Effects of fabric parameters on the tensile behaviour of sustainable cementitious composites

Composites Part B: Engineering

Volumn 69, Issue , 2015, Pages 256-266

  Cevallos, O A ^a,b   Olivito, R S ^a  

^a UNIVERSITY OF CALABRIA   (Italy)

^b UNIVERSIDAD NACIONAL DE CHIMBORAZO   (Ecuador)

Author keywords

A. Fabrics textiles; B. Mechanical properties; D. Mechanical testing

Indexed keywords

ANCHORAGES (FOUNDATIONS); CEMENTS; FLAX; GEOMETRY; GLASS; LIME; LINEN; MECHANICAL PROPERTIES; MECHANICAL TESTING; STRAIN; VOLUME FRACTION; YARN;

CEMENT BASED COMPOSITES; CEMENTITIOUS COMPOSITES; FABRIC PARAMETERS; FABRIC-REINFORCED COMPOSITES; FABRICS/TEXTILES; MECHANICAL BEHAVIOUR; PHYSICAL AND MECHANICAL PROPERTIES; TENSILE STRESS STRAIN;

REINFORCEMENT;

EID: 84908430581     PISSN: 13598368     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compositesb.2014.10.004     Document Type: Article

References (42)

1. Brandt A. Fibre reinforced cement-based (FRC) composites after over 40 years of development in building and civil engineering. Compos Struct 2008;86:3-9.
2. Dittenber DB, GangaRao HVS. Critical review of recent publications on use of natural composites in infrastructure. Compos Part A: Appl Sci Manuf 2012;43:1419-29.
3. Murali Mohan Rao K, Mohana Rao K, Ratna Prasad AV. Fabrication and testing of natural fibre composites: vakka, sisal, bamboo and banana. Mater Des 2010;31:508-13.
4. Pickering KL. Properties and performance of natural-fibre composites. Woodhead Publishing Limited; 2008.
5. Yao J, Teng JG, Chen JF. Experimental study on FRP-to-concrete bonded joints. Compos Part B: Eng 2005;36(2):99-113.
6. Hollaway LC. A review of the present and future utilisation of FRP composites in the civil infrastructure with reference to their important in-service properties. Constr Build Mater 2010;24:2419-45.
7. Caporale A, Feo L, Luciano R, Penna R. Numerical collapse load of multi-span masonry arch structures with FRP reinforcement. Compos Part B 2013;54:71-84.
8. Papanicolaou CG, Triantafillou TC, Papathanasiou M, Karlos K. Textile reinforced mortar (TRM) versus FRP as strengthening material of URM walls: out-of-plane cyclic loading. Mater Struct 2007;41:143-57.
9. O'Brien TK. Towards a damage tolerance philosophy for composite materials and structures. In: Garbo SP, editor. Composite materials: testing and design 9th volume, ASTM STP 1059. Philadelphia: American Society for Testing Materials; 1990.
10. Hollaway LC. Advanced polymer composites. In: Hollaway LC, Chen JF, Forde M, editors. ICE manual of construction material. London: Thomas Telford; 2009.
11. Olivito R, Cevallos O, Carrozzini A. Development of durable cementitious composites using sisal and flax fabrics for reinforcement of masonry structures. Mater Des 2014;57:258-68.
12. Papanicolaou CG, Triantafillou TC, Karlos K, Papathanasiou M. Textile-reinforced mortar (TRM) versus FRP as strengthening material of URM walls: in-plane cyclic loading. Mater Struct, RILEM 2007;40(10):1081-97.
13. Ku H et al. A review on the tensile properties of natural fiber reinforced polymer composites. Compos Part B: Eng 2011;42(4):856-73.
14. Faruk O, Bledzki AK, Fink H, Sain M. Biocomposites reinforced with natural fibers: 2000-2010. Prog Polym Sci 2012;37:1552-96.
15. Herrera-Franco PJ, Valadez-González A. A study of the mechanical properties of short natural-fiber reinforced composites. Compos Part B: Eng 2005;36(8):597-608.
16. Yan LB, Chouw N, Jayaraman K. Flax fibre and its composites - a review. Compos Part B 2014;56:296-317.
17. John K, VenkataNaidu S. Effect of fiber content and fiber treatment on flexural properties of sisal fiber/glass fiber hybrid composites. J Reinf Plast Compos 2004;23(15):1601-5.
18. Karam GN. Effect of fiber interaction on strength properties of short fiber reinforced with cement. J Compos Sci Technol Res 1994;16:154-9.
