Introduction to finite element vibration analysis, second edition

Introduction to Finite Element Vibration Analysis, Second Edition

Volumn 9780521191609, Issue , 2010, Pages 1-500

  Petyt, Maurice ^a  

^a UNIVERSITY OF SOUTHAMPTON   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

DYNAMIC LOADS; STRUCTURAL DYNAMICS; VIBRATION ANALYSIS;

FINITE ELEMENT VIBRATION ANALYSIS; HIERARCHICAL FINITE ELEMENT METHOD; MATHEMATICAL BASIS; MULTI-LAYERED; NAVAL ARCHITECTS; STRUCTURAL ENGINEER; STRUCTURAL VIBRATIONS; VIBRATING SYSTEMS;

FINITE ELEMENT METHOD;

EID: 84924206325     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1017/CBO9780511761195     Document Type: Book

References (457)

1. A. R. Collar and A. Simpson (1987) Matrices and Engineering Dynamics. Chichester: Ellis Horwood.
2. R. W. Clough and J. Penzien (1975) Dynamics of Structures. New York: McGraw-Hill.
3. C. L. Dym and J. H. Shames (1973) Solid Mechanics: A Variational Approach. New York: McGraw-Hill.
4. M. J. Forray (1968) Variational Calculus in Science and Engineering. New York: McGraw- Hill.
5. C. Fox (1950) Calculus of Variations. Oxford University Press.
6. L. Meirovitch (1967) Analytical Methods in Vibrations. New York: Macmillan.
7. L. Meitrovitch (1975) Elements of Vibration Analysis. New York: McGraw-Hill.
8. W. T. Thomson (1972) Theory of Vibrations with Applications. New Jersey: Prentice-Hall.
9. G. B. Warburton (1976) The Dynamical Behaviour of Structures, 2nd edn. Oxford: Pergamon.
10. A. D. Barr (1962) Torsional waves in uniform rods of non-circular cross-section. J. Mech. Eng. Sci. 4, 127-35.
11. C. L. Dym and J. H. Shames (1973) Solid Mechanics: A Variational Approach. New York: McGraw-Hill.
12. R. F. Hearmon (1961) An Introduction to Applied Anisotropic Elasticity. Oxford: Oxford University Press.
13. H. Kolsky (1963) Stress Waves in Solids. New York: Dover Publications.
14. S. G. Lekhnitskii (1963) Theory of Elasticity of an Anisotropic Elastic Body. Translation from Russian by P. Fern. San Francisco: Holden Day.
15. R. D. Mindlin (1951) Influence of rotatory inertia and shear on flexural motions of isotropic, elastic plates. J. Appl. Mech., Trans. ASME 18, 31-8.
16. S. Timoshenko and J. N. Goodier (1970) Theory of Elasticity, 3rd edn. New York: McGraw-Hill.
17. S. Timoshenko and S. Woinowsky-Krieger (1959) Theory of Plates and Shells, 2nd edn. New York: McGraw-Hill.
18. G. B. Warburton (1976) The Dynamical Behavior of Structures, 2nd edn. Oxford: Pergamon.
19. J. H. Argyris, K. E. Buck, I. Grieger and G. Maraczek (1970) Application of the matrix displacement method to the analysis of pressure vessels. J. Eng. Ind., Trans. ASME 92, 317-29.
20. M. A. J. Bossak and O. C. Zienkiewicz (1973) Free vibration of initially stressed solids, with particular reference to centrifugal-force effects in rotating machinery. J. Strain Anal. 8, 245-52.
21. H. E. Ermutlu (1968) Dynamic Analysis of Arch Dams Subject to Seismic Disturbances. Ph.D. thesis, University of Southampton.
22. S. Ghosh and E. L. Wilson (1969) Dynamic stress analysis of axisymmetric structures under arbitrary loading. Report EERC 69-10, College of Engineering, University of California, Berkeley.
23. P. Kelen (1985) A Finite Element Analysis of the Vibration Characteristics of Rotating Turbine Blade Assemblies. Ph.D. thesis, University of Surrey.
24. M. Langballe, E. Aasen and T. Mellem (1974) Application of the finite element method to machinery. Computers and Structures 4, 149-92.
25. F. E. Sagendorph (1976) Natural frequencies of mid-span shrouded fan blades. In Structural Dynamic Aspects of Bladed Disc Assemblies, ed. A. V. Srinivasan, 93-9. New York: The American Society of Mechanical Engineers.
26. G. Waas (1972) Linear Two-dimensional Analysis of SoilDynamics Problems in Semi-infinite Layered Media. Ph.D. thesis, University of California, Berkeley.
27. E. L. Wilson (1965) Structural analysis of axisymmetric solids. AIAA J. 3, 2269-74.
28. E. L. Wilson, R. L. Taylor, W. P. Doherty and J. Ghaboussi (1973) Incompatible displacement models. In Numerical and Computer Methods in Structural Mechanics, ed. S. J. Fenves, N. Perrone, A. R. Robinson andW. C. Schnbrich, 43-57. New York: Academic.
29. D. J. Dawe (1965) A finite element approach to plate vibration problems. J. Mech. Eng. Sci. 7, 28-32.
30. R. J. Guyan (1965) Distributed mass matrix for plate element bending. AIAA J. 3, 567-8.
31. J. S. Przemieniecki (1966) Equivalent mass matrices for rectangular plates in bending. AIAA J. 4, 949-50.
32. B. M. Irons and K. J. Draper (1965) Inadequacy of nodal connections in a stiffness solution for plate bending. AIAA J. 3, 961.
33. J. L. Tocher and K. K. Kapur (1965) Comment on 'Basis for derivation of matrices for the direct stiffness'. AIAA J. 3, 1215.
34. J. T. Oden (1967) Mechanics of Elastic Structures, New York: McGraw-Hill.
35. G. R. Cowper (1966) The shear coefficient in Timoshenko's beam theory. J. Appl. Mech. Trans. ASME 88, 335-40
36. E. Kreysziz (1972) Advanced Engineering Mathematics, 3rd edn, New York:Wiley.
37. R. Courant and D. Hilbert (1953) Methods of Mathematical Physics, Vol. I. New York: Interscience.
38. L. V. Kanotorovich and V. I. Krylov (1958) ApproximateMethods of Higher Analysis, Groningen: Noordhoff.
39. S. G. Mikhlin (1964) Variational Methods in Mathematical Physics, New York: Macmillan.
40. S. G. Mikhlin (1965) The Problem of the Minimum of a Quadratic Functional, San Francisco: Holden-Day.
41. R. E. D. Bishop, G. M. L. Gladwell and S. Michaelson (1965) The Matrix Analysis of Vibration, Cambridge: Cambridge University Press.
42. C. L. Dym and I. H. Shames (1973) Solid Mechanics: A Variational Approach, New York: McGraw-Hill.
43. G. B. Warburton (1976) The Dynamical Behaviour of Structures, 2nd edn, Oxford: Pergamon.
44. J. T. Oden (1972) Finite Elements of Nonlinear Continua, New York: McGraw-Hill.
45. J. S. Przemieniecki (1968) Theory of Matrix Structural Analysis, New York:McGraw- Hill.
46. S. Timoshenko and J. N. Goodier (1970) Theory of Elasticity, 3rd edn, New York: McGraw-Hill.
47. A. E. H. Love (1944) Mathematical Theory of Elasticity, New York: Dover.
48. R. Courant (1943) Variational methods for the solution of problems of equilibrium and vibrations. Bull. Amer. Math. Soc. 49, 1-29.
49. F. A. Leckie and G. M. Lindberg (1963) The effect of lumped parameters on beam frequencies. Aeronaut. Quart. 14, 224-40.
50. F. F. Rudder (1970) Effect of stringer eccentricity on the normal mode stress response of stiffened flat panel arrays. Conference on Current Developments in Sonic Fatigue, Southampton University. Paper J. Available from ISVR, University of Southampton.
51. J. T. Oden (1967) Mechanics of Elastic Structures, New York: McGraw-Hill.
52. T. Y. Yang and C. T. Sun (1973) Axial-flexural vibration of frameworks using finite element approach. J. Acoust. Soc. Amer. 53, 137-46.
53. G. M. L. Gladwell (1964) The vibration of frames. J. Sound Vibration 1, 402-25.
54. W. Carnegie, J. Thomas and E. Dokumaci (1969) An improved method of matrix displacement analysis in vibration problems. Aeronaut. Quart. 20, 321-32.
55. Z. Kopal (1961) Numerical Analysis. London: Chapman and Hall.
56. F. Scheid (1968) Numerical Analysis. Schaum's Outline Series. New York: McGraw- Hill.
57. D. L. Thomas, J. M. Wilson and R. R. Wilson (1973) Timoshenko beam finite elements. J. Sound Vibration 31, 315-30.
58. A. W. Lees and D. L. Thomas (1982) Unified Timoshenko beam finite element. J. Sound Vibration 80, 355-66.
59. S. Corn, N. Bouthaddi and J. Piranda (1997) Transverse vibrations of short beams: finite element models obtained by a condensation method. J. Sound Vibration 201, 353-63.
