Wear characteristics of Stellite6 and NOREM02 hardfaced SKD61 hot working tool steel at the elevated temperature

International Journal of Precision Engineering and Manufacturing

Volumn 15, Issue 12, 2014, Pages 2549-2558

  Park, Na Ra ^a   Ahn, Dong Gyu ^a  

^a Chosun University   (South Korea)

Author keywords

Elevated Temperature; Hardfacing materials; Laser aided direct metal rapid tooling; Morphology; SKD61 hotworking tool steel; Wear characteristics

Indexed keywords

DIGITAL DEVICES; HARDNESS; HOT STAMPING; MORPHOLOGY; STRAIN HARDENING; SUPERALLOYS; TOOL STEEL; TOOLS; WEAR OF MATERIALS;

ELEVATED TEMPERATURE; HARD FACING MATERIALS; HOT-WORKING TOOL STEELS; RAPID TOOLING; WEAR CHARACTERISTICS;

HOT WORKING;

EID: 84916940565     PISSN: 22347593     EISSN: 20054602     Source Type: Journal    
DOI: 10.1007/s12541-014-0626-0     Document Type: Article

References (27)

1. Yang, D. Y., Ahn, D. G., Lee, C. H., Park, C. H., and Kim, T. J., “Integration of CAD/CAM/CAE/RP for the Development of Metal Forming Process,” Journal of Materials Processing Technology, Vol. 125–126, pp. 26–34, 2002.
2. Vollersten, F. and Schmidt, F., “Dry Metal Forming: Definition, Chances and Challenges,” Int. J. Precis. Eng. Manuf.-Green Tech., Vol. 1, No. 1, pp. 59–62, 2014.
3. Tzou, G. Y., Hwang, Y. M., and Teng, H. Y., “Study on Rotating Compression Forming of Double-layer Clad Ring Considering Coulomb Friction,” Int. J. Precis. Eng. Manuf.-Green Tech., Vol. 1, No. 3, pp. 191–199, 2014.
4. Yoon, H. S., Lee, J. Y., Kim, H. S., Kim, M. S., Kim, E. S., et al., “A Comparison of Energy Consumption in Bulk Forming, Substractive, and Additive Processes: Review and Case Study,” Int. J. Precis. Eng. Manuf.-Green Tech., Vol. 1, No. 3, pp. 261–279, 2014.
5. Kohopää, J., Hakonen, H., and Kivivuori, S., “Wear Resistance of Hot Forging Tools Surfaced by Welding,” Wear, Vol. 130, No. 1, pp. 103–112, 1989.
6. Lange, K., Cser, L., Geiger, M., and Kals, J. A. S., “Tool Life and Tool Quality in Bulk Metal Forming,” Annals of CIRPManufacturing Technology, Vol. 41, No. 2, pp. 667–675, 1992.
7. Kang, J. H., Park, I. W., Jae, J. S., and Kang, S. S., “A Study on Die Wear Model Considering Thermal Softening (III): Application of the Suggested Wear Model,” Journal of Materials Processing Technology, Vol. 94, No. 2–3, pp. 53–58, 1999.
8. Lee, R. S. and Jou, J. L., “Application of Numerical Simulation for Wear Analysis of Warm Forging Die,” Journal of Materials Processing Technolog, Vol. 140, No. 1–3, pp. 43–48, 2003.
9. Doege, E., Groche, P., and Bobke, T., “Application of Adhesion Theory to Friction and Wear Processes in Hot Die Forging,” Advanced Technology of Plasticity, Vol. 1, No. pp. 27–32, 1990.
10. Ahn, D. G., “Hardfacing Technologies for Improvement of Wear Characteristics of Hot Working Tools: A Review,” Int. J. Precis. Eng. Manuf., Vol. 14, No. 7, pp. 1271–1283, 2013.
11. Jiang, W. H. and Kovacevic, R., “Laser Deposited TiC/H13 Tool Steel Composite Coatings and their Erosion Resistance,” Journal of Materials Processing Technology, Vol. 186, No. 1–3, pp. 331–338, 2007.
