3D artificial bones for bone repair prepared by computed tomography-guided fused deposition modeling for bone repair

ACS Applied Materials and Interfaces

Volumn 6, Issue 17, 2014, Pages 14952-14963

  Xu, Ning ^a   Ye, Xiaojian ^a   Wei, Daixu ^b   Zhong, Jian ^b   Chen, Yuyun ^b   Xu, Guohua ^a   He, Dannong ^b  

^a SECOND MILITARY MEDICAL UNIVERSITY   (China)

^b SHANGHAI JIAO TONG UNIVERSITY   (China)

Author keywords

bone segmental defect repair; computed tomography guided fused deposition modeling; hydroxyapatite composite; in vivo test; polycaprolactone

Indexed keywords

BIOCOMPATIBILITY; BIODEGRADATION; BIOMECHANICS; COMPUTERIZED TOMOGRAPHY; DEFECTS; DEPOSITION; FUSED DEPOSITION MODELING; HYDROXYAPATITE; LAYERED MANUFACTURING; PATIENT TREATMENT; POLYCAPROLACTONE; REPAIR;

ARTIFICIAL BONES; BONE FORMATION; FUSED DEPOSITION MODELING (FDM); HYDROXYAPATITE COMPOSITE; IN-VIVO TESTS; LOW COST METHODS; MEDICAL COMMUNITY; SEGMENTAL DEFECTS;

BONE;

BIOMATERIAL; HYDROXYAPATITE; NANOPARTICLE;

ANIMAL; BONE; CELL LINE; CHEMISTRY; COMPRESSIVE STRENGTH; COMPUTER ASSISTED TOMOGRAPHY; GOAT; INFRARED SPECTROSCOPY; MOUSE; PATHOLOGY; POROSITY; PROCEDURES; PROSTHESIS IMPLANTATION; RADIOGRAPHY; THEORETICAL MODEL; TISSUE ENGINEERING; WOUND HEALING; X RAY DIFFRACTION; YOUNG MODULUS;

ANIMALS; BIOCOMPATIBLE MATERIALS; BONE AND BONES; CELL LINE; COMPRESSIVE STRENGTH; DURAPATITE; ELASTIC MODULUS; GOATS; MICE; MODELS, THEORETICAL; NANOPARTICLES; POROSITY; PROSTHESIS IMPLANTATION; SPECTROSCOPY, FOURIER TRANSFORM INFRARED; TISSUE ENGINEERING; TOMOGRAPHY, X-RAY COMPUTED; WOUND HEALING; X-RAY DIFFRACTION;

EID: 84907835321     PISSN: 19448244     EISSN: 19448252     Source Type: Journal    
DOI: 10.1021/am502716t     Document Type: Article

References (64)

