A review of data analysis methods for electrical industrial process tomography applications

4th World Congress in Industrial Process Tomography

Volumn , Issue , 2005, Pages 906-921

  Romanowski, Andrzej ^a   Grudzien, Krzysztof ^a   Williams, Richard A ^b  

^a LODZ UNIVERSITY OF TECHNOLOGY   (Poland)

^b UNIVERSITY OF LEEDS   (United Kingdom)

Author keywords

Data analysis methods; Electrical tomography; Image post processing; Raw data analysis

Indexed keywords

INFORMATION ANALYSIS; TOMOGRAPHY;

DATA ANALYSIS METHODS; ELECTRICAL SENSING; ELECTRICAL TOMOGRAPHY; INDUSTRIAL PROCESS TOMOGRAPHY; POST PROCESSING; PRIORI INFORMATION; RECONSTRUCTION METHOD; SYSTEMATIC REVIEW;

DATA HANDLING;

EID: 84910113067     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (36)

1. AYKROYD, R. G., MENG, S., WEST, R. M., (2003), Spatial-temporal Modelling for Nonlinear Inverse Problem in Industrial Process Tomography, Report No. STAT-03/05, Dept. of Statistics, University of Leeds, http://www.maths.leeds.ac.uk/∼robert.
2. BECK, M. S., DYAKOWSKI, T., WILLIAMS, R. A., (1998) Process Tomography – the State of the Arts, Trans Inst MC., Vol 20, No 4.
3. BECK, M. S., PLĄSKOWSKI A., (1987), Cross Correlation Flowmeters – their Design and Application, Adam Hilger, Bristol, UK.
4. BENNETT, M. A., WEST, R. M., LUKE, S. P., JIA, X., WILLIAMS, R. A., (1999) Measurement and Analysis of Flows in Gas-liquid Column Reactor, Chemical Engineering Science, 54, pp. 5003-5012.
5. DYAKOWSKI, T., WILLIAMS R. A., (1993) Measurement of Particle Velocity Distribution in a Vertical Channel, Powder Technology, 77(2), pp. 135-142.
6. DYAKOWSKI, T., (1996), Process Tomography Applied to Multi-Phase Flow Measurement, Measurement Science and Technology, 7, pp 343-353.
7. DYAKOWSKI, T., MOSOROW, V., SANKOWSKI, D., SEATON, M., MAZURKIEWICZ, L., GRUDZIEŃ, K., JAWORSKI, A., (2003), Virtual Channel Concept for Measuring Solids Mass Flow Rate, 3rd World Congress on Industrial Process Tomography, Banff, Canada, pp. 535-540.
8. GRUDZIEN, K., ROMANOWSKI, A., WILLIAMS, R. A., AYKROYD, R. G., WEST, R., MENG, S., (2004), Application of the Bayesian Approach to Powder Flow Investigations, submitted to International Process Tomography Symposium, 2004 9th-10th September, Poland, Lodz, pp. 72-76.
9. GRUDZIEN, K., ROMANOWSKI, A., WILLIAMS, R. A., SANKOWSKI, D., (2005), Methods for Analysis of Hopper Flow Behaviour using Electrical Capacitance Tomography, submitted to 4th Congress on Industrial Process Tomography, Japan.
10. HERVIEU, E., SELEGHIM, P., (1999), Direct Imaging of Two-Phase Flows by Electrical Impedance Measurements, 1st World Congress on Industrial Process Tomography, 1999.
11. ISAKSEN, O., NORDTVEDT, J. E., (1993) A New Reconstruction Algorithm for Process Tomography, Meas. Sci. Technol. 4, pp. 1464-1475.
12. JAWORSKI A. AND DYAKOWSKI T., (2002), Investigations of flow instabilities within the dense pneumatic conveying system, Powder Technology, 125, pp. 279-291.
13. JEANMEURE, L. F. C., DYAKOWSKI, T., ZIMERMAN, W. B.J., CLARK, W., (2002), Use of Raw Capacitance Tomography Data for Flow Pattern Control, Experimental Thermal and Fluid Science, 26, pp. 763-773.
14. KAIPIO J. P., KOLEHMAINEN V., SOMERSALO E., VAUHKONEN M., (2000) Statistical inversion and Monte Carlo sampling methods in electrical impedance tomography", Inv Probl, vol. 16, pp. 1487-1522.
15. LIONHEART, W. R. B., (2001), Reconstruction Algorithms for Permittivity and Conductivity Imaging, 2nd World Congress on Industrial Process Tomography, Hannover, Germany, pp. 4-11.
16. LIONHEART, W. R. B., (2004), Review: Developments in EIT Reconstruction Algorithms: Pitfalls, Challenges and Recent Developments, Physiol. Meas., 25, pp. 125-142.
17. MANN, R., DICKING, F. J., WANG, M., DYAKOWSKI, T., WILLIAMS, R. A., EDWARDS, R. B., FORREST, A. E., HOLDEN, P. J., (1997), Application of Electrical Resistance Tomography to Interrogate Mixing Processes at Plant Scale, Chem. Eng., Sci., 52, pp. 2087-2097.
