A novel three-dimensional sulfur/graphene/carbon nanotube composite prepared by a hydrothermal co-assembling route as binder-free cathode for lithium–sulfur batteries

Journal of Nanoparticle Research

Volumn 17, Issue 1, 2015, Pages

  Yuan, Guanghui ^a,b   Wang, Gang ^a   Wang, Hui ^a   Bai, Jintao ^a  

^a NORTHWEST UNIVERSITY   (China)

^b ANKANG UNIVERSITY   (China)

Author keywords

A hydrothermal co assembling route; Binder free cathode; Energy storage; Lithium sulfur battery; Sulfur graphene carbon nanotube composite

Indexed keywords

CARBON NANOTUBES; CATHODES; ELECTROLYTES; ENERGY STORAGE; FOAMS; LITHIUM; SULFUR;

A HYDROTHERMAL CO-ASSEMBLING ROUTE; BINDER FREE; CONDUCTIVE ADDITIVES; ELECTROCHEMICAL PERFORMANCE; MANUFACTURING PROCESS; NANOTUBE COMPOSITES; SPECIFIC DISCHARGE CAPACITY; THREE-DIMENSIONAL ARCHITECTURE;

LITHIUM BATTERIES;

CARBON NANOTUBE; GRAPHENE; LITHIUM; NICKEL; SULFUR;

ARTICLE; CRYSTAL STRUCTURE; CYCLIC POTENTIOMETRY; DIFFUSION; ELECTRIC BATTERY; ELECTRIC CONDUCTIVITY; ELECTROCHEMICAL ANALYSIS; ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY; ELECTRODE; FOAM; ION TRANSPORT; PRIORITY JOURNAL; SCANNING ELECTRON MICROSCOPY; SURFACE PROPERTY; TRANSMISSION ELECTRON MICROSCOPY; X RAY DIFFRACTION;

EID: 84921340641     PISSN: 13880764     EISSN: 1572896X     Source Type: Journal    
DOI: 10.1007/s11051-014-2789-0     Document Type: Article

References (43)

