Geometrical parametric analysis of flow and heat transfer in the shell side of a spiral-wound heat exchanger

Heat Transfer Engineering

Volumn 36, Issue 9, 2015, Pages 790-805

  Zeng, Min ^a   Zhang, Gaopeng ^a   Li, Ye ^a   Niu, Yuzhen ^b   Ma, Yuan ^b   Wang, Qiuwang ^a  

^a XI'AN JIAOTONG UNIVERSITY   (China)

^b Kaifeng Air Separation Group Company Limited   (China)

Author keywords

[No Author keywords available]

Indexed keywords

GEOMETRY; HEAT TRANSFER; MATLAB; NUMERICAL METHODS; TAGUCHI METHODS; TUBES (COMPONENTS);

CONTRIBUTION RATE; CYLINDER DIAMETERS; FLOW AND HEAT TRANSFER; GEOMETRICAL FACTORS; GEOMETRY PARAMETER; MULTIVARIATE CORRELATION; PARAMETRIC -ANALYSIS; THREE-DIMENSIONAL MODEL;

HEAT EXCHANGERS;

EID: 84920076116     PISSN: 01457632     EISSN: 15210537     Source Type: Journal    
DOI: 10.1080/01457632.2015.963386     Document Type: Article

References (33)

1. Xin, R. C., Awwad, A., Dong, Z. F., and Ebadin, M. A., An investigation and Comparative Study of the Pressure Drop in Air-Water Two-Phase Flow in Vertical Helicoidal Pipes, International Journal of Heat and Mass Transfer, vol. 39, no. 4, pp. 735-743, 1996.
2. Adulla, M. A., A Four-Region Moving-Bounding Model of a Once Through Helical Oil Team Generator, Annals of Nuclear Energy, vol. 21, pp. 541-562, 1994.
3. Bai, B., Guo, L., Feng, Z., and Chen, X., Turbulent Heat Transfer in a Horizontally Coiled Tube, Heat Transfer-Asian Research, vol. 28, no. 5, pp. 395-403, 1999.
4. Futagami, K., and Aoyama, Y., Laminar Heat Transfer in Helically Coiled Tubes, International Journal of Heat and Mass Transfer, vol. 31, no. 2, pp. 387-396, 1988.
5. Berger, S. A., Talbot, L., and Yao, L. S., Flow in Curved Pipes, Annual Review of Fluid Mechanics, vol. 15, no. 1, pp. 461-512, 1983.
6. Ali, M. A., Natural Convection Heat Transfer From Vertical Helical Coils in Oil, Heat Transfer Engineering, vol. 27, no. 3, pp. 79-85, 2006.
7. Conté, I., Peng, X. F., and Yang, Z., Numerical Investigation of Heat Transfer Performance of Rectangularly Coiled Pipes, Heat Transfer Engineering, vol. 30, no. 3, pp. 207-220, 2009.
8. Yang, L., The Latest Heat Exchanger Design Calculation and Heat Transfer Strengthening and Quality Inspection Standards Practical Manual, Northern Industrial Press, Beijing, China, 2006 (in Chinese).
9. Bays, J. G., and McAdams,W., Heat Transfer Coefficients in Falling Film Heater Streamline Flow, Industrial and Engineering Chemistry, vol. 29, no. 11, pp. 1240-1246, 1937.
10. Hewitt, G. F., and Barbosa, J., Heat Exchanger Design Handbook, Begell House, New York, NY, 1998.
11. Neeraas, B. O., Fredheim, A. O., and Aunan, B., Experimental Data and Model for Heat Transfer in Liquid Falling Film Flow on Shell-Side for Spiral-Wound LNG Heat Exchanger, International Journal of Heat and Mass Transfer, vol. 47, no. 14-16, pp. 3365-3572, 2004.
12. Neeraas, B. O., Fredheim, A. O., and Aunan, B., Experimental Shell-Side Heat Transfer and Pressure Drop in Gas Flow for Spiral-Wound LNG Heat Exchanger, International Journal of Heat and Mass Transfer, vol. 47, no. 2, pp. 335-361, 2004.
13. Gupta, P. K., Kush, P., and Tiwari, A., Experimental Research on Heat Transfer Coefficients for Cryogenic Cross-Counter-Flow Coiled Finned-Tube Heat Exchangers, International Journal of Refrigeration, vol. 32, no. 5, pp. 960-972, 2009.
14. Gupta, P. K., Kush, P., and Tiwari, A., Experimental Studies on Pressure Drop Characteristics of cryogenic Cross-Counter Flow Coiled Finned Tube Heat Exchangers, Cryogenics, vol. 50, no. 4, pp. 257-265, 2010.
15. Gupta, P. K., Kush, P., and Tiwari, A., Design and Optimization of Coil Finned-Tube Heat Exchangers for Cryogenic Applications, Cryogenics, vol. 47, no. 5-6, pp. 322-332, 2007.
