Reinforcement of epoxy resin composites with fluorinated carbon nanotubes

Composites Science and Technology

Volumn 107, Issue , 2015, Pages 162-168

  Kharitonov, A P ^a,b   Simbirtseva, G V ^a   Tkachev, A G ^b   Blohin, A N ^b   Dyachkova, T P ^b   Maksimkin, A A ^c   Chukov, D I ^c  

^a SEMENOV INSTITUTE OF CHEMICAL PHYSICS   (Russian Federation)

^b TAMBOV STATE TECHNICAL UNIVERSITY   (Russian Federation)

^c NATIONAL UNIVERSITY OF SCIENCE AND TECHNOLOGY MISIS   (Russian Federation)

Author keywords

A. Carbon nanotubes; A. Particle reinforced composites; A. Polymers; B. Mechanical properties; Direct fluorination

Indexed keywords

BENDING STRENGTH; CARBON; CARBON NANOTUBES; ELECTRON MICROSCOPES; ELECTRON MICROSCOPY; FLUORINATION; FLUORINE; HALOGENATION; MECHANICAL PROPERTIES; PARTICLE REINFORCED COMPOSITES; POLYMER MATRIX COMPOSITES; REINFORCED PLASTICS; REINFORCEMENT; TENSILE STRENGTH; THERMODYNAMIC STABILITY; TURBOMACHINE BLADES; WIND TURBINES; YACHTS; YARN;

COMPOSITE TENSILE STRENGTH; DIRECT FLUORINATION; EPOXY RESIN COMPOSITES; FLUORINATED CARBON NANOTUBES; MICROSCOPY TECHNIQUE; POLYMER COMPOSITE; REINFORCED COMPOSITES; STRENGTH IMPROVEMENTS;

EPOXY RESINS;

EID: 84921047832     PISSN: 02663538     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compscitech.2014.12.002     Document Type: Article

References (38)

