Ceramic Filters and Membranes

Ceramics Science and Technology

Volumn 4-4, Issue , 2013, Pages 117-167

  Voigt, Ingolf ^a   Adler, Jörg ^a   Weyd, Marcus ^a   Kriegel, Ralf ^a  

^a FRAUNHOFER INSTITUTE FOR CERAMIC TECHNOLOGIES AND SYSTEMS   (Germany)

Author keywords

Ceramic filter; Ceramic membranes; Diesel particulate filter; Gas separation; Hot gas filtration; Liquid filtration; Pervaporation (PV); Vapor permeation (VP)

Indexed keywords

AIR FILTERS; CERAMIC MATERIALS; CERAMIC MEMBRANES; COAL COMBUSTION; EVAPORATION; FUEL FILTERS; HIGH TEMPERATURE CORROSION; MICROFILTRATION; PERMEATION; PERVAPORATION; SILICATES; SILICON CARBIDE;

CERAMIC FILTERS; DIESEL PARTICULATE FILTERS; GAS SEPARATIONS; HOT GAS FILTRATION; VAPOR PERMEATION;

GAS PERMEABLE MEMBRANES;

EID: 84918842962     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9783527631940.ch53     Document Type: Chapter

References (154)

1. Smid, J., Hsiau, S.S., Peng, C.Y., and Lee, H.T. (2006) Filtr. Separat., 43, 21-24.
2. Foerster, M.E.C., Oeking, K., and Hannes, K. (2002) 5th International Symposium on Gas Cleaning at High Temperatures, September 17-20, Morgantown, WV, US. Available at: www.netl.doe.gov/publications.
3. Woods, M.C. et al. (2007) Cost and Performance Baseline for Fossil Energy Plants, DOE/NETL-2007/1281. Department of Energy, National Energy Technology Laboratory, USA.
4. Westerheide, R., Adler, J., Walch, A., Völker, W., Buhl, H., and Fister, D. (1999) Development of ceramic filter materials for particle removal above 800 °C. Gas cleaning at high temperatures. 4th International Symposium and Exhibition, Karlsruhe, 1999, S384-S392.
5. Adler, J., Rehak, P., Angermann, J., Meyer, B., and Westerheide, R. (2002) Ceram. Eng. Sci. Proc., 23, 269-276.
6. Adler, J., Rehak, P., Westerheide, R., and von der Wehd, C. (2002) Evaluation of mechanical properties and structural changes of ceramic filter materials for hot gas cleaning under simulated process conditions. 5th International Symposium on Gas Cleaning at High Temperatures, September 17-20, Morgantown, WV, US. Available at: http://www.netl.doe.gov/publications.
7. Lee, K.S., Woo, S.K., Han, I.S., Seo, D.W., Park, S.J., and Park, Y.O. (2002) J. Ceram. Soc. Jpn, 110, 656-661.
8. Mai, R., Kreft, D., Leibold, H., and Seifert, H. (2000) Coupled pressure pulse (CPP) recleaning of ceramic filter candles-components and system performance. 5th European Conference on Industrial Furnaces and Boilers (INFUB 2000), April 11-14, Porto, Portugal.
9. Heidenreich, S., Haag, W., Walch, A., Scheibner, B., Mai, R., Leibold, H., and Seifert, H. (2002) Ceramic hot gas filter with integrated failsafe system. 5th International Symposium on Gas Cleaning at High Temperatures, September 17-20, Morgantown, WV, US. Available at: http://www.netl.doe.gov/publications.
10. Heidenreich, S., Haag, W., and Salinger, M. (2011) Fuel, doi.org/10.1016/j.fuel.2011.03.007.
11. Bishop, B., Dunham, R., Goldsmith, R., and Henderson, A. (2002) Novel backup filter device for candle filters. 5th International Symposium on Gas Cleaning at High Temperatures, September 17-20, Morgantown, WV, US. Available at: http://www.netl.doe.gov/publications.
