Strong formulation finite element method based on differential quadrature: A survey

Applied Mechanics Reviews

Volumn 67, Issue 2, 2015, Pages

  Tornabene, Francesco ^a   Fantuzzi, Nicholas ^a   Ubertini, Francesco ^a   Viola, Erasmo ^a  

^a UNIVERSITY OF BOLOGNA   (Italy)

Author keywords

[No Author keywords available]

Indexed keywords

DIFFERENTIATION (CALCULUS); SURVEYS;

CO-ORDINATE TRANSFORMATION; COMPUTATIONAL DOMAINS; DIFFERENTIAL QUADRATURE; DIFFERENTIAL QUADRATURE METHODS; DISPLACEMENTS AND STRESS; ELEMENT CONNECTIVITY; NUMERICAL INVESTIGATIONS; STRONG FORMULATIONS;

FINITE ELEMENT METHOD;

EID: 84921326503     PISSN: 00036900     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.4028859     Document Type: Article

References (550)

1. Finlayson, B. A., and Scriven, L. E., 1966, "The Method of Weighted Residual: A Review," ASME Appl. Mech. Rev., 19, pp. 735-748.
2. Bert, C. W., and Malik, M., 1996, "Differential Quadrature Method in Computational Mechanics," ASME Appl. Mech. Rev., 49(1), pp. 1-27.
3. Bellman, R., and Casti, J., 1971, "Differential Quadrature and Long-Term Integration," J. Math. Anal. Appl., 34(2), pp. 235-238.
4. Bellman, R., Kashef, B. G., and Casti, J., 1972, "Differential Quadrature: A Technique for the Rapid Solution of Nonlinear Partial Differential Equations," J. Comput. Phys., 10(1), pp. 40-52.
5. Bellman, R., and Roth, R. S., 1986, Methods in Approximation, D. Reidel Publishing Company, Dordrecht, Holland.
6. Villadsen, J. V., and Stewart, W. E., 1967, "Solution of Boundary-Value Problems by Orthogonal Collocation," Chem. Eng. Sci., 22(11), pp. 1483-1501.
7. Orszag, S. A., 1969, "Numerical Methods for the Simulation of Turbulence," Phys. Fluids, 12(12), pp. 250-257.
8. Villadsen, J., 1978, Solution of Differential Equation Models by Polynomial Approximation (Physical & Chemical Engineering Science), Prentice Hall, Englewood Cliffs, NJ.
9. Askey, R., 1975, "Orthogonal Polynomials and Special Functions," Virginia Polytechnic Institute (21st Edition of CBMS-NSF Regional Conference Series in Applied Mathematics, Vol. 21, National Science Foundation, Arrowsmith, Bristol, England, pp. 1-110.
10. Gottlieb, D., and Orszag, S. A., 1977, "Numerical Analysis of Spectral Methods. Theory and Applications," Old Dominion University, Aug. 2-6 (26th edition of CBMS-NSF Regional Conference Series in Applied Mathematics, Vol. 26, printed for the SIAM by Arrowsmith, Bristol England, pp. 1-172).
11. Funaro, D., 1992, Polynomial Approximation of Differential Equations, Springer-Verlag, Berlin.
12. Boyd, J. P., 2001, Chebyshev and Fourier Spectral Methods, Dover Publications, Mineola, NY.
13. Canuto, C., Hussaini, M. Y., Quarteroni, A., and Zang, T. A., 2006, Spectral Method. Fundamentals in Single Domains, Springer, Berlin.
14. Quarteroni, A., and Valli, A., 2008, Numerical Approximation of Partial Differential Equations, Springer, Berlin.
15. Shen, J., Tang, T., and Wang, L.-L., 2011, Spectral Methods. Algorithms, Analysis and Applications, Springer, Berlin.
16. Trefethen, L. N., 2000, Spectral Methods in MATLAB, SIAM, Philadelphia, PA.
17. Hughes, T. J. R., 1987, The Finite Element Method, Prentice-Hall, Englewood Cliffs, NJ.
18. Kardestuncer, H., 1987, Finite Element Handbook, McGraw Hill, New York, NY.
19. Zienkiewicz, O. C., 1995, "Origins, Milestones and Directions of the Finite Element Method-A Personal View," Arch. Comput. Methods Eng., 2(1), pp. 1-48.
20. Kythe, P. K., and Schaferkotter, M. R., 2000, Handbook of Computational Methods for Integration, CRC Press, Boca Raton, FL.
21. Reddy, J. N., 2006, An Introduction to the Finite Element Method, 3rd ed., McGraw Hill, Singapore.
22. Zienkiewicz, O. C., Taylor, R. L., and Zhu, J. Z., 2013, The Finite Element Method: Its Basis and Fundamentals, 7th ed., Butterworth-Heinemann, Oxford, UK.
23. Quan, J. R., 1988, "A Unified Approach for Solving Nonlinear Partial Differential Equations in Chemical Engineering Applications," Master thesis, University of Nebraska-Lincoln, Lincoln, NE.
24. Civan, F., 1978, "Solution of Transport Phenomena Type Models by the Method of Differential Quadratures as Illustrated on the LNG Vapor Dispersion Process Modeling," Ph.D. thesis, University of Oklahoma, Norman, OK.
25. Civan, F., and Sliepcevich, C. M., 1983, "Application of Differential Quadrature to Transport Processes," J. Math. Anal. Appl., 93(1), pp. 206-221.
26. Civan, F., and Sliepcevich, C. M., 1983, "Solution of the Poisson Equation by Differential Quadrature," Int. J. Numer. Methods Eng., 19, pp. 711-724.
27. Civan, F., and Sliepcevich, C. M., 1984, "Differential Quadrature for Multi-Dimensional Problems," J. Math. Anal. Appl., 101(2), pp. 423-443.
28. Civan, F., and Sliepcevich, C. M., 1984, "On the Solution of the Thomas-Fermi Equation by Differential Equation," J. Comput. Phys., 56(2), pp. 343-348.
29. Civan, F., and Sliepcevich, C. M., 1985, "Application of Differential Quadrature in Solution of Pool Boiling in Cavities," Proc. Okla. Acad. Sci., 65, pp. 73-78.
30. Mingle, J. O., 1973, "Computational Considerations in Non-Linear Diffusion," Int. J. Numer. Methods Eng., 7(2), pp. 103-116.
31. Mingle, J. O., 1977, "The Method of Differential Quadrature for Transient Nonlinear Diffusion," J. Math. Anal. Appl., 60(3), pp. 559-569.
32. Finlayson, B. A., 1980, Nonlinear Analysis in Chemical Engineering, McGraw-Hill, New York.
33. Quan, J. R., and Chang, C. T., 1989, "New Insights in Solving Distributed System Equations by the Quadrature Method-I. Analysis," Comput. Chem. Eng., 13(7), pp. 779-788.
34. Quan, J. R., and Chang, C. T., 1989, "New Insights in Solving Distributed System Equations by the Quadrature Method-II. Numerical Experiments," Comput. Chem. Eng., 13(9), pp. 1017-1024.
35. Bert, C. W., Jang, S. K., and Striz, A. G., 1988, "Two New Approximate Methods for Analyzing Free Vibration of Structural Components," AIAA J., 26(5), pp. 612-618.
36. Bert, C. W., Jang, S. K., and Striz, A. G., 1989, "Nonlinear Bending Analysis of Orthotropic Rectangular Plates by the Method of Differential Quadrature," Comput. Mech., 5(2-3), pp. 217-226.
37. Bert, C. W., and Malik, M., 1996, "The Differential Quadrature Method for Irregular Domains and Application for Plate Vibration," Int. J. Mech. Sci., 38(6), pp. 589-606.
38. Bert, C. W., and Malik, M., 1996, "Free Vibration Analysis of Tapered Rectangular Plates by Differential Quadrature Method: A Semi-Analytical Approach," J. Sound Vib., 190(1), pp. 41-63.
39. Bert, C. W., and Malik, M., 1996, "Free Vibration Analysis of Thin Cylindrical Shells by the Differential Quadrature Method," ASME J. Pressure Vessel Technol., 118(1), pp. 1-12.
40. Bert, C. W., Wang, X., and Striz, A. G., 1993, "Differential Quadrature for Static and Free Vibration Analyses of Anisotropic Plates," Int. J. Solids Struct., 30(13), pp. 1737-1744.
41. Bert, C. W., Wang, X., and Striz, A. G., 1994, "Static and Free Vibrational Analysis of Beams and Plates by Differential Quadrature Method," Acta Mech., 102(1-4), pp. 11-24.
42. Bert, C. W., Wang, X., and Striz, A. G., 1994, "Convergence of DQ Method in the Analysis of Anisotropic Plates," J. Sound Vib., 170(1), pp. 140-144.
43. Chen, W. L., 1994, "A New Approach for Structural Analysis. The Quadrature Element Method," Ph.D. thesis, University of Oklahoma, Norman, OK.
44. Chen, W. L., Striz, A. G., and Bert, C. W., 1997, "A New Approach to the Differential Quadrature Method for Fourth-Order Equations," Int. J. Numer. Methods Eng., 40, pp. 1941-1956.
45. Chen, W. L., Striz, A. G., and Bert, C. W., 2000, "High Accuracy Plane Stress and Plate Element in the Quadrature Element Method," Int. J. Solids Struct., 37(4), pp. 627-647.
46. Farsa, J., 1991, "Development of a Differential Quadrature Technique for the Fundamental Frequency Analysis of Tapered, Orthotropic, Anisotropic and Laminated Thin Plates," Ph.D. thesis, University of Oklahoma, Norman, OK.
47. Jang, S. K., 1987, "Application of Differential Quadrature to the Analysis of Structural Components," Ph.D. thesis, University of Oklahoma, Norman, OK.
48. Jang, S. K., Bert, C. W., and Striz, A. G., 1989, "Application of Differential Quadrature to Static Analysis of Structural Components," Int. J. Numer. Methods Eng., 28(3), pp. 561-577.
49. Kang, K., and Bert, C. W., 1997, "Flexural-Torsional Buckling Analysis of Arches With Warping Using DQM," Eng. Struct., 19(3), pp. 247-254.
50. Kang, K., Bert, C. W., and Striz, A. G., 1995, "Vibration Analysis of Shear Deformable Circular Arches by the Differential Quadrature Method," J. Sound Vib., 181(2), pp. 353-360.
51. Kang, K. J., Bert, C. W., and Striz, A. G., 1996, "Vibration and Buckling Analysis of Circular Arches Using DQM," Comput. Struct., 60(3), pp. 49-57.
52. Kang, K., Bert, C.W., and Striz, A. G., 1996, "Vibration Analysis of Horizontally Curved BeamsWith Warping Using DQM," J. Struct. Eng., 122(6), pp. 657-662.
53. Malik, M., 1994, "Differential Quadrature Method in Computational Mechanics. New Developments and Applications," Ph.D. thesis, University of Oklahoma, Norman, OK.
54. Malik, M., and Bert, C. W., 2000, "Vibration Analysis of Plates With Curvilinear Quadrilateral Platforms by DQM Using Blending Functions," J. Sound Vib., 230(4), pp. 949-954.
55. Striz, A. G., Chen, W. L., and Bert, C. W., 1994, "Static Analysis of Structures by the Quadrature Element Method (QEM)," Int. J. Solids Struct., 31(20), pp. 2807-2818.
56. Striz, A. G., Chen, W. L., and Bert, C. W., 1997, "Free Vibration of Plates by the High Accuracy Element Method," J. Sound Vib., 202(5), pp. 689-702.
57. Striz, A. G., Wang, X., and Bert, C. W., 1995, "Harmonic Differential Quadrature Method and Applications to Analysis of Structural Components," Acta Mech., 111(1-2), pp. 85-94.
58. Wang, X., and Bert, C. W., 1993, "A New Approach in Applying Differential Quadrature to Static and Free Vibrational Analyses of Beams and Plates," J. Sound Vib., 162(3), pp. 566-572.
59. Wang, X., Striz, A. G., and Bert, C. W., 1993, "Free Vibration Analysis of Annular Plates by the DQ Method," J. Sound Vib., 164(1), pp. 173-175.
60. Wang, X., Bert, C. W., and Striz, A. G., 1993, "Differential Quadrature Analysis of Deflection, Buckling and Free Vibration of Beams and Rectangular Plates," Comput. Struct., 48(3), pp. 473-479.
61. Wang, X., Bert, C. W., and Striz, A. G., 1994, "Buckling and Vibration Analysis of Skew Plates by Differential Quadrature Method," AIAA J., 32(4), pp. 886-889.
62. Shu, C., 1991, "Generalized Differential-Integral Quadrature and Application to the Simulation of Incompressible Viscous Flows Including Parallel Computation," Ph.D. thesis, University of Glasgow, UK.
63. Shu, C., and Richards, B. E., 1992, "Parallel Simulation of Incompressible Viscous Flows by Generalized Differential Quadrature," Comput. Syst. Eng., 3(1-4), pp. 271-281.
64. Shu, C., and Richards, B. E., 1992, "Application of Generalized Differential Quadrature to Solve Two-Dimensional Incompressible Navier-Stokes Equations," Int. J. Numer. Methods Fluids, 15(7), pp. 791-798.
65. Kukreti, A., Farsa, J., and Bert, C. W., 1992, "Fundamental Frequency of Tapered Plates by Differential Quadrature," J. Eng. Mech., 118(6), pp. 1221-1238.
66. Civan, F., 1992, "Letter to Editor. Comment on 'Application of Generalized Quadrature to Solve Two-Dimensional Incompressible Navier-Stokes Equations,' by C. Shu and B.E. Richards," Int. J. Numer. Method Fluids, 17(10), pp. 921-922.
67. Chen, W., and Yu, Y., 1993, "Calculation and Analysis of Weighting Coefficient Matrices in Differential Quadrature Method," Proceedings of the 1st Pan-Pacific Conference Computer Engineering, Seoul, Korea, Nov. 1-5, B.M. Kwak and M. Tanaka, Elsevier, Amsterdam, Netherlands, pp. 157-162.
68. Chen, W., and Yu, Y., 1993, "Differential Quadrature Method for High Order Boundary Value Problems," Proceedings of the 1st Pan-Pacific Conference Computer Engineering, Seoul, Korea, Nov. 1-5, B.M. Kwak and M. Tanaka, Elsevier, Amsterdam, The Netherlands, pp. 163-168.
69. Civan, F., 1994, "Rapid and Accurate Solution of Reactor Models by the Quadrature Method," Comput. Chem. Eng., 18(10), pp. 1005-1009.
70. Shu, C., Chew, Y. T., and Richards, B. E., 1995, "Generalized Differential and Integral Quadrature and Their Application to Solve Boundary Layer Equations," Int. J. Numer. Methods Fluids, 21(9), pp. 723-733.
71. Gutierrez, R. H., and Laura, P. A. A., 1995, "Analysis of Vibrating, Thin, Rectangular Plates With Point Supports by the Method of Differential Quadrature," Ocean Eng., 22(1), pp. 101-103.
72. Gutierrez, R. H., and Laura, P. A. A., 1995, "Vibrations of Non-Uniform Rings Studied by Means of the Differential Quadrature Method," J. Sound Vib., 185(3), pp. 507-513.
73. Laura, P. A. A., and Gutierrez, R. H., 1995, "Analysis of Vibrating Circular Plates of Nonuniform Thickness by the Method of Differential Quadrature," Ocean Eng., 22(1), pp. 97-100.
74. Lam, K. Y., and Loy, C. T., 1995, "Free Vibrations of a Rotating Multi-Layered Cylindrical Shell," Int. J. Solids Struct., 32(5), pp. 647-663.
75. Shu, C., Chew, Y. T., Khoo, B. C., and Yeo, K. S., 1995, "Application of GDQ Scheme to Simulate Incompressible Viscous Flows Around Complex Geometries," Mech. Res. Commun., 22(4), pp. 319-325.
