Chemical-free extraction of cotton stalk bark fibers by steam flash explosion

BioResources

Volumn 9, Issue 4, 2014, Pages 6950-6967

  Hou, Xiuliang ^a   Sun, Fangfang ^a   Zhang, Li ^a   Luo, Jun ^a   Lu, Denghong ^b   Yang, Yiqi ^a,c  

^a JIANGNAN UNIVERSITY   (China)

^b TRYD Textile Research Institute   (China)

^c UNIVERSITY OF NEBRASKA LINCOLN   (United States)

Author keywords

Agricultural byproducts; Bark of cotton stalks; Cotton stalk bark fibers; Lignocellulose; Steam flash explosion; Steam pressure

Indexed keywords

ALKALINITY; BYPRODUCTS; CELLULOSE; COTTON; EXPLOSIONS; FIBERS; MOISTURE; STEAM; TENSILE STRENGTH;

AGRICULTURAL BY-PRODUCTS; BARK FIBER; COTTON STALK; LIGNOCELLULOSE; STEAM PRESSURES;

REGAIN;

BARK; COTTON STALKS; CRYSTALLINITY; DECAY; EXTRACTION; FIBERS; TEMPERATURE;

GOSSYPIUM HIRSUTUM;

EID: 84911420507     PISSN: None     EISSN: 19302126     Source Type: Journal    
DOI: 10.15376/biores.9.4.6950-6967     Document Type: Article

References (45)

