Thermal shock resistivity of hybrid carbon foam materials: Experiments and model predictions

Mechanics of Materials

Volumn 82, Issue , 2015, Pages 13-27

  Jung, A ^a   Falk, G ^a   Petri, D ^a   Diebels, S ^a  

^a SAARLAND UNIVERSITY   (Germany)

Author keywords

Carbon hybrid foam; FEM modeling; Thermal shock; Thermomechanical behavior

Indexed keywords

CARBON; CARBON SILICON CARBIDE COMPOSITES; COMPUTATIONAL METHODS; CRACKS; FINITE ELEMENT METHOD; HYBRID MATERIALS; MAGNESIA; REFRACTORY MATERIALS; SHOCK PROBLEMS; SILICON CARBIDE; STRUTS; THERMAL SHOCK; YTTRIA STABILIZED ZIRCONIA; ZIRCONIA;

COMPUTATIONAL INVESTIGATION; FEM MODELING; HYBRID FOAMS; MICROSTRUCTURAL PARAMETERS; SILICON CARBIDE COATINGS; THERMAL AND MECHANICAL LOADS; THERMO-MECHANICAL BEHAVIORS; YTTRIA-STABILIZED ZIRCONIAS (YSZ);

FOAMS;

EID: 84920193855     PISSN: 01676636     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.mechmat.2014.12.007     Document Type: Article

References (82)