1. Ahn W, Kim KB, Jung KN, Shin KH, Jin CS (2012) Synthesis and electrochemical properties of a sulfur-multi walled carbon nanotubes composite as a cathode material for lithium sulfur batteries. J Power Sources 202:394–399
2. Aurbach D (2003) Electrode–solution interactions in Li-ion batteries: a short summary and new insights. J Power Sour 119:497–503
3. 2 and Li–S batteries with high energy storage. Nat Mater 11:19–29
4. 2S–C composites as cathode material for high-energy lithium/sulfur batteries. Nano Lett 12:6474–6479
5. Cakan RD, Morcrette M, Nouar F, Davoisne C, Devic T, Gonbeau D, Dominko R, Serre C, Ferey G, Tarascon JM (2011) Cathode composites for Li–S batteries via the use of oxygenated porous architectures. J Am Chem Soc 133:16154–16160
6. Chen SR, Zhai YP, Xu GL, Jiang YX, Zhao D, Li JT, Huang L, Sun SG (2011) Ordered mesoporous carbon/sulfur nanocomposite of high performances as cathode for lithium–sulfur battery. Electrochim Acta 26:9549–9555
7. Chen SQ, Huang XD, Liu H, Sun B, Yeoh WK, Li KF, Zhang JQ, Wang GX (2014) 3D hyperbranched hollow carbon nanorod architectures for high-performance lithium–sulfur batteries. Adv Energy Mater 8:1301761
8. Endo M, Takeuchi K, Hiroka T, Furuta T, Kasai T, Sun X, Kiang CH, Dresselhaus MS (1997) Stacking nature of graphene layers in carbon nanotubes and nanofibres. J Phys Chem Solids 58:1707–1713
9. Evers S, Nazar LF (2013) New approaches for high energy density lithium–sulfur battery cathodes. Acc Chem Res 5:1135–1143
10. Gao XF, Li JY, Guan DS, Yuan C (2014) A scalable graphene sulfur composite synthesis for rechargeable lithium batteries with good capacity and excellent columbic efficiency. ACS Appl Mater Interfaces 6:4154–4159
11. Guo JC, Xu YH, Wang CS (2011) Sulfur-impregnated disordered carbon nanotubes cathode for lithium–sulfur batteries. Nano Lett 11:4288–4294
12. Jayaprakash N, Shen J, Moganty SS, Corona A, Archer LA (2011) Porous hollow carbon@sulfur composites for high-power lithium–sulfur batteries. Angew Chem Int Ed 50:5904–5908
13. Ji L, Rao M, Zheng H, Zhang L, Li Y, Duan W, Guo J, Cairns EJ, Zhang Y (2011) Graphene oxide as a sulfur immobilizer in high performance lithium/sulfur cells. J Am Chem Soc 133:18522–18525
14. Kim J, Lee DJ, Jung HG, Sun YK, Hassoun J, Scrosati B (2013) An advanced lithium–sulfur battery. Adv Funct Mater 23:1076–1080
15. 4 combined with three-dimensional graphene networks. J Nanopart Res 12:1966–1973
16. Li LY, Chen YX, Guo XD, Zhong BH, Zhong YJ (2014) Preparation of sulfur/multiple pore size porous carbon composite via gas–phase loading method for lithium–sulfur batteries. Electrochim Acta 137:411–415
17. Schaufuß AG, Nesbitt HW, Kartio I, Laajalehto K, Bancroft GM, Szargan R (1998) Incipient oxidation of fractured pyrite surfaces in air. J Electron Spectrosc Relat Phenom 96:69–82
18. Schuster J, He G, Mandlmeier B, Yim T, Lee KT, Bein T, Nazar LF (2012) Spherical ordered mesoporous carbon nanoparticles with high porosity for lithium–sulfur batteries. Angew Chem Int Ed 51:3591–3595
19. Song MS, Han SC, Kim HS, Kim JH, Kim KT, Kang YM, Ahn HJ, Dou SX, Lee JY (2004) Effects of nanosized adsorbing material on electrochemical properties of sulfur cathodes for Li/S secondary batteries. J Electrochem Soc 151:A791–A795
20. Stankovich S, Dikin DA, Piner RD, Kohlhaas KA, Kleinhammes A, Jia Y, Wu Y, Nguyen ST, Ruoff RS (2007) Synthesis of graphene-based nanosheets via chemical reduction of exfoliated graphite oxide. Carbon 45:1558–1565
21. Suo L, Hu YS, Li H, Armand M, Chen L (2013) A new class of solvent-in-salt electrolyte for high-energy rechargeable metallic lithium batteries. Nat Commun 4:1481–1489
22. Tang C, Zhang Q, Zhao MQ, Huang JQ, Cheng XB, Tian GL, Peng HJ, Wei F (2014) Nitrogen-doped aligned carbon nanotube/graphene sandwiches: facile catalytic growth on bifunctional natural catalysts and their applications as scaffolds for high-rate lithium–sulfur batteries. Adv Mater 35:6100–6105