1. Dimitriou, R.; Jones, E.; McGonagle, D.; Giannoudis, P. Bone Regeneration: Current Concepts and Future Directions BMC Med. 2011, 9, 66
2. Berner, A.; Reichert, J.; Müller, M.; Zellner, J.; Pfeifer, C.; Dienstknecht, T.; Nerlich, M.; Sommerville, S.; Dickinson, I.; Schütz, M.; Füchtmeier, B. Treatment of Long Bone Defects and Non-unions: from Research to Clinical Practice Cell Tissue Res. 2012, 347, 501-519
3. Zeitouni, S.; Krause, U.; Clough, B. H.; Halderman, H.; Falster, A.; Blalock, D. T.; Chaput, C. D.; Sampson, H. W.; Gregory, C. A. Human Mesenchymal Stem Cell-Derived Matrices for Enhanced Osteoregeneration Sci. Transl. Med. 2012, 4, 132ra55
4. Giannoudis, P. V.; Dinopoulos, H.; Tsiridis, E. Bone Substitutes: An Update Injury 2005, 36, S20-S27
5. Pape, H. C.; Evans, A.; Kobbe, P. Autologous Bone Graft: Properties and Techniques J. Orthop. trauma 2010, 24, S36-40
6. Marsh, D. Concepts of Fracture Union, Delayed Union, and Nonunion Clin. Orthop. Relat. Res. 1998, 355, S22-S30
7. United States Bone and Joint Decade: The Burden of Musculoskeletal Diseases and Musculoskeletal Injuries in the United States; American Academy of Orthopedic Surgeons: Rosemont, IL, 2008; http://www.boneandjointburden.org/ (accessed August 14, 2014).
8. Rho, J.-Y.; Kuhn-Spearing, L.; Zioupos, P. Mechanical Properties and the Hierarchical Structure of Bone Med. Eng. Phys. 1998, 20, 92-102
9. Sopyan, I.; Mel, M.; Ramesh, S.; Khalid, K. A. Porous Hydroxyapatite for Artificial Bone Applications Sci. Technol. Adv. Mater. 2007, 8, 116-123
10. Yuan, J.; Cui, L.; Zhang, W. J.; Liu, W.; Cao, Y. Repair of Canine Mandibular Bone Defects with Bone Marrow Stromal Cells and Porous β-tricalcium Phosphate Biomaterials 2007, 28, 1005-1013
11. Kikuchi, M.; Itoh, S.; Ichinose, S.; Shinomiya, K.; Tanaka, J. Self-organization Mechanism in a Bone-like Hydroxyapatite/collagen Nanocomposite Synthesized In Vitro and its Biological Reaction In Vivo Biomaterials 2001, 22, 1705-1711
12. Lei, Y.; Rai, B.; Ho, K. H.; Teoh, S. H. In Vitro Degradation of Novel Bioactive Polycaprolactone-20% Tricalcium Phosphate Composite Scaffolds for Bone Engineering Mater. Sci. Eng., C 2007, 27, 293-298
13. Liu, H.; Peng, H.; Wu, Y.; Zhang, C.; Cai, Y.; Xu, G.; Li, Q.; Chen, X.; Ji, J.; Zhang, Y.; OuYang, H. W. The Promotion of Bone Regeneration by Nanofibrous Hydroxyapatite/chitosan Scaffolds by Effects on Integrin-BMP/Smad Signaling Pathway in BMSCs Biomaterials 2013, 34, 4404-4417
14. Reichert, J. C.; Cipitria, A.; Epari, D. R.; Saifzadeh, S.; Krishnakanth, P.; Berner, A.; Woodruff, M. A.; Schell, H.; Mehta, M.; Schuetz, M. A.; Duda, G. N.; Hutmacher, D. W. A Tissue Engineering Solution for Segmental Defect Regeneration in Load-Bearing Long Bones Sci. Transl. Med. 2012, 4, 141ra93
15. Kumar, S.; Kruth, J. P. Composites by Rapid Prototyping Technology Mater. Des. 2010, 31, 850-856
16. Lantada, A. D.; Morgado, P. L. Rapid Prototyping for Biomedical Engineering: Current Capabilities and Challenges Annu. Rev. Biomed. Eng. 2012, 14, 73-96