12. Heidenreich, S. and Wolters, C. (2004) Hot gas filter contributes to IGCC power plant's reliable operation. Filtr. Separat., 41, 22-24.
13. Hickey, M.J. (2003) Slipstream Testing of Particulate Filters at the Wabash River Coal Gasification Repowering Project, Final Report June, D.O.E. Award No. DE-FC26-97FT34158.
14. Pena, F.G. (2005) Operating Experience and current status of Puertollano IGCC power plant. International Freiberg Conference on IGCC & XtL Technologies, June 17, 2005.
15. Hoffmann, G., Schirmer, M., Bilitewski, B., and Kaszás, M. (2007) J. Hazard. Mater., 145, 351-357.
16. Heidenreich, S., Nacken, M., Hackel, M., and Schaubb, G. (2008) Powder Technol., 180, 86-90.
17. ACEA (European Automobile Manufacturers Association) (2008) European Union Economic Report, Brussels, February.
18. J.D. Powers and Associates (2007) Global Markets for Diesel Powered Light Vehicles to 2017, J.D. Power Automotive Forecasting, December.
19. Samaras, Z., Ntziachristos, L., Thompson, N., Hallb, D., Westerholm, R., and Boulterd, P. (2005) Characterisation of Exhaust Particulate Emissions from Road Vehicles, Final Publishable Report under EC-Contract 2000-RD. 11091, April.
20. Koltsakis, G.C., Haralampous, O.A., Dardiotis, C.K., Samaras, Z.C., Vogt, C.-D., Ohara, E., Watanabe, Y., and Mizutani, T. (2005) SAE 2005-01-0952.
21. Stewart, M., Rector, D., Muntean, G., and Maupin, G. (2004) Ceram. Eng. Sci. Proc., 25, 437-446.
22. Konstandopoulos, A., Kostoglou, M., Vlachos, N., and Zarvalis, D. (2004) Modelling of diesel particulate filters, in Minimierung der Partikelemissionen von Verbrennungsmotoren (ed. E. Steinmetz), ISBN: 3-8169-2430-1. Expert-Verlag, Essen, pp. 94-107.
23. Cutler, W.A. (2004) Ceram. Eng. Sci. Proc., 25 421-430.
24. Adler, J. (2005) Int. J. Appl. Ceram. Technol., 2, 429-439.
25. Kelm, E.F. (1977) US 4041592, published 16 August.
26. Ogyu, K., Ohno, K., Hong, S., and Komori, T. (2004) SAE 2004-01-0949.
27. Bardon, S., Bouteiller, B., Bonnail, N., Girot, P., Gleize, V., Oxarango, L., Higelin, P., Michelin, J., Schuerholz, S., and Terres, F. (2004) SAE 2004-01-0950.
28. Aravelli, K. and Heibel, A. (2007) SAE 2007-01-0920.
29. Masoudi, M. (2005) SAE 2005-01-0971.
30. Sato, H. (2004) Ceram. Eng. Sci. Proc., 25, 431-436.
31. Howitt, J.S. and Montierith, M.R. (1981) SAE 810114.
32. Locker, R.J., Sawyer, C.B., Floerchinger, P., and Craig, A.G. (2004) SAE 2004-01-0958.
33. Bachiorrini, A. (1996) Ceram. Int., 22, 73-77.
34. Ogunwumi, S.B., Tepesch, P.D., Chapman, T., Warren, C.J., Melscoet-Chauvel, I.M., and Tennent, D.L. (2005) SAE 2005-01-0583.
35. Boger, T., Warkins, J., Warren, Ch., and Heibel, A. (2005) Motortechnische Zeitschrift, September, 660-669.
36. Rose, D., Pittner, O.A., Jaskula, C., Boger, Th., Glasson, Th., and da Costa, V.M. (2007) SAE 2007-01-1269.
37. Ingram-Ogunwumi, R.S., Dong, Q., Murrin, T.A., Bhargava, R.Y., Warkins, J.L., and Heibel, A.K. (2007) SAE 2007-01-0656.
38. Franz, A., Klupski, S., and Hofmeister, M. (2010) ATZ Autotechnol., 10, 52-55.
39. Tsukada, K., US 4777152, Filed 29 February 1988 (Japanese priority date 29.04.1985).