1. K. Andreev, and H. Harmuth FEM simulation of the thermo-mechanical behaviour and failure of refractories - a case study J. Mater. Process. Technol. 143-144 1 2003 72 77
2. M. Bag, S. Adak, and R. Sarkar Study on low carbon containing mgo-c refractory: use of nano carbon Ceram. Int. 38 2012 2339 2346
3. H.-A. Bahr, H. Balke, M. Kuna, and H. Liesk Fracture analysis of a single edge cracked strip under thermal shock Theoret. Appl. Fract. Mech. 8 1 1987 33 39
4. H. Balke, I. Hofinger, C. Husler, H.-A. Bahr, H.-J. Wei, and G. Kirchhoff Fracture mechanical damage modelling of thermal barrier coatings Arch. Appl. Mech. 70 1-3 2000 193 200
5. F. Bradley, A. Chaklader, and A. Mitchell Thermal stress fracture of refractory lining components: part i. Thermoelastic analysis Metall. Trans. B 18 2 1987 355 363
6. A. Celzard, G. Tondi, D. Lacroix, G. Jeandel, B. Monod, V. Fierro, and A. Pizzi Radiative properties of tannin-based, glasslike, carbon foams Carbon 50 2012 4102 4113
7. R. Ceylantekin, and C. Aksel Improvements on the mechanical properties and thermal shock behaviours of mgo-spinel composite refractories by zro2 incorporation Ceram. Int. 38 2012 995 1002
8. C. Chen, E.B. Kennel, A.H. Stiller, P.G. Stansberry, and J.W. Zondlo Carbon foam derived from various precursors Carbon 44 2006 1535 1543
9. Y. Chen, B.-Z. Chen, X.-C. Shi, H. Xu, Y.-J. Hu, Y. Yuan, and N.-B. Shen Preparation of pitch-based carbon foam using polyurethane foam template Carbon 45 2007 2126 2139
10. R.M. Christensen Mechanics of low density materials J. Mech. Phys. Solids 34 1986 563 578
11. W.O. Cotterel, B. amd Sze, and Q. Caidong Thermal shock and size effects in castable refractories J. Am. Ceram. Soc. 78 1995 2056 2064
12. F. Damhof, W.A.M. Brekelmans, and M.G.D. Geers Non-local modeling of thermal shock damage in refractory materials Eng. Fract. Mech. 75 2008 4706 4720
13. F. Damhof, W.A.M. Brekelmans, and M.G.D. Geers Non-local modelling of cyclic thermal shock damage including parameter estimation Eng. Fract. Mech. 78 2011 1846 1861
14. F. Damhof, W.A.M. Brekelmans, and M.G.D. Geers Predictive FEM simulation of thermal shock damage in the refractory lining of steelmaking installations J. Mat. Proc. Tech. 211 2011 2091 2105
15. S. Demiray, W. Becker, and J. Hohe Analysis of two- and three-dimensional hyperelastic model foams under complex loading conditions Mech. Ma 38 2006 985 1000
16. S. Demiray, W. Becker, and J. Hohe Numerical determination of initial and subsequent yield surfaces of open-celled model foams Int. J. Solid Struct. 44 2007 2093 2108
17. V.S. Deshpande, and N.A. Fleck Isotropic constitutive models for metallic foams J. Mech. Phys. Solids 48 6-7 2000 1253 1283
18. S. Diebels A macroscopic description of the quasi-static behaviour of granular materials based on the theory of porous media Granul. Matter 2 2000 142 152
19. S. Diebels, and W. Ehlers Homogenization method for granular assemblies W.A. Wall, K.U. Bletzinger, K. Schweizerhof, Proceedings of 'Trends in Computational Structural Mechanics' 2001 CIMNE Barcelona, Spain 79 88
20. S. Diebels, and H. Steeb The size effect in foams and its theoretical and numerical investigation Proc. R. Soc. Lond. Ser. A 458 2028 2002 2869 2883
21. Diebels, S.; 2001. Erweiterte Kontinuumstheorien zur Modellierung poröser Materialien. In: Ehlers, W.; Diebels S. (Eds.). Poröse Medien 2001. CD-ROM Proceedings des Workshops Poröse Medien 2001. Beitrag P01. Institut für Mechanik (Bauwesen) Nr. 01-II-10. Universität Stuttgart.
22. Diebels, S.; Steeb, H.; Ebinger, T.; Ehlers, W.; 2002. Modelling and homogenization of foams. In: DYNAMore (Ed.), LS-DYNA Forum 2002. CD-ROM Proceedings V37, DYNAMore GmbH, Stuttgart.
23. Diebels, S.; Steeb, H.; Ehlers, W.; 2003. Microscopic and macroscopic modelling of foams 2. pp. 156-157.
24. L.S. Dubrovinsky, and S.K. Saxena Thermal expansion of periclase (mgo) and tungsten (w) to melting temperatures Phys. Chem. Minerals 24 1997 547 550
25. T. Ebinger, H. Steeb, and S. Diebels Modeling and homogenization of foams Comput. Ass. Mech. Eng. Sci. 12 2005 49 63
26. W. Ehlers A single-surface yield function for geomaterials Arch. Appl. Mech. 65 4 1995 246 259
