Investigation of structure, mechanical and tribological properties of short carbon fiber reinforced UHMWPE-matrix composites

Composites Part B: Engineering

Volumn 76, Issue , 2015, Pages 79-88

  Chukov, D I ^a   Stepashkin, A A ^a   Maksimkin, A V ^a   Tcherdyntsev, V V ^a   Kaloshkin, S D ^a   Kuskov, K V ^a   Bugakov, V I ^b  

^a NATIONAL UNIVERSITY OF SCIENCE AND TECHNOLOGY MISIS   (Russian Federation)

^b INSTITUTE FOR HIGH PRESSURE PHYSICS   (Russian Federation)

Author keywords

A. Carbon fibre; A. Polymer matrix composites (PMCs); B. Fibre matrix bond; B. Mechanical properties; UHMWPE

Indexed keywords

CARBON; CARBON FIBERS; COMPOSITE MATERIALS; FIBERS; MATERIALS PROPERTIES; MECHANICAL PROPERTIES; POLYETHYLENES; REINFORCED PLASTICS; REINFORCEMENT; TRIBOLOGY; ULTRAHIGH MOLECULAR WEIGHT POLYETHYLENES;

FIBER-MATRIX INTERFACES; FIBRE/MATRIX BOND; INTERFACIAL INTERACTION; MATRIX COMPOSITE; MECHANICAL AND TRIBOLOGICAL PROPERTIES; POLYMER MATRIX COMPOSITES (PMCS); SHORT CARBON FIBERS; THERMAL OXIDATION;

POLYMER MATRIX COMPOSITES;

AIR; CARBON FIBERS; COMPOSITES; MECHANICAL PROPERTIES; OXYGEN;

EID: 84924546766     PISSN: 13598368     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compositesb.2015.02.019     Document Type: Article

References (51)

