A hybrid methodology for the determination of the effective heat capacity of PCM enhanced building components

Renewable Energy

Volumn 76, Issue , 2015, Pages 790-804

  Mandilaras, I D ^a   Kontogeorgos, D A ^a   Founti, M A ^a  

^a NATIONAL TECHNICAL UNIVERSITY OF ATHENS   (Greece)

Author keywords

Differential scanning calorimetry; Effective heat capacity method; Heat flow meter apparatus; Numerical modeling; PCM; Phase change materials

Indexed keywords

BUILDING COMPONENTS; CALORIMETERS; CURVE FITTING; DIFFERENTIAL SCANNING CALORIMETRY; FLOW MEASUREMENT; FLOWMETERS; HEAT STORAGE; HEAT TRANSFER; HYBRID MATERIALS; NUMERICAL METHODS; PHASE CHANGE MATERIALS; PULSE CODE MODULATION; SPECIFIC HEAT; THERMAL INSULATION;

DYNAMIC MODES; EFFECTIVE HEAT CAPACITY METHOD; EXPERIMENTAL ANALYSIS; HEAT FLOW METERS; HYBRID METHODOLOGIES; THERMAL PERFORMANCE; THERMAL STORAGE;

NUMERICAL MODELS;

CALORIMETRY; HEAT FLOW; HYBRID; NUMERICAL MODEL; OPTIMIZATION; PERFORMANCE ASSESSMENT; PHASE TRANSITION; THERMAL POWER;

CALLUNA VULGARIS;

EID: 84919941186     PISSN: 09601481     EISSN: 18790682     Source Type: Journal    
DOI: 10.1016/j.renene.2014.11.078     Document Type: Article

References (43)

