Corrosion of carbon and stainless steels in kraft digesters

NACE - International Corrosion Conference Series

Volumn 2000-March, Issue , 2000, Pages

  Wensley, Angela ^a  

^a Bacon Donaldson Consulting Engineers   (Canada)

Author keywords

Acid cleaning; Anodic protection; Corrosion; Digesters; Erosion corrosion; Intergranular attack; Pitting; Pulp and paper; Stress corrosion cracking; Thermal spray; Weld overlay

Indexed keywords

ANODIC PROTECTION; CARBON STEEL; CORROSION; CORROSION RESISTANT COATINGS; EROSION; INTERGRANULAR CORROSION; PULP DIGESTERS; RESIDUAL STRESSES; SPRAYED COATINGS; STEEL CORROSION; STRESS CORROSION CRACKING; THERMAL SPRAYING; WELD DECAY; WELDS;

ACID CLEANING; DUPLEX STAINLESS STEEL; EROSION - CORROSIONS; GENERAL CORROSION; PULP AND PAPER; STAINLESS STEEL WELDS; THERMAL SPRAY COATINGS; WELD OVERLAY;

PITTING;

EID: 84907537060     PISSN: 03614409     EISSN: None     Source Type: Book Series    
DOI: None     Document Type: Conference Paper

References (69)