60. T. C. Huang (1961) The effect of rotary inertia and of shear deformation on the frequency and normal mode equations of uniform beams with simple end conditions. J. Appl. Mech. Trans. ASME 28, 579-84.
61. T. C. Huang and C. S. Kung (1963) New tables of eigenfunctions representing normal modes of vibration of Timoshenko beams. Developments in Theoretical and Applied Mechanics I, New York: Plenum Press, 59-71.
62. D. J. Dawe (1978) A finite element for the vibration analysis of Timoshenko beams. J. Sound Vibration 60, 11-20.
63. T. Moan (1973) On the local distribution of errors by finite element approximations. In Theory and Practice in Finite Element Structural Analysis, ed. Y. Yamada and R. H. Gallagher. Tokyo: University of Tokyo Press, 43-60.
64. E. Hinton and J. S. Campbell (1974) Local and global smoothing of discontinuous finite element functions using a least squares method. Int. J. Num. Meth. Eng. 8, 461- 80.
65. E. Hinton, F. C. Scott and R. E. Ricketts (1975) Least squares stress smoothing for parabolic isoparametric elements. Int. J. Num. Meth. Eng. 9, 235-56.
66. J. Barlow (1976) Optimal stress locations in finite element models. Int. J. Num. Meth. Eng. 10, 243-51.
67. T. J. R. Hughes (1977) A simple and efficient finite element for plate bending. Int. J. Num. Meth. Eng. 11, 1529-43.
68. G. R. Bhashyam and G. Prathap (1981) The second frequency spectrum of Timoshenko beams. J. Sound Vibration 76, 407-20.
69. A. H. Vermeulen and G. R. Heppler (1998) Predicting and avoiding shear locking in beam vibration problems using the _-spline field approximation method. Comp. Methods Appl. Mech. Eng 158, 311-27.
70. M. D. Olson (1975) Compatibility of finite elements in structural mechanics. Proc. World Cong. on Finite Element Methods in Structural Mechanics, Bournemouth, England. Okehampton: Robinson and Associates. H1-H33.
71. V. Z. Vlasov (1961) Thin Walled Elastic Beams, 2nd edn, Washington, DC: National Science Foundation.
72. M. Tanaka and A. N. Bercin (1997) Finite element modelling of the coupled bending and torsional free vibration of uniform beams with an arbitrary cross-section. Appl. Math. Modell. 21, 339-44.
73. C. A. Mota Soares and J. E. Barradas Cardoso (1979) Finite element dynamic analysis of structures based on the Vlasov beam theory. In Numerical Analysis of the Dynamics of Ship Structures, Euromech 122, Paris.
74. Y. Hu, X. Jin and B. Chen (1996) A finite element model for the static and dynamic analysis of thin-walled beams with asymmetric cross-sections. Comput. Struct. 61, 897-908.
75. Q.-F.Wang (1997) Spline finite member element method for vibration of thin-walled members with shear lag. J. Sound Vibration 206, 339-52.
76. J. H. Kim and Y. Y. Kim (2000) One-dimensional analysis of thin-walled closed beams having general cross-sections. Int. J. Num. Math. Eng. 49, 653-68.
77. G. M. Lindberg (1963) Vibration of non-uniform beams. Aeronaut. Quart. 14, 387- 95.
78. W. L. Cleghorn and B. Tabarrock (1992) Finite element formulation of a tapered Timoshenko beam for free lateral vibration analysis. J. Sound Vibration 152, 461-70.
79. J. Thomas and E. Dokumaci (1974) Simple finite elements for pre-twisted blading vibration. Aeronaut. Quart. 25, 109-18.
80. B. Yardimoglu and T. Yildirim (2004) Finite element model for vibration analysis of pre-twisted Timoshenko beam, J. Sound Vibration 273, 741-54.
81. R. S. Gupta and S. S. Rao (1978) Finite element eigenvalue analysis of tapered and twisted Timoshenko beams. J. Sound Vibration 56, 187-200.
82. P. Raveendranath, G. Singh and B. Pradhan (2000) Free vibration of arches using a curved beam element based on a coupled polynomial displacement field. Comput. Struct. 78, 583-90.
83. P. Litewka and J. Rakowski (2001) Free vibrations of shear-flexible and compressible arches by FEM. Int. J. Num. Math. Eng. 52, 273-86.
84. J.-S.Wu and L.-K. Chiang (2004)Anew approach for free vibration analysis of arches with effects of shear deformation and rotary inertia considered. J. Sound Vibration 277, 49-71.
85. R. R. Rossi (1989) In-plane vibrations of circular rings of non-uniform cross-section with account taken of shear and rotatory inertia effects. J. Sound Vibration 135, 443- 52.
86. J.-S. Wu and L.-K. Chiang (2004) Free vibration of a circularly curved Timoshenko beam normal to its initial plane using finite curved beam elements. Comput. Struct. 82, 2525-40.
87. N.-I. Kim, K.-J. Seo and M.-Y. Kim (2003) Free vibration and spatial stability of nonsymmetric thin-walled curved beams with variable curvatures. Int. J. Solids Structures 40, 3107-28.
88. D. L. Thomas and R. R. Wilson (1973) The use of straight beam finite elements for analysis of vibrations of curved beams. J. Sound Vibration 26, 155-8.
89. P. C. Dunne (1968) Complete polynomial displacement fields for finite element method. Aeronaut. J. 72, 245-6.
90. B. M. Irons, J. Ergatoudis and O. C. Zienkiewicz (1968) Comment on 'Complete polynomial displacement fields for finite element method'. Aeronaut. J. 72, 709-11.
91. J. B. Carr (1970) The effect of shear flexibility and rotatory inertia on the natural frequencies of uniform beams. Aeronaut. Quart. 21, 79-90.
92. J. Barlow (1976) Optimal stress locations in finite element models. Int. J. Num. Meth. Eng. 10, 243-51.
93. M. A. Eisenberg and L. E. Malvern (1973) On finite element integration in natural co-ordinates. Int. J. Num. Meth. Eng. 7, 574-5.
94. K. J. Bathe (1996) Finite Element Procedures. Upper Saddle River, NJ: Prentice Hall.
95. O. C. Zienkiewicz and R. L. Taylor (1989) The Finite Element Method. Vol. 1: Basic Formulation and Linear Problems, 4th edn, London: McGraw-Hill Book Company.
96. T. K. Hellen (1976) Numerical Integration considerations in two and three dimensional isoparametric finite elements. In The Mathematics of Finite Elements and Applications II ed. J. R.Whiteman, London: Academic Press, 511-24.
97. T. Krauthammer (1979) Accuracy of the finite element method near a curved boundary. Computers and Structures 10, 921-9.
98. R. D. Cook, D. S. Malkus, M. E. Plesha and R. J. Witt (2002) Concepts and Applications of Finite Element Analysis, 4th edn, New York: John Wiley & Sons.
99. R. D. Cook (1975) Avoidance of parasitic shear in plane element. J. Struct. Div. Proc. ASCE 101, 1239-53.
100. R. W. Clough and A. K. Chopra (1966) Earthquake stress analysis in earth dams. J. Eng. Mech. Proc. ASCE 92, 197-211.
101. P. C. Hammer, O. J. Marlowe and A. H. Stroud (1956) Numerical integration over simplexes and cones. Mathematical Tables and other Aids to Computation 10, 130-6.
102. M. E. Laursen and M. Gellert (1978) Some criteria for numerically integrated matrices and quadrature formulas for triangles. Int. J. Num. Meth. Eng. 12, 67-76.
103. T. Belytschko (1972) Finite elements for axisymmetric solids under arbitrary loadings with nodes on origin. AIAA J. 10, 1532-3.
104. K. E. Buck (1973) Comment on 'Finite elements for axisymmetric solids under arbitrary loadings with nodes on origin'. AIAA J. 11, 1357-8.
105. T. Belytschko (1973) Reply by Author to K. E. Buck. AIAA J. 11, 1358.
106. H. Deresiewicz and R. D. Mindlin (1955) Axially symmetric flexural vibrations of a circular disc. J. Appl. Mech., Trans. ASME 22, 86-8.
107. D. C. Gazis and R. D. Mindlin (1960) Extensional vibrations and waves in a circular disc and a semi-infinite plate. J. Appl. Mech. Trans. ASME 27, 541-7.
108. W. E. Baker and J. M. Daly (1967) Dynamic analysis of continuum bodies by direct stiffness method. Shock and Vibration Bull. 36, Part 5, 55-68.
109. K. K. Gupta (1984) STARS - A general purpose finite element computer program for analysis of engineering structures. NASA Reference Publication 1129.
110. B. M. Irons (1971) Quadrature rules for brick based finite elements. Int. J. Num. Meth. Eng. 3, 293-4.
111. M. A. Eisenberg and L. E. Malvern (1973) On finite element integration in natural coordinates. Int. J. Num. Meth. Eng. 7, 574-5.
112. D. P. Gao and M. Petyt (1983) Prediction of frequencies of a practical turbine disc. ISVR Memorandum No. 636, University of Southampton.
