Maximum feasible use of recycled sand from construction and demolition waste for eco-mortar production - Part-I: Ceramic masonry waste

Journal of Cleaner Production

Volumn 87, Issue 1, 2015, Pages 692-706

  Ledesma, Enrique Fernández ^a   Jiménez, José Ramón ^a   Ayuso, Jesús ^a   Fernández, José María ^a   De Brito, Jorge ^b  

^a UNIVERSITY OF CÓRDOBA   (Spain)

^b INSTITUTO SUPERIOR TÉCNICO   (Portugal)

Author keywords

Ceramic waste; Construction and demolition waste; Fine recycled aggregates; Masonry mortar; Recycled aggregates; Sustainable construction

Indexed keywords

AGGREGATES; CEMENT INDUSTRY; CEMENTS; CERAMICS INDUSTRY; DEMOLITION; GRADING; RECYCLING; SAND; SHRINKAGE;

CERAMIC WASTE; CONSTRUCTION AND DEMOLITION WASTE; FINE RECYCLED AGGREGATE; MASONRY MORTARS; RECYCLED AGGREGATES; SUSTAINABLE CONSTRUCTION;

MORTAR;

EID: 84923845514     PISSN: 09596526     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jclepro.2014.10.084     Document Type: Article

References (37)

1. Barbudo, A., de Brito, J., Evangelista, L., Bravo, M., Agrela, F., 2013. Influence of waterreducing admixtures on the mechanical performance of recycled concrete. J. Clean. Prod. 59, 93-98.
2. Corinaldesi, V., 2012. Environmentally-friendly bedding mortars for repair of historical buildings. Constr. Build. Mater. 35, 778-784.
3. Corinaldesi, V., Moriconi, G., 2009. Behaviour of cementitious mortars containing different kinds of recycled aggregate. Constr. Build. Mater. 23, 289-294.
4. Cultrone, G., Sebastian, E., Ortega Huertas, M., 2007. Durability of masonry systems: A laboratory study. Constr. Build. Mater. 21, 40-51.
5. Estanqueiro, B.A.M., 2012. Life Cycle Assessment of the Use of Recycled Aggregates in the Production of Concrete (In Portuguese). Dissertation Master on Industrial Engineering and Management. Instituto Superior Tecnico, Lisbon, Portugal.
6. European Commission (DG ENV), 2011. Final Report Task-2. Management of CDW, France. Available from: http://ec.europa.eu/environment/waste/pdf/2011-CDW-Report.pdf.
7. Evangelista, L., de Brito, J., 2010. Durability performance of concrete made with fine recycled concrete aggregates. Cem. Concr. Compos 32, 9-14.
8. Etxeberria, M., Vazquez, E., Mari, A., Barra, M., 2007. Influence of amount of recycled coarse aggregates and production process on properties of recycled aggregate concrete. Cem. Concr. Res. 37 (5), 735-742.
9. Ferreira, L., de Brito, J., Barra, M., 2011. Influence of the pre-saturation of recycled coarse concrete aggregates on concrete properties. Mag. Conc. Res. 63 (8), 617-627.
10. Fonseca, N., de Brito, J., Evangelista, L., 2011. The influence of curing conditions on the mechanical performance of concrete made with recycled concrete waste. Cem. Conc. Comp. 33 (6), 637-643.
11. Gadea, J., Rodríguez, A., Campos, P.L., Garabito, J., Calderon, V., 2010. Lightweight mortar made with recycled polyurethane foam. Cem. Conc. Com. 32, 672-677.
12. Gomes, M., de Brito, J., 2009. Structural concrete with incorporation of coarse recycled concrete and ceramic aggregates: durability performance. Mat. Struct. 42 (5), 663-675.
13. Gonçalves, P., de Brito, J., 2010. Recycled aggregate concrete (RAC) - comparative analysis of existing specifications. Mag. Conc. Res. 62 (5), 339-346.
14. Jimenez, J.R., Ayuso, J., Lopez, M., Fernandez, J.M., de Brito, J., 2013. Use of fine recycled aggregates from ceramic waste in masonry mortar manufacturing. Constr. Build. Mater. 40, 679-690.
15. Katz, A., 2003. Properties of concrete made with recycled aggregate from partially hydrated old concrete. Cem. Concr. Res. 33, 703-711.
16. Knoeri, C., Sanye-Mengual, E., Althau, H.J., 2013. Comparative LCA of recycled and conventional concrete for structural applications. Int. J. Life Cycle Assess. 18 (5), 909-918.
17. Lanzon, M., García-Ruiz, P.A., 2013. Lightweight cement mortars: Advantages and inconveniences of expanded perlite and its influence on fresh and hardened state and durability. Constr. Build. Mater. 22, 1798-1806.