1. J. J. Wegerif, Alkaline Digester Corrosion, Pulp Paper Mag. Can., Vol. 59, pp. 104-108 (1958).
2. R. A. Huseby and M. A. Scheil, Corrosion of Mild Steel and Mild Steel Welds in Sulphate Digesters, TAPPI J. 34 (4) 202-209 (1951).
3. B. Roald, Corrosion in Sulphate Digesters, Norsk. Skogind. Vol. 7 No. 11 pp. 382-388 (1953).
4. E. W. Hopper, Some Observations on the Causes and Prevention of Kraft Digester Corrosion, TAPPI J. Vol. 36 No. 8 pp. 345-352 (1953).
5. F. W. Flynn, F. H. Richter, F. B. Snyder, Uneven Corrosion in Alkaline Pulping Digesters, TAPPI J. Vol. 36 No. 10 pp. 433-444 (1953).
6. C. B. Christiansen and J. B. Lathrop, Field Investigation of Corrosion in Alkaline Pulping Equipment, Pulp Pap. Mag. Can. Vol. 55 pp. 113-119 (1954).
7. A. Ungar and T. E. Caywood, Comparative Analysis of Digester Corrosion Measurements, TAPPI J. Vol. 37 No. 3 pp. 177-190 (1954).
8. L. Stockman and L. Ruus, Corrosion in Sulphate Digesters, Svensk. Papperstidning Vol. 57 No. 22 pp. 831-838 (1954).
9. W. B. Parker, A Review of Digester Corrosion Causes, TAPPI J. Vol. 38 No. 5 pp. 261-264 (1955).
10. L. G. Pfeiffer, M. A. Scheil, and E. H. Schmidt, Design Features Affecting Digester Corrosion, TAPPI J. Vol. 38 No. 11 pp. 652-659 (1955).
11. S. Ostlund, Ernerfeldt, B. Sandberg, and M. Linder, Investigations Regarding Corrosion in Batch Digesters, Proc. Sixth Intl. Symp. on Corrosion in the Pulp and Paper Ind., Helsinki, pp. 48-59 (1989).
12. C.-G. Von Essen, Corrosion Problems in Sulphate Pulp Mills, TAPPI J. Vol. 33 No. 7 pp. 14A-32A (1950).
13. B. Haegland and B. Roald, The Corrosion of Steel in White Liquor, Norsk Skogindustri, Vol. 9 No. 10, pp. 351-364 (1955).
14. B. Roald, The Corrosivity of White Liquor, Norsk Skogindustri, Vol. 10 No. 8, pp. 285-289 (1956).
15. D. A. Wensley and R. S. Charlton, Corrosion Studies in Kraft Mill Liquor, Proc. Third Intl. Symposium on Corrosion in the Pulp & Paper Industry, Atlanta, pp. 20-29 (1980).
16. D. A. Wensley, Corrosion Studies in Kraft White Liquor Tanks, Proc. Fifth Intl. Symposium on Corrosion in the Pulp & Paper Industry, Vancouver, pp. 15-22 (1986).
17. A. Wensley, Effect of Sulfidity on the Corrosivity of White, Green, and Black Liquors, Paper. No. 281 presented at the NACE Corrosion 99 conference, San Antonio, TX (1999).
18. D. Singbeil, Stress Corrosion Cracking of Mild Steel in Alkaline Sulfide Solutions, Proc. Third Intl. Symposium on Corrosion in the Pulp and Paper Industry, Atlanta, pp. 40-46 (1980).
19. D. C. Bennett, Cracking in Continuous Digesters, TAPPI J. Vol. 65 No. 12 pp. 43-45 (1982).
20. D. C. Bennett, Cracking of Continuous Digesters - Review of History, Corrosion Engineering, Aspects and Factors Affecting Cracking, Proc. Fourth Intl. Symp. On Corrosion in the Pulp and Paper Ind., Stockholm, pp. 2-7 (1983).
21. O. Pichler, Stress Corrosion in the Pre-impregnation Vessel of a Continuous Kraft Digester, Proc. Fourth Intl. Symp. On Corrosion in the Pulp and Paper Ind., pp. 15-20 (1983).
22. N. J. Olson, R. H. Kilgore, M. J. Danielson, and K. H. Pool, Continuous Digester Stress Corrosion Cracking Results from a Two-vessel Kraft System, Proc. Fourth Intl. Symp. on Corrosion in the Pulp and Paper Ind., pp. 21-26 (1983).
23. R. Yeske, Stress Corrosion Cracking of Continuous Digesters for Kraft Pulping, a Final report to the Digester Cracking Research Committee, The Institute of Paper Chemistry project 3544, (January 1983).
24. P. E. Thomas and D. M. Whyte, Stress Corrosion Cracking in a Kraft Continuous Digester, Appita Vol. 37 No. 9 pp. 748-752 (1984).
25. D. Singbeil, Kraft Continuous Digester Cracking: Causes and Prevention, Pulp and Paper Can., Vol. 87 No. 3 pp. T93-T97 (1986).
