Basic effects of pulp refining on fiber properties - A review

Carbohydrate Polymers

Volumn 115, Issue , 2015, Pages 785-803

  Gharehkhani, Samira ^a   Sadeghinezhad, Emad ^a   Kazi, Salim Newaz ^a   Yarmand, Hooman ^a   Badarudin, Ahmad ^a   Safaei, Mohammad Reza ^b   Zubir, Mohd Nashrul Mohd ^a  

^a UNIVERSITY OF MALAYA   (Malaysia)

^b Young Researchers and Elite Club   (Iran)

Author keywords

Beating; Electrokinetic properties; Pulp refining; Refiner; Structural properties

Indexed keywords

CRYSTALLINITY; ELECTRODYNAMICS; FIBERS; PAPER AND PULP MILLS; PULP BEATING; REFINING; STRUCTURAL PROPERTIES;

ELECTROKINETIC PROPERTIES; FIBER CHARACTERISTICS; FIBER PROPERTIES; HIGH QUALITY PULPS; PAPER INDUSTRIES; REFINER; REFINING EQUIPMENT; SURFACE CHEMICAL COMPOSITION;

PULP REFINING;

FIBERS; PULPS; REFINING;

CHEMISTRY; ELECTROCHEMISTRY; PAPER; WOOD;

ELECTROCHEMISTRY; PAPER; WOOD;

EID: 84908644316     PISSN: 01448617     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.carbpol.2014.08.047     Document Type: Review

References (175)

