Influence of the manufacturing process on the mechanical properties of flax/epoxy composites

Journal of Biobased Materials and Bioenergy

Volumn 8, Issue 1, 2014, Pages 69-76

  El Sawi, Ihab ^a   Bougherara, Habiba ^a   Zitoune, Redouane ^b   Fawaz, Zouheir ^a  

^a RYERSON UNIVERSITY   (Canada)

^b University of Toulouse Clement Ader Institute   (France)

Author keywords

Characterization; Composites; Flax; Manufacturing; Natural fibers; Water absorption

Indexed keywords

BONE; CHARACTERIZATION; COMPOSITE MATERIALS; COMPRESSION MOLDING; CURING; ELASTIC MODULI; FLAX; LINEN; MANUFACTURE; NATURAL FIBERS; PRESSURE VESSELS; SHEAR STRAIN; TENSILE STRENGTH; WATER ABSORPTION; YARN;

BIO-BASED MATERIALS; CROSS-LINK DENSITIES; LONGITUDINAL ELASTIC MODULUS; MANUFACTURING CONDITIONS; MANUFACTURING PROCESS; POTENTIAL MATERIALS; PROCESSING CONDITION; ULTIMATE TENSILE STRENGTH;

EPOXY RESINS;

EID: 84914179579     PISSN: 15566560     EISSN: 15566579     Source Type: Journal    
DOI: 10.1166/jbmb.2014.1410     Document Type: Article

References (20)

1. J. Gassan, I. Mildner, and A. K. Bledzki, Mech. Compos. Mater. 35, 435 (1999).
2. A. K. Bledzki, H. P. Fink, and K. Specht, J. Appl. Polym. Sci. Polymer Science 93, 2150 (2004).
3. R. H. Newman, Composites Part A: Applied Science and Manufacturing 40, 1615 (2009).
4. E. Sparniņš, A. Pupurs, J. Varna, R. Joffe, K. Nättinen, and J. Lampinen, Polym. Compos. 32, 2051 (2011).
5. A. Stamboulis, C. A. Baillie, S. K. Garkhail, H. G. H. van Melick, and T. Peijs, Appl. Compos. Mater. 7, 273 (2000).
6. D. Chandramohan and K. Marimuthu, 2011 International Conference on Nanoscience, Engineering and Technology (ICONSET), Chennai, India, November (2011), pp. 137-145.
7. S. Y. Park, W. J. Choi, and H. S. Choi, Compos. Struct. 92, 18 (2010).
8. M. L. Costa, M. C. Rezende, and S. F. M. de Almeida, Polym. Plast. Technol. Eng. 45, 691 (2006).
9. C. Baley, Composites Part A: Applied Science and Manufacturing 33, 939 (2002).
10. T. Hatakeyama, Y. Ikeda, and H. Hatakeyama, Die Makromolekulare Chemie 188, 1875 (1987).
11. H. H. Tatsuko Hatakeyama, Thermal Properties of Green Polymers and Biocomposites, Springer, Netherlands (2005), Vol. 4, p. 39.
12. M. Assarar, D. Scida, A. El Mahi, C. Poilâne, and R. Ayad, Materials and Design 32, 788 (2011).
13. D. Scida, M. Assarar, C. Poilâne, and R. Ayad, Composites Part B: Engineering 48, 51 (2013).
14. C. Baley, C. Morvan, and Y. Grohens, Macromolecular Symposia 222, 195 (2005).
15. L. V. J. Lassila, T. Nohrström, and P. K. Vallittu, Biomaterials 23, 2221 (2002).
16. V. Bellenger, J. Verdu, and E. Morel, J. Polym. Sci., Part B: Polym. Phys. 25, 1219 (1987).
17. G. Wisanrakkit and J. K. Gillham, J. Appl. Polym. Sci. 41, 2885 (1990).
18. H. Dhakal, Z. Zhang, N. Bennett, A. Lopez-Arraiza, and F. Vallejo, J. Compos. Mater. (2013), doi: 10.1177/0021998313487238.
19. M. Tajvidi and G. Ebrahimi, J. Appl. Polym. Sci. 88, 941 (2003).
20. R. H. T. A. Newman, E. C. Clauss, and M. J. Le Guen, Advanced Materials Research 29-30, 287 (2007).