17. Zein, I.; Hutmacher, D. W.; Tan, K. C.; Teoh, S. H. Fused Deposition Modeling of Novel Scaffold Architectures for Tissue Engineering Applications Biomaterials 2002, 23, 1169-1185
18. Hutmacher, D. W.; Schantz, T.; Zein, I.; Ng, K. W.; Teoh, S. H.; Tan, K. C. Mechanical Properties and Cell Cultural Response of Polycaprolactone Scaffolds Designed and Fabricated via Fused Deposition Modeling J. Biomed. Mater. Res. 2001, 55, 203-216
19. Meakin, J. R.; Shepherd, D. E. T.; Hukins, D. W. L. Fused Deposition Models from CT Scans Br. J. Radiol. 2004, 77, 504-507
20. Tuan, H. S.; Hutmacher, D. W. Application of Micro CT and Computation Modeling in Bone Tissue Engineering Comput. Aided Des. 2005, 37, 1151-1161
21. Zeng, W.; Lin, F.; Shi, T.; Zhang, R.; Nian, Y.; Ruan, J.; Zhou, T. Fused Deposition Modelling of an Auricle Framework for Microtia Reconstruction based on CT Images Rapid Prototyping J. 2008, 14, 280-284
22. Tellis, B. C.; Szivek, J. A.; Bliss, C. L.; Margolis, D. S.; Vaidyanathan, R. K.; Calvert, P. Trabecular Scaffolds Created using Micro CT Guided Fused Deposition Modeling Mater. Sci. Eng., C 2008, 28, 171-178
23. Fan, C.; Li, J.; Xu, G.; He, H.; Ye, X.; Chen, Y.; Sheng, X.; Fu, J.; He, D. Facile Fabrication of Nano-hydroxyapatite/silk Fibroin Composite via a Simplified Coprecipitation Route J. Mater. Sci. 2010, 45, 5814-5819
24. Sun, G.; Wei, D.; Liu, X.; Chen, Y.; Li, M.; He, D.; Zhong, J. Novel Biodegradable Electrospun Nanofibrous P(DLLA-CL) Balloons for the Treatment of Vertebral Compression Fractures Nanomedicine (N. Y., NY, U. S.) 2013, 9, 829-838
25. Lucas-Girot, A.; Langlois, P.; Sangleboeuf, J. C.; Ouammou, A.; Rouxel, T.; Gaude, J. A Synthetic Aragonite-based Bioceramic: Influence of Process Parameters on Porosity and Compressive Strength Biomaterials 2002, 23, 503-510
26. Gomes, F. O.; Pires, R. A.; Reis, R. L. Aluminum-free Glass-ionomer Bone Cements with Enhanced Bioactivity and Biodegradability Mater. Sci. Eng., C 2013, 33, 1361-1370
27. Cheng, S.-T.; Chen, Z.-F.; Chen, G.-Q. The Expression of Cross-linked Elastin by Rabbit Blood Vessel Smooth Muscle Cells Cultured in Polyhydroxyalkanoate Scaffolds Biomaterials 2008, 29, 4187-4194
28. Park, S.; Lee, S.; Kim, W. Fabrication of Porous Polycaprolactone/Hydroxyapatite (PCL/HA) Blend Scaffolds using a 3D Plotting System for Bone Tissue Engineering Bioprocess Biosyst. Eng. 2011, 34, 505-513
29. Pilia, M.; Guda, T.; Appleford, M. Development of Composite Scaffolds for Load-Bearing Segmental Bone Defects BioMed. Res. Int. 2013, 2013, 15
30. Eshraghi, S.; Das, S. Mechanical and Microstructural Properties of Polycaprolactone Scaffolds with One-Dimensional, Two-Dimensional, and Three-Dimensional Orthogonally Oriented Porous Architectures Produced by Selective Laser Sintering Acta Biomater. 2010, 6, 2467-2476
31. Nejati, E.; Mirzadeh, H.; Zandi, M. Synthesis and Characterization of Nano-hydroxyapatite Rods/Poly(l-lactide acid) Composite Scaffolds for Bone Tissue Engineering Composites, Part A 2008, 39, 1589-1596
32. Sun, H.; Mei, L.; Song, C.; Cui, X.; Wang, P. The In Vivo Degradation, Absorption and Excretion of PCL-Based Implant Biomaterials 2006, 27, 1735-1740