76. Wang, X., Yang, J., and Xiao, J., 1995, "On Free Vibration Analysis of Circular Annular Plates With Non-Uniform Thickness by the Differential Quadrature Method," J. Sound Vib., 184(3), pp. 547-551.
77. Shu, C., 1996, "Free Vibration Analysis of Composite Laminated Conical Shells by Generalized Differential Quadrature," J. Sound Vib., 194(4), pp. 587-604.
78. Shu, C., 1996, "An Efficient Approach for Free Vibration Analysis of Conical Shells," Int. J. Mech. Sci., 38(8-9), pp. 935-949.
79. Shu, C., Khoo, B. C., Chew, Y. T., and Yeo, K. S., 1996, "Numerical Studies of Unsteady Boundary Layer Flows Past an Impulsively Started Circular Cylinder by GDQ and GIQ Approaches," Comput. Methods Appl. Mech. Eng., 135(3-4), pp. 229-241.
80. Chen, W., 1996, "Differential Quadrature Method and its Applications in Engineering," Ph.D. thesis, Shanghai Jiao Tong University, Shanghai, China.
81. Chen, W., Wang, X., and Zhong, T., 1996, "The Structures of the Weighting Coefficient Matrices of the Harmonic Differential Quadrature and Its Applications," Commun. Numer. Methods Eng., 12, pp. 455-459.
82. Chen, W., Zhong, T. X., and Liang, S. P., 1997, "On the DQ Analysis of Geometrically Non-Linear Vibration of Immovably Simply-Supported Beams," J. Sound Vib., 206(5), pp. 745-748.
83. Lam, K. Y., and Hua, L., 1997, "Vibration Analysis of a Rotating Truncated Circular Conical Shell," Int. J. Solids Struct., 34(17), pp. 2183-2197.
84. Bellomo, N., 1997, "Nonlinear Models and Problems in Applied Sciences From Differential Quadrature to Generalized Collocation Methods," Math. Comput. Model., 26(4), pp. 13-34.
85. Shu, C., and Du, H., 1997, "Implementation of Clamped and Simply Supported Boundary Conditions in the GDQ Free Vibration Analysis of Beams and Plates," Int. J. Solids Struct., 34(7), pp. 819-835.
86. Shu, C., and Du, H., 1997, "A Generalized Approach for Implementation General Boundary Conditions in the GDQ Free Vibration Analysis of Plates," Int. J. Solids Struct., 34(7), pp. 837-846.
87. Shu, C., and Du, H., 1997, "Free Vibration Analysis of Laminated Composite Cylindrical Shells by DQM," Compos. Part B, 28(3), pp. 267-274.
88. Shu, C., and Chew, Y. T., 1997, "Fourier Expansion-Based Differential Quadrature and Its Application to Helmholtz Eigenvalue Problems," Commun. Numer. Methods Eng., 13(8), pp. 643-653.
89. Shu, C., Chew, Y. T., and Liu, Y., 1997, "An Efficient Approach for Numerical Simulation of Flows in Czochralski Crystal Growth," J. Cryst. Growth, 181(4), pp. 427-436.
90. Shu, C., and Xue, H., 1997, "Explicit Computation of Weighting Coefficients in the Harmonic Differential Quadrature," J. Sound Vib., 204(3), pp. 549-555.
91. Bonzani, I., 1997, "Solution of Nonlinear Evolution Problems by Parallelized Collocation-Interpolation Methods," Comput. Math. Appl., 34(12), pp. 71-79.
92. Chen, W., Zhong, T. X., and Shu, C., 1998, "Lyapunov Formulation for Efficient Solution of the Poisson and Convection-Diffusion Equations by the Differential Quadrature Method," J. Comput. Phys., 141(1), pp. 78-84.
93. Tomasiello, S., 1998, "Differential Quadrature Method: Application to Initial-Boundary-Value Problems," J. Sound Vib., 218(4), pp. 573-585.
94. Shu, C., and Xue, H., 1998, "Comparison of Two Approaches for Implementing Stream Function Boundary Conditions in DQ Simulation of Natural Convection in a Square Cavity," Int. J. Heat Fluid Flow, 19(1), pp. 59-68.
95. Shu, C., Yeo, K. S., and Yao, Q., 1998, "On the Performance of Three Iterative Methods for Solution of GDQ Algebraic Equations," Comput. Methods Appl. Mech. Eng., 167(1-2), pp. 1-15.
96. Shu, C., Chew, Y. T., and Liu, Y., 1998, "Different Interface Approximations in Multi-Domain GDQ Simulation of Czochralski Bulk Flows," Int. J. Numer. Methods Heat Fluid Flow, 8(4), pp. 424-444.
97. Shu, C., and Chew, Y. T., 1998, "On the Equivalence of Generalized Differential Quadrature and Highest Order Finite Difference Scheme," Comput. Methods Appl. Mech. Eng., 155(3-4), pp. 249-260.
98. Wang, X., Wang, Y.-L., and Chen, R.-B., 1998, "Static and Free Vibrational Analysis of Rectangular Plates by the Differential Quadrature Element Method," Commun. Numer. Methods Eng., 14, pp. 1133-1141.
99. Liu, F. L., and Liew, K. M., 1998, "Static Analysis of Reissner-Mindlin Plates by Differential Quadrature Element Method," ASME J. Appl. Mech., 65(3), pp. 705-710.
100. Liu, F. L., and Liew, K. M., 1999, "Differential Quadrature Element Method for Static Analysis of Reissner-Mindlin Polar Plates," Int. J. Solids Struct., 36(33), pp. 5101-5123.
101. Liu, F. L., and Liew, K. M., 1999, "Free Vibration Analysis of Mindlin Sector Plates: Numerical Solutions by Differential Quadrature Method," Comput. Methods Appl. Mech. Eng., 177(1-2), pp. 77-92.
102. Liu, F. L., and Liew, K. M., 1999, "Differential Quadrature Element Method: A New Approach for Free Vibration Analysis of Polar Mindlin Plates Having Discontinuities," Comput. Methods Appl. Mech. Eng., 179(3-4), pp. 407-423.
103. Liu, F. L., and Liew, K. M., 1999, "Analysis of Vibrating Thick Rectangular Plates With Mixed Boundary Constraints Using Differential Quadrature Element Method," J. Sound Vib., 225(5), pp. 915-934.
104. Liu, F. L., and Liew, K. M., 1999, "Vibration Analysis of Discontinuous Mindlin Plates by Differential Quadrature Element Method," ASME J. Vib. Acoust., 121(2), pp. 204-208.
105. Bonzani, I., 1999, "Domain Decomposition and Discretization of Continuous Mathematical Models," Comput. Math. Appl., 38(11-12), pp. 79-88.
106. Shu, C., and Xue, H., 1999, "Solution of Helmholtz Equation by Differential Quadrature Method," Comput. Methods Appl. Mech. Eng., 175(1-2), pp. 203-212.
107. Shu, C., and Chew, Y. T., 1999, "Application of Multi-Domain GDQ Method to Analysis of Waveguides With Rectangular Boundaries," PIER, 21, pp. 1-19.
108. Shu, C., and Chew, Y. T., 1999, "Application of Multi-Domain GDQ Method to Analysis of Waveguides With Rectangular Boundaries," J. Electromagn. Waves Appl., 13(2), pp. 223-225.
109. Lam, K. Y., and Qian, W., 1999, "Vibration of Thick Rotating Laminated Composite Cylindrical Shells," J. Sound Vib., 225(3), pp. 483-501.
110. Shu, C., 1999, "Application of Differential Quadrature Method to Simulate Natural Convection in a Concentric Annulus," Int. J. Numer. Methods Fluids, 30(8), pp. 977-993.
111. Shu, C., and Wang, C. M., 1999, "Treatment of Mixed and Nonuniform Boundary Conditions in GDQ Vibration Analysis of Rectangular Plates," Eng. Struct., 21(2), pp. 125-134.
112. Shu, C., and Chen, W., 1999, "On Optimal Selection of Interior Points for Applying Discretized Boundary Conditions in DQ Vibration Analysis of Beams and Plates," J. Sound Vib., 222(2), pp. 239-257.
113. Ng, T. Y., Li, H., Lam, K. Y., and Loy, C. T., 1999, "Parametric Instability of Conical Shells by the Generalized Differential Quadrature Method," Int. J. Numer. Methods Eng., 44, pp. 819-837.
114. Bert, C. W., and Malik, M., 2001, "Letters to the Editor. Comments on 'Differential Quadrature Method for Vibration Analysis of Shear Deformable Annular Sector Plates'," J. Sound Vib., 239(5), pp. 1073-1074.
115. Shu, C., 2000, Differential Quadrature and Its Application in Engineering, Springer, London.
116. Carey, G. F., and Finlayson, B. A., 1974, "Orthogonal Collocation on Finite Elements," Chem. Eng. Sci., 30(5-6), pp. 587-596.
117. Orszag, S. A., 1980, "Spectral Methods for Problems in Complex Geometries," J. Comput. Phys., 37(1), pp. 70-92.
118. Metivet, B., and Morchoisne, Y., 1982, "Multi-Domain Spectral Technique for Viscous Flow Calculations," Proceedings of the 4th GAMM Conference Numerical Methods Fluid Mechanics, Paris, October, NNFM, October, Birkhauser Verlag, Basel, Vol. 5, pp. 207-219.
119. Patera, A. T., 1984, "A Spectral Element Method for Fluid Dynamics: Laminar Flow in a Channel Expansion," J. Comput. Phys., 54(3), pp. 468-488.
120. Canuto, C., Hussaini, M. Y., Quarteroni, A., and Zang, T. A., 2007, Spectral Methods. Evolution to Complex Geometries and Applications to Fluid Dynamics, Springer, Berlin.
121. Ostachowicz, W., Kudela, P., Krawczuk, M., and Zak, A., 2011, Guided Waves in Structures for SHM. The Time-Domain Spectral Element Method, Wiley, Chichester, West Sussex, UK.
122. Franciosi, C., and Tomasiello, S., 2004, "A Modified Quadrature Element Method to Perform Static Analysis of Structures," Int. J. Mech. Sci., 46(6), pp. 945-959.
123. Franciosi, C., and Tomasiello, S., 2007, "Static Analysis of a Bickford Beam by Means of the DQEM," Int. J. Mech. Sci., 49(1), pp. 122-128.
124. Xing, Y., and Liu, B., 2009, "High-Accuracy Differential Quadrature Finite Element Method and Its Application to Free Vibrations of Thin Plate With Curvilinear Domain," Int. J. Numer. Methods Eng., 80(13), pp. 1718-1742.
125. Zhong, H.-Z., and Yu, T., 2009, "A Weak Form Quadrature Element Method for Plane Elasticity Problems," Appl. Math. Model., 33(10), pp. 3801-3814.
126. Xing, Y., Liu, B., and Liu, G., 2010, "A Differential Quadrature Finite Element Method," Int. J. Appl. Mech., 2(1), pp. 207-227.
127. Xing, Y., and Liu, B., 2010, "A Differential Quadrature Analysis of Dynamic and Quasi-Static Magneto-Thermo-Elastic Stresses in a Conducting Rectangular Plate Subjected to an Arbitrary Variation of Magnetic Field," Int. J. Eng. Sci., 48(12), pp. 1944-1960.
128. Zhong, H.-Z., and Wang, Y., 2010, "Weak Form Quadrature Element Analysis of Bickford Beams," Eur. J. Mech. A-Solid, 29(5), pp. 851-858.
129. Zhong, H.-Z., Pan, C.-L., and Yu, H., 2011, "Buckling Analysis of Shear Deformable Plates Using the Quadrature Element Method," Appl. Math. Model., 35(10), pp. 5059-5074.
130. Xiao, N., and Zhong, H.-Z., 2012, "Non-Linear Quadrature Element Analysis of Planar Frames Based on Geometrically Exact Beam Theory," Int. J. Nonlinear Mech., 47(5), pp. 481-488.
131. He, R., and Zhong, H.-Z., 2012, "Large Deflection Elasto-Plastic Analysis of Frames Using the Weak-Form Quadrature Element Method," Finite Elem. Anal. Des., 50, pp. 125-133.
132. Zhong, H.-Z., and Yue, Z. G., 2012, "Analysis of Thin Plates by the Weak Form Quadrature Element Method," Sci. China Phys. Mech. Astron., 55(5), pp. 861-871.
133. Liu, B., Xing, Y. F., Eisenberger, M., and Ferreira, A. J. M., 2014, "Thickness-Shear Vibration Analysis of Rectangular Quartz Plates by a Numerical Extended Kantorovich Method," Compos. Struct., 107, pp. 429-435.
134. Wang, Y., Wang, X., and Zhou, Y., 2004, "Static and Free Vibration Analysis of Rectangular Plates by the New Version of the Differential Quadrature Element Method," Int. J. Numer. Methods Eng., 59(9), pp. 1207-1226.
135. Wu, X., and Shen, Y., 2004, "Differential Quadrature Domain Decomposition Method for a Class of Parabolic Equations," Comput. Math. Appl., 48(1-2), pp. 1819-1832.
136. Wu, T. Y., and Liu, G. R., 1999, "A Differential Quadrature as a NumericalMethod to Solve Differential Equations," Comput.Mech., 24(3), pp. 197-205.
137. Wu, T. Y., and Liu, G. R., 2000, "Axisymmetric Bending Solution of Shells of Revolution by the Generalized Differential Quadrature Rule," Int. J. Pressure Vessels Piping, 77(4), pp. 149-157.
138. Liu, G. R., and Wu, T. Y., 2001, "Vibration Analysis of Beams Using the Generalized Differential Quadrature Rule and Domain Decomposition," J. Sound Vib., 246(3), pp. 461-481.
139. Liu, G. R., and Wu, T. Y., 2001, "In-Plane Vibration Analyses of Circular Arches by the Generalized Differential Quadrature Rule," Int. J. Mech. Sci., 43(11), pp. 2597-2611.
140. Liu, G. R., and Wu, T. Y., 2001, "Application of Generalized Differential Quadrature Rule in Blasius and Osanger Equations," Int. J. Numer. Methods Eng., 52(9), pp. 1013-1027.
141. Wu, T. Y., and Liu, G. R., 2001, "Free Vibration Analysis of Circular Plates With Variable Thickness by the Generalized Differential Quadrature Rule," Int. J. Solid Struct., 38(44-45), pp. 7967-7980.
142. Wu, T. Y., and Liu, G. R., 2001, "The Generalized Differential Quadrature Rule for Fourth-Order Differential Equations," Int. J. Numer. Methods Eng., 50(8), pp. 1907-1929.
143. Liu, G. R., and Wu, T. Y., 2002, "Multipoint Boundary Value Problems by Differential Quadrature Method," Math. Comput. Model., 35(1-2), pp. 215-227.
144. Liu, G. R., and Wu, T. Y., 2002, "Differential Quadrature Solutions of Eighth-Order Boundary-Value Differential Equations," J. Comput. Appl. Math., 145(1), pp. 223-235.
145. Wu, T. Y., Wang, Y. Y., and Liu, G. R., 2002, "Free Vibration Analysis of Circular Plates Using Generalized Differential Quadrature Rule," Comput. Methods Appl. Mech. Eng., 191(46), pp. 5265-5380.
146. Wu, T. Y., Liu, G. R., and Wang, Y. Y., 2003, "Application of the Generalized Differential Quadrature Rule to Initial-Boundary-Value Problems," J. Sound Vib., 264(4), pp. 883-891.
147. Liu, F. L., 2000, "Rectangular Thick Plates on Winkler Foundation: Differential Quadrature Element Solution," Int. J. Solid Struct., 37(12), pp. 1743-1763.
148. Karami, G., and Malekzadeh, P., 2002, "A New Differential Quadrature Methodology for Beam Analysis and the Associated Differential Quadrature Element Method," Comput. Meth. Appl. Mech. Eng., 191(32), pp. 3509-3526.