1. S.M. Kurtz UHMWPE biomaterials handbook ultra high molecular weight polyethylene in total joint replacement and medical devices 2nd ed. 2009 Elsevier
2. F. Liu, Z.M. Jin, P. Grigoris, F. Hirt, and C. Rieker Contact mechanics of metal-on-metal hip implants employing a metallic cup with a UHMWPE backing J Eng Med 217 2003 207 213
3. M. Bosetti, L. Zanardi, P. Bracco, L. Costa, and M. Cannas In vitro evaluation of the inflammatory activity of ultra-high molecular weight polyethylene Biomaterials 24 2003 1419 1426
4. H.K. Phil, and C.N. Young The effect of γ-irradiation on ultra-high molecular weight polyethylene recrystallized under different cooling conditions Radiat Phys Chem 60 2001 79 87
5. A.V. Maksimkin, S.D. Kaloshkin, V.V. Tcherdyntsev, F.S. Senatov, and V.D. Danilov Structure and properties of ultra-high molecular weight polyethylene filled with disperse hydroxyapatite Inorg Mater Appl Res 3 4 2012 288 295
6. F.S. Senatov, M.V. Gorshenkov, V.V. Tcherdyntsev, S.D. Kaloshkin, and V.A. Sudarchikov Fractographic analysis of composites based on ultra high molecular weight polyethylene Compos Part B 56 2014 869 875
7. B.P. Chang, A. Hazizan, and B.N. Ramdziah Comparative study of micro- and nano-ZnO reinforced UHMWPE composites under dry sliding wear Wear 297 1-2 2013 1120 1127
8. S. Suñer, C.L. Bladen, N. Gowland, J.L. Tipper, and E. Nazanin Investigation of wear and wear particles from a UHMWPE/multi-walled carbon nanotube nanocomposite for total joint replacements Wear 317 1-2 2014 163 169
9. J.F. Gao, Z.M. Li, S. Peng, and D.X. Yan Temperature-resistivity behaviour of CNTs/UHMWPE: composites with a two-dimensional conductive network Polym Plast Technol Eng 48 4 2009 478 481
10. S. Bhattacharya, R.P. Tandon, and V.K. Sachdev Electrical conduction of graphite filled high density polyethylene composites; experiment and theory J Mater Sci 03 44 2009 2430 2433
11. C. Zhang, C. Ma, P. Wang, and M. Sumita Temperature dependence of electrical resistivity for carbon black filled ultra-high molecular weight polyethylene composites prepared by hot compaction Carbon 43 12 2005 2544 2553
12. Y. Xi, H. Ishikawa, Y. Bin, and M. Matsuo Positive temperature coefficient effect of LMWPE-UHMWPE blends filled with short carbon fibers Carbon 42 8-9 2004 1699 1706
13. Y. Xi, A. Yamanaka, Y. Bin, and M. Matsuo Electrical properties of segregated ultrahigh molecular weight polyethylene/multiwalled carbon nanotube composites J Appl Polym Sci 105 5 2007 2868 2876
14. E. Puukilainen, H. Saarenpaa, and T.A. Pakkanen Compression-molded, lubricant-treated UHMWPE composites J Appl Polym Sci 104 2007 1762 1768
15. G. Guofang, Y. Huayong, and F. Xin Tribological properties of kaolin filled UHMWPE composites in unlubricated sliding Wear 256 1-2 2004 88 94
16. 3/UHMWPE composites irradiated by gamma ray against a CoCrMo alloy Biomed Mater 1 2006 175 179
17. S. Cao, H. Liu, S. Ge, and G. Wu Mechanical and tribological behaviors of UHMWPE composites filled with basalt fibers J Reinf Plast Compos 30 4 2011 347 355
18. J.M. Hofste, J.A. Schut, and A.J. Pennings The effect of chromic acid treatment on the mechanical and tribological properties of aramid fibre reinforced ultra-high molecular weight polyethylene composite J Mater Sci - Mater Med 9 1998 561 566
19. J. Tong, Y. Ma, R.D. Arnell, and R. Luquan Free abrasive wear behavior of UHMWPE composites filled with wollastonite fibers Compos Part A 37 2006 38 45
20. V.S. Chevali, and G.M. Janowski Flexural creep of long fiber-reinforced thermoplastic composites: effect of processing-dependent fiber variables on creep response Compos Part A 41 2010 1253 1262
21. D. Xiong Friction and wear properties of UHMWPE composites reinforced with carbon fiber Mater Lett 59 2005 175 179
22. J. Wang, B. Chen, N. Liu, G. Han, and F. Yan Combined effects of fiber/matrix interface and water absorption on the tribological behaviors of water-lubricated polytetrafluoroethylene-based composites reinforced with carbon and basalt fibers Compos Part A 59 2014 85 92
23. S. Zhou, Q. Zhang, C. Wu, and J. Huang Effect of carbon fiber reinforcement on the mechanical and tribological properties of polyamide6/polyphenylene sulfide composites Mater Des 44 2013 493 499
24. F. Rezaei, R. Yunus, and N.A. Ibrahim Effect of fiber length on thermomechanical properties of short carbon fiber reinforced polypropylene composites Mater Des 30 2009 260 263
25. T. McNally, P. Boyd, C. McClory, D. Bien, I. Moore, and B. Millar Recycled carbon fiber filled polyethylene composites J Appl Polym Sci 107 2008 2015 2021
