Extending Total Site Methodology to Address Varying Energy Supply and Demand

Handbook of Process Integration (PI): Minimisation of Energy and Water Use, Waste and Emissions

Volumn , Issue , 2013, Pages 226-261

  Varbanov, Petar Sabev ^a  

^a UNIVERSITY OF PANNONIA   (Hungary)

Author keywords

Energy Management; Integration of Renewables; Total Site Integration; Varying Energy Demand; Varying Energy Supply

Indexed keywords

ENERGY MANAGEMENT; ENERGY RESOURCES; RENEWABLE ENERGY RESOURCES; WASTE HEAT;

ENERGY DEMANDS; ENERGY SUPPLIES; HEATING AND COOLING; INTEGRATION OF RENEWABLES; PRIMARY ENERGY MIX; PROCESS INTEGRATION; RENEWABLE ENERGY SOURCE; SUPPLY AND DEMAND;

ECONOMICS;

EID: 84908104168     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1533/9780857097255.2.226     Document Type: Chapter

References (37)

1. Atkins M.J., Walmsley M.R.W., Neale J.R. The challenge of integrating non-continuous processes - milk powder plant case study. Journal of Cleaner Production 2010, 18:927-934.
2. Bance P. Residential-scale fuel cell CHP: a better match for domestic loads. Cogeneration & On-Site Power Production 2008, 9(3). accessed on 04/07/2010. http://www.cospp.com/display_article/330132/122/CRTIS/none/none/1/Residential-scale-fuel-cell-CHP-a-better-match-for-domestic-loads.
3. Čuček L., Varbanov P.S., Klemeš J.J., Kravanja Z. Total footprints-based multi-criteria optimisation of regional biomass energy supply chains. Energy 2012, 44(1):135-145. 10.1016/j.energy.2012.01.040.
4. Dhole V.R., Linnhoff B. Total site targets for fuel, co-generation, emissions, and cooling. Computers and Chemical Engineering 1993, 17:S101-S109.
5. Foo D.C.Y., Chew Y.H., Lee C.T. Minimum units targeting and network evolution for batch heat exchanger network. Applied Thermal Engineering 2008, 28(16):2089-2099.
6. Friedler F. Process integration, modelling and optimisation for energy saving and pollution reduction. Chemical Engineering Transactions 2009, 18:1-26.
7. Friedler F. Process integration, modelling and optimisation for energy saving and pollution reduction. Applied Thermal Engineering 2010, 30(16):2270-2280.
8. Gogenko A.L., Anipko O.B., Arsenyeva O.P., Kapustenko P.O. Accounting for fouling in plate heat exchanger design. Chemical Engineering Transactions 2007, 12:207-212.
9. Huggins R.A. Energy Storage 2010, Springer, New York, USA. 10.1007/978-1-4419-1024-0.
10. IEA Variability of wind power and other renewables Management options and strategies 2005, accessed 12/08/2012. http://www.uwig.org/IEA_Report_on_variability.pdf.
11. Kemp I.C. Pinch Analysis and Process Integration. A User Guide on Process Integration for Efficient Use of Energy (authors of the first edition: Linnhoff, B., Townsend, D.W., Boland, D., Hewitt, G. F., Thomas, B. E. A., Guy, A. R., Marsland, R. H. (1982 and 1994). A User Guide on Process Integration for the Efficient Use of Energy., IChemE, Rugby, UK) 2007, Elsevier, Amsterdam, The Netherlands.
12. Kemp I.C., Deakin A.W. The cascade analysis for energy and process integration of batch processes. Part 1: Calculation of energy targets. Chemical Engineering Research and Design 1989, 67:495-509.
13. Kemp I.C., Deakin A.W. The cascade analysis for energy and process integration of batch processes. Part 3: Network design and process scheduling. Chemical Engineering Research and Design 1989, 67:510-516.
14. Kemp I.C., Deakin A.W. The cascade analysis for energy and process integration of batch processes. Part 3: A case study. Chemical Engineering Research and Design 1989, 67:517-525.
15. 2 on total sites. Applied Thermal Engineering 1997, 7:993-1003.
16. Klemeš J., Friedler F., Bulatov I., Varbanov P. Sustainability in the Process Industry: Integration and Optimization 2010, McGraw Hill Companies Inc., New York, USA.