113. S. S. Rao and A. S. Prasad (1975) Vibrations of annular plates including the effects of rotary inertia and transverse shear deformation. J. Sound Vibration 42, 305-24.
114. K. J. Bathe (1996) Finite Element Procedures. Upper Saddle River, NJ: Prentice Hall.
115. O. C. Zienkiewicz and R. L. Taylor (1989) The Finite Element Method. Vol. 1: Basic Formulation and Linear Problems, 4th edn, London: McGraw-Hill Book. Company.
116. S. E. Johnson and E. I. Field (1973) Three isoparametric solid elements for NASTRAN. NASA TM X-2893 NASTRAN: Users' Experiences, 423-37.
117. C. W. S. To (1982) Application of the finite element method for the evaluation of velocity response of anvils. J. Sound Vibration 84, 529-48.
118. T. K. Hellen (1976) Numerical integration considerations in two and three dimensional isoparametric finite elements. In The Mathematics of Finite Elements and Applications II ed. J. R. Whiteman, London: Academic Press, 511-24.
119. T. K. Hellen (1972) Effective quadrature rules for quadratic solid isoparametric finite elements. Int. J. Num. Meth. Eng. 4, 597-600.
120. A. M. Salama (1976) Finite Element Dynamic Analysis of Blade Packets and Bladed Disc Assemblies. Ph.D. Thesis, University of Southampton.
121. A. E. Armenakas, D. C. Gazis and G. Herrmann (1969) Free Vibrations of Circular Cylinder Shells, Oxford: Pergamon Press.
122. A. Adini and R. W. Clough (1961) Analysis of Plate Bending by the Finite Element Method. Report submitted to the National Science Foundation, G7337.
123. R. J. Melosh (1963) Basis for derivation of matrices for the direct stiffness method. AIAA J. 1, 1631-7.
124. C. V. Smith (1970) Finite Element Model, with Applications to Buildings and K-33 and K-31. Union Carbide Corporation Report Number CTC-29.
125. R. A. Tinawi (1972) Anisotropic tapered elements using displacement models. Int. J. Num. Meth. Eng. 4, 475-89.
126. G. M. Lindberg, M. D. Olson and H. A. Tulloch (1969) Closed Form Finite Element Solutions for Plate Vibrations. National Research Council of Canada, Aeronautical Report, LR-518.
127. G. M. Lindberg and M. D. Olson (1970) Convergence studies of eigenvalue solutions using two finite plate bending elements. Int. J. Num. Meth. Eng. 2, 99-116.
128. R. E. Reid (1965) Comparison ofMethods in Calculating Frequencies of Corner Supported Rectangular Plates. NASA TN D-3030.
129. D. J. Gorman (1981) An analytical solution for the free vibration analysis of rectangular plates resting on symmetrically distributed point supports. J. Sound Vibration 79, 561-74.
130. M. Petyt and W. H. Mirza (1972) Vibration of column supported floor slabs. J. Sound Vibration 21, 355-64.
131. T. Wah (1964) Vibration of stiffened plates. Aeronaut. Quart. 15, 285-98.
132. N. J. Huffington (1956) Theoretical determination of rigidity properties of orthogonally stiffened plates. J. Appl. Mech. Trans. ASME 23, 15-20.
133. F. K. Bogner, R. L. Fox and L. A. Schmit (1966) The generation of inter-elementcompatible stiffness and mass matrices by the use of interpolation formulas. InMatrix Methods in Structural Mechanics, AFFDL-TR-66-80, 397-443.
134. G. A. Butlin and F. A. Leckie (1966) A study of finite elements applied to plate flexure. Symposium on Numerical Methods for Vibration Problems, University of Southampton, 3, 26-37. Availabe from ISVR, Southampton.
135. R. E. Rossi (1997) A note on a finite element for vibrating thin, orthotropic rectangular plates. J. Sound Vibration 208, 864-68.
136. V. Mason (1967) On the use of rectangular finite elements. ISVR Report No. 161, University of Southampton.
137. V. Mason (1968) Rectangular finite elements for analysis of plate vibrations. J. Sound Vibration 7, 437-48.
138. R. R. Wilson and C. A. Brebbia (1971) Dynamic behaviour of steel foundations for turbo-alternators. J. Sound Vibration 18, 405-16.
139. T. J. R. Hughes, R. L. Taylor and W. Kanoknukulcha (1977) A simple efficient finite element for plate bending. Int. J. Num. Meth. Eng. 11, 1529-43.
140. E. D. L. Pugh, E. Hinton and O. C. Zienkiewicz (1978) A study of quadrilateral plate bending elements with reduced integration. Int. J. Num. Meth. Eng. 12, 1059-79.
141. E. Hinton and N. Bicanic (1979) A comparison of Lagrangian and Serendipity Mindlin plate elements for free vibration analysis. Computers and Structures 10, 483- 93.
142. S. Srinivas, C. V. Joga Rao and A. K. Rao (1970) An exact analysis for vibration of simply supported homogeneous and laminated thick rectangular plates. J. Sound Vibration 12, 187-99.
143. J. Robinson (1978) Element evaluation - a set of assessment points and standard tests. In Finite Element Methods in the Commercial Environment, ed. J. Robinson. Okehampton: Robinson and Associates, 218-47.
144. J. L. Tocher (1962) Analysis of Plate Bending using Triangular Elements. Ph.D. dissertation, California University, Berkeley.
145. M. Petyt (1967) Finite Element Vibration Analysis of Cracked Plates in Tension. Ph.D. thesis, University of Southampton.
146. M. Petyt (1966) Structural vibration analysis using triangular finite elements. Symposium on Numerical Methods for Vibration Problems, Southampton University, 3, 55-64. Available from ISVR, Southampton.
147. P. N. Gustafson, W. F. Stokey and C. F. Zorowski (1953) An experimental study of natural vibrations of cantilevered triangular plates. J. Aeronaut. Sci. 20, 331-7.
148. R. W. Clough and J. L. Tocher (1966) Finite element stiffnessmatrices for plate bending. In Matrix Methods in Stuctural Mechanics, AFFDL-TR-66-80, 515-45.
149. R. W. Clough and C. A. Felippa (1968) A refined quadrilateral element for analysis of plate bending. In Matrix Methods in Structural Mechanics, AFFDL-TR-68-150, 399-440.
150. S. M. Dickinson and R. D. Henshell (1969) Clough-Tocher triangular plate bending element in vibration. AIAA J. 7, 560-1.
151. J.-L. Batoz, K.-J. Bathe and L.-W. Ho (1980) A study of three-node triangular plate bending elements. Int. J. Num. Meth. Eng. 15, 1771-812.
152. P. P. Lynn and B. S. Dhillon (1971) Triangular thick plate bending elements. Proc. 1st Int. Conf. on Structural Mechanics in Reactor Technology, Berlin, 6, 365-89.
153. A. L. Deak and T. H. H. Pian (1967) Application of the smooth surface interpolation to the finite element analysis. AIAA J. 5, 187-9.
154. G. Birkhoff and H. L. Garabedian (1960) Smooth surface interpolation. J. Math. Phys. 39, 258-68.
155. B. Fraeijs De Veubeke (1968) A conforming finite element for plate bending. Int. J. Solids Structures 4, 95-108.
156. R. M. Orris and M. Petyt (1973) A finite element study of the vibration of trapezoidal plates. J. Sound Vibration 27, 325-44.
157. T. Rock and E. Hinton (1974) Free vibration and transient response of thick and thin plates using the finite element method. Int. J. Earthquake Eng. Struct. Dyn. 3, 51-63.
158. A. Razzaque (1984) On the four noded discrete Kirchhoff shell elements. In Accuracy, Reliability and Training in FEM Technology, ed. J. Robinson. Okehampton: Robinson and Associates, 473-83.
159. A.-K. Soh and C. Ling (2000) An improved discrete Kirchhoff triangular element for bending, vibration and buckling analysis. Eur. J. Mech. A. Solids 19, 891-910.
160. K.-J. Bathe (1996) Finite Element Procedures. Upper Saddle River, NJ: Prentice Hall.
161. E. Hernández, L. Hervella-Nieto and R. Rodriguez (2003) Computation of the vibration modes of plates and shells by low-order MITC quadrilateral finite elements. Comput. Struct. 81, 615-28.
162. B. S. Al Janabi and E. Hinton (1987) A study of the free vibrations of square plates with various edge conditions. In E. Hinton (ed.) NumericalMethods and Software for Dynamic Analysis of Plates and Shells, Swansea: Pineridge Press, 167-204.
163. A. W. Leissa (1969) Vibration of Plates, Washington DC: US Government Printing Office. (Reprinted 1993 by The Acoustical Society of America.)
164. G. R. Cowper, E. Kosko, G. M. Lindberg and M. D. Olson (1968) A High Precision Triangular Plate Bending Element. National Research Council of Canada, Aeronautical Report LR-514.
165. S. Ghazzi, F. A. Barki and H. M. Safwat (1997) Free vibration analysis of penta, hepta-gonal shaped plates. Comp. Struct. 62, 395-407.
166. N. Popplewell and D. McDonald (1971) Conforming rectangular and triangular plate bending elements. J. Sound Vibration 19, 333-47.
