Energy storage systems sizing study for a high-altitude wind energy application

Energy

Volumn 76, Issue , 2014, Pages 91-103

  Pavkovic D ^a   Hoic M ^a   Deur, J ^a   Petric J ^a  

^a UNIVERSITY OF ZAGREB   (Croatia)

Author keywords

Batteries; Energy storage systems sizing; Flywheels; High altitude wind energy; Hydropneumatic accumulators; Ultracapacitors

Indexed keywords

COMPRESSED AIR; ELECTRIC POWER SYSTEMS; ELECTRIC POWER TRANSMISSION NETWORKS; ENERGY STORAGE; FLYWHEELS; LAND VEHICLE PROPULSION; ROTORS; SOLAR CELLS; SUPERCAPACITOR; TURBOMACHINE BLADES; WHEELS; WIND POWER; WIND TURBINES;

ENERGY APPLICATIONS; ENERGY STORAGE SYSTEMS; HIGH ALTITUDE WINDS; HYDROPNEUMATIC ACCUMULATORS; NEAR-SURFACE WINDS; PRACTICAL GUIDELINES; ULTRACAPACITORS; WIND TURBINE SYSTEMS;

INVESTMENTS;

ALTITUDE; GUIDELINE; PERFORMANCE ASSESSMENT; POWER GENERATION; STEADY-STATE EQUILIBRIUM; WIND POWER; WIND TURBINE;

EID: 84908555101     PISSN: 03605442     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.energy.2014.04.001     Document Type: Article

References (71)

