Nanoindentation test integrated with numerical simulation to characterize mechanical properties of rock materials

Journal of Testing and Evaluation

Volumn 42, Issue 3, 2013, Pages

  Ban, Hoki ^a   Karki, Pravat ^b   Kim, Yong Rak ^b  

^a Hanyang University   (South Korea)

^b UNIVERSITY OF NEBRASKA LINCOLN   (United States)

Author keywords

Aggregate; Finite element method; Material property; Modeling; Nanoindentation; Rock material

Indexed keywords

AGGREGATES; CHARACTERIZATION; COMPUTER SIMULATION; COREMAKING; MATERIALS PROPERTIES; MECHANICAL PROPERTIES; MODELS; NANOINDENTATION; NUMERICAL MODELS; ROCKS;

CONVENTIONAL METHODS; FINITE-ELEMENT TECHNIQUES; LINEAR INTERPOLATION; NANO-INDENTATION MEASUREMENTS; NANOINDENTATION TESTS; PROPERTY MEASUREMENT; ROCK MATERIALS; TRANSPORTATION INFRASTRUCTURES;

FINITE ELEMENT METHOD;

EID: 84924326077     PISSN: 00903973     EISSN: None     Source Type: Journal    
DOI: 10.1520/JTE20130035     Document Type: Article

References (36)