167. R. W. Claassen and C. J. Thorne (1961) Vibrations of thin rectangular isotropic plates. J. Appl. Mech. Trans ASME 28, 304-5.
168. G. M. Lindberg (1967) The Vibration of Stepped Cantilever Plates. National Research Council of Canada, Aeronautical Report, LR-494.
169. R. Plunkett (1963) Natural frequencies of uniform and non-uniform rectangular cantilever plates. J. Mech. Eng. Sci. 5, 146-56.
170. M. D. Olson and G. M. Lindberg (1970) Free Vibrations and Random Response of an Integrally Stiffened Panel. National Research Council of Canada, Aeronautical Report, LR-544.
171. R. N. Yurkovich, J. H. Schmidt and A. R. Zak (1971) Dynamic analysis of stiffened panel structures. J. Aircraft 8, 149-55.
172. R. P. McBean (1968) Analysis of Stiffened Plates by the Finite Element Method. Ph.D. Thesis, Stanford University.
173. M. D. Olson and C. R. Hazell (1977) Vibration studies on some integral rib-stiffened plates. J. Sound Vibration 50, 43-61.
174. M. Petyt (1977) Finite strip analysis of flat skin-stringer structures. J. Sound Vibration 54, 537-47.
175. M. N. Bapu Rao, P. Guruswamy, M. Venkateshwara Rao and S. Pavithran (1978) Studies on vibration of some rib-stiffened cantilever plates. J. Sound Vibration 57, 389-402.
176. C. K. Ramesh and R. M. Belkune (1973) Free vibrations of plate-beam systems. In Theory and Practice in Finite Element Structural Analysis, ed. Y. Yamada and R. H. Gallagher. Tokyo: University of Tokyo Press, 357-70.
177. R. E. Miller (1980) Dynamic aspects of the error in eccentric beam modelling. Int. J. Num. Meth. Eng. 15, 1447-55.
178. R. E. Grandle and C. E. Rucker (1971) Modal analysis of a nine-bay skin-stringer panel. In NASA TM X-2378 NASTRAN: Users' Experiences, 343-61.
179. E. A. Thornton (1972) A NASTRAN Correlation Study for Vibrations of a Crossstiffened Ship's Deck. NASA TM X-2637 NASTRAN: Users' Experiences, 145-59.
180. R. R. Wilson and C. A. Brebbia (1971) Dynamic behaviour of steel foundations for turbo-alternators. J. Sound Vibration 18, 405-16.
181. P. S. Nair and M. S. Rao (1984) On vibration of plates with varying stiffener length. J. Sound Vibration 95, 19-29.
182. M. S. Rao, P. S. Nair and S. Durvasula (1985) On vibration of eccentrically stiffened plates with varying stiffener length. J. Sound Vibration 99, 568-71.
183. A. Mukherjee and M. Mukhopadhyay (1988) Finite element free vibration of eccentrically stiffened plates. Comp. Struct. 30, 1303-17.
184. G. S. Palani, N. R. Iyer and T. V. S. R. Appa Rao (1992) An efficient finite element model for static and vibration analysis of eccentrically stiffened plates/shells. Comp. Struct. 43, 651-61.
185. G. S. Palami, N. R. Iyer and T. V. S. R. Appa Rao (1993) An efficient finite element model for static and vibration analysis of plates with arbitrary located eccentric stiffeners. J. Sound Vibration 166, 409-27.
186. Y. Y. Lee and C.-F. Ng (1998) Sound insertion loss of stiffened enclosure plates using the finite element method and the classical approach. J. Sound Vibration 217, 239-60.
187. N. Popplewell (1971) The vibration of a box-type structure I. Natural frequencies and normal modes. J. Sound Vibration 14, 357-65.
188. S. M. Dickinson and G. B. Warburton (1967) Vibration of box-type structures. J. Mech. Eng. Sci. 9, 325-35.
189. N. Popplewell, N. A. N. Youssef and D. McDonald (1976) Economical evaluation of the vibration characteristics of rectangular structures with sloping roofs. J. Sound Vibration 44, 493-7.
190. T. C. Huang and C. S. Kung (1963) New tables of eigenfunctions representing normal modes of vibration of Timoshenko beams. Developments in Theoretical and Applied Mechanics I. New York: Plenum Press, 59-71.
191. A. W. Lees, D. L. Thomas and R. R. Wilson (1976) Analysis of the vibration of box beams. J. Sound Vibration 45, 559-68.
192. L. A. Schmit, F. K. Bogner and R. L. Fox (1968) Finite deflection structural analysis using plate and shell discrete elements. AIAA J. 6, 781-91.
193. R. Hickling and M. M. Kamal (Eds) (1982) Engine Noise: Excitation, Vibration and Radiation, New York: Plenum Press.
194. N. Lalor and M. Petyt (1982) Noise assessment of engine structure designs by finite element techniques. Engine Noise: Excitation, Vibration and Radiation, 211-44.
195. O. C. Zienkiewicz and R. L. Taylor (1991) The Finite Element Method. Vol. 2: Solid and Fluid Mechanics, Dynamics and Non-linearity, 4th edn, London: McGraw-Hill Book Company.
196. R. D. Cook, D. S. Malkus, M. E. Plesha and R. J. Witt (2002) Concepts and Applications of Finite Element Analysis, 4th edn, New York: John Wiley & Sons.
197. R. H. MacNeal and R. L. Harder (1988) A refined four-noded membrane element with rotational degrees of freedom. Comp. Struct. 28, 75-84.
198. R. D. Cook (1994) Four-node flat shell element: drilling degrees of freedom, membrane-bending coupling, warped geometry, and behaviour. Comp. Struct. 50, 549-55.
199. A. G. Razaqpur, O.Aziz and M. Nofal (1990)Anew quadrilateral facet shell element. In FEM in the Design Process, Okehampton: Rabinson and Associates, 502-10.
200. C. T. F. Ross (1975) Free vibration of thin shells. J. Sound Vibration 39, 337-44.
201. J. J. Webster (1968) Free vibration of rectangular curved panels. Int. J. Mech. Sci. 10, 571-82.
202. M. Petyt (1971) Vibration of curved plates. J. Sound Vibration 15, 381-95.
203. E. Hernández, L. Hervella-Nieto and R. Rodríguez (2003) Computation of the vibration modes of plates and shells by low-order MITC quadrilateral finite elements. Comp. Struct. 81, 615-28.
204. T. Irie, G. Yamada and Y. Kobayashi (1984) Free vibration of a cantilever folded plate. J. Acoust. Soc. Amer. 76, 1743-8.
205. G. Wemper (1989) Mechanics and finite elements of shells. ASME Appl. Mechanics Rev. 42, 129-42.
206. R. H. MacNeal (1989) The evolution of lower order plate and shell elements in MSC/NASTRAN. Finite Elements Anal. Design 5, 197-222.
207. A. K. Noor (1990) Bibliography on monographs and surveys on shells. ASME Appl. Mech. Rev. 43, 223-34.
208. W. Gilewski and M. Radwanska (1991) A survey of finite element models for the analysis of moderately thick shells. Finite Elements Anal. Design 9, 1-21.
209. M. Bernadou (1996) Finite Element Methods for Thin Shell Problems, New York: John Wiley & Sons.
210. M. L. Bucalem and K. J. Bathe (1997) Finite element analysis of shell structures. Arch. Comp. Meth. Eng. 4, 3-61.
211. G. H. Lim (1999) Vibration of plates and shells using finite elements (1996-1997). Finite Elements Anal. Design 31, 223-30.
212. J. Mackerle (1999) Finite element vibration analysis of beams, plates and shells. Shock and Vibration 6, 97-109.
213. H. Y. T. Yang, S. Saigal, A.Masud and R. K. Kapania (2000) A survey of recent shell finite elements. Int. J. Num. Meth. Eng. 47, 101-27.
214. M. S. Qatu (2002) Recent research advances in the dynamic behaviour of shells 1989- 2000. Part 2: homogeneous shells. ASME Appl. Mech. Rev. 55, 415-34.
215. H. Kraus (1967) Thin Elastic Shells, New York: John Wiley & Sons.
216. A. W. Leissa (1993) Vibration of Shells, Sewickley, PA: Acoustical Society of America.
217. G. B. Warburton (1970) Dynamics of shells. In Symposium on Structural Dynamics, Loughborough University. Paper A1.
218. V. V. Novozhilov (1964) Thin Shell Theory, Groeningen: Noordhoff.
219. M. Petyt and C. C. Fleischer (1973) Vibration of curved structures using quadrilateral finite elements. In The Mathematics of Finite Elements and Applications, London: Academic Press, 367-78.
220. J. J. Webster (1968) Free vibration of rectangular curved panels. Int. J. Mech. Sci. 10, 571-82.
221. M. D. Olson and G. M. Lindberg (1971) Dynamic analysis of shallow shells with a doubly-curved triangular finite element. J. Sound Vib. 19, 229-318.
