Mechanical properties of austenitic stainless steel made by additive manufacturing

Journal of Research of the National Institute of Standards and Technology

Volumn 119, Issue , 2014, Pages 398-418

  Luecke, William E ^a,b   Slotwinski, John A ^a,c,d  

^a NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY   (United States)

^b Mechanical Performance Group   (United States)

^c CATHOLIC UNIVERSITY OF AMERICA   (United States)

^d JOHNS HOPKINS UNIVERSITY APPLIED PHYSICS LABORATORY   (United States)

Author keywords

Additive manufacturing; Hardness; Lueders bands; Tensile testing; UNS 174100

Indexed keywords

3D PRINTERS; ALLOY STEEL; ANISOTROPY; AUSTENITIC STAINLESS STEEL; HARDNESS; HEAT TREATMENT; MANUFACTURE; MELTING; PLATES (STRUCTURAL COMPONENTS); STEEL TESTING; STRESS RELIEF; STRESSES; TENSILE STRENGTH; TENSILE TESTING;

17-4 PH STAINLESS STEEL; ADDITIVE MANUFACTURING; DISCONTINUOUS YIELDING; LUEDERS BANDS; SELECTIVE LASER MELTING; TENSILE MECHANICAL PROPERTIES; UNS 174100; WROUGHT MATERIALS;

STRUCTURAL PROPERTIES;

EID: 84909998884     PISSN: None     EISSN: 21657254     Source Type: Journal    
DOI: 10.6028/jres.119.015     Document Type: Article

References (29)