1. Abdul Khalil, H. P. S., Bhat, A. H., & Ireana Yusra, A. F. (2012). Green composites from sustainable cellulose nanofibrils: A review. Carbohydrate Polymers, 87(2), 963-979.
2. Abdul Khalil, H. P. S., Davoudpour, Y., Islam, M. N., Mustapha, A., Sudesh, K., Dungani, R., et al. (2014). Production and modification of nanofibrillated cellulose using various mechanical processes: A review. Carbohydrate Polymers, 99(0), 649-665.
3. Abe, K., & Yano, H. (2009). Comparison of the characteristics of cellulose microfibril aggregates of wood, rice straw and potato tuber. Cellulose, 16(6), 1017-1023.
4. Afra, E., Yousefi, H., Hadilam, M. M., & Nishino, T. (2013). Comparative effect of mechanical beating and nanofibrillation of cellulose on paper properties made from bagasse and softwood pulps. Carbohydrate Polymers, 97(2), 725-730.
5. Agnihotri, S., Dutt, D., & Tyagi, C. (2010). Complete characterization of bagasse of early species of saccharum officinerum-co 89003 for pulp and paper making. BioResources, 5(2), 1197-1214.
6. Aloulou, F., Boufi, S., Belgacem, N., & Gandini, A. (2004). Adsorption of cationic surfactants and subsequent adsolubilization of organic compounds onto cellulose fibers. Colloid and Polymer Science, 283(3), 344-350.
7. Andersson, S. (2011). Low consistency refining of mechanical pulp: process conditions and energy efficiency. Sundsvall, Sweden: Mid Sweden University.
8. Banavath, H. N., Bhardwaj, N. K., & Ray, A. (2011). A comparative study of the effect of refining on charge of various pulps. Bioresource Technology, 102(6), 4544-4551.
9. Barnett, J., & Bonham, V. A. (2004). Cellulose microfibril angle in the cell wall of wood fibres. Biological Reviews, 79(2), 461-472.
10. Batchelor, W., Kjell-Arve, K., & Ouellet, D. (1999). Refining and the development of fibre properties. Nordic Pulp and Paper Research Journal, 14(4), 285-291.
11. Batchelor, W., Lundin, T., & Fardim, P. (2006). A method to estimate fiber trapping in low-consistency refining. Tappi Journal, 5(8), 31.
12. Batchelor, W., Martinez, D., Kerekes, R., & Ouellet, D. (1997). Forces on fibres in low-consistency refining: Shear force. Journal of Pulp and Paper Science, 23(1), J40-J45.
13. Beg, M. D. H., & Pickering, K. L. (2008). Mechanical performance of Kraft fibre reinforced polypropylene composites: Influence of fibre length, fibre beating and hygrothermal ageing. Composites Part A: Applied Science and Manufacturing, 39(11), 1748-1755.
14. Bergander, A., & Salmén, L. (2002). Cell wall properties and their effects on the mechanical properties of fibers. Journal of Materials Science, 37(1), 151-156.
15. Bhardwaj, N. K., Duong, T. D., & Nguyen, K. L. (2004). Pulp charge determination by different methods: Effect of beating/refining. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 236(1), 39-44.
16. Bhardwaj, N. K., Kumar, S., & Bajpai, P. K. (2004). Effects of processing on zeta potential and cationic demand of kraft pulps. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 246(1-3), 121-125.
17. Bhardwaj, N. K., Hoang, V., & Nguyen, K. L. (2007a). A comparative study of the effect of refining on physical and electrokinetic properties of various cellulosic fibres. Bioresource Technology, 98(8), 1647-1654.
18. Bhardwaj, N. K., Hoang, V., & Nguyen, K. L. (2007b). Effect of refining on pulp surface charge accessible to polydadmac and FTIR characteristic bands of high yield kraft fibres. Bioresource Technology, 98(4), 962-966.
19. Blomstedt, M. (2007). Modification of cellulosic fibers by carboxymethyl cellulose: Effects on fiber and sheet properties, Series A 27. Department of Forest Products Technology: Helsinki University of Technology.
20. Carrasco, F., Mutje, P., & Pelach, M. (1996). Refining of bleached cellulosic pulps: Characterization by application of the colloidal titration technique. Wood Science and Technology, 30(4), 227-236.
21. Chen, S.-L., Wang, S., & Lucia, L. A. (2004). New insights into the fundamental nature of lignocellulosic fiber surface charge. Journal of Colloid and Interface Science, 275(2), 392-397.
22. Chen, Y., Wan, J., Dong, X., & Ma, Y. (2013). Fiber properties of eucalyptus kraft pulp with different carboxyl group contents. Cellulose, 20(6), 2839-2846.
23. Chen, Y., Wan, J., Zhang, X., Ma, Y., & Wang, Y. (2012). Effect of beating on recycled properties of unbleached eucalyptus cellulose fiber. Carbohydrate Polymers, 87(1), 730-736.
