Identification of polymers in waste tyre reinforcing fibre by thermal analysis and pyrolysis

Journal of Analytical and Applied Pyrolysis

Volumn 111, Issue , 2015, Pages 224-232

  Acevedo, B ^a   Fernandez A M ^a   Barriocanal, C ^a  

^a INSTITUTO NACIONAL DEL CARBÓN   (Spain)

Author keywords

DSC; GC MS; Polymer blends; Recycling; TG DTG; Tyre reinforcing fibre

Indexed keywords

DIFFERENTIAL SCANNING CALORIMETRY; FIBERS; FOURIER TRANSFORM INFRARED SPECTROSCOPY; POLYMER BLENDS; PYROLYSIS; RECYCLING; REINFORCEMENT; SCRAP METAL REPROCESSING; THERMOANALYSIS; TIRES;

DECOMPOSITION PRODUCTS; GC-MS; OIL COMPOSITION; PURE POLYMERS; REINFORCING FIBRES; SCRAP TYRES; TG/DTG; VOLATILE MATTERS;

THERMOGRAVIMETRIC ANALYSIS;

EID: 84921340860     PISSN: 01652370     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jaap.2014.11.005     Document Type: Article

References (51)

1. V. Sahajwalla, M. Zaharia, M. Rahman, R. Khanna, N. Saha-Chaudhury, P. O'Kane, J. Dicker, C. Skidmore, D. Knights, Recycling rubber tyres and waste plastics in EAF steelmaking, Steel Res. Int. 82 (2011) 566-572.
2. G. Ramos, F.J. Alguacil, F.A. López, The reclycing of end-of-life tyres. Technological review, Revista de metalurgia 47 (2011) 273-284.
3. W.S. Anthony, Separation of crumb and fiber in tire recycling operations, in: ASAE Annual International Meeting 2005, 2005, Paper number: 056139.
4. T. Amari, N.J. Themelis, I.K. Wernick, Resource recovery from used rubber tires, Resour. Policy 25 (1999) 179-188.
5. M. Kyari, A. Cunliffe, P.T. Williams, Characterization of oils, gases and char in relation to the pyrolysis of different brands of scrap automotive tires, Energy Fuels 19 (2005) 1165-1173.
6. R. Murillo, E. Aylón, M.V. Navarro, M.S. Callén, A. Aranda, A.M. Mastral, The application of thermal processes to valorise waste tyre, Fuel Process. Technol. 87 (2006) 143-147.
7. G. San Miguel, G.D. Fowler, C.J. Sollars, A study of the characteristics of activated carbons produced by steam and carbon dioxide activation of waste tyre rubber, Carbon 41 (2003) 1009-1016.
8. C. Díez, O. Martínez, L.F. Calvo, J. Cara, A. Morán, Pyrolysis of tyres, influence of the final temperature of the process on emissions and the calorific value of the products recovered, Waste Manag. 24 (2004) 463-469.
9. A.M. Fernández, C. Barriocanal, R. Alvarez, Pyrolysis of awaste from the grinding of scrap tyres, J. Hazard. Mater. 203-204 (2012) 236-243.
10. I. De Marco, M.F. Laresgoiti, M.A. Cabrero, A. Torres, M.J. Chomón, B. Caballero, Pyrolysis of scrap tyres, Fuel Process. Technol. 72 (2001) 9-22.
11. C. Roy, A. Chaala, H. Darmstadt, Vacuum pyrolysis of used tyres enduses for oil and carbon black products, J. Anal. Appl. Pyrolysis 51 (1999) 201-221.
12. S. Seidelt, M. Müller-Hagedorn, H. Bockhorn, Description of tire pyrolysis by thermal degradation behaviour of main components, J. Anal. Appl. Pyrolysis 75 (2006) 11-18.
13. P.T. Williams, S. Besler, Pyrolysis-thermogravimetric analysis of tyres and tyre components, Fuel Process. Technol. 74 (1995) 1277-1283.
14. J. Yang, S. Kaliaguine, C. Roy, Improved quantitative determination of elastomers in tire rubber by kinetic simulation of DTG curves, Rubber Chem. Technol. 66 (1993) 213-229.
