A new model for the relationship between vibration characteristics caused by the time-varying contact stiffness of a deep groove ball bearing and defect sizes

Journal of Tribology

Volumn 137, Issue 3, 2015, Pages

  Liu, Jing ^a   Shao, Yimin ^a   Zhu, W D ^b  

^a CHONGQING UNIVERSITY   (China)

^b UNIVERSITY OF MARYLAND BALTIMORE COUNTY   (United States)

Author keywords

Deep groove ball bearing; Dynamic response; Localized surface defect; Time varying contact stiffness

Indexed keywords

BALL BEARINGS; DYNAMIC RESPONSE; STIFFNESS; SURFACE DEFECTS; VIBRATION ANALYSIS;

CONTACT STIFFNESS; DEFECT DEPTH; DEFECT MODEL; EXPERIMENTAL INVESTIGATIONS; FORCE DEFLECTION; LINE CONTACT; TIME VARYING; VIBRATION CHARACTERISTICS;

DEEP GROOVE BALL BEARINGS;

EID: 84924954742     PISSN: 07424787     EISSN: 15288897     Source Type: Journal    
DOI: 10.1115/1.4029461     Document Type: Article

References (60)

1. Tandon, N., and Choudhury, A., 2005, "A Review of Vibration and Acoustic Measurement Methods for the Detection of Defects in Rolling Element Bearings," Tribol. Int., 32(8), pp. 469-480.
2. Wardle, F. P., 1988, "Vibration Forces Produced by Waviness of the Rolling Surfaces of Thrust Loaded Ball Bearings Part 1: Theory," Proc. Inst. Mech. Eng., Part C, 202(5), pp. 305-312.
3. Lynagh, N., Rahnejat, H., Ebrahimi, M., and Aini, R., 2000, "A Bearing Induced Vibration in Precision High Speed Routing Spindles," Int. J. Mach. Manuf., 40(4), pp. 561-577.
4. Patil, M. S., Mathew, J., and RajendraKumar, P. K., 2008, "Bearing Signature Analysis as a Medium for Fault Detection: A Review," ASME J. Tribol., 130(1), p. 014001.
5. Gustafsson, O. G., and Tallian, T. E., 1962, "Detection of Damage in Assembled Rolling Element Bearings," ASLE Trans., 5(1), pp. 197-209.
6. Dyer, D., and Stewart, R. M., 1978, "Detection of Rolling Element Bearing Damage by Statistical Vibration Analysis," ASME J. Mech. Des., 100 (2), pp. 229-235.
7. Igarashi, T., and Hamada, H., 1982, "Studies on the Vibration and Sound of Defective Rolling Bearings (First Report: Vibration of Ball Bearings With One Defect)," Bull. JSME 25(204), pp. 994-1001.
8. Mathew, J., and Alfredson, R. J., 1984, "The Condition Monitoring of Rolling Element Bearings Using Vibration Analysis," ASME J. Vib. Acoust., 106(3), pp. 447-453.
9. Alfredson, R. J., and Mathew, J., 1985, "Time Domain Methods for Monitoring the Condition of Rolling Element Bearings," Inst. Eng., Aust., Mech. Eng. Trans., 10(2), pp. 102-107.
10. Martin, H. R., and Honarvar, F., 1995, "Application of Statistical Moments to Bearing Failure Detection," Appl. Acoust., 44(1), pp. 67-77.
11. Williams, T., Ribadeneisa, X., Billington, S., and Kurfess, T., 2001, "Rolling Element Bearing Diagnostics in Run-to-Failure Lifetime Testing," Mech. Syst. Signal Process., 15 (5), pp. 979-993.
12. Chinmay, K., and Mohanty, A. R., 2004, "Application of KS Test in Ball Bearing Fault Diagnosis," J. Sound Vib., 269(1), pp. 439-454.
13. Karacay, T., and Akturk, N., 2009, "Experimental Diagnostics of Ball Bearings Using Statistical and Spectral Methods," Tribol. Int., 42(6), pp. 836-843.
14. Taylor, J., 1980, "Identification of Bearing Defects by Spectral Analysis," ASME J. Mech. Des., 102(2), pp. 199-204.
15. Su, Y. T., and Lin, S. J., 1992, "On Initial Fault Detection of a Tapered Roller Bearing: Frequency Domain Analysis," J. Sound Vib., 155(1), pp. 75-84.
16. Johnson, M. S., 2000, "Vibration Tests for Bearing Wear," ASHRAE J., 42(10), pp. 52-56.
17. Yiakopoulos, C. T., Gryllias, K. C., and Antoniadis, I. A., 2005, "Spectral Effects of the Slip Motion in Defective Rolling Element Bearings," Adv. Vib. Eng., 4(2), pp. 199-211.
18. Sheen, Y. T., 2008, "An Envelope Detection Method Based on the First-Vibration-Mode of Bearing Vibration," Measurement, 41(7), pp. 797-809.