149. Karami, G., and Malekzadeh, P., 2003, "Application of a New Differential Quadrature Methodology for Free Vibration Analysis of Plates," Int. J. Numer. Methods Eng., 56(6), pp. 847-868.
150. Karami, G., and Malekzadeh, P., 2003, "An Efficient Differential Quadrature Methodology for Free Vibration Analysis of Arbitrary Straight-Sided Quadrilateral Thin Plate," J. Sound Vib., 263(2), pp. 415-442.
151. Wang, X., Liu, F., Wang, X., and Gan, L., 2005, "New Approaches in Application of Differential Quadrature Method to Fourth-Order Differential Equations," Commun. Numer. Methods Eng., 21(2), pp. 61-71.
152. Lam, S. S. E., 1993, "Application of the Differential Quadrature Method to Two-Dimensional Problems With Arbitrary Geometry," Comput. Struct., 47(3), pp. 459-464.
153. Liu, G. R., and Wu, T. Y., 2001, "Vibration Analysis of Beams Using the Generalized Differential Quadrature Rule and Domain Decomposition," J. Sound Vib., 246(3), pp. 461-481.
154. Civalek, O., 2008, "Discrete Singular Convolution Methodology for Free Vibration and Stability Analyses of Arbitrary Straight-Sided Quadrilateral Plates," Commun. Numer. Methods Eng., 24(11), pp. 1475-1495.
155. Civalek, O., 2009, "A Four-Node Discrete Singular Convolution for Geometric Transformation and Its Application to Numerical Solution of Vibration Problem of Arbitrary Straight Sided Quadrilateral Plates," Appl. Math. Modell., 33(1), pp. 300-314.
156. Civalek, O., and Ozturk, B., 2010, "Vibration Analysis of Plates With Curvilinear Quadrilateral Domains by Discrete Singular Convolution Method," Struct. Eng. Mech., 36(3), pp. 279-299.
157. Liew, K. M., and Han, J. B., 1997, "A Four-Node Differential Quadrature Method for Straight Sided Quadrilateral Reissner/Mindlin Plates," Commun. Numer. Methods Eng., 13, pp. 73-81.
158. Han, J. B., and Liew, K. M., 1997, "An Eight-Node Curvilinear Differential Quadrature Formulation for Reissner/Mindlin Plates," Comput. Methods Appl. Mech. Eng., 141(3-4), pp. 265-280.
159. Han, J. B., and Liew, K. M., 1999, "Static Analysis of Mindlin Plates: The Differential Quadrature Element Method (DQEM)," Comput. Methods Appl. Mech. Eng., 177(1-2), pp. 51-75.
160. Shu, C., Chen, W., and Du, H., 2000, "Free Vibration Analysis of Curvilinear Quadrilateral Plates by the Differential Quadrature Method," J. Comput. Phys., 163(2), pp. 452-466.
161. Zhang, Y. Y., 2003, "Development of Differential Quadrature Methods and Their Applications to Plane Elasticity," Ph.D. thesis, National University of Singapore, Singapore.
162. Zong, Z., and Zhang, Y. Y., 2009, Advanced Differential Quadrature Methods, CRC, Boca Raton, FL.
163. Zhong, H.-Z., and He, Y., 1998, "Solution of Poisson and Laplace Equations by Quadrilateral Quadrature Element," Int. J. Solid Struct., 35(21), pp. 2805-2819.
164. Chen, C.-N., 1998, "The Warping Torsion Bar Model of the Differential Quadrature Element Method," Comput. Struct., 66(2-3), pp. 249-257.
165. Chen, C.-N., 1999, "The Development of Irregular Elements for Differential Quadrature Element Method Steady-State Heat Conduction Analysis," Comput. Methods Appl. Mech. Eng., 170(1-2), pp. 1-14.
166. Chen, C.-N., 1999, "Adaptive Differential Quadrature Element Refinement Analyses of Fluids Mechanics Problems," Comput. Methods Appl. Mech. Eng., 180(1-2), pp. 47-63.
167. Chen, C.-N., 1999, "The Differential Quadrature Element Method Irregular Element Torsion Analysis Model," Appl. Math. Modell., 23(4), pp. 309-328.
168. Chen, C.-N., 2000, "A Generalized Differential Quadrature Element Method," Comput. Methods Appl. Mech. Eng., 188(1-3), pp. 553-566.
169. Chen, C.-N., 2000, "Vibration of Prismatic Beam on an Elastic Foundation by the Differential Quadrature Element Method," Comput. Struct., 77(1), pp. 1-9.
170. Chen, C.-N., 2000, "Differential Quadrature Element Analysis Using Extended Differential Quadrature," Comput. Math. Appl., 39(5-6), pp. 65-79.
171. Chen, C.-N., 2001, "Vibration of Nonuniform Shear Deformable Axisymmetric Orthotropic Circular Plates Solved by DQEM," Compos. Struct., 53(3), pp. 257-264.
172. Chen, C.-N., 2001, "Differential Quadrature Finite Difference Method for Structural Mechanics Problems," Commun. Numer. Methods Eng., 17(6), pp. 423-441.
173. Chen, C.-N., 2003, "DQEM and DQFDM for the Analysis of Composite Two-Dimensional Elasticity Problems," Compos. Struct., 59(1), pp. 3-13.
174. Chen, C.-N., 2003, "Buckling Equilibrium Equations of Arbitrarily Loaded Nonprismatic Composite Beams and the DQEM Buckling Analysis Using EDQ," Appl. Math. Modell., 27(1), pp. 27-46.
175. Chen, C.-N., 2003, "Out-of-Plane Deflection of Nonprismatic Curved Beams Structures Solved by the DQEM," Adv. Eng. Software, 34(5), pp. 297-306.
176. Chen, C.-N., 2004, "Extended GDQ and Related Discrete Element Analysis Methods for Transient Analyses of Continuum Mechanics Problems," Comput. Math. Appl., 47(1), pp. 91-99.
177. Chen, C.-N., 2004, "Dynamic Response of Shear-Deformable Axisymmetric Orthotropic Circular Plate Structures Solved by the DQEM and EDQ Based Time Integration Schemes," Compos. Struct., 64(3-4), pp. 339-348.
178. Chen, C.-N., 2004, "DQEM and DQFDM Irregular Elements for Analyses of 2D Heat Conduction in Orthotropic Media," Appl. Math. Modell., 28(7), pp. 617-638.
179. Chen, C.-N., 2005, "DQEM Analysis of In-Plane Vibration of Curved Beam Structures," Adv. Eng. Software, 36(6), pp. 412-424.
180. Chen, C.-N., 2006, Discrete Element Analysis Methods of Generic Differential Quadratures, Springer, Berlin.
181. Fantuzzi, N., 2013, "Generalized Differential Quadrature Finite Element Method Applied to Advanced Structural Mechanics," Ph.D. thesis, University of Bologna, Bologna, Italy.
182. Viola, E., Tornabene, F., and Fantuzzi, N., 2013, "Generalized Differential Quadrature Finite Element Method for Cracked Composite Structures of Arbitrary Shape," Compos. Struct., 106, pp. 815-834.
183. Viola, E., Tornabene, F., Ferretti, E., and Fantuzzi, N., 2013, "Soft Core Plane State Structures Under Static Loads Using GDQFEM and Cell Method," Comput. Model. Eng. Sci., 94, pp. 301-329.
184. Viola, E., Tornabene, F., Ferretti, E., and Fantuzzi, N., 2013, "GDQFEM Numerical Simulations of Continuous Media With Cracks and Discontinuities," Comput. Model. Eng. Sci., 94, pp. 331-368.
185. Viola, E., Tornabene, F., Ferretti, E., and Fantuzzi, N., 2013, "On Static Analysis of Plane State Structures Via GDQFEM and Cell Method," Comput. Model. Eng. Sci., 94, pp. 421-458.
186. Fantuzzi, N., Tornabene, F., and Viola, E., 2014, "Generalized Differential Quadrature Finite Element Method for Vibration Analysis of Arbitrarily Shaped Membranes," Int. J. Mech. Sci., 79, pp. 216-251.
187. Ng, T. Y., and Lam, K. Y., 2000, "Free Vibration Analysis of Rotating Circular Cylindrical Shells on Elastic Foundation," ASME J. Vib. Acoust., 122(1), pp. 85-89.
188. Lam, K. Y., and Hua, L., 2000, "Influence of Initial Pressure on Frequency Characteristics of a Rotating Truncated Circular Conical Shell," Int. J. Mech. Sci., 42(2), pp. 213-236.
189. Lam, K. Y., and Li, H., 2000, "Generalized Differential Quadrature Method for Frequency of Rotating Multilayered Conical Shell," J. Eng. Mech., 126(11), pp. 1156-1162.
190. Shu, C., Chen, W., Xue, H., and Du, H., 2001, "Numerical Study of Grid Distribution Effect on Accuracy of DQ Analysis of Beams and Plates by Error Estimation of Derivative Approximation," Int. J. Numer. Methods Eng., 51(2), pp. 159-179.
191. Shu, C., Xue, H., and Zhu, Y. D., 2001, "Numerical Study of Natural Convection in an Eccentric Annulus Between a Square Outer Cylinder and a Circular Inner Cylinder Using DQ Method," Int. J. Heat Mass Transfer, 44(17), pp. 3321-3333.
192. Bellomo, N., De Angelis, E., Graziano, L., and Romano, A., 2001, "Solutions of Nonlinear Problems in Applied Sciences by Generalized Collocation Methods and Mathematica," Comput. Math. Appl., 41(10-11), pp. 1343-1363.
193. Fung, T. C., 2001, "Solving Initial Value Problems by Differential Quadrature Method-Part 1: First-Order Equations," Int. J. Numer. Methods Eng., 50, pp. 1411-1427.
194. Fung, T. C., 2001, "Solving Initial Value Problems by Differential Quadrature Method-Part 2: Second-and Higher-Order Equations," Int. J. Numer. Methods Eng., 50, pp. 1429-1454.
195. Liu, F. L., 2001, "Differential Quadrature Element Method for Buckling Analysis of Rectangular Mindlin Plates Having Discontinuities," Int. J. Solid Struct., 38(14), pp. 2305-2321.
196. Wang, Y., Liu, R., and Wang, X., 2001, "On Free Vibration Analysis of Non-Linear Piezoelectric Circular Shallow Spherical Shells by the Differential Quadrature Element Method," J. Sound Vib., 245(1), pp. 179-185.
197. Mancuso, M., and Ubertini, F., 2001, "Collocation Methods With Controllable Dissipation for Linear Dynamics," Comput. Methods Appl. Mech. Eng., 190(28), pp. 3607-3621.
198. Zeng, H., and Bert, C. W., 2001, "A Differential Quadrature Analysis of Vibration for Rectangular Stiffened Plates," J. Sound Vib., 241(2), pp. 247-252.
199. Lam, K. Y., Li, H., Ng, T. Y., and Chua, C. F., 2002, "Generalized Differential Quadrature Method for the Free Vibration of Truncated Conical Panels," J. Sound Vib., 251(2), pp. 329-348.
200. Shu, C., Yao, Q., and Yeo, K. S., 2002, "Block-Marching in Time With DQ Discretization: An Efficient Method for Time-Dependent Problems," Comput. Methods Appl. Mech. Eng., 191(41-42), pp. 4587-4597.
201. Shu, C., and Zhu, Y. D., 2002, "Efficient Computation of Natural Convection in a Concentric Annulus Between an Outer Square Cylinder and an Inner Circular Cylinder," Int. J. Numer. Methods Fluids, 38(5), pp. 429-445.
202. Shu, C., and Wee, K. H. A., 2002, "Numerical Simulation of Natural Convection in a Square Cavity by Simple-Generalized Differential Quadrature Method," Comput. Fluids, 31(2), pp. 209-226.
203. Fung, T. C., 2002, "On Equivalence of the Time Domain Differential Quadrature Method and the Dissipative Runge-Kutta Collocation Method," Int. J. Numer. Methods Eng., 53(2), pp. 409-431.
204. Fung, T. C., 2002, "Stability and Accuracy of Differential Quadrature Method in Solving Dynamic Problems," Comput. Methods Appl. Mech. Eng., 191(13-14), pp. 1311-1331.
205. Karami, G., and Malekzadeh, P., 2002, "Static and Stability Analyses of Arbitrary Straight-Sided Quadrilateral Thin Plates by DQM," Int. J. Solids Struct., 39(19), pp. 4927-4947.
206. Wang, X., and Wang, Y., 2002, "On Non-Linear Behaviour of Spherical Shallow Shells Bonded With Piezoelectric Actuators by the Differential Quadrature Element Method (DQEM)," Int. J. Numer. Methods Eng., 53(6), pp. 1477-1490.
207. Malekzadeh, P., and Karami, G., 2003, "Out-of-Plane Static Analysis of Circular Arches by DQM," Int. J. Solids Struct., 40(23), pp. 6527-6545.
208. Ng, T. Y., Li, H., and Lam, K. Y., 2003, "Generalized Differential Quadrature Method for the Free Vibration of Rotating Composite Laminated Conical Shell With Various Boundary Conditions," Int. J. Mech. Sci., 45(3), pp. 567-587.
209. Fung, T. C., 2003, "Imposition of Boundary Conditions by Modifying the Weighting Coefficient Matrices in the Differential Quadrature Method," Int. J. Numer. Methods Eng., 56(3), pp. 405-432.
210. Fung, T. C., 2003, "Generalized Lagrange Functions and Weighting Coefficients Formulae for the Harmonic Differential Quadrature Method," Int. J. Numer. Methods Eng., 57(3), pp. 415-440.
211. Karami, G., Malekzadeh, P., and Shahpari, S. A., 2003, "A DQEM for Vibration of Shear Deformable Nonuniform Beams With General Boundary Conditions," Eng. Struct., 25(9), pp. 1169-1178.
212. Karami, G., Shahpari, S. A., and Malekzadeh, P., 2003, "DQM Analysis of Skewed and Trapezoidal Plates," Compos. Struct., 59(3), pp. 393-402.
213. Tomasiello, S., 2003, "Stability and Accuracy of the Iterative Differential Quadrature Method," Int. J. Numer. Methods Eng., 58(9), pp. 1277-1296.
214. Tomasiello, S., 2003, "Simulating Non-Linear Coupled Oscillators by an Iterative Differential Quadrature Method," J. Sound Vib., 265(3), pp. 507-525.
215. Wang, X., Tan, M., and Zhou, Y., 2003, "Buckling Analyses of Anisotropic Plates and Isotropic Skew Plates by the New Version Differential Quadrature Method," Thin-Walled Struct., 41(1), pp. 15-29.
216. Mancuso, M., and Ubertini, F., 2003, "A Methodology for the Generation of Low-Cost Higher-Order Methods for Linear Dynamics," Int. J. Numer. Methods Eng., 56(13), pp. 1883-1912.
217. Chen, W., Shu, C., He, W., and Zhong, T., 2004, "The Application of Special Matrix Product to Differential Quadrature Solutions of Geometrically Nonlinear Bending of Orthotropic Rectangular Plates," Comput. Struct., 74(1), pp. 65-76.
218. Ng, C. H. W., Zhao, Y. B., and Wei, G. W., 2004, "Comparison of Discrete Convolution and Generalized Differential Quadrature for the Vibration Analysis of Rectangular Plates," Comput. Methods Appl. Mech. Eng., 193(23-26), pp. 2483-2506.
219. Malekzadeh, P., and Karami, G., 2004, "Vibration of Non-Uniform Thick Plates on Elastic Foundation by Differential Quadrature Method," Eng. Struct., 26, pp. 1473-1482.
220. Civalek, O., 2004, "Application of Differential Quadrature (DQ) and Harmonic Differential Quadrature (HDQ) for Buckling Analysis of Thin Isotropic Plates and Elastic Columns," Eng. Struct., 26(10), pp. 171-186.
