Mortar-based systems for externally bonded strengthening of masonry

Materials and Structures/Materiaux et Constructions

Volumn 47, Issue 12, 2014, Pages 2021-2037

  de Felice, Gianmarco ^a   De Santis, Stefano ^a   Garmendia, Leire ^b   Ghiassi, Bahman ^c   Larrinaga, Pello ^b   Lourenço, Paulo B ^c   Oliveira, Daniel V ^c   Paolacci, Fabrizio ^a   Papanicolaou, Catherine G ^d  

^a ROMA TRE UNIVERSITY   (Italy)

^b TECNALIA RESEARCH AND INNOVATION   (Spain)

^c UNIVERSITY OF MINHO   (Portugal)

^d UNIVERSITY OF PATRAS   (Greece)

Author keywords

Bond tests; Masonry; Mortar based composites; Tensile tests

Indexed keywords

EMBEDDED SYSTEMS; FIBER REINFORCED PLASTICS; REINFORCEMENT; TENSILE TESTING;

BOND TEST; FIBRE REINFORCED POLYMERS; INORGANIC MATRICES; MASONRY; MASONRY STRUCTURES; MECHANICAL PERFORMANCE; REINFORCEMENT SYSTEMS; STRUCTURAL BEHAVIOUR;

MORTAR;

EID: 84910145574     PISSN: 13595997     EISSN: None     Source Type: Journal    
DOI: 10.1617/s11527-014-0360-1     Document Type: Article

References (41)