24. Chen, Y., Wang, Y., Wan, J., & Ma, Y. (2010). Crystal and pore structure of wheat straw cellulose fiber during recycling. Cellulose, 17(2), 329-338.
25. Chinga-Carrasco, G. (2011). Cellulose fibres, nanofibrils and microfibrils: The morphological sequence of MFC components from a plant physiology and fibre technology point of view. Nanoscale Research Letters, 6(1), 1-7.
26. Clark, J. D. A. (1969). Fibrillation, free water, and fiber bonding. Tappi Journal, 52(2), 335-340.
27. Courchene, C. E., Peter, G. F., & Litvay, J. (2006). Cellulose microfibril angle as a determinant of paper strength and hygroexpansivity in Pinus taeda L. Wood and Fiber Science, 38(1), 112-120.
28. Cuberos-Martinez, P., & Park, S. W. (2012). Review of physical principles in low consistency refining. O Papel: revista mensal de tecnologia em celulose e papel, 73(8), 65-72.
29. Cui, Y., Pelton, R., & Ketelson, H. (2008). Shapes of polyelectrolyte titration curves 2. The deviant behavior of labile polyelectrolytes. Macromolecules, 41(21), 8198-8203.
30. Demler, C. L., Beder-Miller, S. E., & Aldridge, R. (2012). Refining case study: Using improved refiner control to increase pulp quality and paper machine performance. 2012 PaperCon Conference. Tappi.
31. Dietemann, P., & Roux, J.-C. (2005). A study of disc refiner running in no-load conditions. Cellulose Chemistry and Technology, 39(5-6), 459-471.
32. Donaldson, L. (2007). Cellulose microfibril aggregates and their size variation with cell wall type. Wood Science and Technology, 41(5), 443-460.
33. Ebringerová, A., Hromádková, Z., & Heinze, T. (2005). Hemicellulose. In T. Heinze (Ed.), Advances in Polymer Science (186) Polysaccharides I (pp. 1-67). Berlin Heidelberg: Springer.
34. El-Sharkawy, K. (2008). Different approaches to tailoring chemical pulp fibres. Finland: Helsinki University of Technology.
35. Fardim, P., & Duran, N. (2003). Modification of fibre surfaces during pulping and refining as analysed by SEM, XPS and ToF-SIMS. Colloids and Surfaces A-Physicochemical and Engineering Aspects, 223(1-3), 263-276.
36. Fardim, P., Holmbom, B., Ivaska, A., Karhu, J., Mortha, G., & Laine, J. (2002). Critical comparison and validation of methods for determination of anionic groups in pulp fibres. Nordic Pulp & Paper Research Journal, 17(3), 346-351.
37. Fernando, D., Muhić, D., Engstrand, P., & Daniel, G. (2011). Fundamental understanding of pulp property development under different thermomechanical pulp refining conditions as observed by a new Simons' staining method and SEM observation of the ultrastructure of fibre surfaces. Holzforschung, 65(6), 777-786.
38. Ferreira, P. J., Matos, S., & Figueiredo, M. M. (1999). Size characterization of fibres and fines in hardwood kraft pulps. Particle & Particle Systems Characterization, 16(1), 20-24.
39. Forsström, J., Torgnysdotter, A., & Wa˚gberg, L. (2005). Influence of fibre/fibre joint strength and fibre flexibility on the strength of papers from unbleached kraft fibres. Nordic Pulp & Paper Research Journal, 20(2), 186-191.
40. Freire, C. S. R., Silvestre, A. J. D., Pascoal Neto, C., Gandini, A., Fardim, P., & Holmbom, B. (2006). Surface characterization by XPS, contact angle measurements and ToFSIMS of cellulose fibers partially esterified with fatty acids. Journal of Colloid and Interface Science, 301(1), 205-209.
41. Gao, Y., Huang, F., Rajbhandari, V., Li, K., & Zhou, Y. (2009). Effect of separate refining and co-refining of bctmp/kp on paper properties. Pulp and Paper Canada, 110(6), 28-33.
42. Garcia, O., Torres, A., Colom, J., Pastor, F., Diaz, P., & Vidal, T. (2002). Effect of cellulaseassisted refining on the properties of dried and never-dried eucalyptus pulp. Cellulose, 9(2), 115-125.
43. Gärd, J. (2002). The influence of fibre curl on the shrinkage and strength properties of paper (Vol. Master thesis). Lulea˚, Sweden: University of Technology.
44. Genco, J. M. (1999). Fundamental processes in stock preparation and refining. Tappi Pulping Conference (pp. 57-96).
45. González, I., Alcalá, M., Arbat, G., Vilaseca, F., & Mutjè, P. (2013). Suitability of rapeseed chemithermomechanical pulp as raw material in papermaking. BioResources, 8(2).
46. González, I., Boufi, S., Pèlach, M. A., Alcalà, M., Vilaseca, F., & Mutjé, P. (2012). Nanofibrillated cellulose as paper additive in eucalyptus pulps. BioResources, 7(4), 5167-5180.