222. O. C. Zienkiewicz and R. L. Taylor (1991) The Finite ElementMethod, 4th edn, Vol. 2, London: McGraw-Hill.
223. C. T. F. Ross (1984) Finite Element Programs for Axisymmetric Problems in Engineering, Chichester: Ellis Horwood.
224. J. J. Webster (1967) Free vibrations of shells of revolution using ring finite elements. Int. J. Mech. Sci. 9, 559-70.
225. S. K. Sen and P. L. Gould (1974) Free vibration of shells of revolution using FEM. ASCE J. Eng. Mech. Div. 100, EM2, 283-303.
226. S. C. Fan and M. H. Luah (1989) Spline finite element for axisymmetric free vibrations of shells of revolution. J. Sound Vib. 132, 61-72.
227. K. S. Surana (1980) Transition finite elements for three-dimensional stress analysis. Int. J. Num. Meth. Eng. 15, 991-1020
228. S. Ahmed, B. M. Irons and O. C. Zienkiewicz (1970) Analysis of thick and thin shell structures by curved finite elements. Int. J. Num. Meth. Eng. 2, 419-51.
229. O. C. Zienkiewicz, J. Too and R. L. Taylor (1971) Reduced integration technique in general analysis of plates and shells. Int. J. Num. Meth. Eng. 3, 275-90.
230. W. Weaver Jr. and P. R. Johnston (1987) Structural Dynamics by Finite Elements, Englewood Cliffs, NJ: Prentice-Hall.
231. K.-J. Bathe (1996) Finite Element Procedures. Upper Saddle River, NJ: Prentice-Hall.
232. R. D. Cook, D. S. Malkus, M. E. Plesha and R. J. Witt (2002) Concepts and Applications of Finite Element Analysis, 4th edn, New York: John Wiley.
233. L. D. Hofmeister and D. A. Evensen (1972) Vibration problems using isoparametric shell elements. Int. J. Num. Meth. Eng. 5, 142-45.
234. M. D. Olson and G. M. Lindberg (1969) Vibration analysis of cantilevered curved plates using a new cylindrical shell finite element. Proceedings of the Second Conference on Matrix Methods in Structural Mechanics, Wright-Patterson Air Force Base, Ohio, AFFDL-TR-150, 247-70.
235. C. A. Mota Scares and M. Petyt (1978) Finite element dynamic analysis of practical bladed discs. J. Sound Vib. 61, 561-70.
236. K. S. Surana (1980) Transition finite elements for axisymmetric stress analysis. Int. J. Num. Meth. Eng. 15, 809-32.
237. M. ö zakc¸a and E. Hinton (1994) Free vibration analysis and optimisation of axisymmetric plates and shells - 1. finite element formulation. Comp. Struct. 6, 1181-1197.
238. H. Kunieda (1984) Flexural axisymmetric free vibrations of a spherical dome: exact results and approximate solutions. J. Sound Vib. 92, 1-10.
239. J. N. Reddy (2003) Mechanics of Laminated Composite Plates and Shells: Theory and Analysis, 2nd edn, Boca Raton, FI: CRC Press.
240. J. N. Reddy (1985)Areview of the literature on finite element modelling of laminated composite plates. Shock Vib. Dig. 17(4), 3-8.
241. A. K. Noor and W. S. Burton (1989) Assessment of shear deformation theories for multi-layered composite plates. Appl. Mech. Rev. 42, 1-13.
242. J. N. Reddy (1989) Refined computational models of composite laminates. Int. J. Num. Meth. Eng. 27, 361-82.
243. A. K. Noor and W. S. Burton (1990) Assessment of computational models for multilayered anisotropic plates. Composite Struct. 14, 233-65.
244. J. N. Reddy (1990) A review of refined theories of laminated plates. Shock Vib. Dig. 22(7), 3-17.
245. A. K. Noor (1992) Mechanics of anisotropic plates and shells - a new look at an old subject. Comput. Struct. 44, 499-514.
246. J. N. Reddy and D. H. Robbins (1994) Theories and computational models for composite laminates. Appl. Mech. Rev. 47, 147-69.
247. E. Carrera (2002) Theories and finite elements for multi-layered, anisotropic, composite plates and shells. Arch. Comput. Math. Eng. 9, 87-140.
248. L. P. Kollar and G. P. Springer (2003) Mechanics of Composite Structures, Cambridge: Cambridge University Press.
249. M. S. Qatu (2004) Vibration of Laminated Shells and Plates, Kidlington: Elsevier.
250. C. Mei and C. B. Prasad (1989) Effects of large deflection and transverse shear on responses of rectangular symmetrical composite laminates subjected to acoustic excitation. J. Comp. Materials 23, 606-39.
251. E. A. Thornton (1977) Free vibrations of unsymmetrically laminated cantilevered composite panels. Shock Vibration Bull. 47 (Part 2), 79-88.
252. T. S. Chow (1971) On the propagation of flexural waves in an orthotropic laminated plate and its response to an impulsive load. J. Comp. Materials 5, 306-319.
253. J. M. Whitney (1973) Shear correction factors for orthotropic laminates under static load. J. Appl. Mech. Trans. ASME 40, 302-304.
254. W. H. Wittrick (1987) Analytical three-dimensional elasticity solutions to some plate problems and some observations on Mindlin plate theory. Int. J. Solids Struct. 23, 441-64.
255. J. N. Reddy (1979) Free vibration of antisymmetric angle-ply laminated plates including transverse shear deformation by the finite element method. J. Sound Vibration 66, 565-76.
256. C. W. Bert and T. L. C. Chen (1978) Effect of shear deformation on vibration of antisymmetric angle-ply laminated rectangular plates. Int. J. Solids Struct. 14, 465-73.
257. J. N. Reddy (1984) A simple higher-order theory for laminated composite plates. J. Appl. Mech. Trans. ASME 51, 745-52.
258. J. N. Reddy (1984) A refined nonlinear theory of plates with transverse shear deformation. Int. J. Solids Struct. 20, 881-906.
259. J. N. Reddy (1990) A general non-linear third-order theory of plates with moderate thickness. Int. J. Nonlinear Mech. 25, 677-86.
260. S.-Y. Lee and S.-C. Wooh (2004) Finite element vibration analysis of composite box structures using the high order plate theory. J. Sound Vibration 277, 801- 14.
261. S. Liu (1991) A vibration analysis of composite laminated plates. Finite Elements Anal. Design 9, 295-307.
262. A. K. Ghosh and S. S. Dey (1994) Free vibration of laminated composite plates - a simple finite element based on higher order theory. Comput. Struct. 52, 397-404.
263. M. Soula, R. Nasri, A. Ghazel and Y. Chevalier (2006) The effects of kinematic model approximations on natural frequencies and modal damping of laminated composite plates. J. Sound Vibration 297, 315-28.
264. D. A. Saravanos, P. R. Heyliger and D. A. Hopkins (1997) Layerwise mechanics and finite elements for the dynamic analysis of piezoelectric composite plates. Int. J. Solids Struct. 34, 359-78.
265. D. A. Saravanos and P. R. Heyliger (1999) Mechanics and computational models for laminated piezoelectric beams, plates and shells. Appl. Mech. Rev. 52, 305-19.
266. A. Benjeddo (2000) Advances in piezoelectric finite element modelling of adaptive structural elements. Comput. Struct. 76, 347-63.
267. M. S. Qatu (2002) Recent research advances in the dynamic behaviour of shells: 1989- 2000, part 1: Laminated composite shells. Appl. Mech. Rev. 55, 325-49.
268. H. Matsunaga (2002) Assessment of a global higher-order deformation theory for laminated composite and sandwich plates. Composite Struct. 56, 279-291.
269. F. J. Plantema (1966) Sandwich Construction: The Bending and Buckling of Sandwich Beams. Plates and Shells, New York: John Wiley & Son.
270. H. G. Allen (1969) Analysis and Design of Structural Sandwich Panels, Oxford: Pergamon Press.
271. R. A. Shenoi and J. F. Wellicome (eds) (1993) Composite Materials in Maritime Structures. Vol. 1: Fundamental Aspects. Vol. 2: Practical Considerations, Cambridge: Cambridge University Press.
272. Mallikarjura and T. Kant (1993) A critical review and some results of recently developed refined theories of fibre-reinforced laminated composites and sandwiches. Composite Struct. 23, 293-312.
273. J. Mackerle (2002) Finite element analysis of sandwich structures: a bibliography (1980-2001). Eng. Comput. 19, 206-45.
274. A. K. Nayak, S. S. J. Moy and R. A. Shenoi (2002) Free vibration analysis of composite sandwich plates based on Reddy's higher-order theory. Composites: Part B 33, 505-19.
275. M. E. Raville and C. E. S. Ueng (1967) Determination of natural frequencies of vibration of a sandwich plate. Exp. Mech. 7, 490-93.
276. L. Meirovitch and H. Baruh (1983) On the inclusion principle for the hierarchical finite element method. Int. J. Num. Meth. Eng. 19, 281-91.
277. A. Peano (1976) Hierarchies of conforming finite elements for plane elasticity and plate bending. Comput. Math. Appl. 2, 211-24.
278. D. C. Zhu (1986) Development of hierarchical finite element methods at BIAA. Proceedings of the International Conference on Computational Mechanics, Tokyo.