15. A.K. Naskar, A.K. Mukherjee, R. Mukhopadhyay, Studies on tyre cords: degradation of polyester due to fatigue, Polym. Degrad. Stab. 83 (2004) 173-180.
16. F. Parres, J.E. Crespo-Amorós, A. Nadal-Gisbert, Mechanical properties analysis of plaster reinforced with fiber and microfiber obtained from shredded tires, Constr. Build. Mater. 23 (2009) 3182-3188.
17. F. Parres, J.E. Crespo-Amorós, A. Nadal-Gisbert, Characterization of fibers obtained from shredded tires, J. Appl. Polym. Sci. 113 (2009) 2136-2142.
18. A. Bartl, A. Hackl, B. Mihalyi, M. Wistuba, I. Marini, Recycling of fibre materials, Trans. IChemE Part B: Process Saf. Environ. Prot. 83 (2005) 351-358.
19. B. Smith (Ed.), Infrared Spectral Interpretation: A Systematic Approach, CRC Press, Boca Raton, 1998.
20. F. Carrillo, X. Coloma, J.J. Suñol, J. Saurina, Structural FTIR analysis and thermal characterisation of lyocell and viscose-type fibres, Eur. Polym. J. 40 (2004) 2229-2234.
21. S.Y. Oh, D. Yoo, Y. Shinb, G. Seo, FTIR analysis of cellulose treated with sodium hydroxide and carbon dioxide, Carbohydr. Res. 340 (2005) 417-428.
22. L.M. Proniewicz, C. Paluszkiewicz, A. Wesełucha-Birczyńska, H. Majcherczyk, A. Barański, A. Konieczna, FT-IR and FT-Raman study of hydrothermally degradated cellulose, J. Mol. Struct. 596 (2001) 163-169.
23. R.J. Morgan, N.L. Butler, Hydrolytic degradation mechanism of Kevlar 49 fibers when dissolved in sulfuric acid, Polym. Bull. 27 (1992) 689-696.
24. E.Y. Kim, S.K. An, H.D. Kim, Graft copolymerization of e-Caprolactam onto Kevlar-49 fiber surface and properties of grafted kevlar fiber reinforced composite, J. Appl. Polym. Sci. 65 (1997) 99-107.
25. R. Ou, H. Zhao, S. Sui, Y. Song, Q. Wang, Reinforcing effects of Kevlar fiber on the mechanical properties of wood-flour/high-density-polyethylene composites, Compos.: Part A 41 (2010) 1272-1278.
26. M.B. Larsen, L. Schultz, P. Glarborg, L. Skaarup-Jensen, K. Dam-Johansen, F. Frandsen, U. Henriksen, Devolatilization characteristics of large particles of tyre rubber under combustion conditions, Fuel 85 (2006) 1335-1345.
27. K. Ch Chiou, F. Ch Chang, Reactive compatibilization of polyamide-6 (PA 6)/polybutylene terephthalate (PBT) blends by a multifunctional epoxy resin, J. Polym. Sci.: Part B: Polym. Phys. 38 (2000) 23-33.
28. B. Yilmaz, Investigation of twistedmonofilamentcord propertiesmadeof Nylon 6.6 and polyester, Fiber Polym. 12 (2011) 1091-1098.
29. L.A. Utracki, A.M. Catani, G.L. Bata, M.R. Kamal, V. Tan, Melt rheology of blends of semicrystalline polymers. I. Degradation and viscosity of poly(ethylene terephthalate)-polyamide-66 mixtures, J. Appl. Polym. Sci. 27 (1982) 1913-1931.
30. M. Shen, H. Kawai, Properties and structure of polymeric alloys, AIChE J. 24 (1978) 1-20.
31. S. Fakirov, M. Evstatiev, M. Schultz, Microfibrillar reinforced composite from drawn poly(ethylene terephthalate)/Nylon-6 blend, Polymer 34 (1993) 4669-4679.
32. F. Samperi, C. Puglisi, R. Alicata, G. Montando, Essential role of chain ends in the Nylon-6/poly(ethylene terephthalate) exchange, J. Polym. Sci.: Part A: Polym. Chem. 41 (2003) 2778-2793.
33. L.Z. Pillon, L.A. Utracki, Compatibilization of polyester/polyamide blends via catalytic ester-amide interchange reaction, Polym. Eng. Sci. 24 (1984) 1300-1305.