40. Itoh, A., Shimato, K., Komori, T., Okazoe, H., Yamada, T., Niimura, K., and Watanabe, Y. (1993) SAE 930360.
41. Ohno, K., Yamayose, K., Sato, H., and Ogyu, K. (2004) SAE 2004-01-0954.
42. Oya, T., Yamayose, K., Ogyu, K., Hayashi, M., and Ohno, K. (2005) SAE 2005-01-0579.
43. Ohno, K., Shimato, K., and Tsuji, M., US 6.669.751, filed 26 September, 2000.
44. Briot, A. (2007) SAE 2007-01-0657.
45. Stobbe, P., Petersen, H.G., Hoj, J.W., and Sorenson, S.C. (1993) SAE 932495.
46. Schmidtgen, T. and Adler, J. (2007) Flexibles DPF-Design gepaart mit innovativer SiC-Keramik, Proceedings, 5th FAD-Konferenz "Herausforderung - Abgasnachbehandlung für Dieselmotoren", 7 November 2007, Dresden, pp. 139-149.
47. Takahiro, T., Yuichiro, T., Shuichi, I., and Takashi, H., WO02081406 (Japanese priority date 30.03.2001).
48. Miwa, S., Abe, F., Hamanaka, T., Yamada, T., and Miyairi, Y. (2001) SAE 2001-01-0192.
49. Ichikawa, S., Uchida, Y., Kaneda, A., and Hamanaka, T. (2004) SAE 2004-01-0951.
50. Harada, M., Ichikawa, S., Otsuka, A., Hattori, M., and Hashimoto, S. (2005) SAE 2005-01-0582.
51. Schäfer-Sindlinger, A., Vogt, C.D., Okumura, J., Toyoshima, T., and Hashimoto, S. (2004) SAE 2004-01-0952.
52. Adler, J., Teichgraeber, M., Klose, T., and Stoever, H. (1996) DE 197.27.115, filed 01 July.
53. Joulin, J.P., Pourchet, F., Courty, P., and Dementhon, J.-B. (2000) US 6.582.796, filed 21 July.
54. Wallin, S.A., Prunier, A.R., and Moyer, J.R. (1999) US 6.306.335, filed 27 August.
55. Li, C.G., Mao, F., Swartzmiller, S.B., Wallin, S.A., and Ziebarth, R.R. (2004) SAE 2004-01-0955.
56. Li, Ch., Mao, F., Zhan, R., and Eakle, S. (2007) SAE 2007-01-0918.
57. DOW (2007) Press Release, December 19.
58. Mayer, A. and Buck, A. (1992) SAE 920146.
59. Miller, R.K., Haberkamp, W.C., Badeau, K.M., Liu, Z.G., Shirk, R.C., and Wood, T. (2002) SAE 2002-01-0323.
60. Ido, T., Kunieda, M., Ogyu, K., and Ohno, K. (2007) SAE 2007-01-06587.
61. Zuberi, B. et al. (2007) Advanced High Porosity Ceramic Honeycomb Wall Flow Filter. Diesel Engine-Efficiency and Emissions Research (DEER) Conference, Detroit, August 13-16.
62. Shoji, A. (2007) An Improvement of Diesel PM and NOx Reduction System. Diesel Engine-Efficiency and Emissions Research (DEER) Conference, Detroit, August 13-16.
63. Voigt, I. (2006) Keramische Membranen, in Membranen (eds K. Ohlrogge and K. Ebert), Wiley-VCH-Verlag GmbH & Co. KgaA, Weinheim, ISBN: 3-527-30979-9, pp. 103-129.
64. Pafylias, I., Cheryan, M., Mehaiab, M.A., and Saglam, N. (1996) Food Res. Intern., 29, 141-146.
65. Holm, S., Malmberg, R., and Svensson, K. (1989) Arrangement in membrane filters. EP0333753 B1, 24 November.
66. Skrzypeka, M. and Burger, M. (2009) Desalination, 250, 1095-1100.
67. Zulewska, J., Newbold, M., and Barbano, D.M. (2009) J. Dairy Sci., 92, 1361-1377.
68. Voigt, I., Richter, H., Kühnert, J.-Th., Weyd, M., Tusel, E., and Brüschke, H. E.A. (2011) Sustainable, energy efficient and economic biorefineries by membrane enhanced processes. ICOM-International Congress on Membranes and Membrane Processes, 23-29 July, Amsterdam, The Netherlands.
69. Voigt, I. (2005) Chem. Ing. Tech., 77, 559-564.
