Solid oxide fuel cells

Sol-Gel Processing for Conventional and Alternative Energy

Volumn , Issue , 2012, Pages 7-36

  Liu, Meilin ^a   Zuo, Chendong ^a   Liu, Mingfei ^a  

^a Georgia Institute of Technology   (United States)

Author keywords

Anode; Cathode; Coatings electrode electrolyte interface; Electrolyte; Gadolinia doped ceria (GDC); ILTSOFC; Lanthanum strontium manganate(LSM); Magnesium doped lanthanum chromate NiO YSZ; Sol gel; Solid oxide fuel cell (SOFC); Surface modification; Yttria stabilized zirconia (YSZ)

Indexed keywords

ANODES; CATALYST ACTIVITY; CATALYTIC OXIDATION; CATHODES; CERAMIC MEMBRANES; CERIUM OXIDE; CHROMATE COATINGS; CHROMATES; COST EFFECTIVENESS; DEGRADATION; ELECTRODES; ELECTROLYTES; FILM PREPARATION; FILMS; LANTHANUM COMPOUNDS; MAGNESIUM COMPOUNDS; MEMBRANES; MICROSTRUCTURE; MORPHOLOGY; NICKEL OXIDE; SOL-GEL PROCESS; SOL-GELS; SOLID OXIDE FUEL CELLS (SOFC); STRONTIUM COMPOUNDS; SURFACE TREATMENT; YTTRIA STABILIZED ZIRCONIA; YTTRIUM OXIDE; ZIRCONIA;

ELECTRODE/ELECTROLYTE INTERFACES; GADOLINIA DOPED CERIA; ILTSOFC; LANTHANUM CHROMATE; LANTHANUM STRONTIUM MANGANATES; YTTRIA-STABILIZED ZIRCONIAS (YSZ);

SOLID ELECTROLYTES;

EID: 84908076448     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1007/978-1-4614-1957-0_2     Document Type: Chapter

References (110)