26. S.J. Pickering Recycling technologies for thermoset composite materials - current status Compos Part A 37 2006 1206 1215
27. L.O. Meyer, K. Schulte, and E. Grove-Nielsen CFRP-recycling following a pyrolysis route: process optimization and potentials J Compos Mater 43 9 2009 1121 1132
28. S.L. Ruan, P. Gao, X.G. Yang, and T.X. Yu Toughening high performance ultrahigh molecular weight polyethylene with MWCNTs Polymer 44 2003 5643 5654
29. H. Mahfuz, M.R. Khan, T. Leventouri, and E. Liarokapis Investigation of MWCNT reinforcement on the strain hardening behavior of ultrahigh molecular weight polyethylene J Nanotechnol 2011 2011 article id 637395
30. S.L. Ruan, P. Gao, and T.X. Yu Ultra-strong gel-spun UHMWPE fibers reinforced using multiwalled carbon nanotubes Polymer 47 2006 1604 1611
31. M.C. Galetz, T. Blab, H. Ruckdaschel, J.K.W. Sandler, V. Altstadt, and U. Glatzel Carbon nanofibre-reinforced ultrahigh molecular weight polyethylene for tribological applications J Appl Polym Sci 104 6 2007 4173 4181
32. W.J. Wood, R.G. Maguire, and W.H. Zhong Improved wear and mechanical properties of UHMWPE-carbon nanofiber composites through an optimized paraffin-assisted melt-mixing process Compos Part B 42 2011 584 591
33. Y.G. Zhu, Z.Q. Li, D. Zhang, D. Zhang, and T. Tanimoto PET/SiO2 nanocomposites prepared by cryomilling J Polym Sci Part B: Polym Phys 44 8 2006 1161 1167
34. G. Wang, Y. Chen, and Q. Wang Structure and properties of poly(ethylene terephthalate)/Na+-montmorillonite nanocomposites prepared by solid state shear milling (S3M) method J Polym Sci Part B: Polym Phys 46 8 2008 807 817
35. H. Huang Structure development and property changes in high density polyethylene/calcium carbonate blends during pan-milling J Appl Polym Sci 74 6 1999 1459 1464
36. M. Stranz, U. Koster, and F. Katzenberg Stress induced formation of metastable phases in semi-crystalline polymers during cryogenic mechanical milling J Metastable Nanocryst Mater 24-25 2005 463 466
37. M. Stranz, and U. Koster Accelerated crystal growth in cryogenic mechanically milled polymers and polymer blends J Alloys Compd 434-435 2007 447 450
38. E. Sclippa (PhD thesis) 1971 University of Waterloo
39. D.I. Chukov, A.A. Stepashkin, M.V. Gorshenkov, V.V. Tcherdyntsev, and S.D. Kaloshkin Surface modification of carbon fibers and its effect on the fiber-matrix interaction of UHMWPE based composites J Alloys Compd 586 2014 459 463
40. A.A. Stepashkin, D.I. Chukov, M.V. Gorshenkov, V.V. Tcherdyntsev, and S.D. Kaloshkin Electron microscopy investigation of interface between carbon fiber and ultra high molecular weight polyethylene J Alloys Compd 586 2014 168 172
41. A.V. Maksimkin, S.D. Kaloshkin, V.V. Tcherdyntsev, and K.S. Yergin Effect of mechanical activation on the phase composition and mechanical properties of ultrahigh molecular weight polyethylene Deform Fract Mater 12 2010 10 14
42. M. Stranz, U. Koster, and F. Katzenberg Stress induced formation of stable & metastable phases in semi-crystalline polymers during cryogenic mechanical milling J Metastable Nanocryst Mater 24-25 2005 463 466
43. H.L. Castricum, H. Yang, H. Bakker, and J.H. Van Deursen A study of milling of pure polymers and a structural transformation of polyethylene Mater Sci Forum 235-238 1997 211 216
44. A.V. Maksimkin, S.D. Kaloshkin, M.Y. Zadorozhnyy, and V.V. Tcherdyntsev Comparison of shape memory effect in UHMWPE for bulk and fiber state J Alloys Compd 586 2014 214 217
45. P.K. Mallick Particulate and short fiber reinforced polymer composites Compr Compos Mat 2 2000 291 331
46. S. Tiwaria, and J. Bijwe Surface treatment of carbon fibers - a review Procedia Technol 14 2014 505 512
47. B. Pukánszky Interfaces and interphases in multicomponent materials: past, present, future Eur Polym J 41 2005 645 662
48. M. Sharma, S. Gao, E. Mäder, H. Sharma, L.Y. Wei, and J. Bijwe Carbon fiber surfaces and composite interphases Compos Sci Technol 102 2014 35 50
49. B.P. Chang, H. Akil, and R.B. Nasir Comparative study of micro- and nano-ZnO reinforced UHMWPE composites under dry sliding wear Wear 297 1-2 2013 1120 1127
50. H.J. Cho, W.J. Wei, H.C. Kao, and C.K. Cheng Wear behavior of UHMWPE sliding on artificial hip arthroplasty materials Mater Chem Phys 88 1 2004 9 16
51. B.P. Chang, H. Akil, and R.B. Nasir Mechanical and tribological properties of zeolite-reinforced UHMWPE composite for implant application Procedia Eng 68 2013 88 94