12. Dutta Majumdar, J., “Laser Assisted Composite Surfacing of Materials for Improved Wear Resistance,” Physics Procedia, Vol. 5, No. pp. 425–430, 2010.
13. Smurov, I., “Laser Cladding and Laser Assisted Direct Manufacturing,” Surface and Coatings Technology, Vol. 202, No. 18, pp. 4496–4502, 2008.
14. Shin, K. H., Natu, H., Dutta, D., and Mazumder, J., “A Method for the Design and Fabrication of Heterogeneous Objects,” Materials & Design, Vol. 24, No. 5, pp. 339–353, 2003.
15. Suchanek, J., Smrkovský, J., Blaškoviè, P., and Grinberg, N., “Erosive and Hydroabrasive Resistance of Hardfacing Materials,” Wear, Vol. 233–236, pp. 229–236, 1999.
16. Kashani, H., Amadeh, A., and Vatanara, M., “Improvement of Wear Resistance of Hot Working Tool Steel by Hardfacing Part 2-Case Study,” Materials Science and Technology, Vol. 24, No. 3, pp. 356–360, 2008.
17. Ming, Q., Lim, L., and Chen, Z., “Laser Cladding of Nickel-based Hardfacing Alloys,” Surface and Coatings Technology, Vol. 106, No. 2, pp. 174–182, 1998.
18. Persson, D. H., Jacobson, S., and Hogmark, S., “Effect of Temperature on Friction and Galling of Laser Processed NOREM 02 and Stellite 21,” Wear, Vol. 255, No. 1–6, pp. 498–503, 2003.
19. Suh, J. H., Kim, J. S., Han, J. H., Lee, D. H., and Hwang, S. S., “Development of a Technology for Amorphous Material (Co-Free) Hardfacing on Primary Side Component Materials using Laser Beam to Improve their Wear/Erosion. Corrosion Resistance,” Korea Atomic Energy Research Institute, Document ID: KAERI/RR-2047/99, 2000.
20. Navas, C., Conde, A., Cadenas, M., and De Damborenea, J., “Tribological Properties of Laser Clad Stellite 6 Coatings on Steel Substrates,” Surface Engineering, Vol. 22, No. 1, pp. 26–34, 2006.
21. Park, N. R. and Ahn, D. G., “A Study on the Effects of Hardfacing Thickness on Wear Characteristics of Stellite21 Hardfaced STD61 Hotworking Tool Steel at the Elevated Temperature,” Int. J. Precis. Eng. Manuf., Vol. 15, No. 5, pp. 941–944, 2014.
22. Korean Agency for Technology and Standards, “Test Methods for Vickers Hardness at Elevated Temperature,” KS B 0800, 2001.
23. ASTMG99-05, “Standard Test Method for Wear Testing with a Pinon-Disk Apparatus,” 2010.
24. Ahn, D. G., “Applications of Laser Assisted Metal Rapid Tooling Process to Manufacture of Molding & Forming Tools-State of the Art,” Int. J. Precis. Eng. Manuf., Vol. 12, No. 5, pp. 925–938, 2011.
25. Fouilland, L., Mansori, M. E., and Massaq, A., “Friction-Induced Work Hardening of Cobalt-base Hardfacing Deposits for Hot Forging Tools,” Journal of Materials Processing Technology, Vol. 209, No. 7, pp. 3366–3373, 2009.
26. Fouilland, L., El Mansori, M., and Gerland, M., “Role of Welding Process Energy on the Microstructural Variations in a Cobalt base Superalloy Hardfacing,” Surface and Coatings Technology, Vol. 201, No. 14, pp. 6445–6451, 2007.
27. Kim, J. K. and Kim, S. J., “The Temperature Dependence of the Wear Resistance of Iron-base NOREM 02 Hardfacing Alloy,” Wear, Vol. 237, No. 2, pp. 217–222, 2000.