221. Wang, X., and Wang, Y., 2004, "Re-Analysis of Free Vibration of Annular Plates by the New Version of Differential Quadrature Method," J. Sound Vib., 278(3), pp. 685-689.
222. Karami, G., and Malekzadeh, P., 2004, "In-Plane Free Vibration Analysis of Circular Arches With Varying Cross Sections Using Differential Quadrature Method," J. Sound Vib., 274(3-5), pp. 777-799.
223. Wang, X., and Wang, Y., 2004, "Free Vibration Analyses of Thin Sector Plates by the New Version of Differential Quadrature Method," Comput. Methods Appl. Mech. Eng., 193(36-38), pp. 1133-1141.
224. Wang, X., Wang, Y., and Zhou, Y., 2004, "Application of a New Differential Quadrature Element Method to Free Vibration Analysis of Beams and Frame Structures," J. Sound Vib., 269(3-5), pp. 1133-1141.
225. Li, H., Lam, K. Y., and Ng, T. Y., 2005, Rotating Shell Dynamics, Elsevier, Kidlington, Oxford, UK.
226. Malekzadeh, P., and Karami, G., 2005, "Polynomial and Harmonic Differential Quadrature Methods for Free Vibration of Variable Thickness Thick Skew Plates," Eng. Struct., 27(10), pp. 1563-1574.
227. Malekzadeh, P., and Shahpari, S. A., 2005, "Free Vibration Analysis of Variable Thickness Thin and Moderately Thick Plates With Elastically Restrained Edges by DQM," Thin-Walled Struct., 43(7), pp. 1037-1050.
228. Civalek, O., 2005, "Geometrically Nonlinear Analysis of Doubly Curved Isotropic Shells Resting on Elastic Foundation by a Combination of Harmonic Differential Quadrature-Finite Difference Methods," Int. J. Pressure Vessels Piping, 82(6), pp. 470-479.
229. Viola, E., and Tornabene, F., 2005, "Vibration Analysis of Damaged Circular Arches With Varying Cross Section," SID-SDHM, 1, pp. 155-169.
230. Wang, X. H., and Redekop, D., 2005, "Natural Frequencies and Mode Shapes for an Orthotropic Thin Shell of Revolution," Thin-Walled Struct., 43(5), pp. 735-750.
231. Govoni, L., Manuso, M., and Ubertini, F., 2006, "Hierarchical Higher-Order Dissipative Methods for Transient Analysis," Int. J. Numer. Methods Eng., 67(12), pp. 1730-1767.
232. Civalek, O ., 2006, "Harmonic Differential Quadrature-Finite Differences Coupled Approaches Geometrically Nonlinear Static and Dynamic Analysis of Rectangular Plates on Elastic Foundation," J. Sound Vib., 294(4-5), pp. 966-980.
233. Civalek, O., 2006, "An Efficient Method for Free Vibration Analysis of Rotating Truncated Conical Shells," Int. J. Pressure Vessels Piping, 83(1), pp. 1-12.
234. Viola, E., and Tornabene, F., 2006, "Vibration Analysis of Conical Shell Structures Using GDQ Method," Far East J. Appl. Math., 25, pp. 23-39.
235. Malekzadeh, P., and Karami, G., 2006, "Differential Quadrature Nonlinear Analysis of Skew Composite Plates Based on FSDT," Eng. Struct., 28(9), pp. 1307-1318.
236. Karami, G., Malekzadeh, P., and Mohebpour, S. R., 2006, "DQM Free Vibration Analysis of Moderately Thick Symmetric Laminated Plates With Elastically Restrained Edges," Compos. Struct., 74(1), pp. 115-125.
237. Wang, X. H., Xu, B., and Redekop, D., 2006, "Theoretical Natural Frequencies and Mode Shapes for Thin and Thick Curved Pipes and Toroidal Shells," J. Sound Vib., 292(1-2), pp. 424-434.
238. Civalek, O., 2007, "Nonlinear Analysis of Thin Rectangular Plates on Winkler-Pasternak Elastic Foundation Differenti'al by DSC-HQM Methods," Appl. Math. Modell., 31(3), pp. 606-624.
239. Bellomo, N., Lods, B., Revelli, R., and Ridolfi, L., 2007, Generalized Collocation Methods: Solution to Nonlinear Problems, Birkhauser, Boston, MA.
240. Viola, E., and Tornabene, F., 2007, "Dynamical Analysis of Spherical Shell Structural Elements Using the First Order Shear Deformation Theory," Mechanical Vibration: Where Do We Stand, CISM, Vol. 488, Springer-Wien, NY, pp. 17-41.
241. Tornabene, F., 2007, "Modellazione e Soluzione di Strutture a Guscio in Materiale Anisotropo," Ph.D. thesis, University of Bologna, Bologna, Italy.
242. Tornabene, F., and Viola, E., 2007, "Vibration Analysis of Spherical Structural Elements Using the GDQ Method," Comput.Math. Appl., 53(10), pp. 1538-1560.
243. Viola, E., Dilena, M., and Tornabene, F., 2007, "Analytical and Numerical Results for Vibration Analysis of Multi-Stepped and Multi-Damaged Circular Arches," J. Sound Vib., 299(1-2), pp. 143-163.
244. Wang, X., 2007, "Nonlinear Stability Analysis of Thin Doubly Curved Orthotropic Shallow Shells by the Differential Quadrature Method," Comput. Methods Appl. Mech. Eng., 196(17-20), pp. 2242-2251.
245. Marzani, A., Tornabene, F., and Viola, E., 2008, "Nonconservative Stability Problems via Generalized Differential Quadrature Method," J. Sound Vib., 315(1-2), pp. 176-196.
246. Tornabene, F., and Viola, E., 2008, "2D Solution for Free Vibrations of Parabolic Shells Using Generalized Differential Quadrature Method," Eur. J. Mech. A-Solid, 27(6), pp. 1001-1025.
247. Tornabene, F., and Viola, E., 2009, "Free Vibration Analysis of Functionally Graded Panels and Shells of Revolution," Meccanica, 44(3), pp. 255-281.
248. Tornabene, F., and Viola, E., 2009, "Free Vibrations of Four-Parameter Functionally Graded Parabolic Panels and Shell of Revolution," Eur. J. Mech. A-Solid, 28(5), pp. 991-1013.
249. Tornabene, F., Viola, E., and Inman, D. J., 2009, "2D Differential Quadrature Solution for Vibration Analysis of Functionally Graded Conical, Cylindrical and Annular Shell Structures," J. Sound Vib., 328(3), pp. 259-290.
250. Tornabene, F., 2009, "Free Vibration Analysis of Functionally Graded Conical, Cylindrical Shell and Annular Plate Structures With a Four-Parameter Power-Law Distribution," Comput.Methods Appl.Mech. Eng., 198(37-40), pp. 2911-2935.
251. Viola, E., and Tornabene, F., 2009, "Free Vibrations of Three Parameter Functionally Graded Parabolic Panels of Revolution," Mech. Res. Commun., 36(5), pp. 587-594.
252. Tornabene, F., Marzani, A., Viola, E., and Elishakoff, I., 2010, "Critical Flow Speeds of Pipes Conveying Fluid by the Generalized Differential Quadrature Method," Adv. Theor. Appl. Mech., 3, pp. 121-138.
253. Tornabene, F., 2011, "Free Vibrations of Laminated Composite Doubly-Curved Shells and Panels of Revolution via the GDQ Method," Comput. Methods Appl. Mech. Eng., 200(9-12), pp. 931-952.
254. Tornabene, F., 2011, "2D GDQ Solution for Free Vibrations of Anisotropic Doubly-Curved Shells and Panels of Revolution," Compos. Struct., 93(7), pp. 1854-1876.
255. Tornabene, F., 2011, "Free Vibrations of Anisotropic Doubly-Curved Shells and Panels of Revolution With a Free-Form Meridian Resting on Winkler-Pasternak Elastic Foundations," Compos. Struct., 94(1), pp. 186-206.
256. Tornabene, F., Liverani, A., and Caligiana, G., 2011, "FGM and Laminated Doubly-Curved Shells and Panels of Revolution With a Free-Form Meridian: A 2D GDQ Solution for Free Vibrations," Int. J. Mech. Sci., 53(6), pp. 446-470.
257. Tornabene, F., Liverani, A., and Caligiana, G., 2012, "Laminated Composite Rectangular and Annular Plates: A GDQ Solution for Static Analysis With a Posteriori Shear and Normal Stress Recovery," Compos. Part B, 43(4), pp. 1847-1872.
258. Tornabene, F., Liverani, A., and Caligiana, G., 2012, "Static Analysis of Laminated Composite Curved Shells and Panels of Revolution With a Posteriori Shear and Normal Stress Recovery Using Generalized Differential Quadrature Method," Int. J. Mech. Sci., 61(1), pp. 71-87.
259. Tornabene, F., Liverani, A., and Caligiana, G., 2012, "General Anisotropic Doubly-Curved Shell Theory: A Differential Quadrature Solution for Free Vibrations of Shells and Panels of Revolution With a Free-Form Meridian," J. Sound Vib., 331(22), pp. 4848-4869.
260. Viola, E., Rossetti, L., and Fantuzzi, N., 2012, "Numerical Investigation of Functionally Graded Cylindrical Shells and Panels Using the Generalized Unconstrained Third Order Theory Coupled With the Stress Recovery," Compos. Struct., 94(12), pp. 3736-3758.
261. Tornabene, F., and Ceruti, A., 2013, "Free-Form Laminated Doubly-Curved Shells and Panels of Revolution Resting on Winkler-Pasternak Elastic Foundations: A 2D GDQ Solution for Static and Free Vibration Analysis," World J. Mech., 3, pp. 1-25.
262. Tornabene, F., and Ceruti, A., 2013, "Mixed Static and Dynamic Optimization of Four-Parameter Functionally Graded Completely Doubly-Curved and Degenerate Shells and Panels Using GDQ Method," Math. Probl. Eng., 2013(1), pp. 1-33.
263. Tornabene, F., and Reddy, J. N., 2013, "FGM and Laminated Doubly-Curved and Degenerate Shells Resting on Nonlinear Elastic Foundations: A GDQ Solution for Static Analysis With a Posteriori Stress and Strain Recovery," J. Indian Inst. Sci., 93, pp. 635-688.
264. Tornabene, F., and Viola, E., 2013, "Static Analysis of Functionally Graded Doubly-Curved Shells and Panels of Revolution," Meccanica, 48(4), pp. 901-930.
265. Tornabene, F., Viola, E., and Fantuzzi, N., 2013, "General Higher-Order Equivalent Single Layer Theory for Free Vibrations of Doubly-Curved Laminated Composite Shells and Panels," Compos. Struct., 104, pp. 94-117.
266. Viola, E., Tornabene, F., and Fantuzzi, N., 2013, "General Higher-Order Shear Deformation Theories for the Free Vibration Analysis of Completely Doubly-Curved Laminated Shells and Panels," Compos. Struct., 95, pp. 639-666.
267. Viola, E., Tornabene, F., and Fantuzzi, N., 2013, "Static Analysis of Completely Doubly-Curved Laminated Shells and Panels Using General Higher-Order Shear Deformation Theories," Compos. Struct., 101, pp. 59-93.
268. Ferreira, A. J. M., Viola, E., Tornabene, F., Fantuzzi, N., and Zenkour, A. M., 2013, "Analysis of Sandwich Plates by Generalized Differential Quadrature Method," Math. Probl. Eng., 2013, pp. 1-22.
269. Wang, X., and Wang, Y., 2013,"Free Vibration Analysis of Multiple-Stepped Beams by the Differential Quadrature Element Method," Appl. Math. Comput., 219(11), pp. 5802-5810.
270. Ferreira, A. J. M., Carrera, E., Cinefra, M., Viola, E., Tornabene, F., Fantuzzi, N., and Zenkour, A. M., 2014, "Analysis of Thick Isotropic and Cross-Ply Laminated Plates by Generalized Differential Quadrature Method and a Unified Formulation," Compos. Part B, 58, pp. 544-552.
271. Tornabene, F., Fantuzzi, N., Viola, E., and Carrera, E., 2014, "Static Analysis of Doubly-Curved Anisotropic Shells and Panels Using CUF Approach, Differential Geometry and Differential Quadrature Method," Compos. Struct., 107, pp. 675-697.
272. Tornabene, F., Fantuzzi, N., Viola, E., and Reddy, J. N., 2014, "Winkler-Pasternak Foundation Effect on the Static and Dynamic Analyses of Laminated Doubly-Curved and Degenerate Shells and Panels," Compos. Part B, 57, pp. 269-296.
273. Fantuzzi, N., and Tornabene, F., 2014, "Strong Formulation Finite Element Method for Arbitrarily Shaped Laminated Plates-I. Theoretical Analysis," Adv. Aircr. Space Sci., 1(2), pp. 125-143.
274. Fantuzzi, N., and Tornabene, F., 2014, "Strong Formulation Finite Element Method for Arbitrarily Shaped Laminated Plates-II. Numerical Analysis," Adv. Aircr. Space Sci., 1(2), pp. 145-175.
275. Viola, E., Rossetti, L., Fantuzzi, N., and Tornabene, F., 2014, "Static Analysis of Functionally Graded Conical Shells and Panels Using the Generalized Unconstrained Third Order Theory Coupled With the Stress Recovery," Compos. Struct., 112, pp. 44-65.
276. Tornabene, F., 2012, "Meccanica delle Strutture a Guscio in Materiale Composito. Il metodo Generalizzato di Quadratura Differenziale," Esculapio, Bologna, Italy.
277. Tornabene, F., and Fantuzzi, N., 2014, "Mechanics of Laminated Composite Doubly-Curved Shell Structures. The Generalized Differential Quadrature Method and the Strong Formulation Finite Element Method," Esculapio, Bologna, Italy.
278. Kansa, E. J., 1990, "Multiquadrics-A Scattered Data Approximation Scheme With Applications to Computational Fluid-Dynamics-I Surface Approximations and Partial Derivative Estimates," Comput. Math. Appl., 19(8-9), pp. 127-145.
279. Kansa, E. J., 1990, "Multiquadrics-A Scattered Data Approximation Scheme With Applications to Computational Fluid-Dynamics-II Solutions to Parabolic, Hyperbolic and Elliptic Partial Differential Equations," Comput. Math. Appl., 19(8-9), pp. 147-161.
280. Fasshauer, G. E., 1999, "Solving Differential Equations With Radial Basis Functions: Multilevel Methods and Smoothing," Adv. Comput. Math., 11(2-3), pp. 139-159.
281. Fasshauer, G. E., 2007, "Meshfree Approximation Methods With MATLAB," World Scientific, Singapore.
282. Fasshauer, G. E., and Zhang, J. G., 2007, "On Choosing 'Optimal' Shape Parameters for RBF Approximation," Numer. Algorithms, 45(1-4), pp. 345-368.
283. Ferreira, A. J. M., and Fasshauer, G. E., 2006, "Computation of Natural Frequencies of Shear Deformable Beams and Plates by an RBF-Pseudospectral Method," Comput. Methods Appl. Mech. Eng., 196(1-3), pp. 134-146.
284. Ferreira, A. J. M., Fasshauer, G. E., Batra, R. C., and Rodrigues, J. D., 2008, "Static Deformations and Vibration Analysis of Composite and Sandwich Plates Using a Layerwise Theory and RBF-PS Discretizations With Optimal Shape Parameter," Compos. Struct., 86(4), pp. 328-343.
285. Rippa, S., 1999, "An Algorithm for Selecting a Good Value for the Parameter c in Radial Basis Function Interpolation," Adv. Comput. Math., 11(2-3), pp. 193-210.