33. Implantable Medical Devices: US Industry Forecasts for 2014 & 2019; The Freedonia Group: Cleveland, OH, 2010; http://www.freedoniagroup.com/brochure/25xx/2595embro.pdf (accessed August 14, 2014).
34. Wähnert, D.; Hoffmeier, K. L.; Klos, K.; Stolarczyk, Y.; Fröber, R.; Hofmann, G. O.; Mückley, T. Biomechanical Characterization of an Osteoporotic Artificial Bone Model for the Distal Femur J. Biomater. Appl. 2012, 26, 565-579
35. Williams, D. F. On the Mechanisms of Biocompatibility Biomaterials 2008, 29, 2941-2953
36. Sinha, V. R.; Bansal, K.; Kaushik, R.; Kumria, R.; Trehan, A. Poly-ε-Caprolactone Microspheres and Nanospheres: an Overview Int. J. Pharm. 2004, 278, 1-23
37. Tsiridis, E.; Bhalla, A.; Ali, Z.; Gurav, N.; Heliotis, M.; Deb, S.; DiSilvio, L. Enhancing the Osteoinductive Properties of Hydroxyapatite by the Addition of Human Mesenchymal Stem Cells, and Recombinant Human Osteogenic Protein-1 (BMP-7) In Vitro Injury 2006, 37, S25-S32
38. Williams, D. F. Mechanisms of Biodegradation of Implantable Polymers Clin. Mater. 1992, 10, 9-12
39. Coombes, A. G. A.; Meikle, M. C. Resorbable Synthetic Polymers as Replacements for Bone Graft Clin. Mater. 1994, 17, 35-67
40. Zhang, D.; Zhao, H.; Zhao, X.; Liu, Y.; Chen, H.; Li, X. Application of Hydroxyapatite as Catalyst and Catalyst Carrier Huaxue Jinzhan 2011, 23, 687-694
41. Arinzeh, T. L.; Tran, T.; McAlary, J.; Daculsi, G. A Comparative Study of Biphasic Calcium Phosphate Ceramics for Human Mesenchymal Stem-Cell-Induced Bone Formation Biomaterials 2005, 26, 3631-3638
42. Messersmith, P. B.; Giannelis, E. P. Synthesis and Barrier Properties of Poly(ε-caprolactone)-Layered Silicate Nanocomposites J. Polym. Sci., Part A: Polym. Chem. 1995, 33, 1047-1057
43. Hench, L. L. Bioceramics J. Am. Ceram. Soc. 1998, 81, 1705-1728
44. Ding, S.-J.; Shie, M.-Y.; Wei, C.-K. In Vitro Physicochemical Properties, Osteogenic Activity, and Immunocompatibility of Calcium Silicate-Gelatin Bone Grafts for Load-Bearing Applications ACS Appl. Mater. Interfaces 2011, 3, 4142-4153
45. Baino, F.; Verné, E.; Vitale-Brovarone, C. 3-D High-strength Glass-ceramic Scaffolds Containing Fluoroapatite for Load-bearing Bone Portions Replacement Mater. Sci. Eng., C 2009, 29, 2055-2062
46. Ramay, H. R. R.; Zhang, M. Biphasic Calcium Phosphate Nanocomposite Porous Scaffolds for Load-bearing Bone Tissue Engineering Biomaterials 2004, 25, 5171-5180
47. Wang, H.; Li, Y.; Zuo, Y.; Li, J.; Ma, S.; Cheng, L. Biocompatibility and Osteogenesis of Biomimetic Nano-hydroxyapatite/Polyamide Composite Scaffolds for Bone Tissue Engineering Biomaterials 2007, 28, 3338-3348
48. Cao, H.; Kuboyama, N. A Biodegradable Porous Composite Scaffold of PGA/β-TCP for Bone Tissue Engineering Bone 2010, 46, 386-395
49. Chu, T.-M. G.; Warden, S. J.; Turner, C. H.; Stewart, R. L. Segmental Bone Regeneration using a Load-bearing Biodegradable Carrier of Bone Morphogenetic Protein-2 Biomaterials 2007, 28, 459-467
50. Rai, B.; Lin, J. L.; Lim, Z. X. H.; Guldberg, R. E.; Hutmacher, D. W.; Cool, S. M. Differences between In Vitro Viability and Differentiation and In Vivo Bone-forming Efficacy of Human Mesenchymal Stem Cells Cultured on PCL-TCP Scaffolds Biomaterials 2010, 31, 7960-7970