1. ASTM D2654-89a (1998). "Test methods for moisture in textiles". American Society for Testing and Materials, West Conshohocken, PA.
2. Cao, S. J., Tan, B., Liu, S. R., Feng, Y. H., and Qu, J. P. (2011). "Effect of continuous steam explosion on mechanical properties of PP/cotton stalk composites". China Plast. Ind. 39(7), 60-63.
3. Chang, J., Cheng, W., Yin, Q. Q., Zuo, R. Y., Song, A. D., Zheng, Q. H., Wang, P., Wang, X., and Liu, J. X. (2012). "Effect of steam explosion and microbial fermentation on cellulose and lignin degradation of corn stover". Bioresour. Technol. 104, 587-592. DOI: 10.1016/j.biortech.2011.10.070
4. Chen, W. H., Tsai, C. C., Lin, C. F., Tsai, P. Y., and Hwang, W. S. (2013). "Pilot-scale study on the acid-catalyzed steam explosion of rice straw using a continuous pretreatment system". Bioresour. Technol. 128, 297-304. DOI: 10.1016/j.biortech.2012.10.111
5. Cherian, B. M., Leão, A. L., de Souza, S. F., Thomas, S., Pothan, L. A., and Kottaisamy, M. (2010). "Isolation of nanocellulose from pineapple leaf fibres by steam explosion". Carbohyd. Polym. 81(3), 720-725. DOI: 10.1016/j.carbpol.2010.03.046
6. Das, S., Saha, A. K., Choudhury, P. K., Basak, R. K., Mitra, B. C., Todd, T., Lang, S., and Rowell, R. M. (2000). "Effect of steam pretreatment of jute fiber on dimensional stability of jute composite". J. Appl. Polym. Sci. 76(11), 1652-1661. DOI: 10.1002/(SICI)1097-4628(20000613)76:11<1652::AID-APP6>3.3.CO;2-O
7. Dong, Z., Hou, X. L., Sun, F. F., Zhang, L., and Yang, Y. Q. (2014). "Textile grade long natural cellulose fibers from bark of cotton stalks using steam explosion as a pretreatment". Cellulose. DOI: 10.1007/s10570-014-0401-5
8. French, A. (2014). "Idealized powder diffraction patterns for cellulose polymorphs". Cellulose 21, 885-896. DOI: 10.1007/s10570-013-0030-4
9. GB 5889-86. (1986) "Method of quantitative analysis of ramie chemical components". China National Standardization Management Committee, China.
10. Habibi, Y., El-Zawawy, W. K., Ibrahim, M. M., and Dufresne, A. (2008). "Processing and characterization of reinforced polyethylene composites made with lignocellulosic fibers from Egyptian agro-industrial residues". Compos. Sci. Technol. 68(7-8), 1877-1885. DOI: 10.1016/j.compscitech.2008.01.008
11. Hassan, M. L., and Nada, A. M. A. (2003). "Utilization of lignocellulosic fibers in molded polyester composites". J. Appl. Polym. Sci. 87(4), 653-660. DOI: 10.1002/app.11400.
12. Hou, X. L., Sun, F. F., Yan D. D., Xu H. L., Dong Z., Li Q. C., and Yang Y. Q. (2014). "Preparation of lightweight polypropylene composites reinforced by cotton stalk fibers from combined steam flash-explosion and alkaline treatment". J. Clean Prod. DOI: 10.1016/j.jclepro.2014.07.018
13. Ibrahim, M. M., Agblevor, F. A., and El-Zawawy, W. K. (2010). "Isolation and characterization of cellulose and lignin from steam-exploded lignocellulosic biomass". BioResources 5(1), 397-418.
14. Jacquet, N., Quiévy, N., Vanderghem, C., Janas S., Blecker, C., Wathelet, B., Devaux, J., and Paquot, M. (2011). "Influence of steam explosion on the thermal stability of cellulose fibres". Polym. Degrad. Stabil. 96(9), 1582-1588. DOI: 10.1016/j.polymdegradstab.2011.05.021
15. Jacquet, N., Vanderghem, C., Danthine, S., Quiévy, N., Blecker, C., Devaux, J., and Paquot, M. (2012). "Influence of steam explosion on physicochemical properties and hydrolysis rate of pure cellulose fibers". Bioresour. Technol. 121, 221-227. DOI: 10.1016/j.biortech.2012.06.073
16. 2-catalyzed steam explosion: The effects of different severity on digestibility, accessibility, and crystallinity of lignocellulosic biomass". Biotechnol. Prog. 29(4), 909-916. DOI: 10.1002/btpr.1751
17. Li, L., Sun, J. L., and Jia, G. Q. (2012). "Properties of natural cotton stalk bark fiber under alkali treating". J. Appl. Polym. Sci. 125(S2), E534-E539. DOI: 10.1002/app.36987
18. Martín-Davison, J. S., Ballesteros, M., Manzanares, P., Sepúlveda, X. P. B., and Vergara-Fernández, A. (2014). "Effects of temperature on steam explosion pretreatment of poplar hybrids with different lignin contents in bioethanol production". Int. J. Green Energy published online. DOI: 10.1080/15435075.2014.887569
19. Moran, J. I., Alvarez, V. A., Cyras, V. P., and Vazquez, A. (2008). "Extraction of cellulose and preparation of nanocellulose from sisal fibers". Cellulose 15(1), 149-159. DOI: 10.1007/s10570-007-9145-9
20. Oliveira, F. M. V., Pinheiro, I. O., Souto-Maior, A. M., Martin, C., Goncalves, A. R., and Rocha, G. J. M. (2013). "Industrial-scale steam explosion pretreatment of sugarcane straw for enzymatic hydrolysis of cellulose for production of second generation ethanol and value-added products". Bioresour. Technol. 130, 168-173. DOI: 10.1016/j.biortech.2012.12.030
21. Ouajai, S., and Shanks, R. A. (2005). "Composition, structure and thermal degradation of hemp cellulose after chemical treatments". Polym. Degrad. Stabil. 89(2), 327-335. DOI: 10.1016/j.polymdegradstab.2005.01.016
22. Pan, G. W., Hou, X. L., Zhu, S., Wang, N., Zhao, Z., and Huang, D. (2012). "Preparation and properties of wheat straw fibers for composites". Trans. Chin. Soc. Agric. Eng. 28(9), 287-292.
23. Pan, G. W., Hou, X. L., Lian, Y., Hou, M. M., Huang, D., and Yang, Y. Q. (2013). "Study on the degradation properties of poly (lactic acid) /wheat straw fibers composites". New Chem. Mater. 41(1), 149-151.