70. Levecke, B. (2006) Successful industrial application of diafiltration with ceramic NF. International Workshop on Membranes in Solvent Filtration, Leuven, Belgium, March 23-24.
71. Kober, P.A. (1917) J. Am. Chem. Soc., 39, 944-948.
72. Atra, R., Vatai, G., and Bekassymolnar, E. (1999) Chem. Eng. Process., 38, 149-155.
73. Weyd, M., Richter, H., Puhlfürß, P., Voigt, I., Hamel, C., and Seidel-Morgenstern, A. (2008) J. Membr. Sci., 307, 239-248.
74. Lipnizki, F., Field, R.W., and Ten, P.-K. (1999) J. Membr. Sci., 153, 183-210.
75. Jonquiéres, A., Clément, R., Lochon, P., Néel, J., Dresch, M., and Chrétien, B. (2002) J. Membr. Sci., 206, 87-117.
76. van Veen, H.M., van Delft, Y.C., Engelen, C.W., and Pex, P.P.A.C. (2001) Sep. Purif. Technol., 22-23, 361-366.
77. van Hoof, V., Dotremont, C., and Buekenhoudt, A. (2006) Sep. Purif. Technol., 48, 304-309.
78. Brüschke, H.E.A. (2001) State-of-Art of Pervaporation Processes in the Chemical Industry, in Membrane Technology in the Chemical Industry (eds S.P. Nunes and K.-V. Peinemann), Wiley-VCH, Weinheim, pp. 127-172.
79. Chapman, P.D., Oliveira, T., Livingston, A.G., and Li, K. (2008) J. Membr. Sci., 318, 5-37.
80. van Baelen, D., Reyniers, A., van der Bruggen, B., Vandecasteele, C., and Degreve, J. (2004) Sep. Sci. Technol., 39, 563-580.
81. Zhang, S. and Drioli, E. (1995) Sep. Sci. Technol., 30, 1-31.
82. Verkerk, A. (2001) J. Membr. Sci., 193, 227-238.
83. Kondo, M., Komori, M., Kita, H., and Okamoto, K. (1997) J. Membr. Sci., 133, 133-141.
84. Kölsch, P., Sziladi, M., Noack, M., Caro, J., Kotsis, L., Kotsis, I., and Sieber, I. (2000) Chem. Ing. Tech., 72, 1167-1173.
85. Richter, H., Voigt, I., and Kühnert, J.-T. (2006) Desalination, 199, 92-93.
86. Kita, H., Fuchida, K., Horita, T., Asamura, H., and Okamoto, K. (2001) Sep. Purif. Technol., 25, 261-268.
87. Casado, L., Mallada, R., Téllez, C., Coronas, J., Menéndez, M., and Santamaría, J. (2003) J. Membr. Sci., 216, 135-147.
88. Cui, Y., Kita, H., and Okamoto, K. (2004) J. Membr. Sci., 236, 17-27.
89. Noack, M., Kölsch, P., Caro, J., Schneider, M., Toussaint, P., and Sieber, I. (2000) Microporous Mesoporous Mater., 35-36, 253-265.
90. van Veen, H.M., Rietkerk, M.D., Shanahan, D.P., van Tuel, M.M., Kreiter, R., Castricum, H.L., ten Elshof, J.E., and Vente, J.F. (2011) J. Membr. Sci., 380, 124-131.
91. Asaeda, M. (2002) J. Membr. Sci., 209, 163-175.
92. Asaeda, M. and Yamasaki, S. (2001) Sep. Purif. Technol., 25, 151-159.
93. Ayral, A., Julbe, A., Roualdes, S., Rouessac, V., Durand, J., and Sala, B.S. (2006) Period. Polytech. Ser. Chem. Eng., 50, 67-79.
94. Boffa, V., Blank, D., and ten Elshof, J.E. (2008) J. Membr. Sci., 319, 256-263.
95. Gu, Y. and Oyama, S.T. (2009) J. Membr. Sci., 345, 267-275.
96. Kanezashi, M. and Asaeda, M. (2006) J. Membr. Sci., 271, 86-93.
97. Gu, Y., Hacarlioglu, P., and Oyama, S.T. (2008) J. Membr. Sci., 310, 28-37.
98. Castricum, H.L., Kreiter, R., van Veen, H.M., Blank, D.H., Vente, J.F., and ten Elshof, J.E. (2008) J. Membr. Sci., 324, 111-118.
99. Duke, M. (2004) J. Membr. Sci., 241, 325-333.
100. Uhlmann, D., Smart, S., and da Costa, J.C.D. (2011) J. Membr. Sci., 380, 48-54.