16. Yang, Z., Zhao, Z., Liu, Y., Chang, Y., and Cao, Z., Convective Heat Transfer Characteristics of High-Pressure Gas in Heat Exchanger With Membrane Helical Coils and Membrane Serpentine Tubes, Experimental Thermal and Fluid Science, vol. 35, no. 7, pp. 1427-1434, 2011.
17. Zhao, Z., Wang, X., Che, D., and Cao, Z., Numerical Studies on Flow and Heat Transfer in Membrane Helical-Coil Heat Exchanger and Membrane Serpentine-Tube Heat Exchanger, International Communications in Heat and Mass Transfer, vol. 38, no. 9, pp. 1189-1194, 2011.
18. Ghorbani, N., Taherian, H., and Gorji, M., Experimental Study of Mixed Convection Heat Transfer in Vertical Helically Coiled Tube Heat Exchangers, Experimental Thermal and Fluid Science, vol. 34, no. 7, pp. 900-905, 2010.
19. Ferng, Y., Lin, W., and Chieng, C., Numerically Investigated Effects of Different Dean Number and Pitch Size on Flow and Heat Transfer Characteristics in a Helically Coil-Tube Heat Exchanger, Applied Thermal Engineering, vol. 36, pp. 378-385, 2012.
20. Shokouhmand, H., Salimpour, M., and Akhavan-Behabadi, M., Experimental Investigation of Shell and Coiled Tube Heat Exchangers Using Wilson Plots, International Communications in Heat and Mass Transfer, vol. 35, no. 1, pp. 84-92, 2008.
21. Salimpour, M., Heat Transfer Coefficients of Shell and Coiled Tube Heat Exchangers, Experimental Thermal and Fluid Science, vol. 33, no. 2, pp. 203-207, 2009.
22. Li, Q. H., Yang, R. C., and Shi, D. Q., Study on Design Calculation of the Wound-Tube Heat Exchanger in Hydrogen Recovery System, Chemical Engineering (China), vol. 28, pp. 15-18, 2000 (in Chinese).
23. Yin, J. X., Li, Q. H., Shi, D. Q., Liu, Z., and Yang, R., Heat Transfer Model Land Experiment for Paired-Tubes Wound-Tube Heat Exchangers, Journal of Tsinghua University (Science and Technology), vol. 40, pp. 73-79, 2000 (in Chinese).
24. Taguchi, G., Elsayed, A. E., and Thomas, C. H., Quality Engineering in Production Systems, McGraw-Hill, New York, NY, 1989.
25. Taguchi, G., Taguchi on Robust Technology Development: Bring Quality Engineering (QE) Upstream, ASME Press, New York, NY, 1991.
26. Yang, S. M., and Tao,W. Q., Heat Transfer, 4th ed., Higher Education Press, Beijing, China, 2006 (in Chinese).
27. Tao,W.Q., Numerical heat transfer, 2nd ed.,Xi'an Jiaotong University Press, Xi'an, China, 2001 (in Chinese).
28. Hsieh, C. T., and Jang, J. Y., Parametric Study and Optimization of Louver Finned-Tube Heat Exchangers by Taguchi Method, Applied Thermal Engineering, vol. 42, pp. 101-110, 2012.
29. Zeng, M., Tang, L. H., Lin, M., and Wang, Q. W., Optimization of Heat Exchangers With Vortex-Generator Fin by Taguchi Method, Applied Thermal Engineering, vol. 30, no. 13, pp. 1775-1783, 2010.
30. Wang, Q.W.,Chen, Q.Y., Zhang, J., and Zeng, M.,Optimal Design of Bi-Layer Interconnector for SOFC Based on CFD-Taguchi Method, International Journal of Hydrogen Energy, vol. 35, no. 9, pp. 4292-4300, 2010.
31. Wang, Q.W., Chen, Q. Y., and Zeng, M., A CFD-Taguchi Combined Method for Numerical Investigation of Natural Convection Cooling Performance of Air-Core Reactor With Noise Reducing Cover, Numerical Heat Transfer Part A-Applications, vol. 55, no. 12, pp. 1116-1130, 2009.
32. Maguire, L., Nakayama, W., Behnia, M., and Kondo, Y., A CFD Study on the Effect of Shrinking Box Size on Cooling Airflows in Compact Electronic Equipment-The Case of Portable Projection Display Equipment, Heat Transfer Engineering, vol. 29, no. 2, pp. 188-197, 2008.
33. Tsai, J. T., Liu, T. K., and Chou, J. H., Hybird Taguchi-Genetic Algorithm for Global Numerical Optimization, IEEE Transactions on Evolutionary Computation, vol. 8, no. 4, pp. 365-377, 2004.