286. Wendland, H., 1999, "Meshless Galerkin Methods Using Radial Basis Functions," Math. Comput., 68, pp. 1521-1531.
287. Buhmann, M. D., 2000, "Radial Basis Functions," Acta Numer., 9, pp. 1-38.
288. Wang, J. G., and Liu, G. R., 2002, "On the Optimal Shape Parameters of Radial Basis Functions Used for 2D Meshless Methods," Comput. Methods Appl. Mech. Eng., 191(23-24), pp. 2611-2630.
289. Ferreira, A. J. M., Roque, C. M. C., and Martins, P. A. L. S., 2003, "Analysis of Composite Plates Using Higher-Order Shear Deformation Theory and a Finite Point Formulation Based on the Multiquadric Radial Basis Function Method," Compos. Part B, 34(7), pp. 627-636.
290. Shu, C., Ding, H., and Yeo, K. S., 2004, "Solution of Partial Differential Equations by a Global Radial Basis Function-Based Differential Quadrature Method," Eng. Anal. Boundary Elem., 28(10), pp. 1217-1226.
291. Ferreira, A. J. M., Roque, C. M. C., and Jorge, R. M. N., 2005, "Free Vibration Analysis of Symmetric Laminated Composite Plates by FSDT and Radial Basis Functions," Comput. Methods Appl. Mech. Eng., 194(39-41), pp. 4265-4278.
292. Ferreira, A. J. M., Roque, C. M. C., and Jorge, R. M. N., 2005, "Analysis of Composite Plates by Trigonometric Shear Deformation Theory and Multiquadrics," Comput. Struct., 83(27), pp. 2225-2237.
293. Roque, C. M. C., Ferreira, A. J. M., and Jorge, R. M. N., 2005, "Modelling of Composite and Sandwich Plates by a Trigonometric Layerwise Deformation Theory and Radial Basis Functions," Compos. Part B, 36(8), pp. 559-572.
294. Ding, H., Shu, C., Yeo, K. S., and Xu, D., 2006, "Numerical Computation of Three-Dimensional Incompressible Viscous Flows in the Primitive Variable Form by Local Multiquadratic Differential Quadrature Method," Comput. Methods Appl. Mech. Eng., 195(7-8), pp. 516-533.
295. Liu, L., Chua, L. P., and Ghista, D. N., 2007, "Mesh-Free Radial Basis Function Method for Static, Free Vibration and Buckling Analysis of Shear Deformable Composite Laminates," Compos. Struct., 78(1), pp. 58-69.
296. Wu, W. X., Shu, C., and Wang, C. M., 2007, "Vibration Analysis of Arbitrarily Shaped Membranes Using Local Radial Basis Function-Based Differential Quadrature Method," J. Sound Vib., 306(1-2), pp. 252-270.
297. Xiang, S., Wang, K. M., Ai, Y. T., Sha, Y. D., and Shi, H., 2009, "Natural Frequencies of Generally Laminated Composite Plates Using the Gaussian Radial Basis Function and First-Order Shear Deformation Theory," Thin-Walled Struct., 47(11), pp. 1265-1271.
298. Bayona, V., Moscoso, M., Carretero, M., and Kindelan, M., 2010, "RBF-FD Formulas and Convergence Properties," J. Comput. Phys., 229(22), pp. 8281-8295.
299. Xiang, S., Shi, H., Wang, K. M., Ai, Y. T., and Sha, Y. D., 2010, "Thin Plate Spline Radial Basis Functions for Vibration Analysis of Clamped Laminated Composite Plates," Eur. J. Mech. A-Solid, 29(5), pp. 844-850.
300. Bayona, V., Moscoso, M., and Kindelan, M., 2011, "Optimal Constant Shape Parameter for Multiquadric Based RBF-FD Method," J. Comput. Phys., 230(19), pp. 7384-7399.
301. Xiang, S., Bi, Z. Y., Jiang, S. X., Jin, Y. X., and Yang, M. S., 2011, "Thin Plate Spline Radial Basis Function for the Free Vibration Analysis of Laminated Composite Shells," Compos. Struct., 93(2), pp. 611-615.
302. Boyd, J. P., and Xu, Z., 2011, "Comparison of Three Spectral Methods for the Benjamin-Ono Equation: Fourier Pseudospectral, Rational Christov Functions and Gaussian Radial Basis Functions," Wave Motion, 48(8), pp. 702-706.
303. Ferreira, A. J. M., Carrera, E., Cinefra, M., Roque, C. M. C., and Polit, O., 2011, "Analysis of Laminated Shells by a Sinusoidal Shear Deformation Theory and Radial Basis Functions Collocation, Accounting for Through-the-Thickness Deformations," Compos. Part B, 42(5), pp. 1276-1284.
304. Roque, C. M. C., Cunha, D., Shu, C., and Ferreira, A. J. M., 2011, "A Local Radial Basis Functions-Finite Differences Technique for the Analysis of Composite Plates," Eng. Anal. Boundary Elem., 35(3), pp. 363-374.
305. Ferreira, A. J. M., Roque, C. M. C., Neves, A. M. A., Jorge, R. M. N., Soares, C. M. M., and Liew, K. M., 2011, "Buckling and Vibration of Isotropic and Laminated Plates by Radial Basis Functions," Compos. Part B, 42(3), pp. 592-606.
306. Jodaei, A., Jalal, M., and Yas, M. H., 2012, "Free Vibration Analysis of Functionally Graded Annular Plates by State-Space Based Differential Quadrature Method and Comparative Modeling by ANN," Compos. Part B, 43(2), pp. 340-353.
307. Neves, A. M. A., Ferreira, A. J. M., Carrera, E., Roque, C. M. C., Cinefra, M., Jorge, R. M. N., and Soares, C. M. M., 2012, "A Quasi-3D Sinusoidal Shear Deformation Theory for the Static and Free Vibration Analysis of Functionally Graded Plates," Compos. Part B, 43(2), pp. 711-725.
308. Setoodeh, A. R., Tahani, M., and Selahi, E., 2012, "Transient Dynamic and Free Vibration Analysis of Functionally Graded Truncated Conical Shells With Non-Uniform Thickness Subjected to Mechanical Shock Loading," Compos. Part B, 43(5), pp. 2161-2171.
309. Neves, A. M. A., Ferreira, A. J. M., Carrera, E., Cinefra, M., Roque, C. M. C., Jorge, R. M. N., and Soares, C. M. M., 2012, "A Quasi-3D Hyperbolic Shear Deformation Theory for the Static and Free Vibration Analysis of Functionally Graded Plates," Compos. Struct., 94(5), pp. 1814-1825.
310. Gherlone, M., Iurlaro, L., and Di Sciuva, M., 2012, "A Novel Algorithm for Shape Parameter Selection in Radial Basis Functions Collocation Method," Compos. Struct., 94(2), pp. 453-461.
311. Ferreira, A. J. M., Carrera, E., Cinefra, M., and Roque, C. M. C., 2013, "Radial Basis Functions Collocation for the Bending and Free Vibration Analysis of Laminated Plates Using the Reissner-Mixed Variational Theorem," Eur. J. Mech. A-Solid, 39, pp. 104-112.
312. Neves, A. M. A., Ferreira, A. J. M., Carrera, E., Cinefra, M., Roque, C. M. C., Jorge, R. M. N., and Soares, C. M. M., 2013, "Free Vibration Analysis of Functionally Graded Shells by a Higher-Order Shear Deformation Theory and Radial Basis Functions Collocation, Accounting for Through-the-Thickness Deformations," Eur. J. Mech. A-Solid, 37, pp. 24-34.
313. Sanyasiraju, Y. V. S. S., and Satyanarayana, C., 2013, "On Optimization of the RBF Shape Parameter in a Grid-Free Local Scheme for Convection Dominated Problems Over Non-Uniform Centers," Appl. Math. Modell., 37(12-13), pp. 7245-7272.
314. Neves, A. M. A., Ferreira, A. J. M., Carrera, E., Cinefra, M., Roque, C. M. C., Jorge, R. M. N., and Soares, C. M. M., 2013, "Static, Free Vibration and Buckling Analysis of Isotropic and Sandwich Functionally Graded Plates Using a Quasi-3D Higher-Order Shear Deformation Theory and a Meshless Technique," Compos. Part B, 44(1), pp. 657-674.
315. Tornabene, F., Fantuzzi, N., Viola, E., and Ferreira, A. J. M., 2013, "Radial Basis Function Method Applied to Doubly-Curved Laminated Composite Shells and Panels With a General Higher-Order Equivalent Single Layer Theory," Compos. Part B, 55, pp. 642-659.
316. Iurlaro, L., Gherlone, M., and Di Sciuva, M., 2014, "Energy Based Approach for Shape Parameter Selection in Radial Basis Functions Collocation Method," Compos. Struct., 107, pp. 70-78.
317. Dehghan, M., and Nikpour, A., 2013, "Numerical Solution of the System of Second-Order Boundary Value Problem Using the Local Radial Basis Functions Based Differential Quadrature Collocation Method," Appl. Math. Modell., 37(18-19), pp. 8578-8599.
318. Ding, H., Shu, C., Yeo, K. S., and Lu, Z. L., 2005, "Simulation of Natural Convection in Eccentric Annuli Between a Square Outer Cylinder and a Circular Inner Cylinder Using Local MQ-DQ Method," Numer. Heat Tranfer Appl., 47(3), pp. 291-313.
319. Bararnia, H., Jalaal, M., Ghasemi, E., Soleimani, S., Ganji, D. D., and Mohammadi, F., 2010, "Numerical Simulation of Joule Heating Phenomenon Using Meshless RBF-DQ Method," Int. J. Therm. Sci., 49(11), pp. 2117-2127.
320. Soleimani, S., Jalaal, M., Bararnia, H., Ghasemi, E., Ganji, D. D., and Mohammadi, F., 2010, "Local RBF-DQ Method for Two-Dimensional Transient Heat Conduction Problems," Int. Commun. Heat Mass Transfer, 37(9), pp. 1411-1418.
321. Shen, Q., 2010, "Local RBF-Based Differential Quadrature Collocation Method for the Boundary Layer Problems," Eng. Anal. Boundary Elem., 34(30), pp. 213-228.
322. Hashemi, M. R., and Hatam, F., 2011, "Unsteady Seepage Analysis Using Local Radial Basis Function-Based Differential Quadrature Method," Appl. Math. Modell., 35(10), pp. 4934-4950.
323. Jalaal, M., Soleimani, S., Domairry, G., Ghasemi, E., Bararnia, H., Mohammadi, F., and Barari, A., 2011, "Numerical Simulation of Electric Field in Complex Geometries for Different Electrode Arrangements Using Meshless Local MQ-DQ Method," J. Electrost., 69(3), pp. 168-175.
324. Soleimani, S., Ganji, D. D., Ghasemi, E., Jalaal, M., and Barar, H., 2011, "Meshless Local RBF-DQ for 2D Heat Condution: A Comparative Study," Therm. Sci., 15(Suppl. 1), pp. S117-S121.
325. Hashemi, M. R., and Hatam, F., 2011, "Unsteady Seepage Analysis Using Local Radial Basis Function-Based Differential Quadrature Method," Appl. Math. Modell., 35(10), pp. 4934-4950.
326. Soleimani, S., Qajarjazi, A., Bararnia, H., Barari, A., and Domairry, G., 2011, "Entropy Generation due to Natural Convection in a Partially Heated Cavity by Local RBF-DQ Method," Meccanica, 46(5), pp. 1023-1033.
327. Rodrigues, J. D., Roque, C. M. C., Ferreira, A. J. M., Cinefra, M., and Carrera, E., 2012, "Radial Basis Functions-Differential Quadrature Collocation and a Unified Formulation for Bending, Vibration and Buckling Analysis of Laminated Plates, According to Murakami's Zig-Zag Theory," Comput. Struct., 90-91, pp. 107-115.
328. Soleimani Kutanaei, S., Roshan, N., Vosoughi, A., Saghafi, S., Barari, A., and Soleimani, S., 2012, "Numerical Solution of Stokes Flow in a Circular Cavity Using Mesh-Free Local RBF-DQ," Eng. Anal. Boundary Elem., 36(5), pp. 633-638.
329. Khoshfetrat, A., and Abedini, M. J., 2012, "A Hybrid DQ/LMQRBF-DQ Approach for Numerical Solution of Poisson-Type and Burger's Equations in Irregular Domain," Appl. Math. Modell., 36(5), pp. 1885-1901.
330. Khoshfetrat, A., and Abedini, M. J., 2013, "Numerical Modeling of Long Waves in Shallow Water Using LRBF-DQ and Hybrid DQ/LRBF-DQ," Ocean Model., 65, pp. 1-10.
331. Dehghan, M., and Nikpour, A., 2013, "The Solitary Wave Solution of Coupled Klein-Gordon-Zakharov Equations via Two Different Numerical Methods," Comput. Phys. Commun., 184(9), pp. 2145-2158.
332. Homayoon, L., Abedini, M. J., and Hashemi, S. M. R., 2013, "RBF-DQ Solution for Shallow Water Equations," J. Waterw. Port Coastal Ocean Eng., 139(1), pp. 45-60.
333. Chan, Y. L., Shen, L. H., Wu, C. T., and Young, D. L., 2014, "A Novel Upwind-Based Local Radial Basis Function Differential Quadrature Method for Convection-Dominated Flows," Comput. Fluids, 89, pp. 157-166.
334. Roque, C. M. C., Cunha, D., Shu, C., and Ferreira, A. J. M., 2011, "A Local Radial Basis Functions-Finite Differences Technique for the Analysis of Composite Plates," Eng. Anal. Boundary Elem., 35(3), pp. 363-374.
335. Rodrigues, J. D., Roque, C. M. C., Ferreira, A. J. M., Carrera, E., and Cinefra, M., 2011, "Radial Basis Functions-Finite Differences Collocation and a Unified Formulation for Bending, Vibration and Buckling Analysis of Laminated Plates, According to Murakami's Zig-Zag Theory," Compos. Struct., 93(7), pp. 1613-1620.
336. Roque, C. M. C., Rodrigues, J. D., and Ferreira, A. J. M., 2012, "Analysis of Thick Plates by Local Radial Basis Functions-Finite Differences Method," Meccanica, 47(5), pp. 1157-1171.
337. Bollig, E. F., Flyer, N., and Erlebacher, G., 2012, "Solution to PDEs Using Radial Basis Function Finite-Differences (RBF-FD) on Multiple GPUs," J. Comput. Phys., 231(21), pp. 7133-7151.
338. Shu, C., Ding, H., and Zhao, N., 2006, "Numerical Comparison of Least Square-Based Finite-Difference (LSFD) and Radial Basis Function-Based Finite-Difference (RBFFD) Methods," Comput. Math. Appl., 51(8), pp. 1297-1310.
339. Hashemi, M. R., Abedini, M. J., and Malekzadeh, P., 2006, "Numerical Modeling of Long Waves in Shallow Water Using Incremental Differential Quadrature Method," Ocean Eng., 33(13), pp. 1749-1764.
340. Hashemi, M. R., and Abedini, M. J., 2007, "Numerical Modelling of Water Hammer Using Differential Quadrature Method," AIP Conf. Proc., 936, p. 263.
341. Hashemi, M. R., Abedini, M. J., and Malekzadeh, P., 2007, "A Differential Quadrature Analysis of Unsteady Open Channel Flow," Appl. Math. Modell., 31(8), pp. 1594-1608.
342. Hashemi, M. R., Abedini, M. J., Neill, S. P., and Malekzadeh, P., 2008, "Tidal and Surge Modelling Using Differential Quadrature: A Case Study in the Bristol Channel," Coastal Eng., 55(10), pp. 811-819.
343. Zhang, L., Xiang, Y., and Wei, G. W., 2006, "Local Adaptive Differential Quadrature for Free Vibration Analysis of Cylindrical Shells With Various Boundary Conditions," Int. J. Mech. Sci., 48(10), pp. 1126-1138.