279. S. I. Hayek (2001) Advanced Mathematical Methods in Science and Engineering, New York: Marcel Dekker.
280. O. Beslin and J. Nicolas (1997) A hierarchical functions set for predicting very high order plate bending modes with any boundary conditions. J. Sound Vibration 202, 633-55.
281. N. S. Bardell (1989) The application of symbolic computing to the hierarchical finite element method. Int. J. Num. Meth. Eng. 28, 1181-1204.
282. N. S. Bardell (1991) Free vibration analysis of a flat plate using the hierarchical finite element method. J. Sound Vibration 151, 263-89.
283. A. W. Leissa (1969) Vibration of Plates, Washington DC: US Government Printing Office. (Reprinted 1993 by the Acoustical Society of America.)
284. N. S. Bardell (1992) The free vibration of skew plates using the hierarchical finite element method. Comput. Struct. 45, 841-74.
285. K. M. Liew and K. Y. Lam (1990) Applications of two-dimensional orthogonal plate functions to flexural vibration of skew plates. J. Sound Vibration 139, 241-252.
286. W. Han and M. Petyt (1996) Linear vibration analysis of laminated rectangular plates using the hierarchical finite element method - I. Free vibration analysis. Comput. Struct. 61, 705-12.
287. S. T. Chow, K. M. Liew and K. Y. Lam (1992) Transverse vibration of symmetrically laminated rectangular composite plate. Compos. Struct. 20, 213-26.
288. N. S. Bardell, J. M. Dunsdon and R. S. Langley (1995) Free vibration analysis of thin rectangular laminated plate assemblies using the h-p version of the finite element method. Compos. Struct. 32, 237-46.
289. D. W. Jensen and E. F. Crawley (1984) Frequency determination techniques for cantilevered plates with bending-torsion coupling. AIAA J 22, 415-20.
290. N. S. Bardell (1991) The free vibration of cylindrically-curved rectangular panels. In Structural Dynamics: Recent Advances, London: Elsevier, 254-63.
291. A. W. Leissa (1993) Vibration of Shells, Sewickley, PA: Acoustical Society of America.
292. L. J. West, N. S. Bardell, J. M. Dunsdon and P. M. Loasby (1997) Some limitations associated with the use of K-orthogonal polynomials in hierarchical versions of the finite element method. In Structural Dynamics: Recent Advances, Southampton ISVR: University of Southampton, 217-31.
293. A. Y. T. Leung and J. K.W. Chan (1998) Fourier p-element for the analysis of beams and plates. J. Sound Vibration 212, 179-85.
294. A. Y. T. Leung, B. Zhu, J. Zheng and H. Yang (2004) Analytical trapezoidal Fourier p-element for vibrating plane problems. J. Sound Vibration 271, 67-81.
295. A. Y. T. Leung and B. Zhu (2004) Transverse vibration of thick polygonal plates using analytically integrated trapezoidal Fourier p-element. Comput. Struct. 82, 109-19.
296. C. M. Wang, J. N. Reddy and K. H. Lee (2000) Shear Deformable Beams and Plates, Oxford: Elsevier.
297. N. S. Bardell, J. M. Dunsdon and R. S. Langley (1997) Free vibration analysis of coplanar sandwich panels. Comput. Struct. 38, 463-75.
298. M. E. Raville and C. E. S. Veng (1967) Determination of natural frequencies of vibration of a sandwich plate. Ex. Mech. 7, 490-93.
299. N. S. Bardell, J. M. Dunsdon andR. S. Langley (1998) Free vibration of thin, isotropic, open, conical panels. J. Sound Vibration 217, 297-320.
300. N. S. Bardell, R. S. Langley, J. M. Dunsdon and G. S. Aglietti (1999) An h-p finite element vibration analysis of open conical sandwich panels and conical sandwich frusta. J. Sound Vibration 226, 345-77.
301. D. J. Wilkins, C. W. Bert and D. M. Egle (1970) Free vibration of orthotropic sandwich conical shells with various boundary conditions. J. Sound Vibration 13, 211-28.
302. J. H. Wilkinson (1965) The Algebraic Eigenvalue Problem, Oxford: Clarendon Press.
303. R. E. D. Bishop, G. M. L. Gladwell and S. Michaelson (1965) The Matrix Analysis is of Vibration, Cambridge: Cambridge University Press.
304. A. R. Gourlay and G. A. Watson (1973) Computational Methods for Matrix Eigenproblems, Chichester: Wiley.
305. T. J. R. Hughes (1987) The Finite Element Method: Linear Static and Dynamic Finite Element Analysis, Englewood Cliffs, NJ: Prentice Hall.
306. H. Kardestuncer and D. H. Norrie (eds) (1988) Finite Element Handbook, New York: McGraw-Hill.
307. N. S. Sehmi (1989) LargeOrder Structural Eigenanalysis Techniques, Chichester: Ellis Horwood Ltd.
308. A. Jennings and J. J. McKeown (1992) Matrix Computation, 2nd edn, Chichester: John Wiley & Sons.
309. K. J. Bathe (1996) Finite Element Procedures, Upper Saddle River, NJ: Prentice Hall.
310. M. Geradin and D. Rixen (1997) Mechanical Vibrations: Theory and Applications to Structural Dynamics, 2nd edn, Chichester: John Wiley & Sons.
311. M. Petyt (1998) Introduction to Finite Element Vibration Analysis, 1st edn, Cambridge: Cambridge University Press.
312. G. W. Stewart (2001) Matrix Algorithms Vol. II: Eigensystems, Philadelphia: SIAM.
313. R. D. Cook, D. S. Malkus, M. E. Plesha and R. J. Witt (2002) Concepts and Applications of Finite Element Analysis, 4th edn, New York: John Wiley & Sons.
314. G. M. L. Gladwell (1961) Vibrating systems with equal natural frequencies. J. Mech. Eng. Sci. 3, 178-81.
315. W. Barth, R. S. Martin and J. H.Wilkinson (1967) Calculation of the eigenvalues of a symmetric tridiagonal matrix by the method of bisection. Numerische Mathematik 9, 386-93.
316. G. Peters and J. H. Wilkinson (1969) Eigenvalues of Ax = _Bx with band symmetric A and B. Computer J. 12, 398-404.
317. R. B. Lehoucq and D. C. Sorensen (1996) Deflation techniques for an implicitly restarted Arnoldi iteration. SIAM J. Matrix Anal. Appl. 17, 789-821.
318. G. L. G. Sleijpen and H. A. van der Vorst (1996)AJacobi-Davidson iteration method for linear eigenvalue problems. SIAM J. Matrix Anal. Appl. 17, 401-25.
319. D. L. Thomas (1979) Dynamics of rotationally periodic structures. Int. J. Num. Meth. Eng. 14, 81-102.
320. A. V. Srinivasan (ed.) (1976) Structural Dynamic Aspects of Bladed Disk Assemblies, New York: The American Society of Mechanical Engineers.
321. C. A. Mota Soares, M. Petyt and A. M. Salama (1976) Finite element analysis of bladed discs. Structural Dynamic Aspects of Bladed Disk Assemblies, 73-91.
322. A. M. Salama, M. Petyt and C. A. Mota Soares (1976) Dynamic analysis of bladed disks by wave propagation and matrix difference techniques. Structural Dynamic Aspects of Bladed Disk Assemblies, 45-56.
323. A. W. Leissa (1969) Vibration of Plates. NASA SP-160.
324. C. A. Mota Soares and M. Petyt (1978) Finite element analysis of practical bladed discs. J. Sound Vibration 61, 561-70.
325. R. L. Nelson and D. L. Thomas (1978) Free vibration analysis of cooling towers with column supports. J. Sound Vibration 57, 149-53.
326. R. J. Guyan (1965) Reduction of stiffness and mass matrices. AIAA J. 3, 380.
327. B. M. Irons (1965) Structural eigenvalue problems: elimination of unwanted variables. AIAA J. 3, 961-2.
328. G. C. Wright and G. A. Miles (1971) An economical method for determining the smallest eigenvalues of large linear systems. Int. J. Num. Meth. Eng. 3, 25-34.
329. M. Geradin (1971) Error bounds for eigenvalue analysis by elimination of variables. J. Sound Vibration 19, 111-32.
330. R. D. Henshall and J. H. Ong (1975) Automatic masters for eigenvalue economization. Int. J. Earthquake Engineering and Structural Dynamics 3, 375-83.
331. V. N. Shah and M. Raymund (1982) Analytical selection of masters for the reduced eigenvalue problem. Int. J. Num. Meth. Eng. 18, 89-98.
332. N. Bouhaddi (1992) A method for selecting master DOF in dynamic substructuring using the Guyan condensation method. Comput. Struct. 45, 941-46.
333. R. G. Anderson, B. M. Irons and O. C. Zienkiewicz (1968) Vibration and stability of plates using finite elements. Int. J. Solids Structures 4, 1031-55.
334. R. Levy (1971) Guyan reduction solutions recycled for improved accuracy. In NASTRAN: Users' Experiences, NASA TM X-2378, 201-20.