47. Goulet, M. T. (1989). The effect of pulping, bleaching, and refining operations on the electrokinetic properties of wood fiber fines.
48. Grignon, J., & Scallan, A. (1980). Effect of pH and neutral salts upon the swelling of cellulose gels. Journal of Applied Polymer Science, 25(12), 2829-2843.
49. Gulsoy, S. K., & Tufek, S. (2013). Effect of chip mixing ratio of Pinus pinaster and Populus tremula on kraft pulp and paper properties. Industrial & Engineering Chemistry Research, 52(6), 2304-2308.
50. Haavisto, S., Koskenhely, K., & Paulapuro, H. (2008). Effect of fiber flocculation and filling design on refiner loadability and refining characteristics. BioResources, 3(2), 403-424.
51. Hartler, N. (1995). Aspects on curled and microcompressed fibres. Nordic Pulp and Paper Research Journal, 10(1).
52. Hartman, R. R. (1984). Mechanical treatment of pulp fibers for property development (Vol. Doctor of philosophy). Appleton, Wisconsin: Institute of Paper Chemistry, Lawrence University.
53. Helmerius, J., von Walter, J. V., Rova, U., Berglund, K. A., & Hodge, D. B. (2010). Impact of hemicellulose pre-extraction for bioconversion on birch Kraft pulp properties. Bioresource Technology, 101(15), 5996-6005.
54. Herrington, T. M., & Petzold, J. C. (1992). An investigation into the nature of charge on the surface of papermaking woodpulps 1. Charge/pH isotherms. Colloids and Surfaces, 64(2), 97-108.
55. Heymer, J. O. (2009). Measurement of heterogeneity in low consistency pulp refining by comminution modeling (Vol. Ph.D. thesis). Vancouver, BC, Canada: University of British Columbia.
56. Heymer, J. O., Olson, J. A., & Kerekes, R. J. (2011). The role of multiple loading cycles on pulp in refiners. Nordic Pulp & Paper Research Journal, 26(3), 283-287.
57. Hojjatie, B., & Coffin, D. (1998). On-line freeness sensors used in manufacturing of paper products.
58. Horvath, A. E. (2006). The effects of cellulosic fiber charges on polyelectrolyte adsorption and fiber-fiber interactions (Vol. Doctoral of philosophy). Stockholm, Sweden: Department of Fibre and Polymer Technology, Royal Institute of Technology.
59. Horvath, A. E., & Lindstrom, T. (2007). Indirect polyelectrolyte titration of cellulosic fibers-surface and bulk charges of cellulosic fibers. Nordic Pulp and Paper Research Journal, 22(1), 87.
60. Hubbe, M. A., & Chen, J. (2004). Charge-related measurements-A reappraisal Part 1. Streaming current. Paper Technology, 45(8), 17-23.
61. Hubbe, M. A., & Heitmann, J. A. (2007). Review of factors affecting the release of water from cellulosic fibers during paper manufacture. BioResources, 2(3), 500-533.
62. Hubbe, M. A., Venditti, R. A., & Rojas, O. J. (2007). What happens to cellulosic fibers during papermaking and recycling? A review. BioResources, 2(4), 739-788.
63. Huhtanen, J. P., & Partanen, M. (2013). Mill experience with Metso's new low consistency refining concept OptiFiner Pro. PaperCon. Tappi.
64. Ibrahem, A., Yousef, M., & El-Meadawy, S. (1989). Effect of beating on fiber crystallinity and physical properties of paper sheets. Journal of Islamic Academy of Sciences, 2(4), 295-298.
65. Ingmanson, W., & Thode, E. (1959). Factors contributing to the strength of a sheet of paper II. Relative bonded area. Tappi, 42(1), 83-93.
66. Jones, B. W., Venditti, R., Park, S., Jameel, H., & Koo, B. (2013). Enhancement in enzymatic hydrolysis by mechanical refining for pretreated hardwood lignocellulosics. Bioresource Technology, 147, 353-360.
67. Joutsimo, O. (2004). Effect of mechanical treatment on softwood kraft fiber properties. Finland: Helsinki University of Technology.
68. Kang, T. (2007). Role of external fibrillation in pulp and paper properties. Finland: Helsinki University of Technology.
69. Kang, T. A. P. H. (2006a). Effect of external fibrillation on paper strength. Pulp & Paper Canada, 107, 51-54.
70. Kang, T. A. P. H. (2006b). New mechanical treatment for chemical pulp. Proceedings of the Institution of Mechanical Engineers. Part E: Journal of Process Mechanical Engineering, 220(3), 161-166.
71. Karande, V., Bharimalla, A., Hadge, G., Mhaske, S., & Vigneshwaran, N. (2011). Nanofibrillation of cotton fibers by disc refiner and its characterization. Fibers and Polymers, 12(3), 399-404.
72. Karlström, A., Eriksson, K., Sikter, D., & Gustavsson, M. (2008). Refining models for control purposes. Nordic Pulp and Paper Research Journal, 23(1), 129-138.