17. Klemeš J., Linnhoff B., Kotjabasakis E., Zhelev T.K., Gremouti I., Kaliventzeff B., Heyen G., Marechal F., Lebon M., Puigjaner L., Espuna A., Graells M., Santos G., Prokopakis G.J., Ashton G.J., Murphy N., Paor, de A.M., Kemp I.C. Design and operation of energy efficient batch processes. Final Report, Commission of the European Communities 1994, Brussels, Belgium.
18. Kondili E., Kaldellis J.K. Optimal design of geothermal-solar greenhouses for the minimisation of fossil fuel consumption. Applied Thermal Engineering 2006, 26(8-9):905-915.
19. Linnhoff B., Hindmarsh E. The pinch design method for heat exchanger networks. Chemical Engineering Science 1983, 38(5):745-763.
20. Linnhoff B., Townsend D.W., Boland D., Hewitt G.F., Thomas B.E.A., Guy A.R., Marsland R.H. A User Guide to Process Integration for the Efficient Use of Energy 1982, IChemE, Rugby, UK.
21. Liew P.Y., Wan Alwi S.R., Varbanov P.S., Manan Z.A., Klemeš J.J. A numerical technique for Total Site sensitivity analysis. Applied Thermal Engineering 2012, 40:397-408.
22. Masruroh N.A., Li B., Klemeš J. Life cycle analysis of a solar thermal system with thermochemical storage process. Renewable Energy 2006, 31(4):537-548.
23. Matsuda K., Hirochi Y., Tatsumi H., Shire T. Applying heat integration total site based pinch technology to a large industrial area in Japan to further improve performance of highly efficient process plants. Energy 2009, 34(10):1687-1692.
24. Nemet A., Klemeš J.J. Optimising the temperature of heat storage to serve processes with varying supply and demand - captured solar energy curve. Chemical Engineering Transactions 2011, 25:605-610. 10.3303/CET1125101.
25. Nemet A., Klemeš J.J., Varbanov P.S., Kravanja Z. Methodology for maximising the use of renewables with variable availability. Energy 2012, 44(1):29-37.
26. Nemet A., Kravanja Z., Klemeš J.J. Integration of solar thermal energy into processes with heat demand. Clean Technologies and Environmental Policy 2012, 14(3):453-463.
27. Perry S., Klemeš J., Bulatov I. Integrating waste and renewable energy to reduce the carbon footprint of locally integrated energy sectors. Energy 2008, 33(10):1489-1497.
28. PRES. (2013). accessed 21/08/2012.
29. PSE A.S.I.A. accessed 21/08/2012. http://www.cheme.utm.my/pseasia2013.
30. Sankey M.H.P.R. The thermal efficiency of steam-engines. Minutes of Proceedings of the Institution of Civil Engineers 1896, 125:182-242. E-ISSN: 1753-7843.
31. Shang Z., Kokossis A. A transhipment model for the optimisation of steam levels of total site utility system for multiperiod operation. Computers and Chemical Engineering 2004, 28(9):1673-1688.
32. Sharma A., Tyagi V.V., Chen C.R., Buddhi D. Review on thermal energy storage with phase change materials and applications. Renewable and Sustainable Energy Reviews 2009, 13:318-345.
33. Varbanov P., Perry S., Klemeš J., Smith R. Synthesis of industrial utility systems: cost-effective de-carbonization. Applied Thermal Engineering 2005, 25(7):985-1001.
34. Varbanov P., Klemeš J. Integration and management of renewables into total sites with variable supply and demand. Computers and Chemical Engineering 2011, 35(9):1815-1826.
35. Von Bremen L. Large-scale variability of weather dependent renewable energy sources. Management of Weather and Climate Risk in the Energy Industry 2010, 189-206. Springer, Dordrecht, The Netherlands, ISBN 97890-481-3690-2. A. Troccoli (Ed.).
36. Wan Alwi S.R., Erniza Mohammad Rozali N.E., Manan Z.A., Klemeš J.J. A process integration targeting method for hybrid power systems. Energy 2012, 44(1):6-10.
37. Weber R., Dorer V. Long-term heat storage with NaOH. Vacuum 2008, 82:708-716.