344. Ng, C. H. W., Zhao, Y. B., Xiang, Y., and Wei, G. W., 2009, "On the Accuracy and Stability of a Variety of Differential Quadrature Formulations for the Vibration Analysis of Beams," Int. J. Eng. Appl. Sci., 1, pp. 1-25.
345. Wu, J.-Y., Wang, H.-C., Char, M.-I., and Tai, B.-C., 2012, "A Local Adaptive Differential Quadrature Method for Multi-Dimensional Inverse Scattering Problem of Wave Propagation," Comput. Mater. Contin., 28, pp. 261-280.
346. Wu, J. Y., Wang, H. C., Char, M. I., and Tai, B. C., 2013, "A Local Adaptive Differential Quadrature Method for Solving Multi-Dimensional Heat Transport Equation at the Microscale," Proc. Inst. Mech. Eng., Part E, 227(33-41), pp. 33-41.
347. Wu, J.-Y., and Lee, L.-T., "Identification of Crack Locations and Depths in a Multi-Cracks Beam by Using Local Adaptive Differential Quadrature Method," Proc. IMechE E J. Process Mech. Eng., in press.
348. Sun, J.-A., and Zhu, Z.-Y., 2000, "Upwind Local Differential Quadrature Method for Solving Incompressible Viscous Flow," Comput. Methods Appl. Mech. Eng., 188(1-3), pp. 495-504.
349. Zong, Z., and Lam, K. Y., 2002, "A Localized Differential Quadrature (LDQ) Method and Its Application to the 2D Wave Equation," Comput. Mech., 29(4-5), pp. 382-391.
350. Lam, K. Y., Zhang, J., and Zong, Z., 2004, "A Numerical Study of Wave Propagation in a Poroelastic Medium by Use of Localized Differential Quadrature Method," Appl. Math. Modell., 28(5), pp. 487-511.
351. Shen, L. H., Young, D. L., Lo, D. C., and Sun, C. P., 2009, "Local Differential Quadrature Method for 2D Flow and Forced-Convection Problems in Irregular Domains," Numer. Heat Transfer Part B, 55(2), pp. 116-134.
352. Tsai, C., Young, D., and Hsiang, C., 2011, "The Localized Differential Quadrature Method for Two-Dimensional Stream Function Formulation of Navier-Stokes Equations," Eng. Anal. Boundary Elem., 35(11), pp. 1190-1203.
353. Hamidi, M., Hashemi, M., Talebbeydokhti, N., and Neill, S., 2012, "Numerical Modelling of the Mild Slope Equation Using Localised Differential Quadrature Method," Ocean Eng., 47, pp. 88-103.
354. Nassar, M., Matbuly, M. S., and Ragb, O., 2013, "Vibration Analysis of Structural Elements Using Differential Quadrature Method," J. Adv. Res., 4(1), pp. 93-102.
355. Wang, T., Cao, S., and Ge, Y., 2013, "Generation of Inflow Turbulence Using the Local Differential Quadrature Method," J. Wind Eng. Ind. Aerodyn., 122, pp. 96-104.
356. Yilmaz, Y., Girgin, Z., and Evran, S., 2013, "Buckling Analyses of Axially Functionally Graded Nonuniform Columns With Elastic Restraint Using a Localized Differential Quadrature Method," Math. Probl. Eng., 2013, pp. 1-12.
357. Al-Saif, A. S. J., and Al-Saadawi, F. A., 2013, "Bernstein Differential Quadrature Method for Solving the Unsteady State Convection-Diffusion Equation," Indian J. Appl. Res., 3(9), pp. 20-26.
358. Ahmed, H. M., 2013, "Solutions of 2nd-Order Linear Differential Equations Subject to Dirichlet Boundary Conditions in a Bernstein Polynomial Basis," J. Egypt. Math. Soc., 22(2), pp. 227-237.
359. Tornabene, F., Fantuzzi, N., and Bacciocchi, M., 2014, "The Local GDQ Method Applied to General Higher-Order Theories of Doubly-Curved Laminated Composite Shells and Panels: The Free Vibration Analysis," Compos. Struct., 116, pp. 637-660.
360. Farid, M., Zahedinejad, P., and Malekzadeh, P., 2010, "Three-Dimensional Temperature Dependent Free Vibration Analysis of Functionally Graded Material Curved Panels Resting on Two-Parameter Elastic Foundation Using a Hybrid Semi-Analytic, Differential QuadratureMethod," Mater. Des., 31(1), pp. 2-13.
361. Zahedinejad, P., Malekzadeh, P., Farida, M., and Karami, G., 2010, "A Semi-Analytical Three-Dimensional Free Vibration Analysis of Functionally Graded Curved Panels," Int. J. Pressure Vessels Piping, 87(8), pp. 470-480.
362. Khalili, S. M. R., Jafari, A. A., and Eftekhari, S. A., 2010, "A Mixed Ritz-DQ Method for Forced Vibration of Functionally Graded Beams Carrying Moving Loads," Compos. Struct., 92(10), pp. 2497-2511.
363. Eftekhari, S. A., and Jafari, A. A., 2012, "A Mixed Method for Free and Forced Vibration of Rectangular Plates," Appl. Math. Modell., 36(6), pp. 2814-2831.
364. Eftekhari, S. A., and Jafari, A. A., 2013, "Modified Mixed Ritz-DQ Formulation for Free Vibration of Thick Rectangular and Skew Plates With General Boundary Conditions," Appl. Math. Modell., 37(12-13), pp. 7398-7426.
365. Eftekhari, S. A., and Jafari, A. A., 2013, "A Simple and Accurate Mixed FE-DQ Formulation for Free Vibration of Rectangular and Skew Mindlin Plates With General Boundary Conditions," Meccanica, 48(5), pp. 1139-1160.
366. Wei, G. W., 1999, "Discrete Singular Convolution for the Solution of the Fokker-Planck Equation," J. Chem. Phys., 110(18), pp. 8930-8942.
367. Wei, G. W., 2000, "Discrete Singular Convolution for the Sine-Gordon Equation," Physica D, 137(3-4), pp. 247-259.
368. Wei, G. W., 2000, "Solving Quantum Eigenvalue Problems by Discrete Singular Convolution," J. Phys. B, 33, pp. 343-352.
369. Wei, G. W., 2000, "Wavelets Generated by Using Discrete Singular Convolution Kernels," J. Phys. A:Math. Gen., 33, pp. 8577-8596.
370. Wan, D. C., and Wei, G. W., 2000, "Numerical Solution of Incompressible Euler and Navier-Stokes Equations by Efficient Discrete Singular Convolution Method," Acta Mech. Sin., 16(3), pp. 223-239.
371. Wei, G. W., 2001, "Discrete Singular Convolution for Beam Analysis," Eng. Struct., 23(9), pp. 1045-1053.
372. Wei, G. W., 2001, "Vibration Analysis by Discrete Singular Convolution," J. Sound Vib., 244(3), pp. 535-553.
373. Wei, G. W., 2001, "A New Algorithm for Solving Some Mechanical Problems," Comput. Methods Appl. Mech. Eng., 190(15-17), pp. 2017-2030.
374. Wei, G. W., Zhao, Y. B., and Xiang, Y., 2001, "The Determination of the Natural Frequencies of Rectangular Plates With Mixed Boundary Conditions by Discrete Singular Convolution," Int. J. Mech. Sci., 43(8), pp. 1731-1746.
375. Wan, D. C., Patnaik, B. S. V., and Wei, G. W., 2001, "A New Benchmark Quality Solution for the Buoyancy Driven Cavity by Discrete Singular Convolution," Numer. Heat Transfer Part B, 40(3), pp. 199-228.
376. Wei, G. W., Zhao, Y. B., and Xiang, Y., 2002, "A Novel Approach for the Analysis of High Frequency Vibrations," J. Sound Vib., 257(2), pp. 207-246.
377. Zhao, Y. B., Wei, G. W., and Xiang, Y., 2002, "Discrete Singular Convolution for the Prediction of High Frequency Vibration of Plates," Int. J. Solids Struct., 39(1), pp. 65-88.
378. Yang, S. Y., Zhou, Y. C., and Wei, G. W., 2002, "Comparison of the Discrete Singular Convolution Algorithm and the Fourier Pseudospectral Methods for Solving Partial Differential Equations," Comput. Phys. Commun., 143(2), pp. 113-135.
379. Wan, D. C., Zhou, Y. C., and Wei, G. W., 2002, "Numerical Solution of Incompressible Flows by the Discrete Singular Convolution," Int. J. Numer. Methods Fluids, 38(8), pp. 789-810.
380. Feng, B. F., and Wei, G. W., 2002, "A Comparison of the Spectral and the Discrete Singular Convolution Schemes for the KdV-Type Equations," J. Comput. Appl. Math., 145(1), pp. 183-188.
381. Wan, D. C., Patnaik, B. S. V., and Wei, G. W., 2002, "Discrete Singular Convolution-Finite Subdomain Method for the Solution of Incompressible Viscous Flows," J. Comput. Phys., 180(1), pp. 229-255.
382. Wei, G. W., Zhao, Y. B., and Xiang, Y., 2002, "Discrete Singular Convolution and Its Application to the Analysis of Plates With Internal Supports, I Theory and Algorithm," Int. J. Numer. Methods Eng., 55(8), pp. 913-946.
383. Xiang, Y., Zhao, Y. B., and Wei, G. W., 2002, "Discrete Singular Convolution and Its Application to the Analysis of Plates With Internal Supports. II Complex Supports," Int. J. Numer. Methods Eng., 55(8), pp. 947-971.
384. Zhao, S., and Wei, G. W., 2003, "Comparison of the Discrete Singular Convolution and Three Other Numerical Schemes for Fisher's Equation," SIAM J. Sci. Comput., 25(1), pp. 127-147.
385. Zhao, Y. B., Wei, G. W., and Xiang, Y., 2002, "Discrete Singular Convolution for the Prediction of High Frequency Vibration of Plates," Int. J. Solids Struct., 39, pp. 65-88.
386. Ng, C. H., 2004, "Comparison of Discrete Singular Convolution and Generalized Differential Quadrature for the Vibration Analysis of Rectangular Plates," Master thesis, National University of Singapore, Singapore.
387. Zhao, S., and Wei, G. W., 2005, "Option Valuation by Using Discrete Singular Convolution," Appl. Math. Comput., 167(1), pp. 383-418.
388. Boyd, J. P., 2006, "A Proof That the Discrete Singular Convolution (DSC)/Lagrange-Distributed Approximating Function (LDAF) Method Is Inferior to High Order Finite Differences," J. Comput. Phys., 214(2), pp. 538-549.
389. Wei, G. W., and Zhao, S., 2008, "On the Validity of a Proof That the Discrete Singular Convolution (DSC)/Lagrange-Distributed Approximation Function (LDAF) Method is Inferior to High Order Finite Differences," J. Comput. Phys., 226(2), pp. 2389-2392.
390. Civalek, O., 2013, "Nonlinear Dynamic Response of Laminated Plates Resting on Nonlinear Elastic Foundations by the Discrete Singular Convolution-Differential Quadrature Coupled Approaches," Compos. Part B, 50, pp. 171-179.
391. Gurses, M., Civalek, O., Korkmaz, A. K., and Ersoy, H., 2009, "Free Vibration Analysis of Symmetric Laminated Skew Plates by Discrete Singular Convolution Technique Based on First-Order Shear Deformation Theory," Int. J. Numer. Methods Eng., 79(3), pp. 290-313.
392. Civalek, O., 2007, "Nonlinear Analysis of Thin Rectangular Plates on Winkler-Pasternak Elastic Foundations by DSC-HDQ Methods," Appl. Math. Modell., 31(3), pp. 606-624.
393. Wu, X., Du, H., and Kong, W., 2008, "Differential Quadrature Trefftz Method for Poisson-Type Problems on Irregular Domains," Eng. Anal. Boundary Elem., 32(5), pp. 413-423.
394. Liu, X., and Wu, X., 2009, "Differential Quadrature Trefftz Method for Irregular Plate Problems," Eng. Anal. Boundary Elem., 33(3), pp. 363-367.
395. Wu, X., and Ren, Y., 2007, "Differential Quadrature Method Based on the Highest Derivative and Its Applications," J. Comput. Appl. Math., 205(1), pp. 239-250.
396. Liu, G. R., 2003, Mesh Free Methods. Moving Beyond the Finite Element Method, CRC, Boca Raton, FL.
397. Li, H., and Mulay, S. S., 2013, Meshless Methods and Their Numerical Properties, CRC, Boca Raton, FL.
398. Fries, T.-P., and Matthies, H.-G., 2004, Classification and Overview of Meshfree Methods, Technical University Braunschweig, Brunswick, Germany.
399. Mulay, S. S., Li, H., and See, S., 2009, "On the Random Differential Quadrature (RDQ) Method: Consistency Analysis and Application in Elasticity Problems," Comput. Mech., 44(4), pp. 563-590.
400. Mulay, S. S., Li, H., and See, S., 2009, "On the Convergence of Random Differential Quadrature (RDQ) Method and Its Application in Solving Nonlinear Differential Equations in Mechanics," Comput. Model. Eng. Sci., 48, pp. 43-82.
401. Mulay, S., and Li, H., 2009, "Analysis of Microelectromechanical Systems Using the Meshless Random Differential Quadrature Method," Adv. Mater. Res., 74, pp. 29-32.
402. Mulay, S. S., Li, H., and See, S., 2010, "On the Development of Adaptive Random Differential Quadrature Method With an Error Recovery Technique and Its Application in the Locally High Gradient Problems," Comput. Mech., 45(5), pp. 467-493.
403. Mulay, S. S., 2011, "Development of a Novel Strong-Form Meshless Technique: Random Differential Quadrature (RDQ) Method With Applications for 2D Multiphysics Simulation of pH-Sensitive Hydrogel," Ph.D. thesis, Nanyang Technological University, Singapore.
404. Li, H., and Mulay, S. S., 2011, "2D Simulation of the Deformation of pHSensitive Hydrogel by Novel Strong-Form Meshless Random Differential Quadrature Method," Comput. Mech., 48(6), pp. 729-753.
405. Li, H., Mulay, S. S., and See, S., 2009, "On the Location of Zeroes of Polynomials From the Stability Analysis of Novel Strong-Form Meshless Random Differential Quadrature Method," Comput.Model. Eng. Sci., 54, pp. 147-199.
406. Li, H., and Zou, H., 2013, "A Random Integral Quadrature Method for Numerical Analysis of the Second Kind of Volterra Integral Equations," J. Comput. Appl. Math., 237(1), pp. 35-42.
407. Shu, C., and Fan, L. F., 2001, "A New Discretization Method and Its Application to Solve Incompressible Navier-Stokes Equations," Comput. Mech., 27(4), pp. 292-301.
408. Shu, C., and Wu, Y. L., 2002, "Domain-Free Discretization Method for Doubly Connected Domain and Its Application to Simulate Natural Convection in Eccentric Annuli," Comput. Methods Appl. Mech. Eng., 191(17-18), pp. 1827-1841.
409. Wu, Y. L., Shu, C., Chen, H. Q., and Zhao, N., 2004, "Radial Basis Function-Enhanced Domain-Free Discretization Method and Its Applications," Numer. Heat Transfer Part B, 46(3), pp. 269-282.
410. Zhou, C. H., and Shu, C., 2012, "Simulation of Self-Propelled Anguilliform Swimming by Local Domain-Free Discretization Method," Int. J. Numer. Methods Fluids, 69(12), pp. 1891-1906.
411. Chen, W. Q., Lv, C. F., and Bian, Z. G., 2003, "Elasticity Solution for Free Vibration of Laminated Beams," Compos. Struct., 62(1), pp. 75-82.
412. Lv, C. F., 2006, "State-Space-Based Differential Quadrature Method and Its Applications," Ph.D. thesis, Zhejiang University, People's Republic of China.
