Investigations on the internal shape of constructal cavities intruding a heat generating body

Thermal Science

Volumn 9, Issue 2, 2015, Pages 609-618

  Pouzesh, Abouzar ^a   Hajmohammadi, Mohammad Reza ^a   Poozesh, Sadegh ^a  

^a ISLAMIC AZAD UNIVERSITY   (Iran)

Author keywords

Cavity; Constructal design; Electronic cooling; Heat generating body; Internal shape

Indexed keywords

ELECTRONIC COOLING; FINITE ELEMENT METHOD; GEOMETRY; HEAT GENERATION;

CAVITY; CONSTRUCTAL; CONSTRUCTAL DESIGN; ELECTRONICS COOLING; ELLIPTICALS; HEAT GENERATING BODY; HEAT-GENERATING; INTERNAL SHAPE; OPEN CAVITY; Y-SHAPED;

ASPECT RATIO;

EID: 84923794982     PISSN: 03549836     EISSN: None     Source Type: Journal    
DOI: 10.2298/TSCI120427164P     Document Type: Article

References (30)

1. Bejan, A., Lorente, S., Design with Constructal Theory, John Wiley and Sons Inc., Hoboken, N. J., USA, 2008
2. Wechsatol, W., et al., Optimal Tree-Shaped Networks for Fluid Flow in a Disc-Shaped Body, Int J Heat Mass Transfer, 45 (2002), 25-26, pp. 4911-4924
3. Zhou, S., et al., Optimization of Constructal Volume-Point Conduction with Variable Cross Section Conducting Path, Energy Conversion and Management, 48 (2007), 1, pp. 106-111
4. Zimparov, V. D., et al., Thermodynamic Optimization of Tree-Shaped Flow Geometries with Constant Channel Wall Temperature, Int J Heat Mass Ttransfer, 49 (2006), 25-26, pp. 4839-4849
5. Alebrahim, A., Bejan, A., Constructal Trees of Circular Fins for Conductive and Convective Heat Transfer, Int J Heat Mass Transfer, 42 (1999), 19, pp. 3585-3597
6. Almogbel, M., Bejan., A., Cylindrical Trees of Pin Fins, Int J Heat Mass Transfer, 43 (2000), 23, pp. 4285-4297
7. Bejan, A., Almogbel, M., T-Shaped Fins, Int J Heat Mass Transfer, 43 (2000), 12, pp. 2101-2115
8. Lorenzini, G., Rocha, L., Constructal Design of Y-Shaped Assembly of Fins, Int J Heat Mass Transfer, 49 (2006), 23-24, pp. 4552-4557
9. Lorenzini, G., Rocha, L. A. O., Constructal Design of T-Y Assembly of Fins for an Optimized Heat Removal, Int J Heat Mass Transfer, 52 (2009), 5-6, pp. 1458-1463
10. Lorenzini, G., Moretti, S., Numerical Performance Analysis of Constructal I and Y Finned Heat Exchanging Modules, ASME Journal of Electronic Packaging, 131 (2009), 3, pp. 031012-1-031012-10
11. Lorenzini, G., Moretti, S., A Bejan's Constructal Theory Approach to the Overall Optimization of Heat Exchanging Finned Modules with Air in Forced Convection and Laminar Flow Condition, ASME Journal of Heat Transfer, 131 (2009), 8, pp. 081801-1 - 081801-18
12. Lorenzini, G., Moretti, S., Thermofluid Dynamic Performances Numerical-Constructal Analysis of Heat Exchangers with Standard and Optimized Profiles, Int J Heat Technology, 27 (2009), 1, pp. 145-149
13. Kundu, B., Bhanja, D., Performance and Optimization Analysis of a Constructal T-Shaped Fin Subject to Variable Thermal Conductivity and Convective Heat Transfer Coefficient, Int J Heat Mass Transfer, 53 (2010), 1-3, pp. 254-267
14. Zhang, X., Liu, D., Optimum Geometric Arrangement of Vertical Rectangular Fin Arrays in Natural Convection, Energy Conversion and Management, 51 (2010), 12, pp. 2449-2456
15. Lorenzini, G., Moretti, S., Bejan's Constructal Theory Analysis of Gas-Liquid Cooled Finned Modules, ASME Journal of Heat Transfer, 133 (2011), 7, pp. 071801-1-071801-10
16. Lorenzini, G., et al., Constructal Design of Complex Assembly of Fins, ASME Journal of Heat Transfer, 133 (2011), 8, pp. 081902-1- 081902-7
17. Biserni, C., et al., Frequency Analysis of the Vapotron Effect in Forced Convection: a Challenge for Numerical Description of Multiphase Flows, in: Proceedings, Int. Conf. Computational Methods in Multiphase Flow, WIT Press, Orlando, Fla., USA, 2001, pp. 173-182
18. Bejan, A., Shape and Structure from Engineering to Nature, Cambridge University Press, Cambridge, UK, 2000
19. Rocha, L., et al., Geometric Optimization of Shapes on the Basis of Bejan's Constructal Theory, Int Com in Heat Mass Transfer, 32 (2005), 10, pp. 1281-1288
20. Rocha, L., et al., Constructal Design Applied to the Study of Cavities, Engenharia Termica, 6 (2007), 1, pp. 41-47
21. Biserni, C., Constructal H-Shaped Cavities According to Bejan's Theory, Int J Heat Mass Transfer, 50 (2007), 11-12, pp. 2132-2138
22. Lorenzini, G., et al., Constructal Design Applied to the Geometric Optimization of Y-Shaped Cavities Embedded in a Conducting Medium, ASME Journal of Electronic Packaging, 133 (2011), 4, pp. 041008-041016
23. Lorenzini, G., et al., Geometric Optimization of Isothermal Cavities According to Bejan's Theory, Int J Heat Mass Transfer, 54 (2001), 17-18, pp. 3868-3873
24. Lorenzini, G., Rocha, L., Geometric Optimization of T-Y-Shaped Cavity According to Constructal Design, Int J Heat Mass Transfer, 52 (2009), pp. 4683-4688
25. Lorenzini, G., et al., Constructal Design Applied to the Optimization of Complex Geometries: T-Y-Shaped Cavities with Two Additional Lateral Intrusions Cooled by Convection, Int J Heat Mass Transfer, 55 (2012), pp. 1505-1512
26. Rocha, L. A. O., et al., Constructal Design of a Cavity Cooled by Convection, Int. J. of Design &Nature and Ecodynamic, 5 (2010), pp. 212-220
27. Xie, Z., et al., Geometry Optimization of T-Shaped Cavities According to Constructal Theory, Mathematical and Computer Modeling, 52 (2010), pp. 1538-1546
28. Lorenzini, G., et al., Constructal Design of Cavities Inserted into a Cylindrical Solid Body, ASME Journal of Heat Transfer, 134 (2012), 7, pp. 071301-1-071301-6
29. *** MATLAB, User's Guide, Version 6.0.088, Release 12, 2000, The Mathworks Inc., Natick, Mass., USA
30. ***, FIDAP Manual, Fluid Dynamics International, Inc., Evanston, Ill., USA, 1998