1. Ascione L, Feo L, Fraternali F (2005) Load carrying capacity of 2D FRP/strengthened masonry structures. Compos Part B Eng 36(8):619–626
2. Babaeidarabad S, De Caso F, Nanni A (2013) Out-of-plane behavior of URM walls strengthened with fabric-reinforced cementitious matrix composite. J Compos Constr. doi:10.1061/(ASCE)CC.1943-5614.0000457
3. Balsamo A, Di Ludovico M, Prota A, Manfredi G (2011) Masonry walls strengthened with innovative composites. American Concr Inst 2(275):769–786
4. Borri A, Castori G, Corradi M (2011) Shear behavior of masonry panels strengthened by high strength steel cords. Constr Build Mater 25(2):494–503
5. Brameshuber W (2006) Textile reinforced concrete. State-of-the-art report of RILEM Technical Committee 201-TRC. Report 36, Bagneux, RILEM
6. Cancelli AN, Aiello MA, Casadei P (2007) Experimental investigation of bond properties of SRP/SRG—masonry systems. In: fiber reinforced polymer reinforcement for concrete structures—FRPRCS-8, Proceedings of the 8th International Symposium, Patras, Greece
7. Carbone I, de Felice G (2008) Bond performance of fibre reinforced grout on brickwork specimens. In: Proceedings of the SAHC 2008 6th International Conference on Structural Analysis of Historic Constructions, Bath, UK
8. Carbone I, de Felice G (2009) Debonding of CTRM composite on masonry support. In: Proceedings of the Prohitec 09 International Conference on Protection of Historical Buildings, Rome, Italy
9. Carozzi FG, Milani G, Poggi C (2014) Mechanical properties and numerical modeling of Fabric Reinforced Cementitious Matrix (FRCM) systems for strengthening of masonry structures. Compos Struct 107:711–725
10. Ceroni F, de Felice G, Grande E, Malena M, Mazzotti C, Sacco E, Valluzzi MR (2014). Modeling of the FRP-masonry bond behavior
11. CNR (2012). CNR-DT 200 R1/2012. Guidelines for the design and construction of externally bonded FRP systems for strengthening existing structures. Italian Research Council, Italy
12. Colombo IG, Magri A, Zani G, Colombo M, di Prisco M (2013) Textile Reinforced Concrete: experimental investigation on design parameters. RILEM Mater Struct. doi:10.1617/s11527-013-0017-5
13. Contamine R, Si Larbi A, Hamelin P (2011) Contribution to direct tensile testing of textile reinforced concrete (TRC) composites. Mater Sci Eng 528:8589–8598
14. Corradi M, Borri A, Vignoli A (2002) Strengthening techniques tested on masonry structures struck by the Umbria-Marche earthquake of 1997–1998. Constr Build Mater 16(4):229–239
15. Cuypers H, Wastiels J (2006) A stochastic cracking theory for the introduction of matrix multiple cracking in textile reinforced concrete under tensile loading. In: Proceedings of the 1st International RILEM Symposium. RILEM Technical Committee 201-TRC. Aachen, Germany, pp 193–202
16. D’Ambrisi A, Feo L, Focacci F (2013) Experimental and analytical investigation on bond between Carbon-FRCM materials and masonry. Compos Part B Eng 46:15–20
17. D’Antino T, Carloni C, Sneed LH, Pellegrino C (2014) Matrix-fiber bond behavior in PBO FRCM composites: a fracture mechanics approach. Eng Fract Mech 117:94–111
18. EN 1015-11 (2007) Methods of test mortar for masonry—Part 11: Determination of flexural and compressive strength of hardened mortar
19. EN 1926 (2006) Natural stone test methods. Determination of uniaxial compressive strength
20. EN 772-1 (2002) Methods of test for masonry units—Part 1: Determination of compressive strength
21. Faella C, Martinelli E, Paciello S, Nigro E (2008) Adhesion of advanced composites on masonry: experimental study and numerical analysis. In: Proceedings of the CICE2008 Fourth International Conference on FRP Composites in Civil Engineering, Zurich
22. Garmendia L, San-José JT, García D, Larrinaga P (2011) Rehabilitation of masonry arches with compatible advanced composite material. Constr Build Mater 25(12):4374–4385
23. Garmendia L, San-José JT, Larrinaga P, García D (2012) Textile Reinforced Mortar as strengthening material for masonry arches. Int J Architectural Heritage. doi:10.1080/15583058.2012.704480
24. Grande E, Imbimbo M, Sacco E (2011) Bond behaviour of CFRP laminates glued on clay bricks: experimental and numerical study. Compos Part B Eng 42(2):330–340
25. Grande E, Imbimbo M, Sacco E (2013) Modeling and numerical analysis of the bond behavior of masonry elements strengthened with SRP/SRG. Compos Part B Eng 55:128–138
26. Hartig J, Jesse F, Schicktanz K, Häußler-Combe U (2012) Influence of experimental setups on the apparent uniaxial tensile load-bearing capacity of textile reinforced concrete specimens. RILEM Mater Struct 45(3):433–446
27. Häußler-Combe U, Hartig J (2007) Bond and failure mechanisms of textile reinforced concrete (TRC) under uniaxial tensile loading. Cem Concr Compos 29(4):279–289
28. Hegger J, Will N, Bruckermann O, Voss S (2006) Load-bearing behaviour and simulation of textile reinforced concrete. RILEM Mater Struct 39(8):765–776
29. ICC (2013) AC434 Proposed acceptance criteria for masonry and concrete strengthening using fiber-reinforced cementitious matrix (FRCM) composite systems. ICC-Evaluation Service, Whittier
30. Malena M, de Felice G (2014) Externally bonded composites on a curved masonry substrate: experimental results and analytical formulation. Compos Struct 112:194–206
31. Matana M, Nanni A, Dharani L, Silva P, Tunis G (2005) Bond performance of steel reinforced polymer and steel reinforced grout. In: Proceedings of the International Symposium on Bond Behaviour of FRP in Structures (BBFS), Hong Kong, China
32. Ohno S, Hannant DJ (1994) Modeling the stress–strain response of continuous fiber reinforced cement composites. ACI Mater J 91(3):306–312
33. Oliveira DV, Basilio I, Lourenço PB (2011) Experimental bond behavior of FRP sheets glued on brick masonry. ASCE J Compos Constr 15(1):32–41
34. Ortlepp R, Hampel U, Curbach M (2006) A new approach for evaluating bond capacity or TRC strengthening. Cem Concr Compos 28(7):589–597
35. Pacheco-Torgal F, Jalali S (2011) Cementitious building materials reinforced with vegetable fibres: a review. Constr Build Mater 25(2):575–581
36. Papanicolaou CG, Triantafillou TC, Karlos K, Papathanasiou M (2007) Textile-reinforced mortar (TRM) versus FRP as strengthening material of URM walls: in-plane cyclic loading. RILEM Mater Struct 40(10):1081–1097
37. Papanicolaou CG, Triantafillou TC, Papathanasiou M, Karlos K (2008) Textile-reinforced mortar (TRM) versus FRP as strengthening material of URM walls: out-of-plane cyclic loading. RILEM Mater Struct 41(1):143–157
38. Triantafillou TC, Fardis MN (1997) Strengthening of historic masonry structures with composite materials. RILEM Mater Struct 30:486–496
39. Valluzzi MR, Modena C, de Felice G (2014) Current practice and open issues in strengthening historical buildings with composites
40. Valluzzi MR, Oliveira DV, Caratelli A, Castori G, Corradi M, de Felice G, Garbin E, Garcia D, Garmendia L, Grande E, Ianniruberto U, Kwiecień A, Leone M, Lignola GP, Lourenço PB, Malena M, Micelli F, Panizza M, Papanicolaou CG, Prota A, Sacco E, Triantafillou TC, Viskovic A, Zając B, Zuccarino G (2012) Round Robin test for composite-to-brick shear bond characterization. RILEM Mater Struct 45(12):1761–1791
41. Valluzzi MR, Valdemarca M, Modena C (2001) Behavior of brick masonry vaults strengthened by FRP laminates. ASCE J Compos Constr 5(3):163–169