1. Loyd M.L. Crosswind kite power. JEnergy 1980, 4(3):106-111.
2. Ban M., Perković L., Duić N., Penedo R. Estimating the spatial distribution of high altitude wind energy potential in Southeast Europe. Energy 2013, 57:24-29.
3. Canale M., Fagiano L., Milanese M. KiteGen: a revolution in wind energy generation. Energy 2009, 34(3):355-361.
4. Fagiano L., Milanese M., Piga D. High-altitude wind power generation. IEEE Trans Energy Convers 2010, 25(1):168-180.
5. Lansdorp B., Ockels W.J. The laddermill - innovative wind energy from high altitudes in Holland and Australia. Global Windpower '06 Conference & Exhibition, Adelaide, Australia September, 2006.
6. Pardal T, Freire MA. Atmospheric Resources Explorer. European Patent No. 2021625-B1, 2011.
7. Pardal T., Fernandes R., Silva P. Omnidea's system for airborne wind energy. Airborne Wind Energy Conference 2011, Leuven, Belgium May 2011.
8. Goldstein L. Theoretical analysis of an airborne wind energy conversion system with a ground generator and fast motion transfer. Energy 2013, 55:987-995.
9. Perković L., Silva P., Ban M., Duić N. Harvesting high altitude wind energy for energy production: a feasibility study of Magnus' Effect Concept. Proceedings of 6th Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems (SDEWES 2011), Dubrovnik, Croatia September 2011.
10. Kim J., Park C. Wind power generation with a parawing on ships, a proposal. Energy 2010, 35(3):1425-1432.
11. Díaz-González F., Sumper A., Gomis-Bellmunt O., Bianchi F.D. Energy management of flywheel-based energy storage device for wind power smoothing. Appl Energy 2013, 110:207-2019.
12. Ibrahim H., Younès R., Ilinca A., Dimitrova M., Perron J. Study and design of hybrid wind-diesel-compressed air energy storage system for remote areas. Appl Energy 2010, 87(5):1749-1762.
13. Puddu P., Paderi M. Hydropneumatic accumulators for vehicles kinetic energy storage: influence of gas compressibility and thermal losses on storage capability. Energy 2013, 57:326-335.
14. Kaldellis J.K. Optimum autonomous wind-power system sizing for remote consumers, using long-term wind speed data". Appl Energy 2002, 71(3):215-233.
15. Li C., Ge X., Zheng Y., Xu C., Ren Y., Song C., et al. Techno-economic feasibility study of autonomous hybrid wind/PV/battery power system for a household in Urumqi, China. Energy 2013, 55:263-272.
16. Jayasinghe S.D.G., Vilathgamuwa D.M. Flying supercapacitors as power smoothing elements in wind generation. IEEE Trans Ind Electron 2013, 60(7):2909-2918.
17. Abbey C., Joos G. Supercapacitor energy storage for wind energy applications. IEEE Trans Ind Appl 2007, 43(3):769-776.
18. Musolino V., Pievatolo A., Tironi W. Astatistical approach to electrical storage sizing with application to the recovery of braking energy. Energy 2011, 36(11):6697-6704.
19. Zhang X., Tan S.C., Li G., Li J., Peng Z. Components sizing of hybrid energy systems via the optimization of power dispatch simulations. Energy 2013, 52:165-172.
20. Baroudi J.A., Dinavahi V., Knight A.M. Areview of power converter topologies for wind generators. Renew Energy 2007, 32(14):2369-2385.
21. Ibrahim H., Ilinca A., Perron J. Energy storage systems - characteristics and comparisons. Renew Sustain Energy Syst 2008, 12(5):1221-1250.
22. Ruddell A. Storage Technology Report: WP-ST6 Flywheel. INVESTIRE Network, 2003.
23. Gyuk I.P. Handbook of energy storage for transmission and distribution applications 2003, Electric Power Research Institute (EPRI).
24. Collins J.A., Busby H., Staab G. Mechanical design of machine elements and machines, a failure prevention perspective 2010, John Wiley & Sons. 2nd ed.
25. Okou R., Sebitosi A.B., Pillay P. Flywheel rotor manufacture for rural Energy storage in sub-Saharan Africa. Energy 2011, 36(10):6138-6145.
26. Lemofouet S. Investigation and Optimisation of Hybrid Electricity Storage Systems Based on Compressed Air and Supercapacitors 2006, Ph.D. thesis, Ecole Polytechnique Federale de Lausanne.
27. Vadasz P. Compressed air energy storage: optimal performance and techno-economical indices. Int J Appl Thermodyn 1999, 2(2):69-80.
28. Salgi G., Lund H. System behaviour of compressed-air energy-storage in Denmark with a high penetration of renewable energy sources. Appl Energy 2008, 85(4):182-189. pp.
29. Van de Ven J.D. Constant pressure hydraulic energy storage through a variable area piston hydraulic accumulator. Appl Energy 2013, 105:262-270.
30. Drexler P., et al. The hydraulic trainer. Planning and design of hydraulic power systems 1988, vol. 3. Mannesmann Rexroth GmbH.
31. Pourmovahead A., Otis D.R. Effects of thermal damping on the dynamics response of a hydraulic motor-accumulator system. JDyn Syst Meas Control 1984, 106(1):21-26.
32. Ehsani M., Gao Y., Gay S.E., Emadi A. Modern electric, hybrid electric and fuel cell vehicles 2010, CRC Press. 2nd ed.
33. Vazquez S., Lukic S.M., Galvan E., Franquelo L.G., Carrasco J.M. Energy storage systems for transport and grid applications. IEEE Trans Ind Electron 2010, 57(12).
34. Pistoia G. Battery-operated devices and systems: from portable electronics to industrial products 2008, Elsevier Science.
35. Burke A.F. Batteries and ultracapacitors for electric, hybrid and fuel cell vehicles. Proc IEEE 2007, 95(4):806-820.
36. Divya K.C., Østergaard J. Battery energy storage technology for power systems - an overview. Electr Power Syst Res 2009, 79(4):511-520.
37. Kupperman A., Aharon I. Battery-ultracapacitor hybrids for pulsed current loads: a review. Renew Sustain Energy Rev 2011, 15(2):981-992.