413. Lu, C. F., Zhang, Z. C., and Chen, W. Q., 2007, "Free Vibration of Generally Supported Rectangular Kirchhoff Plates: State-Space-Based Differential Quadrature Method," Int. J. Numer. Methods Eng., 70(12), pp. 1430-1450.
414. Lu, C. F., and Chen, W. Q., 2007, "A Hybrid Elasticity Method for Bending and Free Vibration of Composite Laminates," Computational Methods in Engineering and Science, Proceedings of the 10th International Conference on Enhancement and Promotion of Computational Methods in Engineering and Science (EPMESC X), Z.H. Yao, and M.W. Yuan, eds., Sanya, China, Aug. 21-23, pp. 327-327.
415. Li, Y., and Shi, Z., 2009, "Free Vibration of a Functionally Graded Piezoelectric Beam via State-Space Based Differential Quadrature," Compos. Struct., 87(3), pp. 257-264.
416. Jodaei, A., Jalal, M., and Yas, M. H., 2012, "Free Vibration Analysis of Functionally Graded Annular Plates by State-Space Based Differential Quadrature Method and Comparative Modeling by ANN," Compos. Part B, 43(2), pp. 340-353.
417. Wu, C.-P., and Jiang, R.-Y., 2013, "A State Space Differential Reproducing Kernel Method for the 3D Analysis of FGM Sandwich Circular Hollow Cylinders With Combinations of Simply-Supported and Clamped Edges," Compos. Struct., 94(11), pp. 3401-3420.
418. Liew, K. M., Huang, Y. Q., and Reddy, J. N., 2002, "A Hybrid Moving Least Squares and Differential Quadrature (MLSDQ) Meshfree Method," Int. J. Comput. Eng. Sci., 3(1), pp. 1-12.
419. Liew, K. M., Huang, Y. Q., and Reddy, J. N., 2003, "Moving Least Squares Differential Quadrature Method and Its Application to the Analysis of Shear Deformable Plates," Int. J. Numer. Methods Eng., 56(15), pp. 2331-2351.
420. Liew, K. M., and Huang, Y. Q., 2003, "Bending and Buckling of Thick Symmetric Rectangular Laminates Using the Moving Least-Squares Differential Quadrature Method," Int. J. Mech. Sci., 45(1), pp. 95-114.
421. Liew, K. M., Huang, Y. Q., and Reddy, J. N., 2003, "Vibration Analysis of Symmetrically Laminated Plates Based on FSDT Using the Moving Least Squares Differential Quadrature Method," Comput. Methods Appl. Mech. Eng., 192(19), pp. 2203-2222.
422. Liew, K. M., Huang, Y. Q., and Reddy, J. N., 2004, "Analysis of General Shaped Thin Plates by the Moving Least-Squares Differential Quadrature Method," Finite Elem. Anal. Des., 40(11), pp. 1453-1474.
423. Li, Q. S., and Huang, Y. Q., 2004, "Moving Least-Squares Differential Quadrature Method for Free Vibration of Antisymmetric Laminates," J. Eng. Mech., 130(12), pp. 1447-1457.
424. Huang, Y. Q., and Li, Q. S., 2004, "Bending and Buckling Analysis of Antisymmetric Laminates Using the Moving Least Square Differential Quadrature Method," Comput. Methods Appl. Mech. Eng., 193(33-35), pp. 3471-3492.
425. Lanhe, W., Hua, L., and Daobin, W., 2005, "Vibration Analysis of Generally Laminated Composite Plates by the Moving Least Squares Differential Quadrature Method," Compos. Struct., 68(3), pp. 319-330.
426. Lanhe, W., Honghun, W., and Daobin, W., 2007, "Dynamic Stability Analysis of FGM Plates by the Moving Least Squares Differential Quadrature Method," Compos. Struct., 77(3), pp. 383-394.
427. Sladek, V., Sladek, J., and Sator, L., 2013, "Physical Decomposition of Thin Plate Bending Problems and Their Solution by Mesh-Free Methods," Eng. Anal. Boundary Elem., 37(2), pp. 348-365.
428. Sator, L., Sladek, V., and Sladek, J., 2014, "Coupling Effects in Elastic Analysis of FGM Composite Plates by Mesh-Free Methods," Compos. Struct., 115, pp. 100-110.
429. Sator, L., Sladek, V., and Sladek, J., 2014, "Analysis of Beams With Transversal Gradations of the Young's Modulus and Variable Depths by the Meshless Method," Slovak J. Civil Eng., 22(1), pp. 23-36.
430. Ragb, O., Matbuly, M. S., and, Nassar, M., 2014, "Analysis of Composite Plates Using Moving Least Squares Differential Quadrature Method," Appl. Math. Comput., 238, pp. 225-236.
431. Belytschko, T., Lu, Y. Y., and Gu, L., 1994, "Element-Free Galerkin Methods," Int. J. Numer. Methods Eng., 37(2), pp. 229-256.
432. Belytschko, T., Lu, Y. Y., Gu, L., and Tabbara, M., 1995, "Element-Free Galerkin Methods for Static and Dynamic Fracture," Int. J. Solids Struct., 32(17-18), pp. 2547-2570.
433. Belytschko, T., Lu, Y. Y., and Gu, L., 1995, "Crack Propagation by Element-Free Galerkin Methods," Eng. Fract. Mech., 51(2), pp. 295-315.
434. Belytschko, T., Krongauz, Organ, D., Fleming, M., and Krysl, P., 1996, "Meshless Methods: An Overview and Recent Developments," Comput. Methods Appl. Eng., 139(1-4), pp. 3-47.
435. Krysl, P., and Belytschko, T., 1997, "Element-Free Galerkin Method: Convergence," Comput. Methods Appl. Mech. Eng., 148(3-4), pp. 257-277.
436. Haussler-Combe, U., and Korn, C., 1998, "An Adaptive Approach With the Element-Free-Galerkin Method," Comput. Methods Appl. Mech. Eng., 162(1-4), pp. 203-222.
437. Zhu, T., and Atluri, S. N., 1998, "A Modified Collocation & Penalty Formulation for Enforcing the Essential Boundary Conditions in the Element Free Galerkin Method," Comput. Mech., 21(3), pp. 211-222.
438. Atluri, S. N., and Zhu, T., 1998, "A New Meshless Local Petrov-Galerkin (MLPG) Approach to Nonlinear Problems in Computer Modeling & Simulation," Comput. Model. Simul. Eng., 3, pp. 187-196.
439. Atluri, S. N., and Zhu, T., 1998, "A New Meshless Local Petrov-Galerkin (MLPG) Approach in ComputationalMechanics," Comput.Mech., 22(2), pp. 117-127.
440. Cho, J. Y., Kim, H. G., and Atluri, S. N., 1999, "A Critical Assessment of the Truly Meshless Local Petrov Galerkin (MLPG) and Local Boundary Integral Equation (LBIE) Methods," Comput. Mech., 24(5), pp. 348-372.
441. Kim, H. G., Cho, J. Y., and Atluri, S. N., 1999, "Analysis of Thin Beams Using the Meshless Local Petrov-Galerkin Method With Generalized Moving Least Squares Interpolations," Comput. Mech., 24(5), pp. 334-347.
442. Atluri, S. N., and Zhu, T., 2000, "New Concepts in Meshless Methods," Int. J. Numer. Methods Eng., 47, pp. 537-556.
443. Atluri, S. N., and Zhu, T. L., 2000, "The Meshless Local Petrov-Galerkin (MLPG) Approach for Solving Problems in Elasto-Statics," Comput. Mech., 25(2-3), pp. 169-179.
444. Kim, H. G., and Atluri, S. N., 2000, "Arbitrary Placement of Secondary Nodes, and Error Control, in the Meshless Local Petrov-Galerkin (MLPG) Method," Comput. Model. Eng. Sci., 1, pp. 11-32.
445. Lin, H., and Atluri, S. N., 2000, "Meshless Local Petrov-Galerkin (MLPG) Method for Convection-Diffusion," Comput. Model. Eng. Sci., 1, pp. 45-60.
446. Lin, H., and Atluri, S. N., 2001, "The Meshless Local Petrov-Galerkin (MLPG) Method for Solving Incompressible Navier-Stokes Equations," Comput. Model. Eng. Sci., 2, pp. 117-142.
447. Long, S. Y., and Atluri, S. N., 2002, "A Meshless Local Petrov-Galerkin Method for Solving the Bending Problem of a Thin Plate," Comput. Model. Eng. Sci., 3, pp. 53-63.
448. Atluri, S. N., and Shen, S. P., 2002, "The Meshless Local Petrov-Galerkin (MLPG) Method: A Simple & Less-Costly Alternative to the Finite Element and Boundary Element Methods," Comput. Model. Eng. Sci., 3, pp. 11-51.
449. Soric, J., Li, Q., Jarak, T., and Atluri, S. N., 2004, "Meshless Local Petrov-Galerkin (MLPG) Formulation for Analysis of Thick Plates," Comput. Model. Eng. Sci., 6, pp. 349-357.
450. Atluri, S. N., and Shen, S. P., 2005, "The Basis of Meshless Domain Discretization: The Meshless Local Petrov-Galerkin (MLPG) Method," Adv. Comput. Math., 23, pp. 73-93.
451. Sladek, J., Stanak, P., Han, Z.-D., Sladek, V., and Atluri, S. N., 2013, "Applications of the MLPG Method in Engineering & Sciences: A Review," Comput. Model. Eng. Sci., 92, pp. 423-475.
452. Zhu, T., Zhang, J., and Atluri, S. N., 1998, "A Meshless Local Boundary Integral Equation (LBIE) Method for Solving Nonlinear Problems," Comput. Mech., 22(2), pp. 174-176.
453. Zhu, T., Zhang, J. D., and Atluri, S. N., 1998, "A Local Boundary Integral Equation (LBIE) Method in Computational Mechanics, and a Meshless Discretization Approach," Comput. Mech., 21(3), pp. 223-235.
454. Zhu, T., Zhang, J., and Atluri, S. N., 1999, "A Meshless Numerical Method Based on the Local Boundary Integral Equation (LBIE) to Solve Linear and Nonlinear Boundary Value Problems," Eng. Anal. Boundary Elem., 23(5-6), pp. 375-389.
455. Atluri, S. N., Sladek, J., Sladek, V., and Zhu, T., 2000, "The Local Boundary Integral Equation (LBIE) and Its Meshless Implementation for Linear Elasticity," Comput. Mech., 25(2-3), pp. 180-198.
456. Sladek, J., Sladek, V., and Atluri, S. N., 2000, "Local Boundary Integral Equation (LBIE) Method for Solving Problems of Elasticity With Nonhomogeneous Material Properties," Comput. Mech., 24(6), pp. 456-462.
457. Sladek, V., Sladek, J., and Atluri, S. N., 2000, "Numerical Integration of Singularities in Meshless Implementation of Local Boundary Integral Equations," Comput. Mech., 25(4), pp. 394-403.
458. Sladek, J., Sladek, V., and Atluri, S. N., 2001, "A Pure Contour Formulation for the Meshless Local Boundary Integral Equation Method in Thermoelasticity," Comput. Model. Eng. Sci., 2, pp. 423-433.
459. Reed, W. H., and Hill, T. R., 1973, "Triangular Mesh Methods for the Neutron Transport Equation," Los Alamos Scientific Laboratory, Technical Report No. LA-UR-73-479.
460. Lesaint, P., and Raviart, P.-A., 1974, "On a Finite Element Method for Solving the Neutron Transport Equation," Mathematical Aspects of Finite Elements in Partial Differential Equations, C. de Boor, ed., Academic, NY.
461. Zienkiewicz, O. C., Taylor, R. L., Sherwin, S. J., and Peiro, J., 2003, "On Discontinuous Galerkin Methods," Int. J. Numer. Methods Eng., 58(8), pp. 1119-1148.
462. Zhong, H., 2004, "Spline-Based Differential Quadrature for Fourth Order Differential Equations and Its Application to Kirchhoff Plates," Appl. Math. Modell., 28(4), pp. 353-366.
463. Guo, Q., and Zhong, H., 2004, "Non-Linear Vibration Analysis of Beams by a Spline-Based Differential Quadrature Method," J. Sound Vib., 269(1-2), pp. 413-420.
464. Zhong, H., and Guo, Q., 2004, "Vibration Analysis of Rectangular Plates With Free Corners Using Spline-Based Differential Quadrature," Shock Vib., 11, pp. 119-128.
465. Zhong, H., and Lan, M., 2006, "Solution of Nonlinear Initial-Value Problems by the Spline-Based Differential Quadrature Method," J. Sound Vib., 296(4-5), pp. 908-918.
466. Krowiak, A., 2006, "Symbolic Computing in Spline-Based Differential Quadrature Method," Commun. Numer. Methods Eng., 22(11), pp. 1097-1107.
467. Krowiak, A., 2008, "Methods Based on the Differential Quadrature in Vibration Analysis of Plates," J. Theor. Appl. Mech., 46, pp. 123-139.
468. Korkmaz, A., Aksoy, A. M., and Dag, I., 2011, "Quartic B-Spline Differential Quadrature Method," Int. J. Nonlinear Sci., 11, pp. 403-411.
469. Gupta, B., and Kukreja, V. K., 2012, "Numerical Approach for Solving Diffusion Problems Using Cubic B-Spline Collocation Method," Appl. Math. Comput., 219(4), pp. 2087-2099.
470. Krowiak, A., 2012, "Modified Spline-Based Differential Quadrature Method Applied to Vibration Analysis of Truncated Conical Shells," Eng. Comput., 29(8), pp. 856-874.
471. Krowiak, A., 2013, "Determination of the Weighting Coefficients for Differential Quadrature Method Based on Spline Interpolation," Tech. Trans. Mech., 1-M, pp. 199-204.
472. Arora, G., and Singh, G. K., 2013, "Numerical Solution of Burgers' Equation With Modified Cubic B-Spline Differential Quadrature Method," Appl. Math. Comput., 224, pp. 166-177.
473. Korkmaz, A., and Da-g,-I., 2013, "Numerical Simulations of Boundary-Forced RLW Equation With Cubic B-Spline-Based Differential Quadrature Methods," Arabian J. Sci. Eng., 38(5), pp. 1151-1160.
474. Mohammed, O. H., Fadhel, F. S., and Saeed, M. A., 2013, "Numerical Solution of a Uniform Beam Problem Using G-Spline-Based Differential Quadrature Method," J. Al-Nahrain Univ. Sci., 16, pp. 139-201.
475. Barrera, D., Gonz-alez, P., Ib-a~nez, F., and Ib-a~nez, M. J., 2014, "A General Spline Differential Quadrature Method Based on Quasi-Interpolation," J. Comput. Appl. Math., 275, pp. 465-475.
476. Babuska, I., Chandra, J., and Flaherty, J. E., 1983, Adaptive Computational Methods for Partial Differential Equations, SIAM, Philadelphia, PA.
477. Babuska, I., Flaherty, J. E., Henshaw, W. D., Hopcroft, J. E., Oliger, J. E., and Tez, T., 1995, "Modeling Mesh Generation and Adaptive Numerical Methods for Partial Differential Equations," The IMA Volumes in Mathematics and Its Applications, Vol. 75, Springer-Verlag, New York.
478. Babuska, I., Zienkiewicz, O. C., Gago, J., and de A. Oliveira, E. R., 1986, Accuracy Estimates and Adaptive Refinements in Finite Element Computations, Wiley, Chichester, West Sussex, UK.
479. Bern, M. W., Flaherty, J. E., and Luskin, M., 1999, "Grid Generation and Adaptive Algorithms," The IMA Volumes in Mathematics and Its Applications, Vol. 113, Springer, New York.
480. Clark, K., Flaherty, J. E., and Shephard, M. S., 1994, "Applied Numerical Mathematics," Special Issue on Adaptive Methods for Partial Differential Equations, Vol. 14, North Holland, Amsterdam.