1. Minh NQ, Takahashi T (1995) Science and technology of ceramic fuel cells. Elsevier, Amsterdam
2. Yang L, Wang SZ, Blinn K, Liu MF, Liu Z, Cheng Z, Liu ML (2009) Enhanced sulfur and coking tolerance of a mixed ion conductor for SOFCs: BaZr0.1Ce0.7Y0.2-xYbxO3-d. Science 326(5949):126-129
3. Yang L, Choi Y, Qin W, Chen H, Blinn K, Liu M, Liu P, Bai J, Tyson TA, Liu M (2011) Promotion of water-mediated carbon removal by nanostructured barium oxide/nickel interfaces in solid oxide fuel cells. Nat Commun 2:357
4. Zhe C, Wang JH, Choi YM, Yang L, Lin MC, Liu M (2011) From Ni-YSZ to sulfur-tolerant anodes: electrochemical behavior, modeling, in situ characterization, and perspectives. Energy Environ Sci Perspect Rev 4:4380-4409
5. Singhal SC (2000) Science and technology of solid-oxide fuel cells. MRS Bull 25(3):16-21
6. Liu M, Lynch ME, Blinn K, Alamgir F, Choi Y (2011) Rational SOFC material design: new advances and tools. Mat Today Invited Rev 14:534-546
7. http://science.nasa.gov/headlines/y2003/18mar_fuelcell.htm
8. http://www.doitpoms.ac.uk/tlplib/fuel-cells/high_temp_sofc.php
9. http://www.aki.che.tohoku.ac.jp/koyama/html/research/SOFC.html
10. Ormerod RM (2003) Solid oxide fuel cells. Chem Soc Rev 32(1):17-28
11. Xia CR, Liu ML (2002) Novel cathodes for low-temperature solid oxide fuel cells. Adv Mat 14(7):521
12. (2005) 2004 fuel cell handbook: advanced technology for generating electricity series on renewable energy, biofuels, bioenergy, and biobased products, US Department of Energy, 7th edn. Progressive Management
13. http://www.doitpoms.ac.uk/tlplib/fuel-cells/sofc_electrode_materials.php
14. Pierre AC (1998) Introduction to sol-gel processing. Springer, London
15. Brinker CJ, Scherer GW (1990) Sol-gel science: the physics and chemistry of sol-gel processing, 1st edn. Academic Press
16. Mehrotra RC (1989) In: Aegerter MA, Souza Jr., DF, Zanotto ED (eds) Sol-gel science and technology. World Scientific Publishing Company, Singapore
17. Viazzi C, Deboni A, Ferreira JZ, Bonino JP, Ansart F (2006) Synthesis of Yttria Stabilized Zirconia by sol-gel route: Influence of experimental parameters and large scale production. Solid State Sci 8(9):1023-1028
18. Laberty-Robert C, Ansart F, Deloget C, Gaudon M, Rousset A (2001) Powder synthesis of nanocrystalline ZrO2-8%Y2O3 via a polymerization route. Mat Res Bull 36(12): 2083-2101
19. y/2 electrolytes for IT-SOFC operation at 500 degrees C. Solid State Ion 129(1-4):95-110
20. 1.95 electrolyte by novel sol-gel thermolysis process for IT-SOFCs. J Eur Ceram Soc 28(16):3107-3112
21. Mogensen M, Sammes NM, Tompsett GA (2000) Physical chemical and electrochemical properties of pure and doped ceria. Solid State Ion 129(1-4):63-94
22. 3+δ(0 <= x <= 0.6) powder by sol-gel processing. Solid State Sci 4(1):125-133
23. 3-δ-SDC cathode for IT- SOFC. J Alloy Compd 453(1-2):356-360
24. Lenormand P, Castillo S, Gonzalez JR, Laberty-Robert C, Ansart F (2005) Lanthanum ferromanganites thin films by sol-gel process. Influence of the organic/inorganic R ratio on the microstructural properties. Solid State Sci 7(2):159-163
25. 3 nanoceramic cathode powders for solid oxide fuel cell (SOFC) application. Int J Hydrogen Energy 35(17):9411-9419
26. 3 nanoparticles for intermediate-low temperature solid oxide fuel cell cathodes. Water Dyn 987:35-38
27. 3-δ (0.2 <= x <= 0.6) cathode materials for intermediate-temperature solid oxide fuel cells. J Power Sources 183(2):581-585
28. δ) (Ln = La, Pr, Sm) Perovskites for oxygen activation at intermediate temperatures. Fuel Cells 9(5):663-678
29. 3-δ IT-SOFC Cathodes by Ternary Lanthanide Combinations (La-Pr-Sm). Fuel Cells 10(4):693-702
30. 3-δ-delta by B-site low concentration scandium doping combined with sol-gel synthesis. J Alloy Compd 455(1-2):465-470
