Optimizing sol–gel synthesis of magnesia-stabilized zirconia (MSZ) nanoparticles using Taguchi robust design for thermal barrier coatings (TBCs) applications

Journal of Sol-Gel Science and Technology

Volumn 73, Issue 1, 2015, Pages 227-241

  Hajizadeh Oghaz, Morteza ^a   Shoja Razavi, Reza ^a   Khajelakzay, Mohammad ^a  

^a MALEK ASHTAR UNIVERSITY OF TECHNOLOGY   (Iran)

Author keywords

Magnesia stabilized zirconia; Nanostructured materials; Pechini method; Sol gel process; Taguchi design

Indexed keywords

CITRIC ACID; DIFFERENTIAL THERMAL ANALYSIS; ELECTRON EMISSION; ETHYLENE; ETHYLENE GLYCOL; HIGH RESOLUTION TRANSMISSION ELECTRON MICROSCOPY; MAGNESIA; MOLAR RATIO; NANOCRYSTALLINE MATERIALS; NANOCRYSTALS; NANOSTRUCTURED MATERIALS; PARTICLE SIZE; POWDER METALS; SCANNING ELECTRON MICROSCOPY; SOLS; SYNTHESIS (CHEMICAL); TAGUCHI METHODS; THERMAL BARRIER COATINGS; THERMOGRAVIMETRIC ANALYSIS; TRANSITION METALS; ZIRCONIA;

CALCINATION TEMPERATURE; FIELD EMISSION SCANNING ELECTRON MICROSCOPES; GEL PROCESS; PECHINI METHOD; STABILIZED ZIRCONIA; TAGUCHI DESIGN; TAGUCHI EXPERIMENT DESIGNS; THERMAL BARRIER COATING (TBCS);

PARTICLE SIZE ANALYSIS;

EID: 84920856082     PISSN: 09280707     EISSN: 15734846     Source Type: Journal    
DOI: 10.1007/s10971-014-3521-3     Document Type: Article

References (63)