1. Dai, Q., Sadd, M. H., Parameswaran, V., and Shukla, A., "Prediction of Damage Behaviors in Asphalt Materials Using a Micromechanical Finite-Element Model and Image Analysis," J. Eng. Mech., Vol. 131, No. 7, 2005, pp. 668-677 (Pubitemid 41065454)
2. Guddati, M. N., Feng, Z., and Kim, Y. R., "Towards a Micromechanics-Based Procedure to Characterize Fatigue Performance of Asphalt Concrete," Transport. Res. Rec., Vol. 1789, 2002, pp. 121-128
3. Souza, F. V., Soares, J. B., Allen, D. H., and, Evangelista, F., "A Model for Predicting Damage Evolution in Heterogeneous Viscoelastic Asphaltic Mixtures," Transport. Res. Rec., Vol. 1891, 2004, pp. 131-139 (Pubitemid 40406987)
4. Kim, H., Wagoner, M. P., and Buttlar, W. G., "Micromechanical Fracture Modeling of Asphalt Concrete Using a Single-Edge Notched Beam Test," Mater. Struct., Vol. 42, No. 5, 2009, pp. 677-689
5. Aragão, F. T. S., Kim, Y., Lee, J., and Allen, D. H., "Micromechanical Model for Heterogeneous Asphalt Concrete Mixtures Subjected to Fracture Failure," J. Mater. Civil Eng., Vol. 23, No. 1, 2011, pp. 30-38
6. Zhou, F. P., Lydon, F. D., and Barr, B. I. G., "Effect of Coarse Aggregate on Elastic Modulus and Compressive Strength of High Performance Concrete," Cement Concrete Res., Vol. 20, 1995, pp. 177-186
7. Doerner, M. F. and Nix, W. D., "A Method for Interpreting Data from Depth-Sensing Indentation Instruments," J. Mater. Res., Vol. 1, 1986, pp. 601-609
8. Oliver, W. C. and Pharr, G. M., "An Improved Technique for Determining Hardness and Elastic Modulus Using Load and Displacement Sensing Indentation Experiments," J. Mater. Res., Vol. 7, 1992, pp. 1564-1583
9. Mayo, M. J. and Nix, W. D., "A Micro-Indentation Study of Superplasticity in Pb, Sn, and Sn-38 wt. % Pb," Acta Metall., Vol. 36, 1988, pp. 2183-2192
10. Lawn, B. R., Evans, A. G., and Marshall, D. B., "Elastic/Plastic Indentation Damage in Ceramics: The Median/Radial Crack System," J. Am. Ceram. Soc., Vol. 63, 1980, pp. 574-581 (Pubitemid 11447816)
11. Harding, D., Oliver, W., and Pharr, G., "Cracking During Nanoindentation and Its Use in the Measurement of Fracture Toughness," Mater. Res. Soc. Symp. Proc., Vol. 356, 1995, pp. 663-668
12. Tsui, T. Y., Oliver, W. C., and Pharr, G. M., "Influence of Stress on the Measurement of Mechanical Properties Using Nanoindentation. Part I: Experimental Studies in an Aluminum Alloy," J. Mater. Res., Vol. 11, 1996, pp. 752-759 (Pubitemid 126588376)
13. Hainsworth, S. V., Chandler, H. W., and Page, T. F., "Analysis of Nanoindentation Load-Displacement Loading Curves," J. Mater. Res., Vol. 11, 1996, pp. 1987-1995 (Pubitemid 126567453)
14. Gupta, S., Carrillo, F., Balooch, M., Pruitt, L., and Puttlitz, C., "Simulated Soft Tissue Nanoindentation: A Finite Element Study," J. Mater. Res., Vol. 20, 2005, pp. 1979-1994 (Pubitemid 41763301)
15. Constantinides, G., Ulm, F. J., and van Vliet, K., "On the Use of Nanoindentation for Cementitious Materials," Mater. Struct., Vol. 36, 2003, pp. 191-196
16. Mondal, P., Shah, S., and Marks, L., "A Reliable Technique to Determine the Local Mechanical Properties at the Nanoscale for Cementitious Materials," Cement Concrete Res., Vol. 37, No. 10, 2007, pp. 1440-1444 (Pubitemid 47418768)
17. Ossa, E. A. and Collop, A. C., "Spherical Indentation Behavior of Asphalt Mixtures," J. Mater. Civil Eng., Vol. 19, No. 9, 2007, pp. 753-761 (Pubitemid 47307913)
18. Tarefder, R. A., Zaman, A. M., and Uddin,W., "Determining Hardness and Elastic Modulus of Asphalt by Nanoindentation," Int. J. Geomech., Vol. 10(3), 2010, pp. 106-116
19. Poon, B., Rittel, D., and Ravichandran, G., "An Analysis of Nanoindentation in Elasto-Plastic Solids," Int. J. Solids Struct., Vol. 45, 2008, pp. 6399-6415
20. Woodcock, C. L., Bahr, D. F., and Moody, N. R., "Plastic Zone Development Around Nanoindentations," Mater. Res. Soc. Symp. Proc., Vol. 649, 2000, pp. 14-19
21. Xu, Z. and Li, X., "Sample Size Effect on Nanoindentation of Micro-/Nanostructures," Acta Mater., Vol. 54, 2006, pp. 1699-1703 (Pubitemid 43277771)
22. Bolshakov, A., Oliver, W. C., and Pharr, G. M., "Influence of Stress on the Measurement of Mechanical Properties Using Nanoindentation. Part II: Finite Element Simulation," J. Mater. Res., Vol. 11, 1996, pp. 760-768 (Pubitemid 126588377)
23. Knapp, J. A., Follstaedt, D. M., Myers, S. M., Barbour, J. C., and Friedmann, T. A., "Finite Element Modeling of Nanoindentation," J. Appl. Phys., Vol. 85, 1999, pp. 1460-1474
24. Huang, X. and Pelegri, A. A., "Finite Element Analysis on Nanoindentation With Friction Contact at the Film/ Substrate Interface," Comp. Sci. Technol., Vol. 67, 2007, pp. 1311-1319 (Pubitemid 46381385)
25. Cheng, Y. T. and Cheng, C. M., "Scaling Approach to Conical Indentation in Elastic-Plastic Solids With Work Hardening," J. Appl. Phys., Vol. 84, 1998, pp. 1284-1291
26. Cheng, Y. T. and Cheng, C. M., "Scaling Relationships in Conical Indentation of Elastic-Perfectly Plastic Solids," Int. J. Solids Struct., Vol. 36, 1999, pp. 1231-1243
27. Sneddon, I. N., "The Relation Between Load and Penetration in the Axisymmetric Boussinesq Problem for a Punch of Arbitrary Profile," Int. J. Eng. Sci., Vol. 3, 1965, pp. 47-57
28. Liu, S., Gu, Y., and Huang, H., "A New Area Function for Instrumented Nanoindentation at Extremely Small Contact Depths," Mater. Sci. Eng. A, Vol. 528, 2011, pp. 7948-7951
29. Pharr, G. M., Oliver, W. C., and Brotzen, F. R., "On the Generality of the Relationship Among Contact Stiffness, Contact Area, and Elastic Modulus During Indentation," J. Mater. Res., Vol. 7, 1992, pp. 613-617
30. Johnson, K. L., Contact Mechanics, Cambridge University Press, Cambridge, U.K., 1985
31. Greenwood, J. A., Johnson, K. L., and Matsubara, E., "A Surface Roughness Parameter in Hertz Contact," Wear, Vol. 100, 1984, pp. 47-57 (Pubitemid 15488627)
32. Fischer-Cripps, A. C., Nanoindentation, Mechanical Engineering Series, 2nd ed., Springer, New York, 2004
33. Chudoba, T. and Richter, F., "Investigation of Creep Behavior Under Load During Indentation Experiments and Its Influence on Hardness and Modulus Results," Surf. Coat. Technol., Vol. 148, 2001, pp. 191-198
34. Barksdale, R. D., The Aggregate Handbook, National Stone Association, Washington, D.C., 1996
35. ABQUS User's Manual; Version 6.8. (2008). Hibbt, Karlsson & Sorenson, Inc., Pawtucket, RI
36. Goodman, R. E., Introduction to Rock Mechanics, 2nd ed., John Wiley and Sons, New York, 1989