27. Ehlers, W.; 1993. Constitutive equations for granular materials in geomechanical context. In: Hutter K. (Ed.). Continuum Mechanics in Environmental Sciences. vol. 337 of CISM International centre for Mechanical Sciences, pp. 313-402.
28. N. Fleck, and J. Willis Bounds and estimates for the effect of strain gradients upon the effective plastic properties of an isotropic two-phase composite J. Mech. Phys. Solids 52 2004 1855 1888
29. D. Gaies, and K. Faber Thermal properties of pitch-derived graphite foam Carbon 40 2002 1131 1150
30. N.C. Gallego, and J.W. Klett Carbon foams for thermal management Carbon 41 2003 1461 1466
31. A.N. Gent, and A.G. Thomas J. Appl. Polym. Sci. 1 1959 107
32. L.J. Gibson, M.F. Ashby, G.S. Schajer, and C.I. Robertson The mechanics of two-dimensional cellular materials Proc. R. Soc. Lond. Ser. 382 1982 25 42
33. R. Grasset-Bourdel, A. Alzina, M. Huger, D. Gruber, H. Harmuth, and T. Chotard Influence of thermal damage occurrence at microstructural scale on the thermomechanical behaviour of magnesia-spinel refractories J. Eur. Ceram. Soc. 32 2012 989 999
34. D. Gruber, K. Andreev, and H. Harmuth FEM simulation of the thermomechanical behaviour of the refractory lining of a blast furnace J. Mater. Process. Technol. 155-156 1-3 2004 1539 1543
35. H. Harmuth, K. Rieder, M. Krobath, and E. Tschegg Investigation of the nonlinear fracture behaviour of ordinary ceramic refractory materials Mat. Sci. Eng. A 214 1996 53 61
36. H. Hartmuth, and E.K. Tschegg A fracture mechanics approach for the development of refractory materials with reduced brittleness Fatigue Fract. Eng. Mater. Struct. 20 11 1997 1585 1603
37. D.P.H. Hasselman, and G.E. Youngblood Enhanced thermal stress resistance of structural ceramics with thermal conductivity gradient J. Am. Ceram. Soc. 61 1-2 1978 49 52
38. Hasselman, D.P.H.; Badaliance, R.; Chen, E.P.; 1976. Thermal Fatigue and Its Failure Prediction for Brittle Ceramics. pp. 55-67.
39. D.P.H. Hasselman Unified theory of thermal shock fracture initiation and crack propagation in brittle ceramics J. Am Ceram. Soc. 52 11 1969 600 604
40. D.P.H. Hasselman Strength behavior of polycrystalline alumina subjected to thermal shock J. Am. Ceram. Soc. 53 9 1970 490 495
41. Headrick, W.L.; Karukus, M.; Laing, X.; 2006. Refractory for black liquor gasifiers. University of Missouri-Rolla. DOE Award Number DE-FC26-02NT41491.
42. J. Hohe, and W. Becker Effective mechanical behavior of hyperelastic honeycombs and two-dimensional model foams at finite strain Int. J. Mech. Sci. 45 2003 891 913
43. M. Inagaki, T. Morishita, A. Kuno, T. Kito, M. Hirano, T. Suwa, and K. Kusakawa Carbon foams prepared from polyimide using urethane foam template Carbon 42 2004 497 502
44. H. Jansen Bonding of mgo-c-bricks by catalytically activated resin Stahl Eisen 127 5 2007 69 76
45. J.-W. Jiang, J.-S. Wang, and B. Li Thermal expansion in single-walled carbon nanotubes and graphene: nonequilibrium Green's function approach Phys. Rev. B 80 2009 205429
46. Klett, J.; Lowden, R.; McMillan, A.; 2001. Oxidation protection of graphite foams. Tech. rep.
47. J. Knauder, and R. Rathner Thermomechanical analysis of basic refractories in a bottom blowing converter Veitsch-Radex Rundschau 4 1990 354 364
48. J. Knauder, and R. Rathner Improved design of a bof lining based on thermomechanical analysis Veitsch-Radex Rundschau 1 1990 203 212
49. Y.R. Krass World production of steel and magnesia refractories: state of the art and trends of development Refract. Ind. Ceram. 42 11-12 2001 417 425
50. B.A. Latella, and T. Liu The initiation and propagation of thermal shock cracks in graphite Carbon 44 2006 3043 3048
51. S. Lei, Q. Guo, J. Shi, and L. Liu Preparation of phenolic-based carbon foam with controllable pore structure and high compressive strength Carbon 48 2010 2644 2673
52. S. Li, Y. Tian, Y. Zhong, X. Yan, Y. Song, Q. Guo, J. Shi, and L. Liu Formation mechanism of carbon foams derived from mesophase pitch Carbon 49 2011 618 624
53. X. Li, M. Basso, F. Braghiroli, V. Fierro, A. Pizzi, and A. Celzard Tailoring the structure of cellular vitreous carbon foams Carbon 50 2012 2026 2036
54. T.J. Lu, and N.A. Fleck The thermal shock resistance of solids Acta Mater. 46 13 1998 4755 4768
55. T.J. Lu, and N.A. Fleck The thermal shock resistance of solids Acta Mater. 46 13 1998 4755 4768