1. Nelson WA, Orenstein RM (1997) TBC experience in land-based gas turbines. J Therm Spray Technol 6(2):176–180
2. 3-stabilized zirconia thermal barrier coatings—crystal habit and phase composition. Surf Coat Technol 82(3):259–269
3. Bennett A (1986) Properties of thermal barrier coatings. Mater Sci Technol 2(3):257–261
4. Brandon J, Taylor R (1989) Thermal properties of ceria and yttria partially stabilized zirconia thermal barrier coatings. Surf Coat Technol 39:143–151
5. Steffens H-D, Fischer U (1987) Characterization and thermal shock testing of Yttria-stabilized zirconia coatings. Surf Coat Technol 32(1):327–338
6. 2–24MgO ceramic coating by eddy current method. Comput Mater Sci 44(3):1007–1012
7. Strangman TE (1985) Thermal barrier coatings for turbine airfoils. Thin Solid Films 127(1):93–106
8. Kvernes I (1979) Ceramic coatings on diesel engine components. In: Kvernes I et al (eds) Central Institute for Industrial Research, Oslo, Norway, Dec 1979. From conference on advanced materials for alternate fuel capable directly fired heat engines, pp 233–257
9. Jamali H, Mozafarinia R, Shoja-Razavi R, Ahmadi-Pidani R (2014) Comparison of hot corrosion behaviors of plasma-sprayed nanostructured and conventional YSZ thermal barrier coatings exposure to molten vanadium pentoxide and sodium sulfate. J Eur Ceram Soc 34(2):485–492
10. 3 coatings for TBC applications by employing differential sintering. J Therm Spray Technol 17(5–6):846–852
11. Zhu D, Miller RA (2004) Development of advanced low conductivity thermal barrier coatings. Int J Appl Ceram Technol 1(1):86–94
12. 2·MgO fibres by alkoxide sol–gel processing. Ceram Int 18(1):43–49
13. 2 precursor powders prepared by in situ peptisation of coprecipitated oxalate gel. Ceram Int 26(5):517–521
14. Muccillo R, Saito N, Muccillo E (1995) Properties of zirconia–magnesia solid electrolytes prepared by the citrate method. Mater Lett 25(3):165–169
15. 2–MgO solid solutions by citrate gel process. Mater Sci Eng B 148(1):226–229
16. 17O MAS NMR study of calcia, magnesia, scandia and yttria stabilized zirconia. Solid State Ion 178(27):1499–1506
17. 2—MgO processed from liquid precursors. J Am Ceram Soc 75(4):946–952
18. 2 by polymeric precursor techniques. Mater Lett 53(4):353–358
19. Kim KD, Choi DW, Choa Y-H, Kim HT (2007) Optimization of parameters for the synthesis of zinc oxide nanoparticles by Taguchi robust design method. Colloids Surf A 311(1):170–173
20. Oghaz MH, Razavi RS, Estark ML, Ghasemi R (2013) Optimization of morphology and particle size of modified sol–gel synthesized YSZ nanopowder using Taguchi method. J Nano Res 21:65–70
21. Kim SM, Park KS, Kim KD, Park SD, Kim HT (2009) Optimization of parameters for the synthesis of bimodal Ag nanoparticles by Taguchi method. J Ind Eng Chem 15(6):894–897
22. Sadat-Shojai M, Khorasani M-T, Jamshidi A (2012) Hydrothermal processing of hydroxyapatite nanoparticles—a Taguchi experimental design approach. J Cryst Growth 361:73–84
23. 16 array. Mater Res Bull 46(10):1615–1624
24. Hou T-H, Su C-H, Liu W-L (2007) Parameters optimization of a nano-particle wet milling process using the Taguchi method, response surface method and genetic algorithm. Powder Technol 173(3):153–162
25. Akhgar B, Pazouki M, Ranjbar M, Hosseinnia A, Salarian R (2012) Application of Taguchi method for optimization of synthetic rutile nano powder preparation from ilmenite concentrate. Chem Eng Res Des 90(2):220–228
26. 12 phosphor using the Taguchi method. Adv Powder Technol 23(1):97–103
27. 2 nanoparticles by hydrolysis of TEOT in micelles. Colloids Surf A 254(1):99–105
28. Shamsipur M, Pourmortazavi SM, Hajimirsadeghi SS, Roushani M (2013) Applying Taguchi robust design to the optimization of synthesis of barium carbonate nanorods via direct precipitation. Colloids Surf A Physicochem Eng Asp 423:35–41
29. Biabani A, Rezaei M, Fattah Z (2012) Optimization of preparation conditions of Fe–Co nanoparticles in low-temperature CO oxidation reaction by taguchi design method. J Nat Gas Chem 21(4):415–420
30. Pourmortazavi SM, Hajimirsadeghi SS, Rahimi-Nasrabadi M, Zahedi MM (2012) Taguchi robust design to optimize synthesis of lead oxalate nano-disks. Mater Sci Semicond Process 16(1):131–137
31. Kim KD, Han DN, Kim HT (2004) Optimization of experimental conditions based on the Taguchi robust design for the formation of nano-sized silver particles by chemical reduction method. Chem Eng J 104(1):55–61
32. Abrishamkar M, Azizi SN, Kazemian H (2011) Using Taguchi robust design method to develop an optimized synthesis procedure for nanocrystals of ZSM-5 zeolite. Zeitschrift für anorganische und allgemeine Chemie 637(1):154–159