73. Kerekes, R. (1990). Characterization of pulp refiners by a C-factor. Nordic Pulp and Paper Research Journal, 5.
74. Kerekes, R. (2010). Energy and forces in refining. Journal of Pulp and Paper Science, 36(1), 10.
75. Kerekes, R., & Senger, J. (2006). Characterizing refining action in low consistency refiners by forces on fibres. Journal of Pulp and Paper Science, 32(1).
76. Kerekes, R. J. (2011). Force-based characterization of refining intensity. Nordic Pulp and Paper Research Journal, 26(1), 14.
77. Kerekes, R. J., & Olson, J. A. (2003). Perspectives on fibre length reduction in refining. Proceedings of 7th PIRA international refining conference & exhibition. Stockholm, Sweden.
78. Kerekes, R. J., Soszynski, R. M., & Doo, P. A. T. (2005). Characterizing refining action in PFI mills. Tappi Journal, 4(3), 9-13.
79. Kočar, D., Pedersoli, L., Jr., Strlič, M., Kolar, J., Rychlý, J., & Matisová-Rychlá, L. (2004). Chemiluminescence from paper: II. The effect of sample crystallinity, morphology and size. Polymer Degradation and Stability, 86(2), 269-274.
80. Kongdee, A., Bechtold, T., Burtscher, E., & Scheinecker, M. (2004). The influence of wet/dry treatment on pore structure-The correlation of pore parameters, water retention and moisture regain values. Carbohydrate Polymers, 57(1), 39-44.
81. LAnson, S., Karademir, A., & Sampson, W. (2006). Specific contact area and the tensile strength of paper. Appita Journal, 59(4), 297.
82. Laine, J., Buchert, J., Viikari, L., & Stenius, P. (1996). Characterization of unbleached kraft pulps by enzymatic treatment, potentiometric titration and polyelectrolyte adsorption. Holzforschung-International Journal of the Biology, Chemistry, Physics and Technology of Wood, 50(3), 208-214.
83. Laivins, G., & Scallan, A. (1996). Journal of Pulp and Paper Science, 22(5), J178-J184.
84. Lammi, T., & Heikkurinen, A. (1997). Changes in fibre wall structure during defibration. Fundamentals of Papermaking Materials Trans., 11th fundamental research symposium (pp. 641-662).
85. Leitner, J., Seyfriedsberger, G., & Kandelbauer, A. (2013). Modifications in the bulk and the surface of unbleached lignocellulosic fibers induced by a heat treatment without water removal: Effects on fibre relaxation of PFI-beaten kraft fibers. European Journal of Wood and Wood Products, 71(6), 725-738.
86. Lewis, J., & Danforth, D. (1962). Stock preparation analysis. Tappi Journal, 45(13), 185-188.
87. Lian, H.-L., You, J.-X., Huang, Y.-N., & Li, Z.-Z. (2012). Effect of refining on delignification with a laccase/xylanase treatment. BioResources, 7(4).
88. Lindström, T. (1989). Some fundamental chemical aspects on paper forming. Fundamentals of Papermaking, 1, 309-412.
89. Liu, N., Qin, M., Gao, Y., Li, Z., Fu, Y., & Xu, Q. (2012). Pulp properties and fiber characteristics of xylanase-treated aspen apmp. BioResources, 7(3).
90. Liu, R., Yu, H., & Huang, Y. (2005). Structure and morphology of cellulose in wheat straw. Cellulose, 12(1), 25-34.
91. Loijas, M. (2010). Factors affecting the axial force in low-consistency refining. Tampere, Finland: Tampere University of Applied Science, Paper Technology, Valkeakoski Service Center.
92. Lumiainen, J. (1990). New theory can improve practice. Pulp and Paper International, 32(7), 46-54.
93. Lumiainen, J. (2000). Refining of chemical pulp. Papermaking Part, 1, 86-122.
94. Luukko, K., & Maloney, T. C. (1999). Swelling of mechanical pulp fines. Cellulose, 6(2), 123-136.
95. Luukko, K., & Paulapuro, H. (1999). Development of fines quality in the TMP process. Journal of Pulp and Paper Science, 25(8), 273-277.
96. Luukkonen, A. (2011). Development of a methodology to optimize low consistency refining of mechanical pulp. Vancouver: University of British Columbia.
97. Lyytikäinen, K., Saukkonen, E., Kajanto, I., & Kayhko, J. (2010). The effect of hemicellulose extraction on fiber charge properties and retention behavior of kraft pulp fibers. BioResources, 6(1), 219-231.
98. Maloney, T., & Paulapuro, H. (1999). The formation of pores in the cell wall. Journal of Pulp and Paper Science, 25(12), 430-436.
99. Martinez, D. M., & Kerekes, R. J. (1994). Forces on fibers in low-consistency refining. Tappi Journal, 77.
100. Meier, H. (1962). Chemical and morphological aspects of the fine structure of wood. Pure and Applied Chemistry, 5, 37-52.