31. Shao ZP, Haile SM (2004) A high-performance cathode for the next generation of solidoxide fuel cells. Nature 431(7005):170-173
32. δ as cathode material in IT-SOFCs. J Alloy Compd 395(1-2):300-303
33. 5+δ cathode. J Power Sources 194(2):835-837
34. 5+δ as a potential cathode for intermediate- temperature solid oxide fuel cells. J Power Sources 195(2):453-456
35. 5+δ as Cathode Material for Doped Lanthanum Gallate Electrolyte IT-SOFCs. Fuel Cells 8(5):351-359
36. 4+δ delta materials as new cathodes for solid oxide fuel cells. Electrochim Acta 54(26):6341-6346
37. 4+δ (x > = 0) interlayers for SOFC: Control of the microstructure via a sol-gel process. J Power Sources 156(1):33-38
38. Livage J, Henry M, Sanchez C (1988) Sol-Gel Chemistry of Transition-Metal Oxides. Prog Solid State Chem 18(4):259-341
39. Shimizu Y, Murata T (1997) Sol-gel synthesis of perovskite-type lanthanum manganite thin films and fine powders using metal acetylacetonate and poly(vinyl alcohol). J Am Ceram Soc 80(10):2702-2704
40. Zhou W, Ran R, Shao ZP, Jin WQ, Xu NP (2010) Synthesis of nano-particle and highly porous conducting perovskites from simple in situ sol-gel derived carbon templating process. Bull Mat Sci 33(4):371-376
41. Suciu C, Hoffmann AC, Dorolti E, Tetean R (2008) NiO/YSZ nanoparticles obtained by new sol-gel route. Chem Eng J 140(1-3):586-592
42. Jiang SP, Chan SH (2004) A review of anode materials development in solid oxide fuel cells. J Mater Sci 39(14):4405-4439
43. Wilson JR, Kobsiriphat W, Mendoza R, Chen HY, Hiller JM, Miller DJ, Thornton K, Voorhees PW, Adler SB, Barnett SA (2006) Three-dimensional reconstruction of a solidoxide fuel-cell anode. Nat Mater 5(7):541-544
44. Wilkenhoener R, Vassen R, Buchkremer HP, Stover D (1999) Mechanically alloyed Ni/8YSZ powder mixtures: preparation, powder characterization and sintering behavior. J Mat Sci 34(2):257-265
45. Sun CW, Stimming U (2007) Recent anode advances in solid oxide fuel cells. J Power Sources 171(2):247-260
46. Jacobson AJ (2010) Materials for solid oxide fuel cells. Chem Mat 22(3):660-674
47. Tao SW, Irvine JTS (2003) A redox-stable efficient anode for solid-oxide fuel cells. Nat Mater 2(5):320-323
48. 3-δ + Cu composite anode running on H2 and CH4 fuels. Solid State Ion 177(13-14):1211-1217
49. 3-δ impregnated anodes. J Power Sources 195(7):1793-1798
50. Fu XZ, Melnik J, Low QX, Luo JL, Chuang KT, Sanger AR, Yang QM (2010) Surface modified Ni foam as current collector for syngas solid oxide fuel cells with perovskite anode catalyst. Int J Hydrogen Energy 35(20):11180-11187
51. 1.9 composite anode under anodic polarization. J Electrochem Soc 154(11):B1206-B1210
52. 3 nano powders by sol-gel process for solid oxide fuel cell (SOFC) application. J New Mater Electrochem Syst 13(2):99-106
53. Stover D, Buchkremer HP, Uhlenbruck S (2004) Processing and properties of the ceramic conductive multilayer device solid oxide fuel cell (SOFC). Ceram Int 30(7): 1107-1113
54. Kueper TW, Visco SJ, De Jonghe LC (1992) Thin-film ceramic electrolytes deposited on porous and non-porous substrates by sol-gel techniques. Solid State Ion 52(1-3):251-259
55. Van Gestel T, Sebold D, Meulenberg WA, Buchkremer H-P (2008) Development of thin- film nano-structured electrolyte layers for application in anode-supported solid oxide fuel cells. Solid State Ion 179(11-12):428-437
56. Pan Y, Zhu JH, Hu MZ, Payzant EA (2005) Processing of YSZ thin films on dense and porous substrates. Surf Coat Technol 200(5-6):1242-1247
57. Peshev P, Slavova V (1992) Preparation of Yttria-stabilized Zirconia thin-films by a sol-gel procedure using alkoxide precursors. Mat Res Bull 27(11):1269-1275
58. Gaudon M, Laberty-Robert C, Ansart F, Stevens P (2006) Thick YSZ films prepared via a modified sol-gel route: thickness control (8-80 pm). J Eur Ceram Soc 26(15):3153-3160