1. Davis D.C., Wilkerson J.W., Zhu J., Ayewah D.O.O. Improvements in mechanical properties of a carbon fiber epoxy composite using nanotube science and technology. Compos Struct 2010, 92(11):2653-2662.
2. Wu A.S., Chou T.-W. Carbon nanotube fibers for advanced composites. Mater Today 2012, 15(7-8):302-310.
3. Paul D.R., Robeson L.M. Polymer nanotechnology: nanocomposites. Polymer 2008, 49(15):3187-3204.
4. Potts J.R., Dreyer D.R., Bielawski C.W., Ruof R.S. Graphene-based polymer nanocomposites. Polymer 2011, 52(1):5-25.
5. Liu L.Q., Wagner H.D. Rubbery and glassy epoxy resins reinforced with carbon nanotubes. Compos Sci Technol 2005, 65(11-12):1861-1868.
6. Mickelson E.T., Chiang I.W., Zimmerman J.L., et al. Solvation of fluorinated single-wall carbon nanotubes in alcohol solvents. J Phys Chem B 1999, 103(21):4318.
7. Krestinin A.V., Kharitonov A.P., Shul'ga Yu M., Zhigalina O.M., Knerel'man E.I., Dubois M., et al. Fabrication and characterization of fluorinated single-walled carbon nanotubes. Nanotechnol Russ 2009, 4(1):60-78.
8. Zhang W., Dubois M., Guérin K., Bonnet P., Kharbache H., Masin F., et al. Effect of curvature on CF bonding in fluorinated carbons: from fullerene and derivatives to graphite. Phys Chem Chem Phys 2010, 12:1388-1398.
9. Zhang W., Spinelle L., Dubois M., Guérin K., Kharbache H., Masin F., et al. New synthesis methods for fluorinated carbon nanofibres and applications. J Fluorine Chem 2010, 131(6):676-683.
10. Ahmad Y., Dubois M., Guérin K., Hamwi A., Fawal Z., Kharitonov A.P., et al. NMR and NEXAFS study of various graphite fluorides. J Phys Chem C 2013, 117(26):13564-13572.
11. Shulga Y.M., Martynenko V.M., Krestinin A.V., Kharitonov A.P., Davidova G.I., Knerelman E.I., et al. Mass-spectrometric investigation of gases evolved by fluorinated single-wall carbon nanotubes during heating. Int J Hydrogen Energy 2011, 36:1349-1354.
12. Geng H., Rosen R., Zheng B., Shimoda H., Fleming L., Liu J., et al. Fabrication and properties of composites of poly(ethylene oxide) and functionalized carbon nanotubes. Adv Mater 2002, 14(19):1387-1390.
13. Rangari V.K., Yousuf M., Jeelani S., Pulikkathara M.X., Khabashesku V.N. Alignment of carbon nanotubes and reinforcing effects in nylon-6 polymer composite fibers. Nanotechnology 2008, 19(24):245703.
14. McIntosh D., Khabashesku V.N., Barrera E.V. Nanocomposite fiber systems processed from fluorinated single-walled carbon nanotubes and a polypropylene matrix. Chem Mater 2006, 18(19):4561-4569.
15. Lee Y.S., Cho T.H., Lee B.K., Rho J.S., An K.H., Lee Y.H. Surface properties of fluorinated single-walled carbon nanotubes. J Fluorine Chem 2003, 120:99-104.
16. Socrates G. Infrared characteristic group frequences 2001, John Wiley & Sons, Chichester; N.Y.; Brisbane; Weinheim, Toronto, Brisbane, Singapore. 3rd ed.
17. Lee J.-M., Kim S.J., Kim J.W., Kang P.H., Nho Y.C., Lee Y.-S. A high resolution XPS study of sidewall functionalized MWCNTs by fluorination. J Ind Eng Chem 2009, 15(1):66-71.
18. Crassous I., Groult H., Lantelme F., Devilliers D., Tressaud A., Labrugere C., et al. Study of the fluorination of carbon anode in molten KF-2HF by XPS and NMR investigations. J Fluorine Chem 2009, 130(12):1080-1108.
19. Yang Z., McElrath K., Bahr J., D'Souza N.A. Effect of matrix glass transition on reinforcement efficiency of epoxy-matrix composites with single walled and multi-walled carbon nanotubes, carbon nanofibers and graphite. Composites: Part B 2012, 43(4):2079-2089.
20. Höhne G, Hemminger WF, Flammersheim H-J. Differential scanning calorimetry. 2nd rev. a. enlarged ed; Springer, 2003, XII, 298 p.
21. Mirmohseni Abdolreza, Zavareh Siamak Epoxy/acrylonitrile-butadiene-styrene copolymer/clay ternary nanocomposite as impact toughened epoxy. J Polym Res 2010, 17(1):191-201.
22. Rana S., Alagirusamy R., Fangueiro R., et al. Effect of carbon nanofiber functionalization on the inplane mechanical properties of carbon/epoxy multiscale composites. J Appl Polym Sci 2012, 125(3):1951-1958.
23. Nie Y., Hubert T. Effect of carbon nanofiber (CNF) silanization on the properties of CNF/epoxy nanocomposites. Polym Int 2011, 60(11):1574-1580.
24. Rana S., Alagirusamy R., Joshi M. Effect of carbon nanofiber dispersion on the tensile properties of epoxy nanocomposites. J Compos Mater 2011, 45:2247-2256.
25. Chaos-Moran R., Salazar A., Urena A. Mechanical analysis of carbon nanofiber/epoxy resin composites. Polym Compos 2011, 32(10):1640-1651.
26. Rana S., Alagirusamy R., Joshi M. Mechanical behavior of carbon nanofibre-reinforced epoxy composites. J Appl Polym Sci 2010, 118(4):2276-2283.
27. Ahn S.-N., Lee H.-J., Kim B.-J., et al. Epoxy/amine-functionalized short-length vapor-grown carbon nanofiber composites. J Polym Sci Part A - Polym Chem 2008, 46(22):7473-7482.
28. Zhou Y., Pervin F., Jeelani S., et al. Improvement in mechanical properties of carbon fabric-epoxy composite using carbon nanofibers. J Mater Proc Technol 2008, 198(1-2):445-453.
29. Kim J.A., Seong D.G., Kang T.J., Youn J.R. Effects of surface modification on rheological and mechanical properties of CNT/epoxy composites. Carbon 2006, 44(10):1898-1905.
30. Gojny F.H., Wichmann M.H.G., Fiedler B., Schulte K. Influence of different carbon nanotubes on the mechanical properties of epoxy matrix composites - a comparative study. Compos Sci Technol 2005, 65(15-16):2300-2313.
31. de Villoria R.G., Miravete A., Cuartero J., Chiminelli A., Tolosana N. Mechanical properties of SWNT/epoxy composites using two different curing cycles. Compos Part B: Eng 2006, 37(4-5):273-277.
32. Ci L., Bai J. The reinforcement role of carbon nanotubes in epoxy composites with different matrix stiffness. Compos Sci Technol 2006, 66(3-4):599-603.
33. Ma P.-C., Mo S.-Y., Tang B.-Z., Kim J.-K. Dispersion, interfacial interaction and re-agglomeration of functionalized carbon nanotubes in epoxy composites. Carbon 2010, 48(6):1824-1834.
34. Ma P.-C., Mo S.-Y., Tang B.-Z., Kim J.-K. Flexural, compression, chemical resistance, and morphology studies on granite powder-filled epoxy and acrylonitrile butadiene styrene-toughened epoxy matrices. J Appl Polym Sci 2007, 104(1):171-177.
35. Patton R.D., Pittman C.U., Wang L., Hill J.R. Vapor grown carbon fiber composites with epoxy and poly(phenylene sulfide) matrices. Compos Part A: Appl Sci Manuf 1999, 30(9):1081-1091.
36. Xu J., Donohoe J.P., Pittman C.U. Preparation, electrical and mechanical properties of vapor grown carbon fiber (VGCF)/vinyl ester composites. Compos Part A: Appl Sci Manuf 2004, 35(6):693-701.
37. Lau K.-T., Lu M., Lam C.-K., Cheung H.-Y., Sheng F.-L., Li H.-L. Thermal and mechanical properties of single-walled carbon nanotube bundle-reinforced epoxy nanocomposites: the role of solvent for nanotube dispersion. Compos Sci Technol 2005, 65(5):719-725. [Special Issue: SI].
38. Khalil H.P.S.A., Foroozian P., Bakare I.O., Akil H.M., Noor A.M. Exploring biomass based carbon black as fille in epoxy composite: flexural and thermal properties. Mater Des 2010, 31(7):3419-3425.