23. Wang H, Yang Y, Liang Y, Robinson JT, Li Y, Jackson A, Cui Y, Dai H (2011) Graphene–wrapped sulfur particles as a rechargeable lithium–sulfur battery cathode materi al with high capacity and cycling stability. Nano Lett 11:2644–2647
24. Wang L, Wang D, Zhang FX, Jin J (2013a) Interface chemistry guided long-cycle-life Li–S battery. Nano Lett 13:4206
25. Wang C, Wan W, Chen JT, Zhou HH, Zhang XX, Yuan LX, Huang YH (2013b) Dual core–shell structured sulfur cathode composite synthesized by a one-pot route for lithium sulfur batteries. J Mater Chem A 1:1716–1723
26. Wang W, Li GC, Wang Q, Li GR, Ye SH, Gao XP (2013c) Sulfur-polypyrrole/graphene multi-composites as cathode for lithium/sulfur battery. J Electrochem Soc 160:A805–A810
27. Wang XF, Fang XP, Guo XW, Wang ZX, Chen LQ (2013d) Sulfur in hierarchically pore-structured carbon pillars as cathode material for lithium–sulfur batteries. Electrochim Acta 97:238–243
28. Xin S, Gu L, Zhao NH, Yin YX, Zhou LJ, Guo YG, Wan LJ (2012) Smaller sulfur molecules promise better lithium–sulfur batteries. J Am Chem Soc 134:18510–18513
29. Zhang C, Wu HB, Yuan C, Guo Z, Lou XW (2012a) Confining sulfur in double-shelled hollow carbon spheres for lithium–sulfur batteries. Angew Chem Int Ed 51:9592–9595
30. Zhang YG, Bakenov Z, Zhao Y, Konarov A, Doan TNL, Malik M, Paron T, Chen P (2012b) One-step synthesis of branched sulfur/polypyrrole nanocomposite cathode for lithium rechargeable batteries. J Power Sour 208:1–8
31. Zhang L, Ji L, Glans PA, Zhang Y, Zhu J, Guo J (2012c) Electronic structure and chemical bonding of a graphene oxide–sulfur nanocomposite for use in superior performance lithium–sulfur cells. J Phys Chem Chem Phys 14:13670–13675
32. Zhang YG, Zhao Y, Konarov A, Gosselink D, Soboleski HG, Chen P (2013a) A novel nano-sulfur/polypyrrole/graphene nanocomposite cathode with a dual-layered structure for lithium rechargeable batteries. J Power Sour 241:517–521
33. Zhang YG, Zhao Y, Konarov A, Gosselink D, Li Z, Ghaznavi M, Chen P (2013b) One-pot approach to synthesize PPy@S core-shell nanocomposite cathode for Li/S batteries. J Nanopart Res 10:1–7
34. 0.4O composite cathodes for high performance lithium/sulfur batteries. J Mater Chem A 1:295–301
35. Zhang YG, Zhao Y, Bakenov Z, Babaa MR, Konarov Ding AC, Chen P (2013d) Effect of graphene on sulfur/polyacrylonitrile nanocomposite cathode in high performance lithium/sulfur batteries. J Electrochem Soc 160:A1194–A1198
36. Zhao MQ, Liu XF, Zhang Q, Tian GL, Huang JQ, Zhu WC, Wei F (2010a) Graphene/single-walled carbon nanotube hybrids: one-step catalytic growth and applications for high-rate Li–S batteries. ACS Nano 6:10759–10769
37. Zhao J, Pei S, Ren W, Gao L, Cheng HM (2010b) Efficient preparation of large-area graphene oxide sheets for transparent conductive films. ACS Nano 4:5245–5252
38. Zhao Y, Zhang Y, Bakenov Z, Chen P (2013) Electrochemical performance of lithium gel polymer battery with nanostructured sulfur/carbon composite cathode. Solid State Ionics 234:40–45
39. Zheng SY, Chen Y, Xu Y, Yi F, Zhu Y, Liu Y, Yang J, Wang CS (2013) In situ formed lithium sulfide/microporous carbon cathodes for lithium-ion batteries. ACS Nano 7:10995–11003
40. Zhou GM, Wang DW, Yin LC, Li N, Li F, Cheng HM (2012) Oxygen bridges between NiO nanosheets and graphene for improvement of lithium storage. ACS Nano 6:3214–3223
41. Zhou GM, Yin LC, Wang DW, Li L, Pei SF, Gentle IR, Li F, Cheng HM (2013) Fibrous hybrid of graphene and sulfur nanocrystals for high-performance lithium–sulfur batteries. ACS Nano 7:5367–5375
42. Zhou GM, Pei SF, Li L, Wang DW, Wang SG, Huang K, Yin LC, Li F, Cheng HM (2014) A graphene–pure-sulfur sandwich structure for ultrafast, long-life lithium–sulfur batteries. Adv Mater 26:625–631
43. Zu C, Manthiram A (2013) Hydroxylated graphene–sulfur nanocomposites for high-rate lithium–sulfur batteries. Adv Energy Mater 3:1008–1012