1. Castellón C., Medrano M., Roca J., Cabeza L.F., Navarro M.E., Fernández A.I., et al. Effect of microencapsulated phase change material in sandwich panels. Renew Energy October 2010, 35(10):2370-2374.
2. Mandilaras I., Stamatiadou M., Katsourinis D., Zannis G., Founti M. Experimental thermal characterization of a Mediterranean residential building with PCM gypsum board walls. Build Environ March 2013, 61:93-103.
3. Dutil Y., Rousse D.R., Salah N.B., Lassue S., Zalewski L. Areview on phase-change materials: mathematical modeling and simulations. Renew Sustain Energy Rev 2011, 15:112-130.
4. Yang H., He Y. Solving heat transfer problems with phase change via smoothed effective heat capacity and element-free Galerkin methods. Int Commun Heat Mass Transf April 2010, 37(4):385-392.
5. Dutil Y., Rousse D., Lassue S., Zalewski L., Joulin A., Virgone J., et al. Modeling phase change materials behavior in building applications: comments on material characterization and model validation. Renew Energy January 2014, 61:132-135.
6. Foong C.W., Nydal O.J., Løvseth J. Investigation of a small scale double-reflector solar concentrating system with high temperature heat storage. Appl Therm Eng July 2011, 31(10):1807-1815.
7. Egolf P.W., Manz H. Theory and modeling of phase change materials with and without mushy regions. Int J Heat Mass Transf December 1994, 37(18):2917-2924.
8. Chiu J.N.W., Martin V. Submerged finned heat exchanger latent heat storage design and its experimental verification. Appl Energy May 2012, 93:507-516.
9. Diarce G., Campos-Celador Á., Martin K., Urresti A., García-Romero A., Sala J.M. Acomparative study of the CFD modeling of a ventilated active façade including phase change materials. Appl Energy August 2014, 126:307-317.
10. Ali Memon S. Phase change materials integrated in building walls: a state of the art review. Renew Sustain Energy Rev March 2014, 31:870-906.
11. Günther E., Hiebler S., Mehling H., Redlich R. Enthalpy of phase change materials as a function of temperature: required accuracy and suitable measurement methods. Int J Thermophys 2009, 30:1257-1269.
12. Lazaro A., Peñalosa C., Solé A., Diarce G., Haussmann T., Fois M., et al. Intercomparative tests on phase change materials characterisation with differential scanning calorimeter. Appl Energy September 2013, 109:415-420.
13. Hunger M., Entrop A.G., Mandilaras I., Brouwers H.J.H., Founti M. The behavior of self-compacting concrete containing micro-encapsulated phase change materials. Cem Concr Compos November 2009, 31(10):731-743.
14. Yinping Z., Yi J. Asimple method, the-history method, of determining the heat of fusion, specific heat and thermal conductivity of phase-change materials. Meas Sci Technol 1999, 10:201-205.
15. Kravvaritis E.D., Antonopoulos K.A., Tzivanidis C. Improvements to the measurement of the thermal properties of phase change materials. Meas Sci Technol 2010, 21. [art. no. 045103].
16. Kosny J., Kossecka E., Brzezinski A., Tleoubaev A., Yarbrough D. Dynamic thermal performance analysis of fiber insulations containing bio-based phase change materials (PCMs). Energy Build September 2012, 52:122-131.
17. Pomianowski M., Heiselberg P., Lund Jensen R., Cheng R., Zhang Y. Anew experimental method to determine specific heat capacity of inhomogeneous concrete material with incorporated microencapsulated-PCM. Cem Concr Res January 2014, 55:22-34.
18. Urresti A., Sala J.M., García-Romero A., Diarce G., Escudero C. Validation of heat transfer models for PCMs with a conductivimeter. Energy Procedia 2012, 30:395-403.
19. Kontogeorgos D., Founti M. Numerical investigation of simultaneous heat and mass transfer mechanisms occurring in a gypsum board exposed to fire conditions. Appl Therm Eng August 2010, 30(11-12):1461-1469.
20. Barreneche C., Solé A., Miró L., Martorell I., Inés Fernández A., Cabeza L.F. Study on differential scanning calorimetry analysis with two operation modes and organic and inorganic phase change material (PCM). Thermochim Acta 10 February 2013, 553:23-26.
21. Höhne G.W.H., Hemminger W.F., Flammersheim H.J. Applications of differential scanning calorimetry. Differential scanning calorimetry 2003, 147-244. Springer.
22. ISO 8301:1991 Thermal insulation - determination of steady-state thermal resistance and related properties - heat flow meter apparatus 1991.
23. ASTM C518 - 10 Standard test method for steady-state thermal transmission properties by means of the heat flow meter apparatus 2010.
24. ASTM C1784 - 13 Standard test method for using a heat flow meter apparatus for measuring thermal storage properties of phase change materials and products 2013.
25. Kontogeorgos D., Ghazi Wakili K., Hugi E., Founti M. Heat and moisture transfer through a steel stud gypsum board assembly exposed to fire. Constr Build Mater January 2012, 26(1):746-754.
26. Mandilaras I., Kontogeorgos D., Founti M. Implementation of the heat capacity method for modelling the thermal performance of Agglomerate Stones containing PCM. 9th IIR conference on phase-change materials and slurries for refrigeration and air conditioning October 2010, [Bulgaria, Sofia].
27. Minkowycz W., Sparrow E.M. Advances in numerical heat transfer (vol. 1), chapter 9. An overview of numerical methods for solving phase change problems 1997, 347-348. V.R. Voller (Ed.).
28. Rangaiah G.P., Bonilla-Petriciolet A. Multi-objective optimization in chemical engineering: developments and applications, chapter 13. Modeling and multi-objective optimization of a chromatographic system 2013, Wiley. A. Tarafder (Ed.).
29. Gear C.W. Automatic integration of ordinary differential equations. Commun ACM 1971, 14:176-179.
30. Boersma S.L. Atheory of differential thermal analysis and new methods of measurement and interpretation. JAm Ceram Soc 1955, 38(8):281-284.
31. Castellón C., Günther E., Mehling H., Hiebler S., Cabeza L.F. Determination of the enthalpy of PCM as a function of temperature using a heat-flux DSC-a study of different measurement procedures and their accuracy. Int J Energy Res 2008, 32:1258-1265.
32. ISO 11357-4:2005 Plastics - differential scanning calorimetry (DSC) - part 4: determination of specific heat capacity 2005.
33. ASTM E1269 - 11 Standard test method for determining specific heat capacity by differential scanning calorimetry 2011.
34. ASTM E793-06 Standard test method for enthalpies of fusion and crystallization by differential scanning calorimetry 2006.
35. ISO 11357-3:2011 Plastics - differential scanning calorimetry (DSC) - part 3: determination of temperature and enthalpy of melting and crystallization 2011.
36. Arkar C., Medved S. Influence of accuracy of thermal property data of a phase change material on the result of a numerical model of a packed bed latent heat storage with spheres. Thermochim Acta November 2005, 438(1-2):192-201.
37. He B., Martin V., Setterwall F. Phase transition temperature ranges and storage density of paraffin wax phase change materials. Energy September 2004, 29(11):1785-1804.
38. Alkan C., Sari A., Karaipekli A., Uzun O. Preparation, characterization, and thermal properties of microencapsulated phase change material for thermal energy storage. Sol Energy Mater Sol Cells 2009, 93:143-147.
39. Solomon G.R., Velraj R. Analysis of the heat transfer mechanisms during energy storage in a phase change material filled vertical finned cylindrical unit for free cooling application. Energy Convers Manag November 2013, 75:466-473.
40. Solomon G.R., Karthikeyan S., Velraj R. Sub cooling of PCM due to various effects during solidification in a vertical concentric tube thermal storage unit. Appl Therm Eng 15 April 2013, 52(2):505-511.
41. Emmel M.G., Abadie M.O., Mendes N. New external convective heat transfer coefficient correlations for isolated low-rise buildings. Energy Build 2007, 39(3):335-342.
42. Kontogeorgos D., Mandilaras I., Founti M. Scrutinizing gypsum board thermal performance at dehydration temperatures. JFire Sci 2011, 29:111-130.
43. Kontogeorgos D.A., Mandilaras I.D., Founti M.A. Fire behavior of regular and latent heat storage gypsum boards. Fire Mater 2015, 10.1002/fam.2246.