18. McCORMICK S F., WANDE J G., (1993), Multigrid Solution of a Linearised Regularised Least-Squares Problem in Electrical Impedance Tomography, Inverse Problem, 9, pp. 697-713.
19. MAZURKIEWICZ, L., BANASIAK, R., WAJMAN, R., DYAKOWSKI, T., SANKOWSKI, D., (2005), this volume.
20. MOSOROV, V., SANKOWSKI, D., MAZURKIEWICZ, L., DYAKOWSKI, T., (2002), The Application of Electrical Capacitance Tomography for Solids Mass Flow Measurements. Measurement Science and Technology, 12, pp 1810-1814.
21. OSTROWSKI, K. L., LUKE, S. P., BENETT, M. A., WILLIAMS, R. A., (1999), Real Time Visualisation and Analysis of Dense Phase Powder Conveying, Powder Technol., 102, pp. 1-13.
22. ROMANOWSKI, A., GRUDZIEN, K., AYKROYD, R. G., SANKOWSKI, D., (2004), Application of the Bayesian/MCMC Approach to Investigation of the Phenomena Present in Multiphase Processes. Bulletin De La Societe Des Sciences Et Des Letters De Lodz, Vol. LIV, pp. 31-44.
23. ROMANOWSKI, A., GRUDZIEN, K., AYKROYD, R. G., WILLIAMS, R. A., WEST, R., MENG, S., (2004), An Introduction to the Bayesian/MCMC Approach as a Recently Developed Methodology for Tomographic Data Analysis, International Process Tomography Symposium, 2004 9th-10th September, Poland, Lodz, pp. 134-138.
24. SEPPÄNEN, A. M., VAUHKONEN, M., VAUHKONEN, P. J., SOMERSALO, E., KAIPIO, J. P., (2001), State Estimation with Fluid Dynamical Evolution Models in Process Tomography -an Application to Impedance Tomography, (2001) Inverse Problems, 17, pp. 467-483.
25. SIMONS, S. J. R., TABE, H. T., WEST, R. M., WILLIAMS, R. A., (1999), Reduction of Tomographic Data For Use In The Control of Multiphase Processes, Chem. Eng. Comm., 1999, 175, pp. 99-115.
26. VAUKHONEN, M., KAPIO, J. P., SOMERSALO, E., KARJALAINEN, P. A., (1997) Electrical Impedance Tomography with Basis Constraints”, Inverse Problems, 13, pp. 523-530.
27. WANG, M., WULIANG, Y., (2001), Measurements of the Angular Velocity Distribution in Miscible Liquid Mixing using Electrical Resistance Tomography, 2nd World Congress on Industrial Process Tomography, Hannover, Germany, pp. 146-150.
28. WANG, S., DYAKOWSKI, T., XIE, C-G., WILLIAMS, R., BECK, M. S., (1996), Tomographic Imaging of Phase Distribution and Spatial Correlation of the Fluidization Dynamics In a Fluidized Bed, Part. Part. Syst. Charact., 13, pp. 333-338.
29. WARSITO, W., FAN, L. S., (2001), Neural Network Based Multi-criterion Optimization Image Reconstruction Techniques for Imaging Two and Three-phase Flow Systems using Electrical Capacitance Tomography, J. Phys. Meas. Sci. Techno., 12, pp. 2198-221.
30. WEST, R. M., JIA, X., WILLIAMS, R. A., (2000), Parametric Modelling in Industrial Process Tomography, Chem. Eng. J., 77, pp. 31-36.
31. WEST, R. M., SCOTT, D. M., SUNSHINE, G., KOSTUCH, J., HEIKKINEN, L., VAUHKONEN, M., HOYLE, B. S., SCHLABERG, H. I., HOU, R., WIILLIAMS, R. A., (2002), In Situ Imaging of Paste Extrusion using Electrical Impedance Tomography, Meas. Sci. Technol., 13, pp. 1890-1897.
32. WEST, R. M., MENG, S., AYKROYD, R. G. WILLIAMS, R. A., (2003) Spatial-temporal Modelling for Electrical Impedance Tomography of a Mixing Process, 3rd World Congress on Industrial Process Tomography, Banff, Canada, September, pp. 226-232.
33. YANG, W. Q., PENG, L., (2003), Image Reconstruction Algorithms for Electrical Capacitance Tomography, Meas. Sci. Technol. 14, R1-R13.
34. YANG, W. Q., LIU, S., (2000), Role of Tomography in Gas/Solids Flow Measurement, Flow Measurement and Instrumentation, 11, pp. 237-244.
35. YORK, T. A., MAZURKIEWICZ, L., POLYDORIDES, N., MANN, R., GRIEVE, B., (2003), Image Reconstruction for Pressure Filtration Using EIDORS 3D, 3rd World Congress on Industrial Process Tomography, pp. 559-564.
36. ZHOU, L., ZHANG, Y. C., YAO, D. Y., PENG, L. H., ZHANG, B. F., (2001), Using Principal Component Analysis to Measure Two-Phase Flow Concentration, 2nd World Congress on Industrial Process Tomography, Hannover, Germany, pp. 35-40.