56. B. Luccioni, M. Figueroa, and R. Danesi Thermo-mechanic model for concrete exposed to elevated temperatures Eng. Struct. 25 6 2003 729 742
57. S.A. Meguid, S.S. Cheon, and N. El-Abbasi Fe modelling of deformation localization in metallic foams Finite Elem. Anal. Des. 38 2002 631643
58. H. Mei, L. Cheng, L. Zhang, and Y. Xu Modeling the effects of thermal and mechanical load cycling on a c/sic composite in oxygen/argon mixtures Carbon 45 2007 2195 2204
59. W. Nechnech, F. Meftah, and J. Reynouard An elasto-plastic damage model for plain concrete subjected to high temperatures Eng. Struct. 24 5 2002 597 611
60. T.G. Nieh, K. Higashi, and J. Wadsworth Effect of cell morphology on the compressive properties of open-cell aluminum foams Mater. Sci. Eng. A 283 1-2 2000 105 110
61. P.R. Onck, E.W. Andrews, and L.J. Gibson Size effects in ductile cellular solids. Part I: modeling Int. J. Mech. Sci. 43 3 2001 681 699
62. R.M. Orenstein, and D.J. Green Thermal shock behavior of open-cell ceramic foams J. Am. Ceram. Soc. 75 7 1992 1899 1905
63. W. Pabst, E. Gregorova, and G. Ticha Elasticity of porous ceramics - a critical study of modulus-porosity relations J. Eur. Ceram. Soc. 26 2006 1085 1097
64. C. Pearce, C. Nielsen, and N. Biani Gradient enhanced thermo-mechanical damage model for concrete at high temperatures including transient thermal creep Int. J. Numer. Anal. Meth. Geomech. 28 7-8 2004 715 735
65. V.A. Perepelitsyn, and V.G. Kutalov Efficient refractory materials for metallurgy and casting production Refract. Ind. Ceram. 53 1 2012 50 53
66. N. Prompt, and E. Ouedraogo High temperature mechanical characterisation of an alumina refractory concrete for blast furnace main trough. Part I. General context J. Eur. Ceram. Soc. 28 15 2008 2859 2865
67. H. Qiu, L. Han, and L. Liu Properties and microstructure of graphitised zrc/c or sic/c composites Carbon 43 2005 1021 1025
68. R. Rathner, J.P. Knauder, and H.F. Schweiger Lining design and behavior of bof's Veitsch-Radex Rundschau 4 1990 327 342
69. V.R. Salvini, V.C. Pandolfelli, and R.C. Bradt Extension of Hasselman's thermal shock theory for crack/microstructure interactions in refractories Ceram. Int. 38 2012 5369 5375
70. J. Sanchez-Coronado, and D.D.L. Chung Thermomechanical behavior of a graphite foam Carbon 41 2003 1175 1180
71. N. Schmitt, A. Burr, Y. Berthaud, and J. Poirier Micromechanics applied to the thermal shock behavior of refractory ceramics Mech. Mater. 34 2002 725 747
72. W.d. Silveira, and G. Falk Reinforced cellular carbon matrix-mgo composites for high temperature applications: microstructure aspects and colloidal processing Adv. Eng. Mat. 13 11 2011 982 989
73. W.D. Silveira, and G. Falk Production of refractory materials with cellular matrix by colloidal processing Refract. Worldforum 4 1 2012 143 150
74. W. Soboyejo, C. Mercer, J. Schymanski, and S. Van Der Laan Investigation of thermal shock in a high-temperature refractory ceramic: a fracture mechanics approach J. Am. Ceram. Soc. 84 6 2001 1309 1314
75. J. Stabler, and G. Baker Fractional step methods for thermo-mechanical damage analyses at transient elevated temperatures Int. J. Num. Meth. Eng. 48 2000 761 785
76. J. Stabler, and G. Baker On the form of free energy and specific heat in coupled thermo-elasticity with isotropic damage Int. J. Solids Struct. 37 34 2000 4691 4713
77. J. Stabler, and G. Baker Fractional step methods for thermo-mechanical damage analyses at transient elevated temperatures Int. J. Numer. Meth. Eng. 48 5 2000 761 785
78. S.A. Suvorov, A.V. Mozhzherin, A.V. Sakulin, V.G. Ordin, and E.V. Rusinova Functional carbonized refractories Refract. Ind. Ceram. 46 4 2005 268 272
79. M.V. Swain R-curve behavior and thermal shock resistance of ceramics J. Am. Ceram. Soc. 73 3 1990 621 628
80. C. Tekoglu, L.J. Gibson, T. Pardoen, and P.R. Onck Size effects in foams: experiments and modeling J. Appl. Phys. 56 2 2011 109 138
81. W.E. Warren, and A.M. Kraynik The linear elastic properties of open-cell foams J. Appl. Mech. 55 1988 341 346
82. T.V. Yarushina, V.A. Akbashev, V.A. Plyukhin, A.M. Akbashev, I.M. Gyrlya, and A.N. Parshikov Periclase-carbon composite refractories with new complex binder Refract. Ind. Ceram. 48 3 2007 170 175