33. Edrissi M, Norouzbeigi R (2008) Taguchi optimization for combustion synthesis of aluminum oxide nano-particles. Chin J Chem 26(8):1401–1406
34. Norouzbeigi R, Edrissi M (2011) Preparation of nano alumina powder via combustion synthesis: porous structure optimization via taguchi L16 design. J Am Ceram Soc 94(11):4052–4058
35. Shadpour H, Edrissi M, Zanjanchi MA (2002) Preparation and characterization of CoxMnmCrnNikFe3-(x + m + n + k) O4 ferrites and optimization of their structural and magnetic properties by Taguchi experimental design. J Mater Sci Mater Electron 13(3):139–148
36. Montgomery DC, Montgomery DC, Montgomery DC (1997) Design and analysis of experiments, vol 7. Wiley, New York
37. 3 via a polymerization route. Mater Res Bull 36(12):2083–2101. doi:10.1016/S0025-5408(01)00723-1
38. Laberty-Robert C, Ansart F, Castillo S, Richard G (2002) Synthesis of YSZ powders by the sol–gel method: surfactant effects on the morphology. Solid State Sci 4(8):1053–1059
39. Lessing PA (1989) Mixed-cation oxide powders via polymeric precursors. Am Ceram Soc Bull 68(5):1002–1007
40. Tai L-W, Lessing PA (1992) Modified resin-intermediate processing of perovskite powders: part I. Optimization of polymeric precursors. J Mater Res 7(2):502–510
41. 2 powder by use of polymeric precursor based on Pechini process. J Mater Sci 36(15):3825–3830
42. Jones RL (1996) Experiences in seeking stabilizers for zirconia having hot corrosion-resistance and high temperature tetragonal (t’) stability. DTIC document
43. Buyakova S, Promakhov V, Kulkov S (2012) Thermal tests and their effect on the micro-and macrostructure of nanocrystalline ZrO2. Powder Metall Met Ceram 51(5–6):267–272
44. Meier SM, Gupta DK, Sheffler KD (1991) Ceramic thermal barrier coatings for commercial gas turbine engines. JOM 43(3):50–53
45. Martin G, Bellon P (1996) Driven alloys. Solid State Phys 50:189–331
46. Lipkin DM, Krogstad JA, Gao Y, Johnson CA, Nelson WA, Levi CG (2013) Phase evolution upon aging of air-plasma sprayed t′-zirconia coatings: I—synchrotron X-ray diffraction. J Am Ceram Soc 96(1):290–298
47. Brandont J, Taylor R (1991) Phase stability of zirconia-based thermal barrier coatings Part I. Zirconia–yttria alloys. Surf Coat Technol 46:75–90
48. Rebollo NR, Gandhi AS, Levi CG (2003) Phase stability issues in emerging TBC systems. High Temp Corros Mater Chem IV 2003:431–442
49. Leoni M, Jones R, Scardi P (1998) Phase stability of scandia–yttria-stabilized zirconia TBCs. Surf Coat Technol 108:107–113
50. Langjahr PA, Oberacker R, Hoffmann MJ (2001) Long-term behavior and application limits of plasma-sprayed zirconia thermal barrier coatings. J Am Ceram Soc 84(6):1301–1308
51. Suryanarayana C (2004) Mechanical alloying and milling. CRC Press, Boca Raton
52. 2 and its effect on grain growth. Acta Metall Mater 42(6):1829–1846
53. Taguchi G (1986) Introduction to quality engineering: designing quality into products and processes. ARRB Group Limited
54. Fowlkes WY, Creveling CM, Derimiggio J (1995) Engineering methods for robust product design: using Taguchi methods in technology and product development. Addison-Wesley, Reading
55. 2 solid solution. Microporous Mesoporous Mater 143(2):357–361
56. Srinivasan R, De Angelis RJ, Ice G, Davis BH (1991) Identification of tetragonal and cubic structures of zirconia using synchrotron x-radiation source. J Mater Res 6(6):1287–1292
57. Garvie R, Hannink R, Pascoe R (1975) Ceramic steel? Nature 258:703–704
58. Miller RA, Berndt CC (1984) Performance of thermal barrier coatings in high heat flux environments. Thin Solid Films 119(2):195–202
59. Clarke DR (2003) Materials selection guidelines for low thermal conductivity thermal barrier coatings. Surf Coat Technol 163:67–74
60. Ahmaniemi S, Vuoristo P, Mäntylä T, Cernuschi F, Lorenzoni L (2004) Modified thick thermal barrier coatings: thermophysical characterization. J Eur Ceram Soc 24(9):2669–2679
61. Soyez G, Eastman JA, Thompson LJ, Bai G-R, Baldo PM, McCormick AW, DiMelfi RJ, Elmustafa AA, Tambwe MF, Stone DS (2000) Grain-size-dependent thermal conductivity of nanocrystalline yttria-stabilized zirconia films grown by metal-organic chemical vapor deposition. Appl Phys Lett 77(8):1155–1157
62. Rauf A, Yu Q, Jin L, Zhou C (2012) Microstructure and thermal properties of nanostructured lanthana-doped yttria-stabilized zirconia thermal barrier coatings by air plasma spraying. Scripta Mater 66(2):109–112
63. Guo X (1997) Space-charge conduction in yttria and alumina codoped-zirconia 1. Solid State Ion 96(3):247–254