1. Richard van Noort. The future of dental devices is digital. Dental Materials 28 (1), 3-12 (2012). http://dx.doi.org/10.1016/j.dental.2011.10.014
2. BBC. Transplant jaw made by 3D printer claimed as first, http://www.bbc.co.uk/news/technoiogy-16907104, February 2012. Accessed 2013-May 3.
3. Oak Ridge National Laboratory. ORNL - development of a technologically significant robotic hand. http://additivemanufacturing.com/2013/01/06/ornl-development-of-revolutionary-robotic-hand/, January 2013. Accessed 2013-May-3.
4. David L. Bourell, Ming C. Leu, and David W. Rosen, editors. Roadmap for Additive Manufacturing Identifying the Future of Freeform Processing. The University of Texas at Austin Laboratory for Freeform Fabrication Advanced Manufacturing Center, 1 University Station, MC C2200, Austin TX 78712-0292 USA, 2009. Available from: http://wohlersassociates.com/roadmap2009.html.
5. Energetics Incorporated, editor. Measurement Science Roadmap for Metal-Based Additive Manufacturing WORKSHOP SUMMARY REPORT, Columbia, Md, USA, 2013. Available from: http://events.energetics.com/NIST-AdditiveMfgWorkshop/pdfs/NISTAdd-MfgReport-FINAL.pdf.
6. ASTM International. Standard practice for numbering metals and alloys in the unified numbering system (UNS). Standard E527-12, ASTM International, W. Conshohocken, Pa, 2012. http://dx.doi.org/10.1520/E0527-12
7. th edition, 2012. ISBN 978-0-7680-7950-0.
8. J. A. Slotwinski, E. J. Garboczi, P. E. Stutzman, C. F. Ferraris, S. S. Watson, and M. A. Peltz. Characterization of metal powders used for additive manufacturing. J. Res. NIST 119 (2014). http://dx.doi.org/10.6028/jres.119.018
9. ASTM International. Standard test methods for tension testing of metallic materials [metric]. Standard E8/E8M-09, ASTM International, W. Conshohocken, Pa, 2011.
10. ASTM International. Standard practice for verification and classification of extensometer systems. Standard E83-06, ASTM International, W. Conshohocken, Pa, 2006. http://dx.doi.org/10.1520/E0083-06
11. EOS GmbH Electro Optical Systems. Stainless Steel Training Manual. Robert-Stirling-Ring 1 D-82152 Krailling/München, April 2007. Section 16.2.
12. US Department of Defense. Metallic materials and elements for aerospace vehicle structures. Handbook MIL-HDBK-5J, nited States of America Department of Defense, Jan 2003. Available from: http://www.everyspec.com/MIL-HDBK/MIL-HDBK+(0001+-+K)099)/MIL-HDBK-5J-139/.
13. Luca Facchini, Nério Vicente, Ivan Lonardelli, Emanuele Magalini, Pierfrancesco Robotti, and Alberto Molinari. Meta stable austenite in 17-4 precipitation-hardening stainless steel produced by selective laser melting. Advanced Engineering Materials 12 (3), 184-188 (2010). http://dx.doi.org/10.1002/adem.200900259
14. Juho Talonen, Hannu Hänninen, Pertti Nenonen, and Gersom Pape. Effect of strain rate on the strain-induced -martensite transformation and mechanical properties of austenitic stainless steels. Metallurgical and Materials Transactions A 36 (2), 421-432 (2005). http://dx.doi.org/10.1007/s11661-005-0313-y
15. S. S. Hecker, M. G. Stout, K. P. Staudhammer, and J. L. Smith. Effects of Strain State and Strain Rate on Deformation-Induced Transformation in 304 Stainless Steel: 1. Magnetic Measurements and Mechanical Behavior. Metallurgical Transactions A-Physical Metallurgy and Materials Science 13 (4), 619-626 (1982). http://dx.doi.org/10.1007/BF02644427
16. EOS GmbH Electro Optical Systems. EOS stainless steel GP1 for EOSINT M 270. Technical Report MM1/04.09, EOS GmbH -Electro Optical Systems, 2009. Retrieved 2013-03-29. Available from: ttp://www.eos.info/systems-solutions/metal/materials-material-management.
17. Per Öfverbeck, Bo Ivarsson, Rolf Sandström, and Gustaf Östberg. Statistical evaluation of elevated temperature minimum yield/proof stress values for design purposes. International Journal of Pressure Vessels and Piping 18 (2), 135-160 (1985). http://dx.doi.org/10.1016/0308-0161(85)90048-1
18. H. Yamanouchi, B. Kato, and H. Aoki. Statistical features of mechanical properties of current japanese steels. Materials and Structures 23 (4), 305-315 (1990). http://dx.doi.org/10.1007/BF02472204
19. Göran A. Alpsten. Variations in mechanical and cross-sectional properties of steel. In Thomas C. Kavanagh, Fazlur Khan, Edwin H. Gaylord, and Emilio Rosenblueth, editors, Tall Building Criteria and Loading, volume lb of Planning and Design of Tall Buildings, pages 755-805. American Society of Civil Engineers and International Association for Bridge and Structural Engineering, 1972. Proceedings-Intemational Conference on Planning and Design of Tall Buildings, Lehigh University, Bethlehem, Pennsylvania, August 21-26, 1972.
20. M. J. Baker. Variations in the mechanical properties of structural steels. In Proceedings of the Symposium on Concepts of Safety of Structures and Methods of Design, pages 165-174. Secretariate of the International Association for Bridge and Structural Engineering, 1969.
21. th St NW, Washington DC 20036, September 1974.
22. ASTM International. Interlaboratory study to establish precision statements for astm B557, standard test methods for tension testing wrought and cast aluminum and magnesium-alloy products and B557M, standard test methods for tension testing wrought and cast aluminum- and magnesium-alloy products [metric]. Research Report E28-1004, ASTM International, 100 Barr Harbor Dr, West Conshohocken, Pa, Mar 1984. Available from: http://www.astm.org/DATABASE.CART/RESEARCH-REPORTS/RR-E28-1004.htm.
23. Itziar Tolosa, Fermnin Garcianda, Fidel Zubiri, Fidel Zapirain, and Aritz Esnaola. Study of mechanical properties of AISI 316 stainless steel processed by "selective laser melting", following different manufacturing strategies. The International Journal of Advanced Manufacturing Technology 51 (5-8), 639-647 (2010). http://dx.doi.org/10.1007/s00170-010-2631-5
24. H. Khalid Rafi, Thomas L. Starr, and Brent E. Stucker. A comparison of the tensile, fatigue, and fracture behavior of T̄6A14V and 15-5 PH stainless steel parts made by selective laser melting. The International Journal of Advanced Manufacturing Technology 69 (5-8), 1299-1309 (2013). http://dx.doi.org/10.1007/s00170-013-5106-7
25. H. Meier and Ch. Haberland. Experimental studies on selective laser melting of metallic parts. Materialwissenschaft und Werkstofftechnik 39 (9), 665-670 (2008). http://dx.doi.org/10.1002/mawe.200800327
26. L. Rickenbacher, T. Etter, S. Hövel, and K. Wegener. High temperature material properties of IN738LC processed by selective laser melting (SLM) technology. Rapid Prototyping Journal 19 (4), 282-2090 (2013). http://dx.doi.org/10.1108/13552541311323281
27. Kai Guan, Zemin Wang, Ming Gao, Xiangyou Li, and Xiaoyan Zeng. Effects of processing parameters on tensile properties of selective laser melted 304 stainless steel. Materials and Design 50 (0), 581-586 (2013). ttp://dx.doi.org/10.1016/j.matdes.2013.03.056
28. G. T. Vanrooyen. Basic Factors which Influence Lüders Strain During Discontinuous Yielding. Materials Science and Engineering 7 (1), 37-48 (1971). http://dx.doi.org/10.1016/0025-5416(71)90059-0
29. S. Kyriakides and J. E. Miller. On the propagation of Lüders bands in steel strips. Journal of Applied Mechanics 67 (4), 645-654 (2000). http://dx.doi.org/10.1115/1.1328348