Microstructures and mechanical properties of dissimilar T91/347H steel weldments

Journal of Materials Processing Technology

Volumn 220, Issue , 2015, Pages 76-86

  Mittal, Rutash ^a   Sidhu, Buta Singh ^b  

^a Malout Institute of Management and Information Technology   (India)

^b I K GUJRAL PUNJAB TECHNICAL UNIVERSITY   (India)

Author keywords

Dissimilar metal weldments; GTAW; Mechanical characterization; Micro hardness; Microstructures; SMAW

Indexed keywords

COATED WIRE ELECTRODES; DISSIMILAR METALS; DUCTILITY; ELECTRIC ARC WELDING; ELECTRIC WELDING; FRACTURE MECHANICS; FRACTURE TESTING; GAS METAL ARC WELDING; GAS WELDING; HARDNESS; MECHANICAL PROPERTIES; METALS; MICROSTRUCTURAL EVOLUTION; MICROSTRUCTURE; MORPHOLOGY; NICKEL; TENSILE STRENGTH; TENSILE TESTING; WELDING;

GAS TUNGSTEN ARC WELDING; GTAW; MECHANICAL CHARACTERIZATIONS; MICROSTRUCTURAL FEATURES; MICROSTRUCTURES AND MECHANICAL PROPERTIES; SHIELDED METAL ARC WELDING; SMAW; WELDMENTS;

WELDING ELECTRODES;

EID: 84922347979     PISSN: 09240136     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jmatprotec.2015.01.008     Document Type: Article

References (40)