335. N. Popplewell, A. W. M. Bertels and B. Arya (1973) A critical appraisal of the elimination technique. J. Sound Vibration 31, 213-33.
336. D. L. Thomas (1982) Errors in natural frequency calculations using eigenvalue economization. Int. J. Num. Meth. Eng. 18, 1521-27.
337. R. Lin and Y. Xia (2003)Anew eigensolution of structures via dynamic condensation. J. Sound Vibration 266, 93-106.
338. Z.-Q. Qu (2004) Model Order Reduction Techniques with Applications in Finite Element Analysis, Berlin: Springer.
339. L. Meirovitch (1980) Computational Methods in Structural Dynamics, Rijn, The Netherlands: Sijthoff & Noordhoff.
340. R. R. Craig Jr. and A. J. Kurdila (2006) Fundamentals of Structural Dynamics, New York: John Wiley.
341. K. Kubomura (1982) A theory of substructure modal synthesis. Trans. AMSE, J. Appl. Mech. 49, 903-9.
342. R. R. Craig Jr. (1987) A review of time-domain and frequency-domain component mode synthesis. J. Modal Anal. 2, 59-72.
343. R. R. Craig Jr. (1995) Substructure methods in vibration. Trans. ASME 117, 207-13.
344. W.-H. Shyu, Z.-D. Ma and G. M. Hulbort (1997) A new component mode synthesis method: quasi-static mode compensation. Finite Elements Anal. Design 24, 271-81.
345. D.-M. Tran (2001) Component mode synthesis methods using interface modes: application to structures with cyclic symmetry. Comput. Struct. 79, 209-22.
346. R. R. Craig and M. C. C. Bampton (1968) Coupling of substructures for dynamic analysis. AIAA J. 6, 1313-19.
347. L. E. Suarez and M. P. Singh (1992) Improved fixed interface method for modal synthesis. AIAA J. 30, 2952-58.
348. R. R. Craig Jr. and A. L. Hale (1988) Block-Krylov component synthesis method for structural model reduction. AIAA J. Guidance, Control Dynamics 11, 562-70.
349. J. H. Wang and H. R. Chen (1990) A substructure modal synthesis method with high computational efficiency. Comput. Methods Appl. Mech. Eng. 79, 203-17.
350. S.-N. Hou (1969) Review of modal synthesis techniques and a new approach. Shock and Vibration Bull. 40(4), 25-39.
351. L. Jezequel and S. T. Tchere (1991) A procedure for improving component-mode representation in structural dynamic analysis. J. Sound Vibration 144, 409-19.
352. N. Bhouhaddi and J. P. Lombard (2000) Improved free-interface substructures representation method. Comput. Struct. 77, 269-83.
353. M. A. Tournour, N. Atalla, O. Chiello and F. Sgard (2001) Validation, performance, convergence and application of free interface component mode synthesis. Comput. Struct. 79, 1861-76.
354. B. Haggblad and L. Eriksson (1993) Model reduction methods for dynamic analyses of large structures. Comput. Struct. 43, 735-49.
355. J. H. Kuang and Y. G. Tsuei (1983) A more general method of substructure mode synthesis for dynamic analysis. AIAA J. 23, 618-23.
356. A. L. Klosterman (1976) Modal survey of weakly coupled systems. SAE Paper 760876.
357. K. H. Ghlaim and K. F. Martin (1984) Reduced component modes in damped systems. In Proc. Int. Conf. onModal Analysis. Schenectady, NY: Union College, 683-9.
358. D. J. Ewins (2000) Modal Testing: Theory, Practice and Application, 2nd edn, Letchworth: Research Studies Press.
359. T. Yang, S.-H. Fan and C.-S. Lin (2003) Joint stiffness identification using FRF measurements. Comput. Struct. 81, 2549-56.
360. J. H. Wang and S. C. Chuang (2004) Reducing errors in the identification of structural joint parameters using error functions. J. Sound Vibration 273, 295-316.
361. L. Meritovitch (1967) Analytical Methods in Vibration, New York: Macmillan.
362. S. H. Crandall (1970) The role of damping in vibration theory. J. Sound Vibration 11, 3-18.
363. C. F. Beards (1983) Structural Vibration Analysis, Chichester: Ellis Horwood.
364. Lord Rayleigh (1945) The Theory of Sound, vol. I. New York: Dover.
365. S. Adhirkari (2006) Damping modelling using generalized proportional damping. J. Sound Vibration 293, 156-70.
366. D. I. G. Jones (2001) Handbook of Viscoelastic Vibration Damping, Chichester: John Wiley & Sons.
367. S. Sorrentino and A. Fasana (2007) Finite element analysis of vibrating linear systems with fractional derivative viscoelastic models. J. Sound Vibration 299, 839-853.
368. K. Dovstam (1995) Augmented Hooke's law in frequency domain. A threedimensional, material damping formulation. Int. J. Solids Struct. 32, 2835-52.
369. J. C. Snowdon (1963) Representation of the mechanical damping possessed by rubberlike materials and structures. J. Acoust. Soc. Amer. 35, 821-9.
370. J. C. Snowdon (1968) Vibration and Shock in Damped Mechanical Systems, New York:Wiley.
371. B. Lazan (1968) Damping of Materials and Members in Structural Mechanics, New York: Pergamon.
372. E. E. Ungar (1973) The status of engineering knowledge concerning the damping of built-up structures. J. Sound Vibration 26, 141-54.
373. C. W. Bert (1973) Material damping: an introductory review of mathematical models, measures and experimental techniques. J. Sound Vibration 29, 129-53.
374. A. D. Nashif, D. I. G. Jones and J. P. Henderson (1985) Vibration Damping, New York: John Wiley & Sons.
375. D. J. Ewins (2000) Modal Testing: Theory, Practice and Application, 2nd edn, Letchworth: Research Studies Press.
376. T. K. Caughey and M. E. J. O'Kelly (1965) Classical normal modes in damped linear dynamic systems. ASME J. Appl. Mech. 32, 583-88.
377. K. A. Foss (1958) Coordinates which uncouple the equations of motion of damped linear dynamic systems. ASME J. Appl. Mech. 25, 361-64.
378. D. J. Mead (1970) The existence of normal modes of linear systems with arbitrary damping. Proceedings of the Symposium on Structural Dynamics, Paper C5, Loughborough University of Technology.
379. M. Geradin and D. Rixen (1997) Mechanical Vibrations: Theory and Applications to Structural Dynamics, 2nd edn, Chichester: John Wiley & Sons.
380. M.-C. Kim and I.-W. Lee (1999) A computationally efficient algorithm for the solution of eigenproblems for large structures with non-proportional damping using Lanczos method. Int. J. Earthquake Eng. Struct. Dynamics 28, 157-172.
381. H. J. Bowdler, R. S. Martin, G. Peters and J. H. Wilkinson (1966) Solution of real and complex systems of linear equations. Numerische Mathematik 8, 217-34.
382. J. S. Bendat and A. G. Piersol (1971) Random Data: Analysis and Measurement Procedures, New York:Wiley-Interscience.
383. G. B. Warburton (1976) The Dynamical Behaviour of Structures, 2nd edn, Oxford: Pergamon Press.
384. J. S. Przemieniecki (1968) Theory of Matrix Structural Analysis, New York:McGraw- Hill.
385. R. W. Clough and J. Penzien (1995) Dynamics of Structures, New York: McGraw- Hill.
386. J. E. Grant (1971) Response computation using truncated Taylor series. J. Eng. Mech. Proc. ASME 97 EM2, 295-304.
387. S. Levy and J. P. D.Wilkinson (1976) The Component Element Method in Dynamics, New York: McGraw-Hill.
388. J. C. Houbolt (1950) A recurrence matrix solution for the dynamic response of elastic aircraft. J. Aeronaut. Sci. 17, 540-50.
389. K.-J. Bathe (1996) Finite Element Procedures, Upper Saddle River, NJ: Prentice Hall.
390. N. M. Newmark (1959) A method of computation for structural dynamics. J. Eng. Mech. Proc. ASCE 85, 67-94.
391. R. H. MacNeal and C W. McCormick (1971) The NASTRAN computer program for structural analysis. Comput. Struct. 1, 389-412.
392. E. L. Wilson, I. Farhoomand and K. J. Bathe (1973) Nonlinear dynamic analysis of complex structures. Int. J. Earthquake Engineering and Structural Dynamics 1, 241- 52.
393. E. Hinton, T. Rock andO. C. Zienkiewicz (1976)Anote onmass lumping and related processses in the finite element method. Int. J. Earthquake Engineering and Structural Dynamics 4, 245-9.
394. G. C. Archer and T. M. Whalen (2005) Development of rotationally consistent diagonal mass matrices for plate and beam elements. Comput.Methods Appl.Mech. Eng. 194, 675-89.
395. T. J. R. Hughes (1987) The Finite Element Method. Linear Static and Dynamic Finite Element Analysis, Englewood Cliffs, NJ: Prentice Hall.
396. H. Kardestuncer and D. H. Norrie (eds) (1988) Finite Element Handbook, New York: McGraw-Hill.
397. A.-V. Idesman, M. Schmidt and R. L. Sierakowski (2008) A new explicit predictormulticorrector high-order accurate method for linear elastodynamics. J. Sound Vibration 310, 217-29.