59. Egger P, Soraru GD, Dire S (2004) Sol-gel synthesis of polymer-YSZ hybrid materials for SOFC technology. J Eur Ceram Soc 24(6):1371-1374
60. Lenormand P, Rieu M, Cienfuegos RF, Julbe A, Castillo S, Ansart F (2008) Potentialities of the sol-gel route to develop cathode and electrolyte thick layers Application to SOFC systems. Surf Coat Technol 203(5-7):901-904
61. Vo NXP, Yoon SP, Nam SW, Han J, Lim TH, Hong SA (2005) Fabrication of an anode- supported SOFC with a sol-gel coating method for a mixed-gas fuel cell. On the Convergence of Bio-Information,- Environmental-, Energy- Space- and Nano-Technologies, Pts 1 and 2, 277(-279):455-461
62. Chen YY, Wei WCJ (2006) Processing and characterization of ultra-thin yttria-stabilized zirconia (YSZ) electrolytic films for SOFC. Solid State Ion 177(3-4):351-357
63. Agarwal V, Liu ML (1997) Preparation of barium cerate-based thin films using a modified Pechini process. J Mater Sci 32(3):619-625
64. 2 films prepared by the sol-gel method. Solid State Ion 104(3-4):259-266
65. Mehta K, Xu R, Virkar AV (1998) Two-layer fuel cell electrolyte structure by sol-gel processing. J Sol-Gel Sci Technol 11(2):203-207
66. Jang WS, Hyun SH, Kim SG (2002) Preparation of YSZ/YDC and YSZ/GDC composite electrolytes by the tape casting and sol-gel dip-drawing coating method for low-temperature SOFC. J Mater Sci 37(12):2535-2541
67. Kim SG, Yoon SP, Nam SW, Hyun SH, Hong SA (2002) Fabrication and characterization of a YSZ/YDC composite electrolyte by a sol-gel coating method. J Power Sources 110(1): 222-228
68. Rose L, Kesler O, Tang ZL, Burgess A (2007) Application of sol gel spin coated yttria- stabilized zirconia layers for the improvement of solid oxide fuel cell electrolytes produced by atmospheric plasma spraying. J Power Sources 167(2):340-348
69. Kim SD, Hyun SH, Moon J, Kim JH, Song RH (2005) Fabrication and characterization of anode-supported electrolyte thin films for intermediate temperature solid oxide fuel cells. J Power Sources 139(1-2):67-72
70. Moon J, Song HS, Kim WH, Hyun SH, Kim J, Lee HW (2007) Effect of starting particulate materials on microstructure and cathodic performance of nanoporous LSM-YSZ composite cathodes. J Power Sources 167(2):258-264
71. Xia CR, Zhang YL, Liu ML (2003) LSM-GDC composite cathodes derived from a sol-gel process - Effect of microstructure on interfacial polarization resistance. Electrochem Solid State Lett 6(12):A290-A292
72. Zha SW, Zhang YL, Liu ML (2005) Functionally graded cathodes fabricated by sol-gel/slurry coating for honeycomb SOFCs. Solid State Ion 176(1-2):25-31
73. 3 film. J Power Sources 157(1):385-388
74. 3 cathode modified by sol-gel coating technique. J Power Sources 106(1-2):160-166
75. Sholklapper TZ, Lu C, Jacobson CP, Visco SJ, De Jonghe LC (2006) LSM-infiltrated solid oxide fuel cell cathodes. Electrochem Solid State Lett 9(8):A376-A378
76. Zhang Q, Martin BE, Petric A (2008) Solid oxide fuel cell composite cathodes prepared by infiltration of copper manganese spinel into porous yttria stabilized zirconia. J Mat Chem 18(36):4341-4346
77. Matus YB, De Jonghe LC, Jacobson CP, Visco SJ (2005) Metal-supported solid oxide fuel cell membranes for rapid thermal cycling. Solid State Ion 176(5-6):443-449
78. Tucker MC (2010) Progress in metal-supported solid oxide fuel cells: A review. J Power Sources 195(15):4570-4582
79. Rieu M, Lenormand P, Panteix PJ, Ansart F (2008) New route to prepare anodic coatings on dense and porous metallic supports for SOFC application. Fuel Cells Bull 2008(12): 12-15
80. Rieu M, Lenormand P, Ansart F, Mauvy F, Fullenwarth J, Zahid M (2008) Preparation of Ni-YSZ thin and thick films on metallic interconnects as cell supports. Applications as anode for SOFC. J Sol-Gel Sci Technol 45(3):307-313