34. L.Z. Pillon, J. Lara, D.W. Pillon, On the crystallinity and some structure/property relationships of poly(ethylene terephthalate)-poly(amide-6,6) blends, Polym. Eng. Sci. 27 (1987) 984-989.
35. L.Z. Pillon, L.A. Utracki, Spectroscopic study of poly(ethylene terephthalate)/poly(amide-6.6) blends, Polym. Eng. Sci. 27 (1987) 562-567.
36. Y. Wang, J. Gao, Y. Ma, U.S. Agarwal, Study on mechanical properties, thermal stability and crystallization behaviour of PET/MMT nanocomposites, Compos.: Part B 37 (2006) 399-407.
37. M. Jayakannan, S. Ramakrishnan, Synthesis and thermal analysis of branched and kinked poly(ethylene terephthalate), J. Polym. Sci.: Part A: Polym. Chem. 36 (1998) 309-317.
38. R. Séguéla, Temperature dependence of the melting enthalpy of poly(ethylene terephthalate) and poly(aryl-ether-ether-ketone), Polymer 34 (1993) 1761-1764.
39. J.W. Cho, D.R. Paul, Nylon 6 nanocomposites by melt compounding, Polymer 42 (2001) 1083-1094.
40. P.R. Hornsby, J. Wang, R. Rothon, G. Jackson, G. Wilkinson, K. Cossick, Thermal decomposition behaviour of polyamide fire-retardant compositions containing magnesium hydroxide filler, Polym. Degrad. Stab. 51 (1996) 235-249.
41. W. Qiu, A. Habenschuss, B. Wunderlich, The phase structures of Nylon 6.6 as studied by temperature-modulated calorimetry and their link to X-ray structure and molecular motion, Polymer 48 (2007) 1641-1650.
42. A.C. Pastor, F. Rodríguez-Reinoso, H. Marsh, M.A. Martínez, Preparation of activated carbon cloths from viscous rayon. Part I. Carbonization procedures, Carbon 37 (1999) 1275-1283.
43. M.R. Islam, M.S.H.K. Tushar, H. Haniu, Production of liquid fuels and chemicals from pyrolysisof Bangladeshi bicycle/rickshaw tire wastes, J. Anal. Appl. Pyrolysis 82 (2008) 96-109.
44. M.F. Laresgoiti, B.M. Caballero, I. de Marco, A. Torres, M.A. Cabrero, M.J. Chomón, Characterization of the liquid products obtained in tyre pyrolysis, J. Anal. Appl. Pyrolysis 71 (2004) 917-934.
45. B. Acevedo, C. Barriocanal, Fuel-oils from co-pyrolysis of scrap tyres with coal and a bituminous waste. Influence of oven configuration, Fuel 125 (2014) 155-163.
46. B. Acevedo, C. Barriocanal, R. Alvarez, Pyrolysis of blends of coal and tyre wastes in a fixed bed reactor and a rotary oven, Fuel 113 (2013) 817-825.
47. T. Yoshioka, G. Grauseb, C. Egerb, W. Kaminsky, A. Okuwaki, Pyrolysis of poly(ethylene terephthalate) in a fluidised bed plant, Polym. Degrad. Stab. 86 (2004) 499-504.
48. M. Herrera, G. Matuschek, A. Kettrup, Main products and kinetics of the thermal degradation of polyamides, Chemosphere 42 (2001) 601-607.
49. A. Ballistreri, D. Garozzo, M. Giuffrida, G. Impallomeni, G. Montaudo, Primary thermal decomposition processes in aliphatic polyamides, Polym. Degrad. Stab. 23 (1988) 25-41.
50. C. Samperi, R. Puglisi, G. Alicata, Montaudo, Thermal degradation of poly(ethylene terephthalate) at the processing temperature, Polym. Degrad. Stab. 83 (2004) 3-10.
51. Q. Lu, X. Yanga, Ch. Donga, Z. Zhanga, X. Zhanga, X. Zhub, Influence of pyrolysis temperature and time on the cellulose fast pyrolysis products: analytical Py-GC/MS study, J. Anal. Appl Pyrol. 92 (2011) 430-438.