398. W. L. Wood (1990) Practical Time-Stepping Schemes, Oxford: Clarendon Press.
399. J. D. Robson (1963) An Introduction to Random Vibration, Edinburgh: Edinburgh University Press.
400. S. H. Crandall andW.D.Mark (1963) Random Vibration inMechanical Systems, New York: Academic Press.
401. Y. K. Lin and G. Q. Cai (2004) Probabilistic Structural Dynamics, New York: McGraw-Hill.
402. J. S. Bendat and A. G. Piersol (2000) Random Data: Analysis and Measurement Procedures, 3rd edn, New York: John Wiley.
403. D. E. Neweland (1975) An Introduction to Random Vibrations and Spectral Analysis, London: Longman.
404. R. W. Clough and J. Penzien (1993) Dynamics of Structures, 2nd edn, New York: McGraw-Hill.
405. G. B. Warburton (1976) The Dynamical Behaviour of Structures, 2nd edn, Oxford: Pergamon Press.
406. M. D. Olson and G. M. Lindberg (1970) Free vibrations and random response of an integrally stiffened panel. Proc. Conf. Current Developments in Sonic Fatigue, Southampton University. Available from ISVR, Southampton University.
407. M. D. Olson (1972) A consistent finite element method for random response problems. Comput. Struct. 2, 163-80.
408. M. D. Olson and G. M. Lindberg (1970) Free Vibrations and Random Response of an Integrally Stiffened Panel. National Research Council of Canada Aeronautics Report LR-544.
409. M. D. Olson and G. M. Lindberg (1971) Jet noise excitation of an integrally stiffened panel. J. Aircraft 8, 847-55.
410. D. J. Mead and K. K. Pujara (1971) Space harmonic analysis of periodically supported beams: response to converted random loading. J. Sound Vibration 14, 525-41.
411. B. Etkin (1972) Dynamics of Atmospheric Flight, New York:Wiley.
412. R. E. Davis (1966) Statistical dependence effect of normal mode response. AIAA J. 4, 2033-4.
413. C. M. Harris and A. G. Piersol (eds) (2001) Shock and Vibration Handbook, 5th edn, New York: McGraw-Hill.
414. R. E. Cornwell, R. R. Craig and C. P. Johnson (1983) On the application of the modeacceleration method to structural engineering problems. Int. J. Earthquake Engineering and Structural Dynamics 11, 679-88.
415. D. J. Ewins (2000) Modal Testing: Theory, Practice and Application, 2nd edn, Letchworth: Research Press.
416. O. E. Hansteen and K. Bell (1979) On the accuracy of mode superposition analysis in structural dynamics. Int. J. Earthquake Engineering and Structural Dynamics 7, 405-11.
417. K.-J. Bathe (1996) Finite Element Procedures, Upper Saddle River, NJ: Prentice Hall.
418. E. L. Wilson, M.-Y. Yuun and J.M. Dickens (1982) Dynamic analysis by direct superposition of Ritz vectors. Int. J. Earthquake Eng. Struct. Dynamics 10, 813-82.
419. R. R. Craig Jr. (2002) Krylov-Lanczos methods. In Encyclopedia of Vibration, Vol. 2, London: Academic Press, 691-98.
420. R. R. Arnold (1985) Application of Ritz vectors for dynamic analysis of large structures. Comput. Struct. 21, 901-8.
421. T. G. Butler (1982) Using NASTRAN to solve symmetric structures with nonsymmetric loads. Tenth NASTRAN Users' Colloquium, NASA Conference Publication 2249, 216-32.
422. D. L. Thomas (1979) Dynamics of rotationally periodic structures. Int. J. Num. Meth. Eng. 14, 81-102.
423. N. Popplewell, A. W. M. Bertels and B. Arya (1973) A critical appraisal of the elimination technique. J. Sound Vibration 31, 213-33.
424. Z.-Q. Qu (2004) Model Order Reduction Techniques with Applications in Finite Element Analysis, Berlin: Springer.
425. I. M. Smith and D. V. Griffiths (eds) (1997) Programming the Finite ElementMethod, Chichester: John Wiley & Sons.
426. E. Hinton and D. R. J. Owen (1979) An Introduction to Finite Element Computations, Swansea: Pineridge Press.
427. R. D. Cook, D. S. Malkus, M. E. Plesha and R. J. Witt (2002) Concepts and Applications of Finite Element Analysis, 4th edn, New York: John Wiley & Sons.
428. E. Hinton and D. R. J. Owen (1984) Finite Element Software for Plates and Shells, Swansea: Pineridge Press.
429. E. Hinton (ed.) (1988) Numerical Methods and Software for Dynamic Analysis of Plates and Shells, Swansea: Pineridge Press.
430. S. S. Rao (2005) The Finite ElementMethod in Engineering, 4th edn, Oxford: Elsevier.
431. Y. W. Kwon and H. Bang (2000) The Finite Element Method using MATLAB, 2nd edn, Boca Raton FL: CRC Press.
432. R. E. Kielb and A. W. Leissa (1985) Vibrations of twisted cantilever plates - a comparison of theoretical results. Int. J. Num. Meth. Eng. 21, 1365-80.
433. D. J. Ewins and M. Imregun (1986) State-of-the-art assessment of structural dynamic response analysis methods (DYNAS). Shock and Vibration Bull. 56(1), 59-90.
434. D. J. Ewins and M. Imregun (1987) A survey to assess structural dynamic response prediction capabilities: DYNAS. In Quality Assurance in FEM Technology (ed. J. Robinson). Okehampton: Robinson and Associates, 604-15.
435. T. J. R. Hughes (1987) The Finite Element Method: Linear Static and Dynamic Finite Element Analysis. Englewood Cliffs: Prentice-Hall.
436. B. Irons and S. Ahmad (1980) Techniques of Finite Elements, Chichester: Ellis Horwood.
437. M. Petyt (1990) Introduction to Finite Element Vibration Analysis, 1st edn, Cambridge: Cambridge University Press.
438. O. C. Zienkiewicz (1977) The Finite ElementMethod, 3rd edn, London: McGraw-Hill.
439. J. P. Wolfe and C. Song (1996) Finite ElementModelling of UnboundedMedia, Chichester: John Wiley & Sons.
440. J. P. Wolfe and C. Song (1986) A Finite Element Primer, Glasgow: National Engineering Laboratory.
441. J. P. Wolfe and C. Song (1987) Proc. Int. Conf. on Quality Assurance and Standards in Finite Element Analysis, Glasgow: National Engineering Laboratory.
442. J. Robinson (ed.) (1987) Quality Assurance in FEM Technology, Okehampton: Robinson and Associates.
443. J. Robinson (1985) Basic and shape sensitivity tests for membrane and plate bending finite elements. NAFEMS C2.
444. A. J. Morris (1985) Shell finite element evaluation tests. NAFEMS C4.
445. J. Robinson (1979) An Evaluation of Lower Order Membranes as contained in the MSC/NASTRAN, ASAS and PAFEC systems. Report to Royal Aircraft Establishment, Farnborough. MoD Contract No. A93b/494.
446. J. Robinson and S. Blackham (1981) An evaluation of lower order membranes as contained in the ANSYS and SAP4 FEM systems. Finite Element News, Issue No. 2.
447. J. Robinson and S. Blackham (1981) An evaluation of plate bending elements - MSC/NASTRAN, ASAS, PAFEC, ANSYS, SAP4. Robinson and Associates report. ISBN 0 9507649 0 6. Okehampton: Robinson and Associates.
448. D. Hitchings, A. Kamoulakos and G. A. O. Davies (1987) Linear static benchmarks - Vol. 1. NAFEMS P07.
449. D. Hitchings, A. Kamoulakos and G. A. O. Davies (1987) Linear static benchmarks - Vol. 2. National Engineering Laboratory Report, NAFEMS P08.
450. I. C. Taig (1992) Finite Element Analysis of Composite Materials, East Kilbride: NAFEMS R0003.
451. S. Hardy (2001) Composite Benchmarks, East Kilbride: NAFEMS R0031.
452. J. Robinson (1978) Element evaluation - a set of assessment points and standard tests. Finite Element Methods in the Commercial Environment, 217-47. Okehampton: Robinson and Associates.
453. F. Abbassian, F.Dawswell and N. C. Knowles (1987) Selected Benchmarks for Natural Frequency Analysis, East Kilbride: NAFEMS R0015.
454. A. Rahman and M. Petyt (1995) Fundamental Tests for Forced Vibrations of Linear Elastic Structures, East Kilbride: NAFEMS R0034.
455. M. J. Friswell and J. E. Mottershead (1995) Finite Element Model Updating in Structural Dynamics. Dordrecht: Kluwer.
456. D. J. Ewins (2000) Modal Testing. Theory, Practice and Applications, 2nd edn, Baldock: Research Studies Press.
457. S. G. Braun, D. J. Ewins and S. S. Rao (eds) (2002) Encyclopedia of Vibration, London: Academic Press.