18. Martínez, I., Etxeberria, M., Pavon, E., Díaz, N., 2013. A comparative analysis of the properties of recycled and natural aggregate in masonry mortars. Constr. Build. Mater. 49, 384-392.
19. Martín-Morales, M., Zamorano, M., Valverde-Palacios, I., Cuenca-Moyano, G.M., Sanchez-Rojas, Z., 2013. Quality control of recycled aggregates (RAs) from construction and demolition waste (CDW). In: Pacheco-Torgal, F., Tam, V.W.Y., Labrincha, J.A., Ding, Y., de Brito, J. (Eds.), Handbook of Recycled Concrete and Demolition Waste. Woodhead Publishing Limited, Cambridge, U.K., pp. 270-298.
20. Matias, D., de Brito, J., Rosa, A., Pedro, D., 2013. Mechanical properties of concrete produced with recycled coarse aggregates e influence of the use of superplasticizers. Constr. Build. Mater. 44, 101-109.
21. Medina, C., Frías, M., Sanchez de Rojas, M.I., 2012. Microstructure and properties of recycled concretes using ceramic sanitary ware industry waste as coarse aggregate. Constr. Build. Mater. 31, 112-118.
22. Medina, C., Sanchez de Rojas, M.I., Frías, M., 2013. Properties of recycled ceramic aggregate concretes: water resistance. Cem. Concr. Compos 40, 21-29.
23. Naceri, A., Hamina, M., 2009. Use of waste brick as partial replacement of cement in mortar. Waste Manage 29, 2378-2384.
24. Pereira, P., Evangelista, L., de Brito, J., 2012a. The effect of superplasticisers on the workability and compressive strength of concrete made with fine recycled concrete aggregates. Constr. Build. Mater. 28, 722-729.
25. Pereira, P., Evangelista, L., de Brito, J., 2012b. The effect of superplastificizers on the mechanical performance of concrete made with fine recycled concrete aggregates. Cem. Concr. Compos 34, 1044-1052.
26. Poon, C.S., Shui, Z.H., Lam, L., 2004a. Effect of microstructure of ITZ on compressive strength of concrete prepared with recycled aggregates. Constr. Build. Mater. 18 (6), 461-468.
27. Poon, C.S., Shui, Z.H., Lam, L., Fok, H., Kou, S.C., 2004b. Influence of moisture states of natural and recycled aggregates on the slump and compressive strength of concrete. Cem. Conc. Res. 34 (1), 31-36.
28. Puertas, F., García-Díaz, I., Barba, A., Gazulla, M., Palacios, M., Gomez, M., et al., 2008. Ceramic wastes as alternative raw materials for Portland cement clinker production. Cem. Concr. Compos. 29, 798-805.
29. Rodrigues, F., Carvalho, M.T., Evangelista, L., de Brito, J., 2013. Physical-chemical and mineralogical characterization of fine aggregates from construction and demolition waste recycling plants. J. Clean. Prod. 52, 438-445.
30. Sanchez de Rojas, M.I., Marín, F., Rivera, J., Frías, M., 2006. Morphology and properties in blended cements with ceramic wastes as a pozzolanic material. J. Am. Ceram. Soc. 89 (12), 3701-3705.
31. Silva, J., de Brito, J., Veiga, R., 2008. Fine ceramics replacing cement in mortars. Partial replacement with fine ceramics in rendering mortars. Mat. Struct. 41 (8), 1333-1344.
32. Silva, J., de Brito, J., Veiga, R., 2009. Incorporation of fine ceramics in mortars. Constr. Build. Mater. 23, 556-564.
33. Silva, J., de Brito, J., Veiga, R., 2010. Recycled red-clay ceramic construction and demolition waste for mortars production. J. Mater. Civ. Eng. 22 (3), 236-244.
34. Topçu, I.B., Sengel, S., 2004. Properties of concretes produced with waste concrete aggregate. Cem. Conc. Res. 34 (8), 1307-1312.
35. Torkittikul, P., Chaipaninch, A., 2010. Utilization of ceramic waste as fine aggregate within Portland cement and fly ash concretes. Cem. Concr. Compos. 32, 440-449.
36. Vegas, I., Azkarate, I., Juarrero, A., Frías, M., 2009. Design and performance of masonry mortars made with recycled concrete aggregates. Mater Construcc. 59 (295), 5-18.
37. Vieira, J., Correia, J., de Brito, J., 2011. Post-fire residual mechanical properties of concrete made with recycled concrete coarse aggregates. Cem. Conc. Res. 41 (5), 533-541.