19. Ming, Y., Chen, J., and Dong, G., 2011, "Weak Fault Feature Extraction of Rolling Bearing Based on Cyclic Wiener Filter and Envelope Spectrum," Mech. Syst. Signal Process., 25(5), pp. 1773-1785.
20. Yan, R., and Gao, R. X., 2010, "Harmonic Wavelet-Based Data Filtering for Enhanced Machine Defect Identification," J. Sound Vib., 329(15), pp. 3203-3217.
21. Gao, L., Yang, Z., Cai, L., Wang, H., and Chen, P., 2011, "Roller Bearing Fault Diagnosis Based on Nonlinear Redundant Lifting Wavelet Packet Analysis," Sensor, 11(1), pp. 260-277.
22. Wang, X., Zi, Y., and He, Z., 2011, "Multiwavelet Denoising With Improved Neighboring Coefficients for Application on Rolling Bearing Fault Diagnosis," Mech. Syst. Signal Process., 25(1), pp. 285-304.
23. Kumar, R., and Singh, M., 2013, "Outer Race Defect Width Measurement in Taper Roller Bearing Using Discrete Wavelet Transform of Vibration Signal," Measurement, 46(1), pp. 537-545.
24. Yan, R., and Gao, R. X., 2006, "Hilbert-Huang Transform-Based Vibration Signal Analysis for Machine Health Monitoring," IEEE Trans. Instrum. Meas., 55(6), pp. 2320-2329.
25. Cheng, J., Yu, D., and Yu, Y., 2007, "The Application of Energy Operator Demodulation Approach Based on EMD in Machinery Fault Diagnosis," Mech. Syst. Signal Process., 21(2), pp. 668-677.
26. Vafaei, S., and Rahnejat, H., 2003, "Indicated Repeatable Runout With Wavelet Decomposition (IRR-WD) for Effective Determination of Bearing-Induced Vibration," J. Sound Vib., 260 (1), pp. 67-82.
27. Lei, Y., He, Z., and Zi, Y., 2011, "EEMD Method and WNN for Fault Diagnosis of Locomotive Roller Bearings," Expert Syst. Appl., 38(6), pp. 7334-7341.
28. Antoni, J., 2006, "The Spectral Kurtosis: A Useful Tool for Characterising Non-Stationary Signals," Mech. Syst. Signal Process., 20(2), pp. 282-307.
29. Zhang, Y., and Randall, R. B., 2009, "Rolling Element Bearing Fault Diagnosis Based on the Combination of Genetic Algorithms and Fast Kurtogram," Mech. Syst. Signal Process., 23(5), pp. 1509-1517.
30. Lei, Y., Lin, J., He, Z., and Zi, Y., 2011, "Application of an Improved Kurtogram Method for Fault Diagnosis of Rolling Element Bearings," Mech. Syst. Signal Process., 25 (5), pp. 1738-1749.
31. Wang, H., and Chen, P., 2009, "A Feature Extraction Method Based on Information Theory for Fault Diagnosis of Reciprocating Machinery," Sensor, 9 (4), pp. 2415-2436.
32. Yan, R., Liu, Y., and Gao, R. X., 2012, "Permutation Entropy: A Nonlinear Statistical Measure for Status Characterization of Rotary Machines," Mech. Syst. Signal Process., 29, pp. 474-484.
33. McFadden, P. D., and Smith, J. D., 1984, "Model for the Vibration Produced by a Single Point Defect in a Rolling Element Bearing," J. Sound Vib., 96(1), pp. 69-82.
34. McFadden, P. D., and Smith, J. D., 1985, "Model for the Vibration Produced by Multiple Point Defects in a Rolling Element Bearing," J. Sound Vib., 98 (2), pp. 263-273.
35. Tandon, N., and Choudhury, A., 1997, "An Analytical Model for the Prediction of the Vibration Response of Rolling Element Bearing due to a Localized Defect," J. Sound Vib., 205(3), pp. 275-292.
36. Choudhury, A., and Tandon, N., 2006, "Vibration Response of Rolling Element Bearings in a Rotor Bearing System to a Local Defect Under Radial Load," ASME J. Tribol., 128(2), pp. 252-261.
37. Kiral, Z., and Karagulle, H., 2003, "Simulation and Analysis of Vibration Signals Generated by Rolling Element Bearing With Defects," Tribol. Int., 36(9), pp. 667-678.
38. Kiral, Z., and Karagulle, H., 2006, "Vibration Analysis of Rolling Element Bearings With Various Defects Under the Action of an Unbalanced Force," Mech. Syst. Signal Process., 20(8), pp. 1967-1991.