51. Chim, H.; Hutmacher, D. W.; Chou, A. M.; Oliveira, A. L.; Reis, R. L.; Lim, T. C.; Schantz, J. T. A Comparative Analysis of Scaffold Material Modifications for Load-bearing Applications in Bone Tissue Engineering Int. J. Oral Maxillofac. Surg. 2006, 35, 928-934
52. Roohani-Esfahani, S.-I.; Nouri-Khorasani, S.; Lu, Z.; Appleyard, R.; Zreiqat, H. The Influence Hydroxyapatite Nanoparticle Shape and Size on the Properties of Biphasic Calcium Phosphate Scaffolds Coated with Hydroxyapatite-PCL Composites Biomaterials 2010, 31, 5498-5509
53. Fabbri, P.; Cannillo, V.; Sola, A.; Dorigato, A.; Chiellini, F. Highly Porous Polycaprolactone-45S5 Bioglass® Scaffolds for Bone Tissue Engineering Compos. Sci. Technol. 2010, 70, 1869-1878
54. Wei, G.; Ma, P. X. Structure and Properties of Nano-hydroxyapatite/Polymer Composite Scaffolds for Bone Tissue Engineering Biomaterials 2004, 25, 4749-4757
55. Polini, A.; Pisignano, D.; Parodi, M.; Quarto, R.; Scaglione, S. Osteoinduction of Human Mesenchymal Stem Cells by Bioactive Composite Scaffolds without Supplemental Osteogenic Growth Factors PLoS One 2011, 6, e26211
56. Yu, H.; Wooley, P.; Yang, S.-Y. Biocompatibility of Poly-epsilon-caprolactone-hydroxyapatite Composite on Mouse Bone Marrow-derived Osteoblasts and Endothelial Cells J. Orthop. Surg. Res. 2009, 4, 5
57. Koh, Y.-H.; Jun, I.-K.; Kim, H.-E. Fabrication of Poly(ε-caprolactone)/hydroxyapatite Scaffold using Rapid Direct Deposition Mater. Lett. 2006, 60, 1184-1187
58. Bawolin, N. K.; Li, M. G.; Chen, X. B.; Zhang, W. J. Modeling Material-Degradation-Induced Elastic Property of Tissue Engineering Scaffolds J. Biomech. Eng. 2010, 132, 111001-111001
59. Shor, L.; Güçeri, S.; Wen, X.; Gandhi, M.; Sun, W. Fabrication of Three-dimensional Polycaprolactone/hydroxyapatite Tissue Scaffolds and Osteoblast-scaffold Interactions In Vitro Biomaterials 2007, 28, 5291-5297
60. Yeong, W. Y.; Sudarmadji, N.; Yu, H. Y.; Chua, C. K.; Leong, K. F.; Venkatraman, S. S.; Boey, Y. C. F.; Tan, L. P. Porous Polycaprolactone Scaffold for Cardiac Tissue Engineering Fabricated by Selective Laser Sintering Acta Biomater. 2010, 6, 2028-2034
61. Ding, C.; Qiao, Z.; Jiang, W.; Li, H.; Wei, J.; Zhou, G.; Dai, K. Regeneration of a Goat Femoral Head using a Tissue-specific, Biphasic Scaffold Fabricated with CAD/CAM Technology Biomaterials 2013, 34, 6706-6716
62. Murphy, C. M.; Haugh, M. G.; OBrien, F. J. The Effect of Mean Pore Size on Cell Attachment, Proliferation and Migration in Collagen-glycosaminoglycan Scaffolds for Bone Tissue Engineering Biomaterials 2010, 31, 461-466
63. Yaszemski, M. J.; Payne, R. G.; Hayes, W. C.; Langer, R.; Mikos, A. C. Evolution of Bone Transplantation: Molecular, Cellular, and Tissue Strategies to Engineer Human Bone Biomaterials 1996, 17, 175-185
64. Gerhart, T. N.; Renshaw, A. A.; Miller, R. L.; Noecker, R. J.; Hayes, W. C. In Vivo Histologic and Biomechanical Characterization of a Biodegradable Particulate Composite Bone Cement J. Biomed. Mater. Res. 1989, 23, 1-16