101. Miles, K., & Karnis, A. (1991). The response of mechanical and chemical pulps to refining. Tappi Journal, 74(1), 157-164.
102. Miyanishi, T. (1995). On-line zeta potential analyses of a fine paper machine and a newsprint paper machine. Tappi Journal, 78.
103. Mohlin, U.-B., Dahlbom, J., & Hornatowska, J. (1996). Fiber deformation and sheet strength. Tappi Journal, 79.
104. Mohlin, U., Miller, J., Mohlin, U., & Miller, J. (1995). Industrial refining-effects of refining conditions on fibre properties. Proceedings of the 3rd international refining conference (Vol. 4, pp. 19-22).
105. Mohlin, U. B. (2002). Industrial refining of unbleached kraft pulps-The effect of pH and refining intensity. Sweden: STFI AB, Swedish Pulp and Paper Research Institute.
106. Mohlin, U. B., & Alfredson, C. (1990). Fiber deformation and its implications in pulp characterization. Nordic Pulp and Paper Research Journal, 5(6), 105-111.
107. Molin, U., & Daniel, G. (2004). Effects of refining on the fibre structure of kraft pulps as revealed by FE-SEM and TEM: Influence of alkaline degradation. Holzforschung, 58(3), 226-232.
108. Molter, M. (2011). Reduced energy costs through closed loop refiner control. In PaperCon 2011 Northern Kentucky Convention Center.
109. Mossello, A. A., Harun, J., Shamsi, S. R. F., Resalati, H., Tahir, P. M., Ibrahim, R., et al. (2010). A review of literatures related to kenaf as a alternative for pulpwoods. Agricultural Journal, 5(3), 131-138.
110. Mou, H.-Y., Li, B., Heikkilä, E., Iamazaki, E., Zhan, H.-y., & Fardim, P. (2013). Low consistency refining of eucalyptus pulp: effects on surface chemistry and interaction with FWAs. BioResources, 8(4), 5995-6013.
111. Mou, H., Iamazaki, E., Zhan, H., Orblin, E., & Fardim, P. (2013). Advanced studies on the topochemistry of softwood fibres in low-consistency refining as analyzed by FE-SEM, XPS, and ToF-SIMS. BioResources, 8.(2).
112. Mutjé, P., Pèlach, M. A., García, J. C., Presta, S., Vilaseca, F., & Jimenez, L. (2006). Comparison of cationic demand between olive wood organosolv pulp and eucalyptus kraft pulp. Process Biochemistry, 41(7), 1602-1607.
113. Mutjé, P., Pèlach, M. A., Vilaseca, F., García, J. C., & Jiménez, L. (2005). A comparative study of the effect of refining on organosolv pulp from olive trimmings and kraft pulp from eucalyptus wood. Bioresource Technology, 96(10), 1125-1129.
114. Nakagaito, A., & Yano, H. (2004). The effect of morphological changes from pulp fiber towards nano-scale fibrillated cellulose on the mechanical properties of high-strength plant fiber based composites. Applied Physics A, 78(4), 547-552.
115. Nugroho, D. D. P. (2012). Low consistency refining of mixtures of softwood & hardwood bleached kraft: Effects of refining power. Thailand: Asian Institute of Technology.
116. Oksanen, T., Pere, J., Buchert, J., & Viikari, L. (1997). The effect of Trichoderma reesei cellulases and hemicellulases on the paper technical properties of never-dried bleached kraft pulp. Cellulose, 4(4), 329-339.
117. Olejnik, K. (2013). Impact of pulp consistency on refining process conducted under constant intensity determined by SEL and SEC factors. BioResources, 8(3).
118. Optest. (2005). Intelligent drainage analyzer manual. OP Test equipment Inc. www.optest.com/brochures/Brochure-PIA02.pdf
119. Pääkkö, M., Ankerfors, M., Kosonen, H., Nykänen, A., Ahola, S., Österberg, M., et al. (2007). Enzymatic hydrolysis combined with mechanical shearing and high-pressure homogenization for nanoscale cellulose fibrils and strong gels. Biomacromolecules, 8(6), 1934-1941.
120. Paavilainen, L. (1993). Conformability, flexibility and collapsibility of sulphate pulp fibres. Paperi Ja Puu, 75(9-10), 689-702.
121. Page, D. H. (1985). The mechanism of strength development of dried pulps by beating [fiber kinking, crimping, upgrading]. Svensk Papperstidning, 88.
122. Page, D. H. (1989a). The beating of chemicals pulps-The action and the effects. Papermaking Raw Materials, Transactions of the 9th, fundamental research symposium (pp. 1-37). Cambridge, UK.
123. Page, D. H. S., Jordan, R. S., & Barbe, B. D. M. C. (1985). Curl, crimps, kinks and microcompressions in pulp fibers-Their origin, measurements and significance. Paper making rawmaterials: Their interaction with the production process and their effect on paper properties. In Transactions of the 8th fundamental research symposium, vol. 1 (pp. 183-227). Oxford, Punton, London: Mechanical Engineering Publications Limited.