39. Sassi, S., Badri, B., and Thomas, M., 2007, "A Numerical Model to Predict Damaged Bearing Vibrations," J. Vib. Control, 13(11), pp. 1603-1628.
40. Ashtekar, A., Sadeghi, F., and Stacke, L. E., 2008, "A New Approach to Modeling Surface Defects in Bearing Dynamics Simulations," ASME J. Tribol., 130(4), p. 041103.
41. Ashtekar, A., Sadeghi, F., and Stacke, L. E., 2010, "Surface Defects Effects on Bearing Dynamics," Proc. Inst. Mech. Eng., Part J, 224(1), pp. 25-35.
42. Behzad, M., Bastami, A. R., and Mba, D., 2011, "A New Model for Estimating Vibrations Generated in the Defective Rolling Element Bearings," ASME J. Vib. Acoust., 133(4), p. 041101.
43. Sopanen, J., and Mikola, A., 2003, "Dynamic Model of a Deep-Groove Ball Bearing Including Localized and Distributed Defects - Part 1: Theory," Proc. Inst. Mech. Eng., Part K, 217(3), pp. 201-211.
44. Sopanen, J., and Mikola, A., 2003, "Dynamic Model of a Deep-Groove Ball Bearing Including Localized and Distributed Defects - Part 2: Implementation and Results," Proc. Inst. Mech. Eng., Part K, 217(3), pp. 213-223.
45. Cao, M., and Xiao, J., 2007, "A Comprehensive Dynamic Model of Double-Row Spherical Roller Bearing-Modeling Development and Case Studies on Surface Defects, Preloads, and Radial Clearance," Mech. Syst. Signal Process., 22(2), pp. 467-489.
46. Rafsanjani, A., Abbasion, S., Farshidianfa, A., and Moeenfard, H., 2009, "Nonlinear Dynamic Modeling of Surface Defects in Rolling Element Bearing Systems," J. Sound Vib., 319 (3-5), pp. 1150-1174.
47. Patil, M. S., Mathew, J., Rajendrakumar, P. K., and Desai, S., 2010, "A Theoretical Model to Predict the Effect of the Localized Defect on Vibrations Associated With Ball Bearing," Int. J. Mech. Sci., 52(9), pp. 1193-1201.
48. Arslan, H., and Aktürk, N., 2008, "An Investigation of Rolling Element Vibrations Caused by Local Defects," ASME J. Tribol., 130(4), p. 041101.
49. Patel, V. N., Tandon, N., and Pandey, R. K., 2010, "A Dynamic Model for Vibration Studies of Deep Groove Ball Bearings Considering Single and Multiple Defects in Races," ASME J. Tribol., 132(4), p. 041101.
50. Nakhaeinejad, M., and Bryant, M. D., 2011, "Dynamic Modeling of Rolling Element Bearings With Surface Contact Defects Using Bond Graphs," ASME J. Tribol., 133(1), p. 011102.
51. Kankar, P. K., Sharma, S. C., and Harsha, S. P., 2012, "Vibration Based Performance Prediction of Ball Bearings Caused by Localized Defects," Nonlinear Dyn., 69(3), pp. 847-875.
52. Liu, J., Shao, Y. M., and Lim, T. C., 2012, "Vibration Analysis of Ball Bearings With a Localized Defect Applying Piecewise Response Function," Mech. Mach. Theory, 56, pp. 156-169.
53. Liu, J., Shao, Y. M., and Ming, J. Z., 2013, "The Effects of the Shape of Localized Defect in Ball Bearings on the Vibration Waveform," Proc. Inst. Mech. Eng., Part K, 227(3), pp. 261-274.
54. Hertz, H., 1881, "On the Contact of Elastic Solids," J. Reine Angew. Math., 92, pp. 156-171.
55. th ed., Taylor and Francis, New York, Chap. VI.
56. Rahnejat, H., and Gohar, R., 1985, "The Vibrations of Radial Ball Bearings,"Proc. Inst. Mech. Eng., Part C, 199(3), pp. 181-193.
57. Dareing, D. W., and Johnson, K. L., 1975, "Fluid Film Damping of Rolling Contact Vibrations," J. Mech. Eng., 17 (4), pp. 214-218.
58. Mehdigoli, H., Rahnejat, H., and Gohar, R., 1990, "Vibration Response of Wavy Surfaced Disc in Elasohydrodynamic Rolling Contact," Wear, 139(1), pp. 1-15.
59. Kankar, P. K., Sharma, S. C., and Harsha, S. P., 2011, "Rolling Element Bearing Fault Diagnosis Using Wavelet Transform," Neurocomputing, 74(10), pp. 1638-1645.
60. Yiakopoulos, C. T., Gryllias, K. C., and Antoniadis, I. A., 2011, "Rolling Element Bearing Fault Detection in Industrial Environments Based on K-Means Clustering Approach," Expert Syst. Appl., 38 (3), pp. 2888-2911.