26. D. Singbeil, Kraft Continuous Digester Cracking: A Critical Review, Proc. Fifth Intl. Symp. on Corrosion in the Pulp and Paper Ind., Vancouver, pp. 267-271 (1986).
27. R. Yeske, In-situ Studies of Stress Corrosion Cracking in Continuous Digesters, TAPPI J., Vol. 69 No. 5 pp. 104-108 (1986).
28. D. Crowe, Stress Corrosion Cracking of Carbon Steel in Kraft Digester Liquors, Proc. Sixth Intl. Symp. on Corrosion in the Pulp and Paper Ind., 35-47 (1989).
29. A. Wensley, Sixth Report of the Continuous Digester Cracking Task Group, Cracking of Continuous Digesters: An Updated Survey, TAPPI Journal, Vol. 72 No. 8, pp. 211-215 (1989).
30. A. Wensley, Seventh Report of the Continuous Digester Corrosion Task Group, Continuous Digester Thinning Survey, Proc. TAPPI Eng. Conference, pp. 71-74 (1993).
31. E. Maspers, General Corrosion In Continuous Digesters, Proc. Eighth Intl. Symp. on Corrosion in the Pulp and Paper Ind., Stockholm, pp. 1-11 (1995).
32. L. Keissling, A Study of the Influence of Modified Continuous Cooking Processes on the Corrosion of Continuous Digester Shells, Proc. Eighth Intl. Symp. on Corrosion in the Pulp and Paper Ind., Stockholm, pp. 12-19 (1995).
33. A. Wensley, Corrosion of Batch and Continuous Digesters, Proc. Ninth Intl. Symposium on Corrosion in the Pulp & Paper Industry, Ottawa, pp. 27-37 (1998).
34. D. C. Crowe, Corrosion in Acid Cleaning Solutions for Kraft Digesters, Proc. Seventh Intl. Symp. on Corrosion in the Pulp and Paper Ind., Orlando, pp. 33-40 (1992).
35. J.-P. Audouard, A. Desestret, G. Vallier, J. Chevassut, J.-P. Mader, Study and Development of Special Austenitic-Ferritic Stainless Steel Linings for Kraft Pulp Batch Digesters, Proc. Third Intl. Symp. on Corrosion in the Pulp and Paper Ind., Atlanta, pp. 30-39 (1980).
36. J.-P. Audouard, A New Special Austenitic-Ferritic Stainless Steel for Kraft Pulp Batch Digesters, Proc. Fourth Intl. Symp. on Corrosion in the Pulp and Paper Ind., Stockholm, pp. 43-47 (1983).
37. J.-P. Audouard, Duplex Stainless Steels for Kraft Pulp Batch Digesters - Welding and Corrosion Performance, Proc. Fifth Intl. Symp. on Corrosion in the Pulp and Paper Ind., Vancouver, pp. 193-199 (1986).
38. J.-P. Audouard, F. Dupoiron, and D. Jobard, Stainless Steels for Kraft Digesters in New Pollution Free Mills, Proc. Sixth Intl. Symp. on Corrosion in the Pulp and Paper Ind., Helsinki (1989).
39. A. Wensley, M. Moskal, and W. Wilton, Materials Selection for Batch Digesters, NACE Corrosion 97 Conf., Paper No. 378 (1997).
40. A. Wensley, and H. Dykstra, Corrosion of Batch Digesters, Proc. TAPPI Eng. and Papermakers Conf., pp. 1527-1536 (1997).
41. A. Wensley, Corrosion of Weld Overlay in Batch Digesters, Proc. TAPPI Eng. Conf., pp. 1193-1200 (1998).
42. D. A. Wensley, Corrosion Control in a Kraft Continuous Digester, Proc. Sixth Intl. Symp. on Corrosion in the Pulp and Paper Ind., Helsinki, pp. 7-19 (1989).
43. L. Troselius, Field Exposure of Carbon Steel and Stainless Steel in Digesters, Proc. Eighth Intl. Symp. on Corrosion in the Pulp and Paper Ind., Stockholm, pp. 46-57 (1995).
44. A. Wensley, Intergranular Attack of Stainless Steels in Kraft Digester Liquors, Paper No. 465, NACE Corrosion 96 Conference, (1996).
45. Ulf Kivisakk, "Stress Corrosion Cracking of Carbon Steel and Stainless Steel in White Liquor", Proc. Eighth Intl. Symposium on Corrosion in the Pulp and Paper Industry, Stockholm, pp. 38-45 (1995).
46. W. A. Mueller, Anodic Protection of Alkaline Pulping Digesters, Pulp. Paper Mag. Can. Vol. 60 pp. T3-T8 (1959).
47. T. R. B. Watson, Anodic Protection of Kraft Digesters, Materials Performance Vol. 3 No. 6 pp. 54-56 (1964).