19. Qin C, Soykeabkaew N, Xiuyuan N, Peijs T. The effect of fibre volume fraction and mercerization on the properties of all-cellulose composites. Carbohydr Polym 2008;71(3):458-67.
20. Gassan J. A study of fibre and interface parameters affecting the fatigue behaviour of natural fibre composites. Compos Part A - Appl Sci Manuf 2002;33:369-74.
21. Mobasher B. Mechanics of fibre and textile reinforced cement composites. Boca Raton (Fl): CRC Press, Taylor & Francis Group; 2012.
22. Codispoti R, Oliveira DV, Fangueiro R, Lourenc¸o P, Olivito R. Experimental behavior of natural fiber-based composites used for strengthening masonry structures. Conference papers in materials science. Article ID 539856; 2013.
23. Toledo Filho RD, Scrivener K, England GL, Ghavami K. Durability of alkali sensitive sisal and coconut fibres in cement based composites. Cem Concr Compos 2000;6(22):127-43.
24. Canovas SK. New economical solutions for improvement of durability of portland cement mortars reinforced with sisal fibres. Mater Struct 1992;25:417-22.
25. BS EN 1015-11. Methods of test for mortar for masonry: determination of flexural and compressive strength of hardened mortar. BSI; 2007.
26. BS EN 998/2. Specification for mortar for masonry. Masonry mortar. BSI; 2010.
27. BS EN 1015-1. Methods of test for mortar for masonry - Part 1: Determination of particle size distribution (by sieve analysis). BSI; 1999.
28. BS EN 13395-2. Products and systems for the protection and repair of concrete structures - test methods - determination of workability - Part 2: Test for flow of grout or mortar. BSI; 2002.
29. BS EN 1015-9. Methods of test for mortar for masonry - Part 9: Determination of workable life and correction time of fresh mortar. BSI; 1999.
30. BS EN 1015-18. Methods of test for mortar for masonry - Part 18: Determination of water absorption coefficient due to capillary action of hardened mortar. BSI; 2002.
31. Nicolais L, Meo M, Milella E. Composite materials: a vision for the future. London: Springer; 2011.
32. CNR-DT 200/2013 R1. Istruzioni per la Progettazione, l'Esecuzione ed il Controllo di Interventi di Consolidamento Statico mediante l'utilizzo di Compositi Fibrorinforzati. Commissione di Studio per la Predisposizione e l'Analisi di Norme Tecniche relative alle costruzioni - CNR; 2013.
33. Majumddar AJ, Ryder JF. Glass fibre reinforcement for cement products. Glass Technol 1968;9:78-84.
34. Brameshuber W, editor. State-of-the-art report of RILEM technical committee 201 TRC: textile reinforced concrete (RILEM report 36). Bagneux: RILEM Publications S.A.R.L; 2006.
35. Aveston J, Cooper GA, Kelly A. Single and multiple fracture, the properties of fibre composites. In: Proceedings of the conference national physical laboratories. London: IPC Science and Technology Press Ltd.; 1971. p. 15-26.
36. Hegger J, Will N, Bruckermann O, Voss S. Load-bearing behaviour and simulation of textile reinforced concrete. Mater Struct 2006;39(8):765-76.
37. Larrinaga P, Chastre C, Biscaia HC, San-Jose JT. Experimental and numerical modeling of basalt textile reinforced mortar behavior under uniaxial tensile stress. Mater Des 2014;55:66-74.
38. Aveston J, Kelly A. Theory of multiple fracture of fibrous composites. J Mater Sci 1973;8:411-61.
39. Li VC, Liang E. Fracture processes in concrete and fiber reinforced cementitious composites. J Eng Mech 1986;112(6):566-86.
40. Bentur A, Mindess S. Fibre reinforced cementitious composites. 1st ed. London & New York: Elsevier Applied Science; 1990.
41. Peled A, Bentur A, Yankelevsky D. Effects of woven fabrics geometry on the bonding performance of cementitious composites: mechanical performance. Adv Cem Based Compos 1998;7:20-7.
42. Cohen Z, Peled A, Pasder Y, Roye A, Gries T. Effects of warp knitted fabrics made from multifilament in cement-based composites. In: Hegger J, Brameshuber W, Will N, editors. First international RILEM symposium on textile reinforced concrete. Bagneux: RILEM; 2006. p. 23-32.