81. Marrero-Lopez D, Ruiz-Morales JC, Pena-Martinez J, Canales-Vazquez J, Nunez P (2008) Preparation of thin layer materials with macroporous microstructure for SOFC applications. J Solid State Chem 181(4):685-692
82. Jiang SP (2002) A comparison of O-2 reduction reactions on porous (La, Sr)MnO3 and (La, Sr)(Co, Fe)O-3 electrodes. Solid State Ion 146(1-2):1-22
83. Murray EP, Sever MJ, Barnett SA (2002) Electrochemical performance of (La, Sr) (Co, Fe)O-3-(Ce, Gd)O-3 composite cathodes. Solid State Ion 148(1-2):27-34
84. Yang L, Liu Z, Wang SZ, Choi YM, Zuo CD, Liu ML (2010) A mixed proton, oxygen ion, and electron conducting cathode for SOFCs based on oxide proton conductors. Journal of Power Sources 195(2):471-474
85. 3-δ -delta. Solid State Ion 121(1-4):201-208
86. δ -delta electrodes. Part I: Reaction model and faradaic impedance. J Electroceram 18(1-2):87-101
87. δ -delta (LSCF) films for fundamental studies of SOFC cathodes. J Power Sources 190(2):307-310
88. 3SOFC cathodes. Electrochem Solid State Lett 9(10):A478-A481
89. δ cathode used in solid oxide fuel cells. J Electrochem Soc 153(5):A880-A886
90. 3-δ in carbon dioxide and water atmospheres. J Electrochem Soc 146(4):1305-1309
91. Liu M, Liu Z, Liu MF, Nie LF, Mebane DS, Wilson DS, Surdoval W (2010) Solid oxide fuel cells having porous cathodes infiltrated with oxygen-reducing catalysts, US Patent Application No. 12/837,757
92. 3±δ investigated using a new test electrode platform. Energy Environ Sci 4(6):2249
93. δ coating. Solid State Ion 180(23-25):1285-1289
94. 3-δ cathodes infiltrated with samarium-doped cerium oxide for solid oxide fuel cells. J Power Sources 195(15): 4704-4708
95. δ (LSM) thin films and LSM/LSCF interface for solid oxide fuel cells. J Am Ceram Soc 94(10):3340-3345
96. Singhal SC (2000) Advances in solid oxide fuel cell technology. Solid State Ion 135(1-4): 305-313
97. Gong MY, Liu XB, Trembly J, Johnson C (2007) Sulfur-tolerant anode materials for solid oxide fuel cell application. J Power Sources 168(2):289-298
98. Atkinson A, Barnett S, Gorte RJ, Irvine JTS, Mcevoy AJ, Mogensen M, Singhal SC, Vohs J (2004) Advanced anodes for high-temperature fuel cells. Nat Mater 3(1):17-27
99. Park SD, Vohs JM, Gorte RJ (2000) Direct oxidation of hydrocarbons in a solid-oxide fuel cell. Nature 404(6775):265-267
100. Gorte RJ, Vohs JM (2003) Novel SOFC anodes for the direct electrochemical oxidation of hydrocarbons. J Catal 216(1-2):477-486
101. Lu C, Worrell WL, Gorte RJ, Vohs JM (2003) SOFCs for direct oxidation of hydrocarbon fuels with samaria-doped ceria electrolyte. J Electrochem Soc 150(3):A354-A358
102. Huang YH, Dass RI, Xing ZL, Goodenough JB (2006) Double perovskites as anode materials for solid-oxide fuel cells. Science 312(5771):254-257
103. 3 support. J Power Sources 185(2):1086-1093
104. Pillai MR, Jiang Y, Mansourian N, Kim I, Bierschenk DM, Zhu HY, Kee RJ, Barnett SA (2008) Solid oxide fuel cell with oxide anode-side support. Electrochem Solid State Lett 11(10):B174-B177
105. 3-delta-δ perovskites as anode materials for solid oxide fuel cells. J Electrochem Soc 153(4):D74-D83
106. Yoon SP, Han J, Nam SW, Lim TH, Hong SA (2004) Improvement of anode performance by surface modification for solid oxide fuel cell running on hydrocarbon fuel. J Power Sources 136(1):30-36
107. 3- based coatings on ferritic stainless steel for solid oxide fuel cell interconnect applications. Surf Coat Technol 177:65-72
108. 4 protective coating for metallic interconnects of solid oxide fuel cells. J Power Sources 195(21): 7375-7379
109. 4 coating on Fe-21Cr alloy. Int J Hydrogen Energy 36(9):5611-5616
110. Hua B, Kong YH, Lu FS, Zhang JF, Pu JA, Li JA (2010) The electrical property of MnCo2O4 and its application for SUS 430 metallic interconnect. Chin Sci Bull 55(33): 3831-3837