1. Ahila, S., Prasad, P.B.S.N.V., Ramakrishna, S., Radhakrishan, V.M., 1994. Carbide precipitation in 2.25Cr-1Mo steel and its weldments during creep testing. Mater. Lett. 20, 107-111.
2. Arivazhagan, N., Singh, S., Prakash, S., Reddy, G.M., 2011. Investigation on AISI 304 austenitic stainless steel to AISI 4140 low alloy steel dissimilar joints by gas tungsten arc, electron beam and friction welding. Mater. Des. 32, 3036-3050.
3. Arivazhagan, N., Narayanan, S., Singh, S., Prakash, S., Reddy, G.M., 2012. High temperature corrosion studies on friction-welded low alloy steel and stainless steel in air and molten salt environment at 650°C. Mater. Des. 34, 459-468.
4. Bhaduri, A.K., Venkadesan, S., Rodrigues, P., Mukanda, P.G., 1994. Transition metal joints for steam generators - an overview. Int. J. Press. Vessel Pip. 58, 251-265.
5. Blach, J., Falat, L., Serv, P., 2011. The influence of hydrogen charging on the notch tensile properties and fracture behaviour of dissimilar weld joints of advanced Cr-Mo-V creep resistant steels. Eng. Fail. Anal. 18, 485-491.
6. Das, C.R., Bhaduri, A.K., Srinivasan, G., Shankar, V., Mathew, S., 2009. Selection of filler wire for and effect of auto tempering on the mechanical properties of dissimilar metal joint between 403 and 304L(N) stainless steels. J. Mater. Process. Technol. 209, 1428-1435.
7. Dehmolaei, R., Shamanian, M., Kermanpur, A., 2008. Microstructural characterization of dissimilar welds between alloy 800 and HP heat-resistant steel. Mater. Charact. 59, 1447-1454.
8. Dupont, J.N., 2012. Microstructural evolution and high temperature failure of ferritic to austenitic dissimilar welds. Int. Mater. Rev. 57, 208-234.
9. Dupont, J.N., Kusko, C.S., 2007. Technical note: martensitic formation in austenitic/ferritic dissimilar alloy welds. Weld. J. 82 (February), 51s-54s.
10. Foroozmehr, A., Enayati, M.H., Karimzadeh, F., 2011. Austenite-martensite transformation in nanostructured AISI316L stainless steel powder induced during mechanical milling. J. Mater. Sci. Eng. Adv. Technol. 4, 93-105.
11. Hajiannia, I., Shamanian, M., Kasiri, M., 2013. Microstructure and mechanical properties of AISI 347 stainless steel/A335 low alloy steel dissimilar joint by gas tungsten arc welding. Mater. Des. 50, 566-573.
12. Han, H.Y., Sun, Z., 1994. Welding of tube to tube joints between martensitic and austenitic stainless steels for reactor applications. Int. J. Press. Vessel Pip. 60, 59-64.
13. Jang, C., Lee, J., Sung Kim, J., Eun Jin, T., 2008. Mechanical property variation with in Inconel 82/182 dissimilar metal weld between low alloy steel and 316 stainless steel. Int. J. Press. Vessel Pip. 85, 635-646.
14. Jones, W.K.C., 1974. Heat treatment effect on 2CrMo joints welded with a nickel-base electrode. Weld. J. 53, 225s-231s.
15. Joseph, A., Rai Sanjai, K., Jaya Kumar, T., Murugan, N., 2005. Evaluation of residual stresses in dissimilar weld joints. Int. J. Press. Vessel Pip. 82, 700-705.
16. Kou, S., 2003. Welding Metallurgy, 2nd ed. John Wiley & Sons, Hoboken, NJ.
17. Kumar, S., Shahi, A.S., 2011. Effect of heat input on the microstructure and mechanical properties of gas tungsten arc welded AISI 304 stainless steel joints. Mater. Des. 32, 3617-3623.
18. Kurc, A., Kalinowska-Ozgowicz, K., 2009. The influence of the martensite α′ phase occurring in the structure of cold rolled austenitic Cr-Ni steel on its mechanical properties. Arch. Mater. Sci. Eng. 37, 21-28.
19. Laha, K., Chandravathi, K.S., Rao, K.B.S., Mannan, S.L., 1995. Hot tensile properties of simulated heat affected zone microstructures of 9Cr-1Mo weldment. Int. J. Press. Vessel Pip. 62, 303-311.
20. Mohandas, T., Madhusudhan Reddy, G., Naveed, M., 1999. A comparative evaluation of gas tungsten and shielded metal arc welds of a ferritic stainless steel. J. Mater. Process. Technol. 94, 133-140.
21. Naffakh, H., Shamanian, M., Ashrafizadeh, F., 2009. Dissimilar welding of AISI310 austenitic stainless steel to nickel based alloy 657. J. Mater. Process. Technol. 209, 3628-3639.
22. Pan, C., Zhang, Z., 1994. Characteristics of weld interface in dissimilar austenitic-pearlitic steel welds. Mater. Charact. 33, 87-92.
23. Pilling, J., Ridley, N., 1982. Tempering of 2.25 Pct Cr-1 Pct Mo low carbon steels. Metall. Trans. A 13A, 557-563.
24. Raman, R.K.S., Tyagi, A.K., 1994. Secondary ion mass spectrometry and surface profilometry characterization of oxide scales developed over various regions of weldments of 2.25Cr-1Mo steel. Mater. Sci. Eng. A 185, 97-102.
25. Sathiya, P., Aravindan, S., Noorul Haq, A., 2007. Some experimental investigations on friction welded stainless steel joints. Mater. Des. 29, 1099-1109.
26. Satyanarayana, V.V., Madhusudan Reddy, G., Mohandas, T., 2005. Dissimilar metal friction welding of austenitic-ferritic stainless steels. J. Mater. Process. Technol. 160, 128-137.
27. Shah Hosseini, H., Shamanian, M., Kermanpur, A., 2011. Characterization of microstructures and mechanical properties of Inconel 617/310 stainless steel dissimilar welds. Mater. Charact. 62, 383-386.
28. Shanmugam, K., Lakshminarayanan, A.K., Balasubramanian, V., 2009. Effect of weld metal properties on fatigue crack growth behaviour of gas tungsten arc welded AISI409M grade ferritic stainless steel joints. Int. J. Press. Vessel Pip. 86, 517-524.
29. Sherby Oleg, D., Wadsworth, J., Lesuer Donald, R., Syn Chol, K., 2008. Revisiting the structure of martensite in iron-carbon steels. Mater. Trans. 49, 2016-2027.
30. Sireesha, M., Albert Shaju, K., Shankar, V., Sundarsan, S., 2000a. Comparative evaluation of welding consumables for dissimilar welds between 316LN austenitic stainless steel and alloy 800. J. Nucl. Mater. 279, 65-76.
31. Sireesha, M., Shanker, V., Albert, Shaju, K., Sundarsan, S., 2000b. Microstructural features of dissimilar welds between 316LN austenitic stainless steel and alloy 800. Mater. Sci. Eng. A 292, 74-82.
32. Sireesha, M., Albert Shaju, K., Sundarsan, S., 2002. Thermal cycling of joints between modified 9Cr-1Mo steel and alloy 800 for steam generator application. Int. J. Press. Vessel Pip. 79, 819-827.
33. Sudha, C., Terrance, A.L.E., Albert, S.K., Vijayalakshmi, M., 2000. Systematic study of formation of soft and hard zones in the dissimilar weldments of Cr-Mo steels. J. Nucl. Mater. 302, 193-205.
34. Sudha, C., Thomas Paul, V., Terrance, A.L.E., Saroja, S., Vijayalakshmi, M., 2006. Microstructure and microchemistry of hard zone in dissimilar weldments of Cr-Mo steels. Weld. J. 85 (April), 71s-80s.
35. Sun, Z., 1996. Feasibility of producing ferritic/austenitic dissimilar metal joints by high energy density laser beam process. Int. J. Press. Vessel Pip. 94, 153-160.
36. Tavares, S.S.M., Lafuente, A., Miraglia, S., Fruchart, D., 2002. X-ray diffraction and magnetic analysis of deformation induced martensites in a Fe-17Mn-1.9Al-0 1C steel. J. Mater. Sci. 37, 1645-1648.
37. Viswanathan, R., Jaffee, R.I., Dimmer, J., 1982. Dissimilar metal welds in power plants. In: Proceedings of AWS/EPRI Conference on Joining of Dissimilar Metals, Pittsburgh, PA, USA, pp. 7-27.
38. Wang, S., Ma, Q., Li, Y., 2011. Characterization of microstructure, mechanical properties and corrosion resistance of dissimilar welded joints between 2205 duplex stainless steel and 16MnR. Mater. Des. 32, 831-837.
39. White William, E., 1992. Observation of the influence of Microstructure on corrosion of welded conventional and stainless steels. Mater. Charact. 28, 349-358.
40. Yajiang, L., Juan, W., Bing, Z., Tao, F., 2002. XRD and TEM analysis of microstructure in the welding zone of 9Cr-1Mo-V-Nb heat resisting steel. Bull. Mater. Sci. 25, 213-217.