124. Paradis, M. A., Genco, J. M., Bousfield, D. W., Hassler, J. C., & Wildfong, V. (2002). Determination of drainage resistance coefficients under conditions of known shear rate. Tappi Journal, 1(8), 12-18.
125. Park, S., Venditti, R., Jameel, H., & Pawlak, J. (2006). Hard to remove water in cellulose fibers characterized by high resolution thermogravimetric analysis-Methods development. Cellulose, 13(1), 23-30.
126. Pattara, P. S. (2012). Low consistency refining of chemical pulp, investigating the effect of intensity on fibre cutting. Pathumthani, Thailand: Asian Institute of Technology, Pulp and Paper Technology (Vol. Master thesis).
127. Peng, F., & Johansson, L. (1996). Characterization of mechanical pulp fibres. Journal of Pulp and Paper Science, 22(7), J252-J257.
128. Penniman, J. G. (1992). Comparison of pulp pad streaming potential measurement and mobility measurement. Tappi Journal, 75(8), 111-115.
129. Petit-Conil, M., Cochaux, A., & De Choudens, C. (1994). Mechanical pulp characterization: A new and rapid method to evaluate fibre flexibility. Paperi Ja Puu, 76(10), 657-662.
130. Pokhrel, C. (2010). Determination of strength properties of pine and its comparison with birch and eucalyptus.
131. Polan, M. (1993). Effects of refining on the flocculation of chemical pulp suspensions. Institute of Papermaking, Darmstadt, Germany and Pulp and Paper Centre, The University of British Columbia.
132. Proulx, R. (2000). On-Line Drainage Rate Control Improve Refiner Operations. Roc. Int. Conf. Pulp. (p. 10).
133. Pulkkinen, I. (2010). From eucalypt fiber distributions to technical properties of paper.
134. Rajabi Nasab, N. (2013). Understanding of no-load power in low consistency refining.
135. Ramezani, O., & Nazhad, M. M. (2005). The effect of refining on paper formation. Tappsa Journal, Archive, 2.
136. Rebouillat, S., & Pla, F. (2013). State of the art manufacturing and engineering of nanocellulose: A review of available data and industrial applications. Journal of Biomaterials and Nanobiotechnology, 4, 165-188.
137. Rene, E., Ulrich, H., & Wolfgang, B. (2006). A method to determine fibre wall damage induced by refining. Graz, Austria: Pulp and Fibre Technology Graz University of Technology, Institute for Paper.
138. Richter, V., Orlandini, S., Caobianco, S., Scognamiglio, C., Lopopolo, S., Grossi, B., et al. (1996). Non-wood plant pulps. Morphology and papermaking properties. Fourth European workshop on lignocellulosics and pulp (pp. 366-373).
139. Rosli, W. D. W., Mazlan, I., & Law, K. N. (2011). Effect of lignin on Acacia mangium kraft pulp refining behaviour. Cellulose Chemistry and Technology, 45(9-10), 643-648.
140. Roux, J.-C., Bloch, J.-F., & Nortier, P. (2007). A kinetic model for pulp refining, including the angular parameters of the equipment. Appita Journal: Journal of the Technical Association of the Australian and New Zealand Pulp and Paper Industry, 60(1), 29.
141. Rushdan, I. (2003). Effect of refining on fibre morphology and drainage of soda pulp derived from oil palm empty fruit bunches. Journal of Tropical Forest Products, 9(1/2), 26-34.
142. Rusu, M., Mörseburg, K., Gregersen Ø., Yamakawa, A., & Liukkonen, S. (2011). Relation between fibre flexibility and cross sectional properties. BioResources, 6(1), 641-655.
143. Sarrazin, P., Beneventi, D., Chaussy, D., Vurth, L., & Stephan, O. (2009). Adsorption of cationic photoluminescent nanoparticles on softwood cellulose fibres: Effects of particles stabilization and fibres' beating. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 334(1-3), 80-86.
144. Seth, R. (2006). The importance of fibre straightness for pulp strength. Pulp and Paper Canada, Ontario, 107(1), 34.
145. Seth, R., & Page, D. (1988). Fiber properties and tearing resistance. Tappi Journal, 71(2), 103-107.
146. Seth, R. S. (1999). Beating and refining response of some reinforcement pulps. Tappi Journal, 82(3), 147-155.
147. Shafiei Sabet, S. (2013). Shear rheology of cellulose nanocrystal (CNC) aqueous suspensions.
148. Singh, S., Dutt, D., & Tyagi, C. (2010). Complete characterization of wheat straw (triticum aestivum pbw-343 l. Emend. Fiori & paol.)-a renewable source of fibres for pulp and paper making. BioResources, 6(1), 154-177.