24. Pang, F., Xue, S. L., Yu, S. S., Zhang, C., Li, B., and Kang, Y. (2013). "Effects of combination of steam explosion and microwave irradiation (SE-MI) pretreatment on enzymatic hydrolysis, sugar yields and structural properties of corn stover". Ind. Crops Prod. 42, 402-408. DOI: 10.1016/j.indcrop.2012.06.016
25. Qi, C. S., Guo, K. Q., and Liu, Y. Y. (2012). "Preparation and properties of cotton stalk bundles and high-density polyethylene composites using hot-press molding". J. Reinf. Plast. Comp. 31(15), 1017-1024. DOI: 10.1177/0731684411435726
26. Qu, J. P., Tan, B., Feng, Y. H., and Hu, S. X. (2011). "Mechanical properties of poly (butylene succinate) reinforced with continuously steam-exploded cotton stalk bast". Polym.-Plast. Technol. 50(14), 1405-1411. DOI: 10.1080/03602559.2011.593081
27. Reddy, N. and Yang, Y. Q. (2009). "Properties and potential applications of natural cellulose fibers from the bark of cotton stalk". Bioresour. Technol. 100(14), 3563-3569. DOI: 10.1016/j.biortech.2009.02.047
28. Ruiz, E., Cara, C., Manzanares, P., Ballesteros, M., and Castro, E. (2008). "Evaluation of steam explosion pre-treatment for enzymatic hydrolysis of sunflower stalks". Enzym. Microb. Tech. 42(2), 160-166. DOI: 10.1016/j.enzmictec.2007.09.002
29. Smole, M. S., Hribernik, S., Kleinschek, K. S., and Kreže, T. (2013). "Plant fibres for textile and technical applications". in: Advances in Agrophysical Research, S. Grundas (ed.), InTech, Vienna, Austria. DOI: 10.5772/52372
30. Taherzadeh, M. J., and Karimi, K. (2008). "Pretreatment of lignocellulosic wastes to improve ethanol and biogas production: A review". Int. J. Mol. Sci. 9(9), 1621-1651. DOI: 10.3390/ijms9091621
31. Tan, B., Qu, J. P., Liu, L. M., Feng, Y. H., Hu S. X, and Yin, X. C. (2011). "Non-isothermal crystallization kinetics and dynamic mechanical thermal properties of poly(butylene succinate) composites reinforced with cotton stalk bast fibers". Thermochim. Acta 525(1-2), 141-149. DOI: 10.1016/j.tca.2011.08.003
32. Thakur, V. K., Thakur, M. K., Raghavan, P., and Kessler, M. R. (2014). "Progress in green polymer composites from lignin for multifunctional applications: A review". ACS Sust. Chem. Eng. 2(5), 1072-1092. DOI: 10.1021/sc500087z
33. Troedec, M. L., Rachini, A., Peyratout, C., Rossignol, S., Max, E., Kaftan, O., Fery, A., and Smith, A. (2011). "Influence of chemical treatments on adhesion properties of hemp fibres". J. Colloid. Interf. Sci. 356(1), 303-310. DOI: 10.1016/j.jcis.2010.12.066
34. Vivekanand, V., Ryden, P., Horn, S. J., Tapp, H. S., Wellner, N., Eijsink, V. G. H., and Waldron, K. W. (2012). "Impact of steam explosion on biogas production from rape straw in relation to changes in chemical composition". Bioresour. Technol. 123, 608-615. DOI: 10.1016/j.biortech.2012.06.088
35. Wang, K., Jiang, J. X., Xu, F., and Sun, R. C. (2009). "Influence of steam pressure on steam explosion pretreatment of Lespedeza stalks (Lespedeza crytobotrya): Part 1. Characteristics of degraded cellulose". Polym. Degrad. Stabil. 94(9), 1379-1388. DOI: 10.1016/j.polymdegradstab.2009.05.019.
36. Wang, N., and Chen, H. Z. (2013). "Manufacture of dissolving pulps from cornstalk by novel method coupling steam explosion and mechanical carding fractionation". Bioresour. Technol. 139, 59-65. DOI: 10.1016/j.biortech.2013.04.015
37. Wu, Y., Wang, S. Q., Zhou, D. G., Xing, C., Zhang, Y., and Cai, Z. Y. (2010). "Evaluation of elastic modulus and hardness of crop stalks cell walls by nano-indentation". Bioresour. Technol. 101(8), 2867-2871. DOI: 10.1016/j. biortech. 2009.10.074
38. Yan, D. D., Zhu, S., Hou, X. L., Pan, G. W., Ma, L. Y., and Dong, Z. (2013). "Extraction of cotton stalk fiber and its structure and properties". Mater. Rev. 27(6), 102-106.
39. Yang, H. P., Yan, R., Chen, H. P., Lee, D. H., and Zheng, C. G. (2007). "Characteristics of hemicellulose, cellulose and lignin pyrolysis". Fuel 86(12-13), 1781-1788. DOI: 10.1016/j.fuel.2006.12.013
40. Yano, S., Hatakeyama, H., and Hatakeyama, T. (1976). "Effect of hydrogen bond formation on dynamic mechanical properties of amorphous cellulose". J. Appl. Polym. Sci. 20(12), 3221-3231. DOI: 10.1002/app.1976.070201203
41. Yu, Z. D., Zhang, B. L., Yu, F. Q., Xu, G. Z., and Song, A. D. (2012). "A real explosion: The requirement of steam explosion pretreatment". Bioresour. Technol. 121, 335-341. DOI: 10.1016/j.biortech.2012.06.055
42. Yzombard, A., Gordon, S. G., and Miao, M. H. (2014). "Morphology and tensile properties of bast fibers extracted from cotton stalks". Text. Res. J. 84(3), 303-311. DOI: 10.1177/0040517513495949
43. Zhao, W., Yang, R. J., Zhang, Y. Q., and Wu, L. (2012). "Sustainable and practical utilization of feather keratin by an innovative physicochemical pretreatment: High density steam flash-explosion". Green Chem. 14(12), 3352-3360. DOI: 10.1039/c2gc36243k
44. Zhou, X. Y., Zheng, F., Li, H. G., and Lu, C. L. (2010). "An environment-friendly thermal insulation material from cotton stalk fibers". Energ. Buildings 42(7), 1070-1074. DOI: 10.1016/j.enbuild.2010.01.020
45. Zhou, L., Shao, J. Z., Feng, X. X., and Chen, J. Y. (2012). "Effect of high-temperature degumming on the constituents and structure of cotton stalk bark fibers". J. Appl. Polym. Sci. 125(S2), E573-E579. DOI: 10.1002/app.36392