48. W. P. Banks, M. Hutchison, and R. M., Hurd, Anodic Protection of Carbon Steel Alkaline Sulfide Pulp Digesters, TAPPI J. Vol. 50 No. 2 pp. 49-55 (1967).
49. J. I. Munro, Anodic Protection of Continuous Digesters to Prevent Corrosion and Cracking, Proc. TAPPI Eng. Conf., pp. 181-185 (1983).
50. H. Savisalo, M. Pullianen, T. Kerola, Corrosion of Kraft Continuous Digesting: The Results of In-Situ Electrochemical Testing, Proc. Fifth Intl. Symp. on Corrosion in the Pulp and Paper Ind., Vancouver, (1986).
51. D. Singbeil and A. Garner, Anodic Protection to Prevent the Stress Corrosion Cracking of Pressure Vessel Steels in Alkaline Sulfide Solutions, Materials Performance, Vol, 26 No. 4 pp. 31-36 (1987).
52. D. Singbeil, Does Anodic Protection Stop Digester Cracking?, Proc. Sixth Intl. Symp. on Corrosion in the Pulp and Paper Ind., Helsinki, pp. 109-116 (1989).
53. L. Kiessling., Application of an Anodic Protection System to a Preimpregnation Vessel, Proc. TAPPI Eng, Conf., pp. 659-666 (1989).
54. L. H. Boulton., G. Wallace, B. J. Barry, and D. Hodder, The Effects of Anodic Protection on Carbon Steel Corrosion Rates in a Kraft Pulp Digester as Measured by TLA, Proc. Sixth Intl. Symp. on Corrosion in the Pulp and Paper Ind., Helsinki, pp. 67-83 (1989).
55. M. Pullianen and H. Savisalo Experiences of Corrosion Control in Continuous Hydraulic and Two Vessel Digesters by Anodic Protection, Proc. Sixth Intl. Symp. on Corrosion in the Pulp and Paper Ind., Helsinki, (1989).
56. M. F. Frombach, Stainless Steel Overlay of Alkaline Digesters, Proc. Tech. Section CPPA, pp. D108-D117 (1962).
57. P. A. Kammer and H. F. Reid, Welded Overlays for Sulfate Digesters, Proc. 1st Intl. Symp. on Corrosion in the Pulp and Paper Ind., Chicago, pp. 144-149 (1974).
58. T. Erikkson, E. Borjesson, and L. Johansson, Experience from Overlay Welded Lining in Digesters, Proc. Eighth Intl. Symp. on Corrosion in the Pulp and Paper Ind., Stockholm, pp. 58-64 (1995).
59. R. Workman, Advances in Weld Overlay Technology Provide Corrosion Protection in Kraft Digesters, Proc. TAPPI Eng. Conf., pp. 173-176 (1995).
60. P. Hulsizer, Expedited Weld Overlay of Continuous Digesters, Proc. TAPPI Eng. Conf., pp. 193-202 (1995).
61. G. Lai and P. Hulsizer, Application of Type 312 Stainless Steel Weld Overlay for Corrosion Protection of Batch Digesters, Proc. TAPPI Eng. Conf., pp. 399-404 (1999).
62. Guidelines for Corrosion Resisting Weld Overlay in Sulphate and Soda Digester Vessels, TAPPI Technical Information Paper TIP 0403-02, TAPPI (1999).
63. A. Wensley, Corrosion in Digester Liquors, Proc. Eighth Intl. Symp. on Corrosion in the Pulp and Paper Ind., Stockholm, pp. 26-37 (1995).
64. A. Wensley, Corrosion Testing in Digester Liquors, Proc. TAPPI Eng. Conf., pp. 291-298 (1996).
65. P. H. Thorpe, Duplex Stainless Steel Pulp Digesters - Fabrication and User Experience in Australia and New Zealand, Proc. Eighth Intl. Symp. on Corrosion in the Pulp and Paper Ind., 20-25 (1995).
66. J.-P. Audouard, Corrosion Performance of Duplex Stainless Steels for Kraft Digester Applications, Proc. 5th World Congress and Exposition on Duplex Stainless Steels (1997).
67. J. Olsson, R. Leffler, and C. Jorgensen, Experiences of 2205 for Pulp Digesters and Other Pressure Vessels, Proc. Fifth World Congress and Exposition on Duplex Stainless Steels (1997).
68. M. Moskal, G. Cheetham, J. Paultre, and W. Wilton, Quality Requirements for Duplex Stainless Steel Digester Fabrication, Proc. 9th Intl. Symp. on Corrosion in the Pulp and Paper Ind., 67-73 (1998).
69. R. M. Davison and M. D. Moskal, Qualification of Welding Procedures for Duplex Stainless Steels, Proc. TAPPI Eng. Conf., pp. 379-398 (1999).