustion Chem. Eng. Sci. 2001, 56 (10) 3101-3113
33. Jerndal, E.; Mattisson, T.; Lyngfelt, A. Thermal analysis of chemical-looping combustion Chem. Eng. Res. Des. 2006, 84 (9) 795-806
34. Cho, P.; Mattisson, T.; Lyngfelt, A. Comparison of iron-, nickel-, copper-and manganese-based oxygen carriers for chemical-looping combustion Fuel 2004, 83 (9) 1215-1225
35. Leion, H.; Mattisson, T.; Lyngfelt, A. Use of ores and industrial products as oxygen carriers in chemical-looping combustion Energy Fuels 2009, 23 (4) 2307-2315
36. Cho, P.; Mattisson, T.; Lyngfelt, A. Carbon formation on nickel and iron oxide-containing oxygen carriers for chemical-looping combustion Ind. Eng. Chem. Res. 2005, 44 (4) 668-676
37. Adanez, J.; Abad, A.; Garcia-Labiano, F.; Gayan, P.; de Diego, L. F. Progress in chemical-looping combustion and reforming technologies Prog. Energy Combust. Sci. 2012, 38 (2) 215-282
38. Kang, K.-S.; Kim, C.-H.; Bae, K.-K.; Cho, W.-C.; Kim, S.-H.; Park, C.-S. Oxygen-carrier selection and thermal analysis of the chemical-looping process for hydrogen production Int. J. Hydrogen Energy 2010, 35 (22) 12246-12254
39. de Diego, L. F.; García-Labiano, F.; Adánez, J.; Gayán, P.; Abad, A.; Corbella, B. M.; María Palacios, J. Development of Cu-based oxygen carriers for chemical-looping combustion Fuel 2004, 83 (13) 1749-1757
40. Ishida, M.; Jin, H. A novel chemical-looping combustor without NOx formation Ind. Eng. Chem. Res. 1996, 35 (7) 2469-2472
41. Ishida, M.; Jin, H. A novel combustor based on chemical-looping reactions and its reaction kinetics J. Chem. Eng. Jpn. 1994, 27 (3) 296-301
42. Karimi, M.; Rahimpour, M.; Rafiei, R.; Jafari, M.; Iranshahi, D.; Shariati, A. Reducing environmental problems and increasing saving energy by proposing new configuration for moving bed thermally coupled reactors Journal of Natural Gas Science and Engineering 2014, 17, 136-150
43. Jafari, M.; Rafiei, R.; Amiri, S.; Karimi, M.; Iranshahi, D.; Rahimpour, M. R.; Mahdiyar, H. Combining continuous catalytic regenerative naphtha reformer with thermally coupled concept for improving the process yield Int. J. Hydrogen Energy 2013, 38 (25) 10327-10344
44. Iranshahi, D.; Rafiei, R.; Jafari, M.; Amiri, S.; Karimi, M.; Rahimpour, M. R. Applying new kinetic and deactivation models in simulation of a novel thermally coupled reactor in continuous catalytic regenerative naphtha process Chemical Engineering Journal 2013, 229, 153-176
45. Amirabadi, S.; Kabiri, S.; Vakili, R.; Iranshahi, D.; Rahimpour, M. R. Differential evolution strategy for optimization of hydrogen production via coupling of methylcyclohexane dehydrogenation reaction and methanol synthesis process in a thermally coupled double membrane reactor Ind. Eng. Chem. Res. 2013, 52 (4) 1508-1522
46. George, J. A.; Abdullah, M. A. Catalytic naphtha reforming. Marcel Dekker, New York, 2004.
47. Rahimpour, M.; Vakili, R.; Pourazadi, E.; Iranshahi, D.; Paymooni, K. A novel integrated, thermally coupled fluidized bed configuration for catalytic naphtha reforming to enhance aromatic and hydrogen productions in refineries Int. J. Hydrogen Energy 2011, 36 (4) 2979-2991
48. Rahimpour, M. R.; Iranshahi, D.; Pourazadi, E.; Paymooni, K.; Bahmanpour, A. M. The aromatic enhancement in the axial-flow spherical packed-bed membrane naphtha reformers in the presence of catalyst deactivation AIChE J. 2011, 57 (11) 3182-3198
49. Iranshahi, D.; Pourazadi, E.; Bahmanpour, A.; Rahimpour, M. A comparison of two different flow types on performance of a thermally coupled recuperative reactor containing naphtha reforming process and hydrogenation of nitrobenzene Int. J. Hydrogen Energy 2011, 36 (5) 3483-3495
50. Dueso, C.; Ortiz, M.; Abad, A.; García-Labiano, F.; de Diego, L. F.; Gayán, P.; Adánez, J. Reduction and oxidation kinetics of nickel-based oxygen-carriers for chemical-looping combustion and chemical-looping reforming Chemical Engineering Journal 2012, 188, 142-154
51. Adánez, J.; Dueso, C.; de Diego, L. F.; García-Labiano, F.; Gayán, P.; Abad, A. Methane combustion in a 500 Wth chemical-looping combustion system using an impregnated Ni-based oxygen carrier Energy Fuels 2008, 23 (1) 130-142
52. Rase, H. F.; Holmes, J. R. Chemical reactor design for process plants. Wiley: New York, 1977; Vol. 2.
53. Reforming, C. N.; Antos, G. A.; Aitani, A. M.; Parera, J. M., Eds. In Marcel Dekker: New York, 1995.
54. Liang, K.-m.; Guo, H.-y.; Pan, S.-w. A study on naphtha catalytic reforming reactor simulation and analysis Journal of Zhejiang University. Science. B 2005, 6 (6) 590
55. Bommannan, D.; Srivastava, R.; Saraf, D. Modelling of catalytic naphtha reformers Canadian Journal of Chemical Engineering 1989, 67 (3) 405-411
56. Van Ness, H.; Smith, J. M.; Abbott, M. M. Introduction to chemical engineering thermodynamics. McGraw-Hill, NewYork, 2001.
57. Perry, R.; Green, D.; Maloney, J. H., 1997, Perry's Chemical Engineers' Handbook. McGraw-Hill, 7 th ed., ISBN 70498415, 2-7.
58. Iranshahi, D.; Rahimpour, M.; Asgari, A. A novel dynamic radial-flow, spherical-bed reactor concept for naphtha reforming in the presence of catalyst deactivation Int. J. Hydrogen Energy 2010, 35 (12) 6261-6275
59. Iranshahi, D.; Pourazadi, E.; Paymooni, K.; Rahimpour, M. R. A novel dynamic membrane reactor concept with radial-flow pattern for reacting material and axial-flow pattern for sweeping gas in catalytic naphtha reformers AIChE J. 2012, 58 (4) 1230-1247
60. Mattisson, T.; Johansson, M.; Lyngfelt, A. The use of NiO as an oxygen carrier in chemical-looping combustion Fuel 2006, 85 (5) 736-747