101. Kondo, M. and Kita, H. (2010) J. Membr. Sci., 361, 223-231.
102. Richter, H., Voigt, I., Fischer, G., and Puhlfürß, P. (2003) Sep. Purif. Technol., 32, 133-138.
103. Weyd, M., Richter, H., Kühnert, J.-T., Voigt, I., Tusel, E., and Brüschke, H.E.A. (2010) Chem. Ing. Tech., 82, 1257-1260.
104. Caro, J. and Noack, M. (2008) Microporous Mesoporous Mater., 115, 215-233.
105. Morigami, Y., Kondo, M., Abe, J., Kita, H., and Okamoto, K. (2001) Sep. Purif. Technol., 25, 251-260.
106. Kondo, M. (2003) Sep. Purif. Technol., 32, 191-198.
107. Caro, J., Noack, M., and Kölsch, P. (2005) Adsorption, 11, 215-227.
108. Jonquieres, A. and Fane, A. (1997) J. Membr. Sci., 125, 245-255.
109. Li, L., Xiao, Z., Tan, S., Pu, L., and Zhang, Z. (2004) J. Membr. Sci., 243, 177-187.
110. O'Brien, D.J., Roth, L.H., and McAloon, A.J. (2000) J. Membr. Sci., 166, 105-111.
111. González-Velasco, J.R., González-Marcos, J.A., and López-Dehesa, C. (2002) Desalination, 149, 61-65.
112. Volkov, V.V., Fadeev, A.G., Khotimsky, V.S., Litinova, E.G., Selinskaya, Y.A., McMillan, J.D., and Kelley, S.S. (2004) J. Appl. Polym. Sci., 91, 2271-2277.
113. Mori, Y. and Inaba, T. (1990) Biotechnol. Bioeng., 36, 849-853.
114. Vane, L.M., Namboodiri, V.V., and Bowen, T.C. (2008) J. Membr. Sci., 308, 230-241.
115. Bowen, T.C., Meier, R.G., and Vane, L.M. (2007) J. Membr. Sci., 298, 117-125.
116. Gevers, L.E.M., Vankelecom, I.F.J., and Jacobs, P.A. (2005) Chem. Commun., 2500-2502.
117. Bowen, T.C., Noble, R.D., and Falconer, J.L. (2004) J. Membr. Sci., 245, 1-33.
118. Bowen, T.C., Kalipcilar, H., Falconer, J.L., and Noble, R.D. (2003) J. Membr. Sci., 215, 235-247.
119. Negishi, H., Imura, T., Kitamoto, D., Ikegami, T., Yanagishita, H., Okamoto, M., Idemoto, Y., Koura, N., and Sano, T. (2006) J. Am. Ceram. Soc., 89, 124-130.
120. Ikegami, T., Yanagishita, H., Kitamoto, D., Haraya, K., Nakane, T., Matsuda, H., Koura, N., and Sano, T. (1997) Biotechnol. Tech., 11, 921-924.
121. Weyd, M., Richter, H., Voigt, I., Hamel, C., and Seidel-Morgenstern, A. (2006) Desalination, 199, 308-309.
122. Wee, S.-L., Tye, C.-T., and Bhatia', S. (2008) Sep. Purif. Technol., 63, 500-516.
123. Moo Lee, Y. (1999) J. Membr. Sci., 159, 41-46.
124. Qiao, X., Chung, T.-S., Guo, W.F., Matsuura, T., and Teoh, M.M. (2005) J. Membr. Sci., 252, 37-49.
125. van Hoof, V., van den Abeele, L., Buekenhoudt, A., Dotremont, C., and Leysen, R. (2004) Sep. Purif. Technol., 37, 33-46.
126. Verkerk, A. (2001) Sep. Purif. Technol., 22-23, 689-695.
127. Frost & Sullivan (2007) M146-01. European Bioethanol and Feedstock Markets Analysis.
128. Commission of the European Communities (2007) Communication from the Commission to the European Council and the European Parliament. An energy policy for Europe.
129. Atkinson, A. and Ramos, T.M.G.M. (2000) Solid State Ionics, 129, 259-269.
130. Schulz, M., Kriegel, R., and Kaps, C. (2006) Simulation of the complex loads of ceramic membranes used for oxygen separation. A global roadmap for ceramics. 1st International Conference on Ceramics, Toronto, Canada. CD-ROM-Beitrag ICC-P2-39-144-2006, 00P-023.pdf.
131. Wagner, C. (1933) Z. Phys. Chem., B21, 25-41.