149. Siró, I., & Plackett, D. (2010). Microfibrillated cellulose and new nanocomposite materials: A review. Cellulose, 17(3), 459-494.
150. Sixta, H. (2008). Handbook of Pul. Weinheim: Wiley-VCH Verlag GmbH.
151. Sjöberg, J., & Höglund, H. (2007). High consistency refining of kraft pulp for reinforcing paper based on TMP furnishes. International mechanical pulping conference. Minneapolis, Minnesota, USA.
152. Sjöström, E. (1993). Wood chemistry: Fundamentals and applications. Academic Press.
153. Smook, G. A. (1992). Handbook for pulp & paper technologists. In 1992. Vancouver: Angus Wilde Publications.
154. Stelte, W., & Sanadi, A. R. (2009). Preparation and characterization of cellulose nanofibers from two commercial hardwood and softwood pulps. Industrial & Engineering Chemistry Research, 48(24), 11211-11219.
155. Stevens, W. (1981). Refiner analysis offers improved system efficiency, horsepower usage. Pulp and Paper, 55(3), 64-67.
156. Stoere, P., Nazhad, M., & Kerekes, R. J. (2001). An experimental study of the effect of refining on paper formation. Tappi Journal, 84(7).
157. Stone, J., & Scallan, A. (1968). A structural model for the cell wall of water-swollen wood pulp fibres based on their accessibility to macromolecules. Cellulose Chemistry and Technology, 2, 343-358.
158. Stratton, R., & Swanson, J. (1981). Electrokinetics in papermaking. A position paper. Tappi Journal, 64(1), 79.
159. Sutton, P., Joss, C., & Crossely, B. (2000). Factors affecting fiber characteristics in pulp. 2000 pulping/process & product quality conference: TAPPI.
160. TAPPI. (1999). T 227 om-99, Freeness of pulp (Canadian standard method).
161. Technology, F. r. (2001). Introduction to stock prep refining. 〈www.fibrelabflubc.ca/.les/2012/07/FINEbar-Training Manual.pdf〉.
162. Thomas, L. H., Forsyth, V. T., Šturcová, A., Kennedy, C. J., May, R. P., Altaner, C. M., et al. (2013). Structure of cellulose microfibrils in primary cell walls from collenchyma. Plant Physiology, 161(1), 465-476.
163. Thygesen, A., Oddershede, J., Lilholt, H., Thomsen, A. B., & Sta˚hl, K. (2005). On the determination of crystallinity and cellulose content in plant fibres. Cellulose, 12(6), 563-576.
164. Tonoli, G., Teixeira, E., Corrêa, A., Marconcini, J., Caixeta, L., Pereira-da-Silva, M., et al. (2012). Cellulose micro/nanofibres from eucalyptus kraft pulp: Preparation and properties. Carbohydrate Polymers, 89(1), 80-88.
165. Tschirner, U., Ramaswamy, S., & Goel, A. (2002). Effect of cereal straw fiber addition to papermaking furnish. In Annual meeting-pulp and paper technical association of Canada Vol. 88, pp. A301-A304), Pulp and Paper Technical Association of Canada, 1999.
166. Tschirner, U. W., Barsness, J., & Keeler, T. (2007). Recycling of chemical pulp from wheat straw and corn stover. BioResources, 2(4), 536-543.
167. Usta, M., Kirci, H., & Eroglu, H. (1990). Soda oxygen pulping of cornstaks (zea mays indurata sturt.). In Pulping conference proceedings: TAPPI.
168. Wai, N., Nanko, H., & Murakami, K. (1985). A morphological study on the behavior of bamboo pulp fibers in the beating process. Wood Science and Technology, 19(3), 211-222.
169. Wan, J., Yang, J., Ma, Y., & Wang, Y. (2011). Effects of the pulp preparation and papermaking processes on the properties of OCC fibers. BioResources, 6(2), 1615-1630.
170. Wathén, R. (2006). Studies on fiber strength and its effect on paper properties.
171. Wistara, N., & Young, R. (1999). Properties and treatments of pulps from recycled paper Part I. Physical and chemical properties of pulps. Cellulose, 6(4), 291-324.
172. Yasumura, P. K., DAlmeida, M. L. O., & Park, S. W. (2012). Multivariate statistical evaluation of physical properties of pulps refined in a PFI mill. O Papel, 73(3), 59-65.
173. Yuan, L., Wan, J., Ma, Y., Wang, Y., Huang, M., & Chen, Y. (2013). The content of different hydrogen bond models and crystal structure of eucalyptus fibers during beating. BioResources, 8(1).
174. Zeng, X., Retulainen, E., Heinemann, S., & Fu, S. (2012). Fibre deformations induced by different mechanical treatments and their effect on Zero-Span Strength. Nordic Pulp and Paper Research Journal, 27(2), 335.
175. Zhang, Y., Sjögren, B., Engstrand, P., & Htun, M. (1994). Determination of charged groups in mechanical pulp fibres and their influence on pulp properties. Journal of Wood Chemistry and Technology, 14(1), 83-102.