481. Duncan, D. B., 1998, "Applied Numerical Mathematics," Special Issue on Grid Adaptation in Computational PDEs: Theory and Applications, Vol. 26, North Holland, Amsterdam.
482. Flaherty, J. E., Paslow, P. J., Shephard, M. S., and Vasilakis, J. D., 1989, Adaptive Methods for Partial Differential Equations, SIAM, Philadelphia, PA.
483. Schwab, C., 1999, P-and Hp-Finite Element Methods: Theory and Applications in Solid and Fluid Mechanics (Numerical Mathematics and Scientific Computation), Clarendon, Oxford University Press, New York.
484. Verfurth, R., 1996, A Review of Posteriori Error Estimation and Adaptive Mesh Refinement Techniques, Teubner-Wiley, Chichester, West Sussex, UK.
485. Szabo, B., and Babuska, I., 1991, Finite Element Analysis, Wiley, Chichester, West Sussex, UK.
486. Rachowicz, W., Oden, J. T., and Demkowicz, L., 1989, "Toward a Universal H-P Adaptive Finie Element Strategy, Part 3, Design of H-P Meshes," Comput. Methods Appl. Mech. Eng., 77(1-2), pp. 181-212.
487. Rank, E., and Babuska, I., 1987, "An Expert System for the Optimal Mesh Design in the Hp-Version of the Finite Element Method," Int. J. Numer. Methods Eng., 24(11), pp. 2087-2106.
488. Sherbourne, A. N., and Pandey, M. D., 1991, "Differential Quadrature Method in the Buckling Analysis of Beams and Composite Plates," Comput. Struct., 40(4), pp. 903-913.
489. Wang, X., 1995, "Differential Quadrature for Buckling Analysis of Laminated Plates," Comput. Struct., 57(4), pp. 715-719.
490. Du, H., Liew, K. M., and Lim, M. K., 1996, "Generalized Differential Quadrature Method for Buckling Analysis," J. Eng. Mech., 122(2), pp. 95-100.
491. Moradi, S., and Taheri, F., 1999, "Application of Differential Quadrature Method to the Delamination Buckling of Composite Plates," Comput. Struct., 70(6), pp. 615-623.
492. Moradi, S., and Taheri, F., 1999, "Delamination Buckling Analysis of General Laminated Composite Beams by Differential Quadrature Method," Compos. Part B, 30(5), pp. 503-511.
493. Girgin, Z., Ylmaz, Y., and Çetkin, A., 2000, "Application of the Generalized Differential Quadrature Method to Deflection and Buckling Analysis of Structural Components," Pamukkale Univ. J. Eng. Sci., 6(2-3), pp. 117-124.
494. Chou, Y.-T., and Choi, S.-T., 2000, "Vibration and Buckling Analyses of Beams by the Modified Differential Quadrature Method," J. Mech., 16(4), pp. 189-195.
495. Wang, X., Wang, X., and Shi, X., 2006, "Differential Quadrature Buckling Analyses of Rectangular Plates Subjected to Non-Uniform Distributed In-Plane Loadings," Thin-Walled Struct., 44(8), pp. 837-843.
496. Wang, X., Wang, X., and Shi, X., 2007, "Accurate Buckling Loads of Thin Rectangular Plates Under Parabolic Edge Compressions by the Differential Quadrature Method," Int. J. Mech. Sci., 49(4), pp. 447-453.
497. Jiang, L., Wang, Y., and Wang, X., 2008, "Buckling Analysis of Stiffened Circular Cylindrical Panels Using Differential Quadrature Element Method," Thin-Walled Struct., 46(4), pp. 390-398.
498. Wang, X., Gan, L., and Zhang, Y., 2008, "Differential Quadrature Analysis of the Buckling of Thin Rectangular Plates With Cosine-Distributed Compressive Loads on Two Opposite Sides," Adv. Eng. Software, 39(6), pp. 497-504.
499. Yuan, Z., and Wang, X., 2011, "Buckling and Post-Buckling Analysis of Extensible Beam-Columns by Using the Differential Quadrature Method," Comput. Math. Appl., 62(12), pp. 4499-4513.
500. Zhang, W., Wang, X., 2011, "Elastoplastic Buckling Analysis of Thick Rectangular Plates by Using the Differential Quadrature Method," Comput. Math. Appl., 61(1), pp. 44-61.
501. Malekzadeh, P., Golbahar Haghighi, M. R., and Alibeygi Beni, A., 2012, "Buckling Analysis of Functionally Graded Arbitrary Straight-Sided Quadrilateral Plates on Elastic Foundations," Meccanica, 47(2), pp. 321-333.
502. Raju, G., Wu, Z., and Weaver, P. M., 2013, "Postbuckling Analysis of Variable Angle Tow Plates Using Differential Quadrature Method," Compos. Struct., 106, pp. 74-84.
503. Striz, A. G., Jang, S. K., and Bert, C. W., 1988, "Nonlinear Bending Analysis of Thin Circular Plates by Differential Quadrature," Thin-Walled Struct., 6(1), pp. 51-62.
504. Feng, Y., and Bert, C. W., 1992, "Application of the Quadrature Method to Flexural Vibration Analysis of a Geometrically Nonlinear Beam," Nonlinear Dyn., 3(1), pp. 13-18.
505. Lin, R. M., Lim, M. K., and Du, H., 1994, "Deflection of Plates With Nonlinear Boundary Supports Using Generalized Differential Quadrature," Comput. Struct., 53(4), pp. 993-999.
506. Liu, G. R., and Wu, T. Y., 2000, "Numerical Solution for Differential Equations of Duffing-Type Non-Linearity Using the Generalized Differential Quadrature Rule," J. Sound Vib., 237(5), pp. 805-817.
507. Chen, C.-N., 2001, "DQFEM Analyses of Static and Dynamic Nonlinear Elastic-Plastic Problems Using a GSR-Based Accelerated Constant Stiffness Equilibrium Iteration Technique," ASME J. Pressure Vessels Technol., 123(3), pp. 310-317.
508. Zhong, H., and Guo, Q., 2003, "Nonlinear Vibration Analysis of Timoshenko Beams Using theDifferential Quadrature Method," Nonlinear Dyn., 32(3), pp. 223-234.
509. Chen, R. P., Zhou, W. H., Wang, H. Z., and Chen, Y. M., 2005, "One-Dimensional Nonlinear Consolidation of Multi-Layered Soil by Differential Quadrature Method," Comput. Geotech., 32(5), pp. 358-369.
510. Li, J.-J., and Cheng, C.-J., 2005, "Differential Quadrature Method for Nonlinear Vibration of Orthotropic Plates With Finite Deformation and Transverse Shear Effect," J. Sound Vib., 281(1-2), pp. 295-309.
511. Malekzadeh, P., 2007, "A Differential Quadrature Nonlinear Free Vibration Analysis of Laminated Composite Skew Thin Plates," Thin-Walled Struct., 45(2), pp. 237-250.
512. Civalek, O., Ozturk, B., and Yavas, A., 2007, "Nonlinear Transient Dynamic Response of Clamped Rectangular Plates on Two-Parameter Foundations by the Algorithm of the Singular Convolution," Int. J. Sci. Technol., 2, pp. 165-177.
513. Liu, J., and Wang, X., 2008, "An Assessment of the Differential Quadrature Time Integration Scheme for Nonlinear Dynamic Equations," J. Sound Vib., 314(1-2), pp. 246-253.
514. Korkmaz, A., and Da-g,-I., 2008, "A Differential Quadrature Algorithm for Simulations of Nonlinear Schrodinger Equation," Comput. Math. Appl., 56(9), pp. 2222-2234.
515. Malekzadeh, P., 2008, "Differential Quadrature Large Amplitude Free Vibration Analysis of Laminated Skew Plates Based on FSDT," Compos. Struct., 83(2), pp. 189-200.
516. Liu, J., and Wang, X., 2008, "An Assessment of the Differential Quadrature Time Integration Scheme for Nonlinear Dynamic Equations," J. Sound Vib., 314(1-2), pp. 246-253.
517. Hu, Y.-J., Zhu, Y.-Y., and Cheng, C.-J., 2008, "Differential-Algebraic Approach to Large Deformation Analysis of Frame Structures Subjected to Dynamic Loads," Appl. Math. Mech., 29(4), pp. 441-452.
518. Ding, H., and Chen, L., 2009, "Nonlinear Dynamics of Axially Accelerating Viscoelastic Beams Based on Differential Quadrature," Acta Mech. Solida Sin., 22(3), pp. 267-275.
519. Fedotov, A. I., 2009, "Quadrature-Difference Methods for Solving Linear and Nonlinear Singular Integro-Differential Equations," Nonlinear Anal., 71(15), pp. e303-e308.
520. Li, J.-J., and Cheng, C.-J., 2010, "Differential Quadrature Method for Analyzing Nonlinear Dynamic Characteristics of Viscoelastic Plates With Shear Effects," Nonlinear Dyn., 61(1-2), pp. 57-70.
521. Hakimi, H., and Moradi, S., 2010, "Drillstring Vibration Analysis Using Differential Quadrature Method," J. Pet. Sci. Eng., 70(3-4), pp. 235-242.
522. Jian-She, P., Liu, Y., and Yang, J., 2010, "A Semi-Analytical Method for Nonlinear Vibration of Euler-Bernoulli Beams With General Boundary Conditions," Math. Probl. Eng., 2010, pp. 1-17.
523. Korkmaz, A., and Da-g,-I., 2011, "Polynomial Based Differential Quadrature Method for Numerical Solution of Nonlinear Burgers' Equation," J. Franklin Inst., 348(10), pp. 2863-2875.
524. Avazzadeh, Z., and Beygi Rizi, Z., Maalek Ghaini, F. M., and Loghmani, G. B., 2012, "A Numerical Solution of Nonlinear Parabolic-Type Volterra Partial Integro-Differential Equations Using Radial Basis Functions," Eng. Anal. Boundary Elem., 36(5), pp. 881-893.
525. Pekmen, B., and Tezer-Sezgin, M., 2012, "Differential Quadrature Solution of Nonlinear Klein-Gordon and Sine-Gordon Equations," Comput. Phys. Commun., 183(8), pp. 1702-1713.
526. Ansari, R., Gholami, R., Mohammadi, V., and Faghih Shojaei, M., 2012, "Size-Dependent Pull-In Instability of Hydrostatically and Electrostatically Actuated Circular Microplates," ASME J. Comput. Nonlinear Dyn., 8(2), p. 021015.
527. Jiwari, R., Mittal, R. C., and Sharma, K. K., 2013, "A Numerical Scheme Based on Weighted Average Differential Quadrature Method for the Numerical Solution of Burgers' Equation," Appl. Math. Comput., 219(12), pp. 6680-6691.
528. Zheng, G. Y., Li, P., and Zhao, C. Y., 2013, "Analysis of Non-Linear Consolidation of Soft Clay by Differential Quadrature Method," Appl. Clay Sci., 79, pp. 2-7.
529. Cigeroglu, E., and Samandari, H., 2014, "Nonlinear Free Vibrations of Curved Double Walled Carbon Nanotubes Using Differential Quadrature Method," Physica E, 64, pp. 95-105.
530. Salah, M., Amer, R. M., and Matbuly, M. S., 2014, "The Differential Quadrature Solution of Reaction-Diffusion Equation Using Explicit and Implicit Numerical Schemes," Appl. Math., 5, pp. 327-336.
531. He, B., and Wang, X., 1994, "Error Analysis in Differential Quadrature Method," Trans. Nanjing Univ. Aeronaut. Astronaut., 11, pp. 194-200.
532. Du, H., Lim, M. K., and Lin, R. M., 1994, "Application of Generalized Differential Quadrature Method to Structural Problems," Int. J. Numer. Methods Eng., 37(11), pp. 1881-1896.
533. Du, H., Lim, M. K., and Lin, R. M., 1995, "Application of Generalized Differential Quadrature to Vibration Analysis," J. Sound Vib., 181(2), pp. 279-293.
534. Malik, M., and Civan, F., 1995, "A Comparative Study of Differential Quadrature and Cubature Methods Vis-a-Vis Some Conventional Techniques in Context of Convection-Diffusion-Reaction Problems," Chem. Eng. Sci., 50(3), pp. 531-547.
535. Zong, Z., 2003, "A Variable Order Approach to Improve Differential Quadrature Accuracy in Dynamic Analysis," J. Sound Vib., 266(2), pp. 307-323.
536. Sadeghian, H., and Rezazadeh, G., 2009, "Comparison of Generalized Differential Quadrature and Galerkin Methods for the Analysis of Micro-Electro-Mechanical Coupled Systems," Commun. Nonlinear Sci. Numer. Simul., 14(6), pp. 2807-2816.
537. Xionghua, W., and Shen, Y., 2004, "Differential Quadrature Domain Decomposition Method for a Class of Parabolic Equations," Comput. Math. Appl., 48(12), pp. 1819-1832.
538. Wu, X., and Ren, Y.-E., 2006, "Boundary Reduction Technique and Triangular Differential Quadrature Domain Decomposition Method for Polygonal Region," Eng. Anal. Boundary Elem., 30(6), pp. 435-440.
539. Eftekhari, S. A., and Jafari, A. A., 2014, "A Mixed Modal-Differential Quadrature Method for Free and Forced Vibration of Beams in Contact With Fluid," Meccanica, 49(3), pp. 535-564.
540. Tornabene, F., Fantuzzi, N., and Bacciocchi, M., 2014, "The Strong Formulation Finite Element Method: Stability and Accuracy," Fract. Struct. Integr., 29, pp. 251-265.
541. Fantuzzi, N., Tornabene, F., Viola, E., and Ferreira, A. J. M., 2014, "A Strong Formulation Finite Element Method (SFEM) Based on RBF and GDQ Techniques for the Static and Dynamic Analyses of Laminated Plates of Arbitrary Shape," Meccanica, 49(10), pp. 2503-2542.
542. Tornabene, F., Fantuzzi, N., and Bacciocchi, M., 2014, "Free Vibrations of Free-Form Doubly-Curved Shells Made of Functionally Graded Materials Using Higher-Order Equivalent Single Layer Theories," Compos. Part B, 67, pp. 490-509.
543. Viola, E., Tornabene, F., and Fantuzzi, N., 2015, "Stress and Strain Recovery of Laminated Composite Doubly-Curved Shells and Panels Using Higher-Order Formulations," Key Eng. Mater., 624, pp. 205-213.
544. Tornabene, F., Fantuzzi, N., Viola, E., and Batra, R. C., 2015, "Stress and Strain Recovery for Functionally Graded Free-Form and Doubly-Curved Sandwich Shells Using Higher-Order Equivalent Single Layer Theory," Compos. Struct., 119, pp. 67-89.
545. Fantuzzi, N., Tornabene, F., and Viola, E., 2014, "Four-Parameter Functionally Graded Cracked Plates of Arbitrary Shape: A GDQFEM Solution for Free Vibrations," Mech. Adv. Mater. Struct., in press.
546. Weideman, J. A. C., and Reddy, S. C., 2000, "A MATLAB Differentiation Matrix Suite," ACM Trans. Math. Software, 26(4), pp. 465-519.
547. Reddy, J. N., 2004, Mechanics of Laminated Composites Plates and Shells, 2nd ed., CRC, NY.
548. Cottrell, J. A., Reali, A., Bazilevs, Y., and Hughes, T. J. R., 2006, "Isogeometric Analysis of Structural Vibrations," Comput. Methods Appl. Mech. Eng., 195(41-43), pp. 5257-5296.
549. Cottrell, J. A., Hughes, T. J. R., and Bazilevs, Y., 2009, Isogeometric Analysis. Toward Integration of CAD and FEA, Wiley, Chichester, West Sussex, UK.
550. Reali, A., 2006, "An Isogeometric Analysis Approach for the Study of Structural Vibrations," J. Earthquake Eng., 10, pp. 1-30.