132. Wagner, C. (1938) Angew. Chem., 49, 735-746.
133. 2 emissions from fuel combustion. Highlights. Available at: www.iea.org/co2highlights/co2highlights.pdf.
134. Hoffmann, G.W., Jeschar, R., and Pötke, W. (1985) Stahl. Eisen., 105, 158-164.
135. Engels, S., Beggel, F., Modigell, M., and Stadler, S. (2010) J. Membr. Sci., 359, 93-101.
136. Lu, H., Tong, J., Cong, Y., and Yang, W. (2005) Catal. Today, 104, 154-159.
137. Wang, H., Cong, Y., and Yang, W. (2005) Catal. Today, 104, 160-167.
138. Kriegel, R., Voigt, I., and Burckhardt, W. (2007) Oxygen separation with mixed conducting ceramic membranes - application potential and state of the art, in Proceedings 10th ECerS Conference (eds J.G. Heinrich and C. Aneziris), Göller Verlag, Baden-Baden, Berlin, pp. 2161-2168 ISBN: 3-87264-22-4.
139. 3-δ membranes. 10th International Conference on Inorganic Membranes, August 18-22, Tokyo, Japan.
140. Nazarko, J., Weber, M., Riensche, E., and Stolten, D. (2011) Oxygen supply for oxyfuel power plants by Oxy-Vac-Jül process. 2nd International Conference on Energy Process Engineering, Efficient Carbon Capture for Coal Power Plants, June 20-22, Frankfurt/Main.
141. Kriegel, R. (2010) Einsatz keramischer BSCF-Membranen in einem transportablen Sauerstoff-Erzeuger, in DKG Handbuch Technische Keramische Werkstoffe, HvB-Verlag Ellerau, 119. Delivery complement (ed. J. Kriegesmann), HvB-Verlag, Ellerau, Chapter 8.10.1.1, 1-46.
142. http://www.mem-brain-allianz.de.
143. Shao, Z.P., Yang, W.S., Cong, Y., Dong, H., Tong, J.H., and Xiong, G.X. (2000) J. Membr. Sci., 172, 177-188.
144. Vente, J.F., Haije, W.G., and Rak, Z.S. (2006) J. Membr. Sci., 276, 178-184.
145. Vente, J.F., McIntosh, S., Haije, W.G., and Bouwmeester, H.J.M. (2006) J. Solid State Electrochem., 10, 581-588.
146. Arnold, M., Wang, H., and Feldhoff, A. (2007) J. Membr. Sci., 1-2, 44-52.
147. Schulz, M., Kriegel, R., and Kämpfer, A. (2011) J. Membr. Sci., 378, 10-17.
148. 3-δ. Solid State Ionics, 178, 1787-1791.
149. Arnold, M., Gesing, T.M., Martynczuk, J., and Feldhoff, A. (2008) Chem. Mater., 20, 5851-5858.
150. Erskine, K.M., Meier, A.M., and Pilgrim, S.M. (2002) J. Mater. Sci., 37, 1705-1709.
151. Kriegel, R., Kircheisen, R., and Ritter, K. (2009) Verfahren zur hochtemperaturfesten Verbindung von sauerstoff-permeablen Oxidkeramiken auf der Basis substituierter Erdalkalicobaltate durch dotierungsunterstütztes diffusives Reaktionssintern. DE102009050019B3, 16 October.
152. Kriegel, R., Schulz, M., Ritter, K., Kiesel, L., Pippardt, U., Stahn, M., and Voigt, I. (2011) Advanced membrane design for oxygen separation, in: Efficient Carbon Capture for Coal Power Plants, Book of Extended Abstracts, Dechema, Frankfurt am Main, Germany, pp. 114-117.
153. Dyer, P.N., Minford, E., Russek, L.E., Carolan, M.F., Taylor, D.M., Bright, J.D., Cutler, R.A., Prouse, D.W., Richards, R.E., and Wilson, M.A. (1995) EP0732138B1, Planar solid-state membrane module, 13 March.
154. Anderson, L.L., Armstrong, P.A., Repasky, J.M., and Stein, V.E. (2011) Major CCS Demonstration Projects, Enabling Clean Coal Power Generation. ITM Oxygen Technology, September 12-15, Pittsburgh, PA, USA.