38. Dixon J., Nakashima I., Arcos E.F., Ortúzar M. Electric vehicle using a combination of ultracapacitors and ZEBRA battery. IEEE Trans Ind Electron 2010, 57(3):943-949.
39. Hunt G., Szymborsky J. Achievements of an ABSOLYTE valve-regulated lead-acid battery operating in a utility Battery Energy Storage System (BESS) for 12 years. EESAT 2009 Biennial International Conference, Seattle, WA 2009.
40. Pavković D., Hoić M., Petrić J., Herold Z., Deur J. An overview of energy storage systems considering renewable Energy applications. Proceedings of 6th Dubrovnik Conference on Sustainable development of Energy, Water and Environment Systems September, 2011, Paper No. SDEWES11-0271, Dubrovnik, Croatia.
41. Poonpun P., Jewell W.T. Analysis of the cost per kilowatt hour to store electricity. IEEE Trans Energy Convers 2008, 23(2):529-534.
42. Industrial application of batteries 2007, Elsevier. M. Broussely, G. Pistoia (Eds.).
43. Walawalkar R., Apt J. Market analysis of emerging electric energy storage systems 2008, US Department of Energy/National Energy Technology Laboratory, report No. DOE/NETL-2008/1330.
44. Bito A. Overview of the sodium-sulfur (NAS) battery for the IEEE Stationary Battery Committee. Proc. of 2005 IEEE Power Engineering Society General Meeting 12-16 June, 2005, vol. 2:1232-1235. San Francisco, CA, USA.
45. Dahlen M., Mattera F., Soria M.L., Lailler P., Rouget R. Ni-batteries storage technology report 2003, INVESTIRE Network.
46. Ferreira H.L., Garde R., Fulli G., Kling W., Lopes J.P. Characterisation of electrical energy storage technologies. Energy 2013, 53:288-298.
47. Hartnig C., Krause T. New material concepts for lithium-ion batteries. ATZ Elektronik - Worldwide Edition 2011, 6(3):10-13.
48. Burke A., Miller M. Performance characteristics of lithium-ion batteries of various chemistries for plug-in hybrid vehicles. EVS24 International Battery, Hybrid and Fuel Cell Electric Vehicle Symposium, Stavanger, Norway May 13-16, 2009.
49. Burke A., Miller M. The power capability of ultracapacitors and lithium batteries for electric and hybrid vehicle applications. JPower Sources 2011, 196(1):514-522.
50. Kubiak P., Wolfahrt-Mehrens M., Edström K., Morcrette M. Review on ageing mechanisms of different Li-ion batteries for automotive applications November 2011, FP7 Project HELIOS (High Energy Lithium-Ion Storage Solutions) technical report. http://www.helios-eu.org.
51. Tassin N., Joerissen L., Hubert S., Raadschelders J., Lailler P., Labbé J. REDOX systems storage technology report 2003, INVESTIRE Network.
52. Thaller L.H., Lim H.S. Aprediction model of the depth-of-discharge effect on the cycle life of a storage cell 1987, NASA Technical Memorandum No. 89915.
53. Miller J.M. "Ultracapacitors", Chap. 7 of "Handbook of automotive power electronics and motor drives" 2005, Taylor & Francis Group. A. Emadi (Ed.).
54. Burke A.F. Ultracapacitors: why, how, and where is the technology. JPower Sources 2000, 91(1):37-50.
55. Miller J.M. Energy storage technology, markets and applications, ultracapacitors in combination with lithium-ion 2007, Lecture for IEEE IL Section, Rock River Valley, IL, USA.
56. Emadi A., Ehsani M., Miller J.M. Vehicular electric power systems - land, sea, air, and space vehicles 2004, Marcel Dekker Inc., New York.
57. Miller J.R., Burke A.F. Electrochemical capacitors: challenges and opportunities for real-world applications. Electrochem Society's Interface 2008, 17(1).
58. Lemofouet S., Rufer A. Ahybrid energy storage system based on compressed air and supercapacitors with Maximum Efficiency Point Tracking (MEPT). IEEE Trans Ind Electron August 2006, 53(4).
59. Pesaran A. Factors & conditions for widespread use of ultracapacitors in automotive applications 2007, Advanced Capacitor World Summit, San Diego, CA, USA.
60. Burke A.F. Ultracapacitor technologies and application in hybrid and electric vehicles. Int J Energy Res Special Issue: Electrical Energy Storage for Future Transportation and Renewable Energy 2010, 34(2):133-151.
61. Ter-Gazarian A. Energy storage for power systems" 1994, IEE/Redwood Books, Wilshire, UK.
62. van Bracht D., Ehret C., Kliffken M.G. Calculable economy: hydraulic hybrid drivetrain in field trial. 2nd Symposium of the VDMA and the University of Karlsruhe, Karlsruhe, Germany 2009.
63. Lai X., Guan C. Aparameter matching method of the parallel hydraulic hybrid excavator optimized with genetic algorithm. Mathematical Problems in Engineering 2013, vol. 2013. Article ID 765027 (doi:10.1155/2013/765027), p. 6.
64. Amjadi Z., Williamson S.S. Power-electronics-based solutions for plug-in hybrid electric vehicle energy storage and management systems. IEEE Trans Ind Electron 2010, 57(2):608-616.
65. SINAMICS - low voltage engineering manual 2013, Siemens AG, Germany.
66. Rodriguez C., Amaratunga G.A.J. Long-lifetime power inverter for photovoltaic AC modules. IEEE Trans Ind Electron 2008, 55(7):2593-2601.
67. NESSCAP ultracapacitor products - 125V MODULE 2010, Nesscap Co., Ltd. http://www.nesscap.com.
68. Maxwell Technologies Boostcap Ultracapacitors 2010, Maxwell Technologies. http://www.maxwell.com.
69. SAFT nickel capacitor engine cranking modules 2010, SAFT. http://www.saftbatteries.com.
70. Kühne R. Electric buses - an energy efficient urban transportation means. Energy 2010, 35(12):4510-4513.
71. Teymourfar R., Asaei B., Iman-Eini H., Nejati-Fard R. Stationary super-capacitor energy storage system to save regenerative braking energy in a metro line. Energy Convers Manag 2012, 56:206-214.